IFT-SNMP-MIB

All MIBs › IFT-SNMP-MIB

Organization: Infortrend Technology, Inc.

Last Updated: 2004-07-30

Category: Hardware Inventory

Description: Monitors and manages Infortrend RAID storage controller status and performance.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is IFT-SNMP-MIB?

IFT-SNMP-MIB is Infortrend's proprietary MIB module for its EonStor/ESDS RAID storage controller product line, exposing hardware inventory, firmware, and system health information for external-RAID and storage subsystems. It surfaces data such as controller CPU type, cache size, memory type, firmware and bootloader (boot ROM) version numbers, serial number, controller name/configuration, and an event log. It is explicitly used for hardware and software status monitoring, tracking firmware/bootloader version numbers for update compliance, controller configuration mode, and the event log for fault/error conditions reported by the RAID controller. There is no strong stated dependency on other standard MIBs; it is a fully self-contained vendor private tree. It is typically deployed in SAN/NAS environments where Infortrend RAID storage arrays are polled by storage management or monitoring systems for capacity, health, and firmware compliance using the IFT-SNMP-MIB MIB.

IPNetwork Monitor allows you to monitor SNMP objects defined in IFT-SNMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Infortrend EonStor/ESDS RAID storage controllers

Monitoring Examples

An administrator polling sysInformation and ctlrConfiguration can retrieve the controller's cpuType, cacheSize, and memoryType to confirm the hardware configuration matches expectations after a controller swap. Checking fwMajorVersion/fwMinorVersion/fwEngineerVersion against a known-good baseline flags controllers running outdated or mismatched firmware. Polling eventLog surfaces logged fault conditions (e.g., disk failures or cache battery issues) that require attention, and serialNum/ctlrName identify which physical unit reported them.

What Can Be Monitored

firmware version
bootloader version
controller CPU type and cache size
controller configuration mode
system event log
serial number/controller identity

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
infortrend	1.3.6.1.4.1.1714			Infortrend SNMP MIB
extInterface	1.3.6.1.4.1.1714.1			MIB of Infortrend External Interface Protocol(Draft: 2.26) and Generalized Target Configuration Protocol(Draft: 1.33)
ctlrConfiguration	1.3.6.1.4.1.1714.1.1
sysInformation	1.3.6.1.4.1.1714.1.1.1
OCT cpuType	1.3.6.1.4.1.1714.1.1.1.1	OCTET STRING	read-only	CPU type on RAID controller
I32 cacheSize	1.3.6.1.4.1.1714.1.1.1.2	Integer32	read-only	Cache size on RAID controller, in MB
I32 memoryType	1.3.6.1.4.1.1714.1.1.1.3	Integer32	read-only	Cache memory type on RAID controller 0: FPG, 1: EDO, 2: SDRAM, 3: ECC SDRAM
I32 fwMajorVersion	1.3.6.1.4.1.1714.1.1.1.4	Integer32	read-only	Firmware major version
I32 fwMinorVersion	1.3.6.1.4.1.1714.1.1.1.5	Integer32	read-only	Firmware minor version
I32 fwEngineerVersion	1.3.6.1.4.1.1714.1.1.1.6	Integer32	read-only	Firmware engineer version
I32 brMajorVersion	1.3.6.1.4.1.1714.1.1.1.7	Integer32	read-only	Bootrecord major version
I32 brMinorVersion	1.3.6.1.4.1.1714.1.1.1.8	Integer32	read-only	Bootrecord minor version
I32 brEngineerVersion	1.3.6.1.4.1.1714.1.1.1.9	Integer32	read-only	Bootrecord engineer version
I32 serialNum	1.3.6.1.4.1.1714.1.1.1.10	Integer32	read-only	Serial number
OCT ctlrName	1.3.6.1.4.1.1714.1.1.1.11	OCTET STRING	read-write	Controller name
I32 ctlrCfgModeFlags	1.3.6.1.4.1.1714.1.1.1.12	Integer32	read-write	Controller configuration mode flags BIT 0 : Write Back Status (RW) 0: Disabled, 1: Enabled. BIT 1 : Motor Spin Up (RW) 0: Disabled, 1: Enabled. BIT 2 : Power Up SCSI Reset (RW) 0: Disabled, 1: Enabled. BIT 8 : Battery Backup Supported (RO) 0: Not Supported, 1: Supported. BIT 9 : Battery Backup Present (RO) 0: Absent, 1: Present. BIT 12 : ECC Function 0: Disabled, 1: Enabled BIT 15 : JBOD Mode (RW) - This should be ignored if 'JBOD Mode Supported' is not set. 0: Disabled, 1: Enabled. BIT 16 : LUN Assignment by SCSI ID (RO) 0: Not Supported, 1: Supported. BIT 17 : Support SCSI LUN > 0 (RO) BIT 18 : Spanning Logical Drive Support 0: Not Supported, 1: Supported. BIT 19 : JBOD Mode Supported (RO) 0: Not Supported, 1: Supported. BIT 20 -- BIT 32 : Reserved.
OCT privateLogoString	1.3.6.1.4.1.1714.1.1.1.13	OCTET STRING	read-only	Private logo string
OCT privateLogoVendor	1.3.6.1.4.1.1714.1.1.1.14	OCTET STRING	read-only	Private logo vendor string
OCT privateLogoModel	1.3.6.1.4.1.1714.1.1.1.15	OCTET STRING	read-only	Private logo model string
I32 ctlrUniqueID	1.3.6.1.4.1.1714.1.1.1.16	Integer32	read-write	Controller unique identifier
cachingParams	1.3.6.1.4.1.1714.1.1.2
I32 cacheModeFlags	1.3.6.1.4.1.1714.1.1.2.1	Integer32	read-only	Caching mode flags BIT 0 : Write Back Status (RW) 0: Disabled, 1: Enabled. BIT 1 : Read Ahead Disable (RW) 0: Enabled, 1: Disabled. BIT 2 : Enable/Disable keeping LD/LV off-line after controller initialization if cached write data was lost (RW) 0: Disabled, 1: Enabled. BIT 3 -- BIT 7 : Reserved (Set to 0). BIT 8 : Cache Optimization Option (RW) 0: Small/Random I/Os, 1: Large/Sequential I/Os BIT 9 -- BIT 15 : Reserved (Set to 0). BIT 16 -- BIT 18 : Periodic Cache Sync Period (RW) For interpretation of values, reference 'Periodic Cache Sync Period Value Cross-Reference List'. BIT 19 -- BIT 21 : Cache Flush Initiation Threshold (RW) For interpretation of values, reference 'Cache Flush Initiation Threshold Valid Cross-Reference List'. BIT 22 -- BIT 25 : Cache Flush Termination Threshold (RW) For interpretation of values, reference 'Cache Flush Termination Threshold Valid Cross-Reference List'. BIT 26 -- BIT 31 : Reserved (Set to 0).
I32 cacheBlkSizeIdx	1.3.6.1.4.1.1714.1.1.2.2	Integer32	read-only	Cache block size index BIT 0 -- BIT 3 : Cache Block Size Index Block Size (bytes) = 512 * 2 ** (Block Size Index) BIT 4 -- BIT 7 : Reserved (Set to 0).
I32 cacheTotal	1.3.6.1.4.1.1714.1.1.2.3	Integer32	read-only	Total number of cache blocks
I32 cacheDirty	1.3.6.1.4.1.1714.1.1.2.4	Integer32	read-only	Number of dirty cache blocks
diskArrayParams	1.3.6.1.4.1.1714.1.1.3
I32 maxRebPriorityIdx	1.3.6.1.4.1.1714.1.1.3.1	Integer32	read-only	Maximum supported rebuild priority index 0: Low, 1: Normal, 2: Improved, 3: High
I32 minRebPriorityIdx	1.3.6.1.4.1.1714.1.1.3.2	Integer32	read-only	Minimum supported rebuild priority index 0: Low, 1: Normal, 2: Improved, 3: High
I32 defRebPriorityIdx	1.3.6.1.4.1.1714.1.1.3.3	Integer32	read-only	Default rebuild priority index 0: Low, 1: Normal, 2: Improved, 3: High
I32 curRebPriorityIdx	1.3.6.1.4.1.1714.1.1.3.4	Integer32	read-only	Current rebuild priority index 0: Low, 1: Normal, 2: Improved, 3: High
I32 writeVerifyModeFlags	1.3.6.1.4.1.1714.1.1.3.5	Integer32	read-only	Write-verify mode flags BIT 0 : Write-Verify on Normal Writes (RW) 0: Disabled, 1: Enabled. BIT 1 : Write-Verify on Initialization Writes (RW) 0: Disabled, 1: Enabled. BIT 2 : Write-Verify on Rebuild Writes (RW) 0: Disabled, 1: Enabled. BIT 3 -- BIT 7 : Reserved (Set to 0).
hostSideParams	1.3.6.1.4.1.1714.1.1.4
I32 maxQueuedIOCnt	1.3.6.1.4.1.1714.1.1.4.1	Integer32	read-only	Maximum supported host queued I/O count == N (> 0) ==> Count = 2 ** ( N - 1 ).
I32 minQueuedIOCnt	1.3.6.1.4.1.1714.1.1.4.2	Integer32	read-only	Minimum supported host queued I/O count == N (> 0) ==> Count = 2 ** ( N - 1 ).
I32 defQueuedIOCnt	1.3.6.1.4.1.1714.1.1.4.3	Integer32	read-only	Default host queued I/O count == N (> 0) ==> Count = 2 ** ( N - 1 ).
I32 curQueuedIOCnt	1.3.6.1.4.1.1714.1.1.4.4	Integer32	read-only	Current host queued I/O count == 0 - Automatically Computed. == N (> 0) ==> Count = 2 ** ( N - 1 ).
I32 maxLunNum	1.3.6.1.4.1.1714.1.1.4.5	Integer32	read-only	Maximum LUNs per host SCSI ID(SCSI-to-SCSI only) == N ==> LUNs = 2 ** ( N - 1 )
I32 minLunNum	1.3.6.1.4.1.1714.1.1.4.6	Integer32	read-only	Minimum LUNs per host SCSI ID(SCSI-to-SCSI only) == N ==> LUNs = 2 ** ( N - 1 )
I32 defLunNum	1.3.6.1.4.1.1714.1.1.4.7	Integer32	read-only	Default LUNs per host SCSI ID(SCSI-to-SCSI only) == N ==> LUNs = 2 ** ( N - 1 )
I32 curLunNum	1.3.6.1.4.1.1714.1.1.4.8	Integer32	read-only	Current LUNs per host SCSI ID(SCSI-to-SCSI only) == N ==> LUNs = 2 ** ( N - 1 )
driveSideParams	1.3.6.1.4.1.1714.1.1.5
I32 modeFlags	1.3.6.1.4.1.1714.1.1.5.1	Integer32	read-only	mode flags of drive-side interface parameters BIT 0 : Motor Spin Up (RW) 0: Disabled, 1: Enabled. BIT 1 : Power Up SCSI Reset (RW) 0: Disabled, 1: Enabled. BIT 2 -- BIT 15 : Reserved (Set to 0) BITS 16-17: Drive Failure Prediction (SMART) Mode: == 0 - Disabled. == 1 - Detect only. == 2 - Clone drive and keep drive cloned. == 3 - Clone drive and replace when cloning complete. BIT 18 : Auto Assign Global Spare Drive (RW) 0: Disabled, 1: Enabled. BIT 19 -- BIT 31 : Reserved (Set to 0)
I32 maxAccessDelayTime	1.3.6.1.4.1.1714.1.1.5.2	Integer32	read-only	Maximum time to delay prior to first disk access(in 5 seconds unit) == N ==> Delay = N * 5 seconds.
I32 minAccessDelayTime	1.3.6.1.4.1.1714.1.1.5.3	Integer32	read-only	Minimum time to delay prior to first disk access(in 5 seconds unit) == N ==> Delay = N * 5 seconds.
I32 defAccessDelayTime	1.3.6.1.4.1.1714.1.1.5.4	Integer32	read-only	Default time to delay prior to first disk access(in 5 seconds unit) == N ==> Delay = N * 5 seconds.
I32 curAccessDelayTime	1.3.6.1.4.1.1714.1.1.5.5	Integer32	read-only	Current time to delay prior to first disk access(in 5 seconds unit) == 0 ==> No Delay. == N ==> Delay = N * 5 seconds.
I32 maxTagCnt	1.3.6.1.4.1.1714.1.1.5.6	Integer32	read-only	Maximum drive-side SCSI tags per drive(Tags = 2**(N-1))
I32 minTagCnt	1.3.6.1.4.1.1714.1.1.5.7	Integer32	read-only	Minimum drive-side SCSI tags per drive(Tags = 2**(N-1))
I32 defTagCnt	1.3.6.1.4.1.1714.1.1.5.8	Integer32	read-only	Default drive-side SCSI tags per drive(Tags = 2**(N-1))
I32 curTagCnt	1.3.6.1.4.1.1714.1.1.5.9	Integer32	read-only	Current drive-side SCSI tags per drive(Tags = 2**(N-1), 0: Disabled)
I32 defIOTimeout	1.3.6.1.4.1.1714.1.1.5.10	Integer32	read-only	Default drive-side SCSI I/O timeout(in 10ms units)
I32 curIOTimeout	1.3.6.1.4.1.1714.1.1.5.11	Integer32	read-only	Current drive-side SCSI I/O timeout(in 10ms units)
I32 defDrvChkPeriod	1.3.6.1.4.1.1714.1.1.5.12	Integer32	read-only	Default drive-side SCSI drive check period(10ms units)
I32 curDrvChkPeriod	1.3.6.1.4.1.1714.1.1.5.13	Integer32	read-only	Current drive-side SCSI drive check period(10ms units)
I32 defSaftePollingPeriod	1.3.6.1.4.1.1714.1.1.5.14	Integer32	read-only	Default SAFTE polling period(10ms units)
I32 curSaftePollingPeriod	1.3.6.1.4.1.1714.1.1.5.15	Integer32	read-only	Current SAFTE polling period(10ms units)
I32 defAutoDetectPeriod	1.3.6.1.4.1.1714.1.1.5.16	Integer32	read-only	Default auto-detect failed drive swaped check period(10ms units)
I32 curAutoDetectPeriod	1.3.6.1.4.1.1714.1.1.5.17	Integer32	read-only	Current auto-detect failed drive swaped check period(10ms units)
redundantParams	1.3.6.1.4.1.1714.1.1.6
I32 redCtlrCfg	1.3.6.1.4.1.1714.1.1.6.1	Integer32	read-only	Redundant controller configuration For Reading: BITS 0 -- 1: == 0xff - RC Functionality Not Supported. == 0 - RC Functionality Disabled. == 1 - RC Functionality Enabled as Primary. == 2 - RC Functionality Enabled as Secondary. == 3 - RC Functionality Enabled in Autoconfigure Mode. BITS 2 -- 6 : Reserved. BIT 7 : State of Controller Location Signal Support: 0: Not supported, 1: Supported. For Writing: == 0 - Disable Redundant Controller Functionality. == 1 - Enable RC Functionality and set role to Primary. == 2 - Enable RC Functionality and set role to Primary. == 3 - Enable RC Functionality and automatically select role. == 0x81 - Deassert Reset (WO). == 0xc1 - Simulate Primary Controller Failure (WO). == 0xc2 - Simulate Secondary Controller Failure (WO). == 0xc3 - Force secondary controller to kill primary controller Failure (WO). == 0xc4 - Force primary controller to kill secondary controller Failure (WO).
I32 redCtlrModeFlags	1.3.6.1.4.1.1714.1.1.6.2	Integer32	read-only	Redundant controller mode flags BIT 0 : Cache Synchronization (RW) 0 : Cache NOT Synchronized, 1 : Cache Synchronized BIT 1 : Host Channel Failover Mode (RW) 0 : Shared host bus, 1 : Independent host bus BIT 2 : Local/Remote Redundant Mode (RW) 0 : Local Redundant, 1 : Remote Redundant BITS 2-14 : Reserved. BIT 15 : Secondary RS-232 Port Status (RW) 0 : Port Disabled, 1 : Port Enabled
I32 redCtlrCommType	1.3.6.1.4.1.1714.1.1.6.3	Integer32	read-only	Redundant controller communication channel type == 0 - RS-232 == 1 - SCSI/Fibre Channel
I32 redCtlrStatus	1.3.6.1.4.1.1714.1.1.6.4	Integer32	read-only	Redundant controller status BIT 0 -- BIT 5 : Current Status == 0 - Inactive. == 1 - Scanning. == 0x11 - Detected. == 0x12 - Enabled. == 0x3f - Controller Failed. BIT 6 : Original Controller Role (prior to first controller failure): 0: Primary, 1: Secondary. BIT 7 : Current Controller Role 0: Primary, 1: Secondary.
ldTable	1.3.6.1.4.1.1714.1.2		not-accessible	Logical drive table
ldEntry	1.3.6.1.4.1.1714.1.2.1		not-accessible	Logical drive entry
I32 ldIndex	1.3.6.1.4.1.1714.1.2.1.1	Integer32	not-accessible	Logical drive index
I32 ldID	1.3.6.1.4.1.1714.1.2.1.2	Integer32	read-only	Logical drive identifier
I32 ldSize	1.3.6.1.4.1.1714.1.2.1.3	Integer32	read-only	Logical drive size, in Blocks
I32 ldBlkSizeIdx	1.3.6.1.4.1.1714.1.2.1.4	Integer32	read-only	Block Size = (Block Size Index) Power of 2
I32 ldOpModes	1.3.6.1.4.1.1714.1.2.1.5	Integer32	read-write	Logical drive operating modes BITS 0-3 : RAID Level (RO): 0 : Single Drive 1 : NON-RAID 2 : RAID 0 3 : RAID 1 4 : RAID 3 5 : RAID 4 6 : RAID 5 0xf: NOT DEFINED BITS 4-6 : Reserved (Set to 0). BIT 7 : Logical Drive Assignment (R/W): If CLEAR, Logical Drive is assigned to Primary Controller. If SET, Logical Drive is assigned to Secondary Controller.
I32 ldStatus	1.3.6.1.4.1.1714.1.2.1.6	Integer32	read-only	Logical drive status BITS 0-2 : Status Code (RO): 0 : Good 1 : Rebuilding 2 : Initializing 3 : Degraded 4 : Dead 5 : Invalid 6 : Incomplete 7 : Drive Missing BITS 3-6 : Reserved. BITS 7 : Logical Drive Off-line (RW).
I32 ldState	1.3.6.1.4.1.1714.1.2.1.7	Integer32	read-only	Logical drive state BIT 0 : If SET, in process of rebuilding (degraded mode) or checking/updating Logical Drive Parity (LD is 'good'). BIT 1 : If SET, in process of expanding Logical Drive. BIT 2 : If SET, in process of adding SCSI drives to Logical Drive. BIT 3-5: Reserved. BIT 6 : If SET, add SCSI drives operation is paused. BIT 7 : Reserved.
I32 ldTotalDrvCnt	1.3.6.1.4.1.1714.1.2.1.8	Integer32	read-only	Total hard drive count on logical drive
I32 ldOnlineDrvCnt	1.3.6.1.4.1.1714.1.2.1.9	Integer32	read-only	On-Line hard drvie count on logical drive
I32 ldSpareDrvCnt	1.3.6.1.4.1.1714.1.2.1.10	Integer32	read-only	Spare hard drive count on logical drive
I32 ldFailedDrvCnt	1.3.6.1.4.1.1714.1.2.1.11	Integer32	read-only	Failed hard drive count on logical drive
lvTable	1.3.6.1.4.1.1714.1.3		not-accessible	Logical volume table
lvEntry	1.3.6.1.4.1.1714.1.3.1		not-accessible	Logical volume entry
I32 lvIndex	1.3.6.1.4.1.1714.1.3.1.1	Integer32	not-accessible	Logical volume index
I32 lvID	1.3.6.1.4.1.1714.1.3.1.2	Integer32	read-only	Logical volume identifier
I32 lvSize	1.3.6.1.4.1.1714.1.3.1.3	Integer32	read-only	Logical volume size, in Blocks
I32 lvBlkSizeIdx	1.3.6.1.4.1.1714.1.3.1.4	Integer32	read-only	Block Size = (Block Size Index) Power of 2
I32 lvOpModes	1.3.6.1.4.1.1714.1.3.1.5	Integer32	read-write	Logical volume operating modes BITS 0-6 : Reserved (Set to 0). BIT 7 : Logical Volume Assignment (R/W): If CLEAR, Logical Volume is assigned to Primary Controller. If SET, Logical Volume is assigned to Secondary Controller.
I32 lvLdCount	1.3.6.1.4.1.1714.1.3.1.6	Integer32	read-only	Logical drive counts in this logical volume
OCT lvLdList	1.3.6.1.4.1.1714.1.3.1.7	OCTET STRING	read-only	Logical drive identifiers list in this logical volume
partTable	1.3.6.1.4.1.1714.1.4		not-accessible	Partition table
partEntry	1.3.6.1.4.1.1714.1.4.1		not-accessible	Partition entry
I32 partIndex	1.3.6.1.4.1.1714.1.4.1.1	Integer32	not-accessible	Partition index
I32 partLdLvID	1.3.6.1.4.1.1714.1.4.1.2	Integer32	read-only	Logical drive/Logical volume identifier
I32 partOffset	1.3.6.1.4.1.1714.1.4.1.3	Integer32	read-only	Partition base offset
I32 partSize	1.3.6.1.4.1.1714.1.4.1.4	Integer32	read-only	Partition size, in Blocks
lunTable	1.3.6.1.4.1.1714.1.5		not-accessible	LUN table
lunEntry	1.3.6.1.4.1.1714.1.5.1		not-accessible	LUN entry
I32 lunIndex	1.3.6.1.4.1.1714.1.5.1.1	Integer32	not-accessible	LUN index
I32 lunChl	1.3.6.1.4.1.1714.1.5.1.2	Integer32	read-only	Logical host channel number
I32 lunID	1.3.6.1.4.1.1714.1.5.1.3	Integer32	read-only	Host-side SCSI ID
I32 lunNum	1.3.6.1.4.1.1714.1.5.1.4	Integer32	read-only	Host-side SCSI LUN
I32 lunLdLvID	1.3.6.1.4.1.1714.1.5.1.5	Integer32	read-only	Logical drive/Logical volume identifier
I32 lunPartIdx	1.3.6.1.4.1.1714.1.5.1.6	Integer32	read-only	Partition index of logical drive or logical volume
hddTable	1.3.6.1.4.1.1714.1.6		not-accessible	Hard disk drive table
hddEntry	1.3.6.1.4.1.1714.1.6.1		not-accessible	Hard disk drive entry
I32 hddIndex	1.3.6.1.4.1.1714.1.6.1.1	Integer32	not-accessible	Hard disk drive index
I32 hddLogChlNum	1.3.6.1.4.1.1714.1.6.1.2	Integer32	read-only	Logical channel number to which hard disk drive is connected
I32 hddPhyChlNum	1.3.6.1.4.1.1714.1.6.1.3	Integer32	read-only	Physical channel number to which hard disk drive is connected
I32 hddScsiId	1.3.6.1.4.1.1714.1.6.1.4	Integer32	read-only	SCSI ID of hard disk drive
I32 hddScsiLun	1.3.6.1.4.1.1714.1.6.1.5	Integer32	read-only	SCSI Lun of hard disk drive
I32 hddLdId	1.3.6.1.4.1.1714.1.6.1.6	Integer32	read-only	Logical drive ID to which hard disk drive is belonged 0 : If Drive Status == Spare Drive, then drive is Global Spare. Otherwise, indicates drive does not currently belong to any logical drive.
I32 hddSize	1.3.6.1.4.1.1714.1.6.1.7	Integer32	read-only	Hard disk drive size, in Blocks
I32 hddBlkSizeIdx	1.3.6.1.4.1.1714.1.6.1.8	Integer32	read-only	Block Size = (Block Size Index) Power of 2
I32 hddSpeed	1.3.6.1.4.1.1714.1.6.1.9	Integer32	read-only	Hard disk drive data transfer speed, in ns
I32 hddDataWidth	1.3.6.1.4.1.1714.1.6.1.10	Integer32	read-only	Hard disk drive data transfer width 0: Narrow 1: Wide
I32 hddStatus	1.3.6.1.4.1.1714.1.6.1.11	Integer32	read-only	Hard disk drive status 0 : New Drive 1 : On-Line Drive 2 : Used Drive 3 : Spare Drive 4 : Drive Initialization in Progress 5 : Drive Rebuild in Progress 6 : Add Drive to Logical Drive in Progress 9 : Global Spare Drive 0x11 : Drive is in process of Cloning another Drive 0x12 : Drive is a valid Clone of another Drive 0x13 : Drive is in process of Copying from another Drive (for Copy/Replace LD Expansion function) 0x3f : Drive Absent 0x8x: SCSI Device (Type x) 0xfc : Missing Global Spare Drive 0xfd : Missing Spare Drive 0xfe : Missing Drive 0xff : Failed Drive
I32 hddState	1.3.6.1.4.1.1714.1.6.1.12	Integer32	read-only	Hard disk drive state BITS 0 -- 6: Reserved. BIT 7: Drive off-line (RW).
I32 hddSlotNum	1.3.6.1.4.1.1714.1.6.1.13	Integer32	read-only	Hard disk drive slot number, 0: N/A
I32 hddResvSpace	1.3.6.1.4.1.1714.1.6.1.14	Integer32	read-only	Hard disk drive reserved space Drive Reserved Space Size (64KB units). When set, the index into the 'Valid Value List' should be passed in rather than the size itself. This will trigger a format or unformat operation (depending on the direction of the change) is performed on the drive reserved space. Note that it is an error to try and change a the size of the reserved space without unformatting first or to try and unformat a drive that has been configured as a LD member or as a spare/clone.
OCT hddModelStr	1.3.6.1.4.1.1714.1.6.1.15	OCTET STRING	read-only	Hard disk drive model string
OCT hddFwRevStr	1.3.6.1.4.1.1714.1.6.1.16	OCTET STRING	read-only	Hard disk drive firmware revision string
OCT hddSerialNum	1.3.6.1.4.1.1714.1.6.1.17	OCTET STRING	read-only	Hard disk drive serial number
chlTable	1.3.6.1.4.1.1714.1.7		not-accessible	SCSI/Fibre channel table
chlEntry	1.3.6.1.4.1.1714.1.7.1		not-accessible	SCSI/Fibre channel entry
I32 chlIndex	1.3.6.1.4.1.1714.1.7.1.1	Integer32	not-accessible	SCSI/Fibre channel index
I32 chlLogChlNum	1.3.6.1.4.1.1714.1.7.1.2	Integer32	read-only	Logical channel number
I32 chlPhyChlNum	1.3.6.1.4.1.1714.1.7.1.3	Integer32	read-only	Physical channel number
I32 chlType	1.3.6.1.4.1.1714.1.7.1.4	Integer32	read-only	Channel type 0 : SCSI 1 : PCI 2 : FIBRE 3 : Parallel-IDE 4 : SATA 0x11 : Network-IO - LAN 0x40 : Fixed Redundant Communication Channel Others : not defined
I32 chlChipType	1.3.6.1.4.1.1714.1.7.1.5	Integer32	read-only	Channel interface chip type
I32 chlMaxSupId	1.3.6.1.4.1.1714.1.7.1.6	Integer32	read-only	Max supported SCSI id
I32 chlMaxSupLun	1.3.6.1.4.1.1714.1.7.1.7	Integer32	read-only	Max supported SCSI lun per id
I32 chlMode	1.3.6.1.4.1.1714.1.7.1.8	Integer32	read-only	Channel mode flags BIT 0 : Channel Mode (RW) 0: Drive Mode, 1: Host Mode (or dedicated RCC). BIT 1 : Channel SCSI Termination (SCSI Only) (RW) 0: Disabled, 1: Enabled. BIT 2 : SCSI Parity (SCSI Only) (RW) 0: Disabled, 1: Enabled. BIT 3 : Support LUN > 0 (RW) 0: Disabled, 1: Enabled. BIT 8 : Supports Redundant Channel Communication (RO) 0: Does NOT support, 1: Does support. BIT 9 : Redundant Controller Communication Enable (RW) Note that if RCC is enabled on host-mode channels, then the channel is a dedicated RCC channel. If it is enabled on drive-mode channels, then RCC transactions are multiplexed with standard drive-side IOs on the channel. 0: Disabled, 1: Enabled. BIT 12 : 'Shelf' Status Input (SCSI Only) (RW) 0: Disabled, 1: Enabled. BIT 13 : 'Swap' Status Input (SCSI Only) (RW) 0: Disabled, 1: Enabled. BIT 14 : 'Drive Failure' Status Output (SCSI Only) (RW) 0: Disabled, 1: Enabled. BIT 15 : Reserved.
I32 chlScsiIdBitmap	1.3.6.1.4.1.1714.1.7.1.9	Integer32	read-only	SCSI host/drive channel id bitmap BITS 0-15 : Primary Controller SCSI ID Bitmap BITS 16-31 : Secondary Controller SCSI ID Bitmap
I32 chlFibreIdBase	1.3.6.1.4.1.1714.1.7.1.10	Integer32	read-only	Fibre host channel id base in units of 0x10. Note that this is ignored for SCSI channels
I32 chlHostIdBitmap	1.3.6.1.4.1.1714.1.7.1.11	Integer32	read-only	SCSI/Fibre host channel id bitmap BITS 0-15 : Primary Controller SCSI ID Bitmap BITS 16-31 : Secondary Controller SCSI ID Bitmap
I32 chlDrvPid	1.3.6.1.4.1.1714.1.7.1.12	Integer32	read-only	Primary controller SCSI/Fibre drive channel id Note: For Fibre Drive Channels, if == 0x7f then ID will be negotiated.
I32 chlDrvSid	1.3.6.1.4.1.1714.1.7.1.13	Integer32	read-only	Secondary controller SCSI/Fibre drive channel id Note: For Fibre Drive Channels, if == 0x7f then ID will be negotiated. If == 0xff, then Fibre loop not initialized.
I32 chlMaxTxPeriod	1.3.6.1.4.1.1714.1.7.1.14	Integer32	read-only	Maximum synchronized transfer period (SCSI: 4 ns units, 0 : Async; Fibre: 1/32 ns units)
I32 chlMinTxPeriod	1.3.6.1.4.1.1714.1.7.1.15	Integer32	read-only	Minimum synchronized transfer period (SCSI: 4 ns units, 0 : Async; Fibre: 1/32 ns units)
I32 chlDefTxPeriod	1.3.6.1.4.1.1714.1.7.1.16	Integer32	read-only	Default synchronized transfer period (SCSI: 4 ns units, 0 : Async; Fibre: 1/32 ns units, 0 - Auto-negotiate)
I32 chlCurTxPeriod	1.3.6.1.4.1.1714.1.7.1.17	Integer32	read-only	Current synchronized transfer period (SCSI: 4 ns units, 0 : Async; Fibre: 1/32 ns units)
I32 chlMaxTxWidth	1.3.6.1.4.1.1714.1.7.1.18	Integer32	read-only	Maximum synchronized transfer width index(SCSI only) (Index - 0:Narrow, 1:Wide)
I32 chlMinTxWidth	1.3.6.1.4.1.1714.1.7.1.19	Integer32	read-only	Minimum synchronized transfer width index(SCSI only) (Index - 0:Narrow, 1:Wide)
I32 chlDefTxWidth	1.3.6.1.4.1.1714.1.7.1.20	Integer32	read-only	Default synchronized transfer width index(SCSI only) (Index - 0:Narrow, 1:Wide)
I32 chlCurTxWidth	1.3.6.1.4.1.1714.1.7.1.21	Integer32	read-only	Current synchronized transfer width index(SCSI only) (Index - 0:Narrow, 1:Wide)
I32 chlMaxTagCnt	1.3.6.1.4.1.1714.1.7.1.22	Integer32	read-only	Maximum tag count
I32 chlDefTagCnt	1.3.6.1.4.1.1714.1.7.1.23	Integer32	read-only	Default tag count
luTable	1.3.6.1.4.1.1714.1.8		not-accessible	Logical unit table
luEntry	1.3.6.1.4.1.1714.1.8.1		not-accessible	Logical unit entry
I32 luIndex	1.3.6.1.4.1.1714.1.8.1.1	Integer32	not-accessible	Logical unit index
I32 luDescriptor	1.3.6.1.4.1.1714.1.8.1.2	Integer32	read-only	Logical unit descriptor
I32 luClassCode	1.3.6.1.4.1.1714.1.8.1.3	Integer32	read-only	Logical unit class code 1 - Enclosure Unit: Manages Power supplies, fans, temperature, UPS', and drive slot states. 2 - 0xfff: Reserved. 0x1000 - 0xffff: Vendor specific.
I32 luTypeCode	1.3.6.1.4.1.1714.1.8.1.4	Integer32	read-only	Logical unit type code 1 - SAF-TE Management Device. 2 - Controller Peripheral Device. 3 - Customable I2C Peripheral Device. 4 - SES Management Device. 5 - 0xfff: Reserved. 0x1000 - 0xffff: Vendor specific.
OCT luVendorID	1.3.6.1.4.1.1714.1.8.1.5	OCTET STRING	read-only	Logical unit vendor ID string
OCT luIDString	1.3.6.1.4.1.1714.1.8.1.6	OCTET STRING	read-only	Logical unit ID string
OCT luHWRev	1.3.6.1.4.1.1714.1.8.1.7	OCTET STRING	read-only	Logical unit hardware revision string
OCT luSWRev	1.3.6.1.4.1.1714.1.8.1.8	OCTET STRING	read-only	Logical unit software revision string
I32 luChlNum	1.3.6.1.4.1.1714.1.8.1.9	Integer32	read-only	Channel number to which logical unit is connected
I32 luIDNum	1.3.6.1.4.1.1714.1.8.1.10	Integer32	read-only	ID number for logical unit
luDevTable	1.3.6.1.4.1.1714.1.9		not-accessible	Logical unit device table
luDevEntry	1.3.6.1.4.1.1714.1.9.1		not-accessible	Logical unit device entry
I32 luDevTabIdx	1.3.6.1.4.1.1714.1.9.1.1	Integer32	not-accessible	Logical unit device table index
I32 luDevEntryLuDescriptor	1.3.6.1.4.1.1714.1.9.1.2	Integer32	read-only	Logical unit descriptor
I32 luDevEntryLuClassCode	1.3.6.1.4.1.1714.1.9.1.3	Integer32	read-only	Logical unit class code 1 - Enclosure Unit: Manages Power supplies, fans, temperature, UPS', and drive slot states. 2 - 0xfff: Reserved. 0x1000 - 0xffff: Vendor specific.
I32 luDevEntryLuTypeCode	1.3.6.1.4.1.1714.1.9.1.4	Integer32	read-only	Logical unit type code 1 - SAF-TE Management Device. 2 - Controller Peripheral Device. 3 - Customable I2C Peripheral Device. 4 - SES Management Device. 5 - 0xfff: Reserved. 0x1000 - 0xffff: Vendor specific.
I32 luDevDescriptor	1.3.6.1.4.1.1714.1.9.1.5	Integer32	read-only	Logical unit device descriptor
I32 luDevTypeCode	1.3.6.1.4.1.1714.1.9.1.6	Integer32	read-only	Logical unit device type code Enclosure Unit Device Types: 1 - Power supply. 2 - Fan. 3 - Temperature sensor. 4 - UPS. 5 - Voltage sensors. 6 - Current sensors. 8 - Temperature Out-of-Range Flags. 9 - Door. 0xa - Speaker. 0xb - Battery-backup battery. 0x11 - Slot states.
I32 luDevIndex	1.3.6.1.4.1.1714.1.9.1.7	Integer32	read-only	Logical unit device index Can be used to identify device position. If == 0, Index Not Available. For SAF-TE Logical Units, this index corresponds to one greater than the index of the device as presented in the 'Read Enclosure Status' data.
OCT luDevDescription	1.3.6.1.4.1.1714.1.9.1.8	OCTET STRING	read-only	Logical unit device description string
I32 luDevValue	1.3.6.1.4.1.1714.1.9.1.9	Integer32	read-only	Logical unit device value
I32 luDevValueUnit	1.3.6.1.4.1.1714.1.9.1.10	Integer32	read-only	Logical unit device value unit Fan: in RPM Voltage Sensor: in Millivolt Current Sensor: in Milliamps Temperature Sensor: in 1/1000 Degreeds C(Absolut value)
I32 luDevChlNum	1.3.6.1.4.1.1714.1.9.1.11	Integer32	read-only	Logical unit device(device slot) channel number
I32 luDevIDNum	1.3.6.1.4.1.1714.1.9.1.12	Integer32	read-only	Logical unit device(device slot) id number
I32 luDevStatus	1.3.6.1.4.1.1714.1.9.1.13	Integer32	read-only	Logical unit device status flags Power Supply: BIT 0 - CLEAR: Power supply functioning normally. SET: Power supply malfunctioning. BITS 1-5 - Reserved (Set to 0). BIT 6 - CLEAR: Power supply is ON. SET: Power supply is OFF. BIT 7 - CLEAR: Power supply IS present. SET: Power supply is NOT present. == 0xff - Status unknown. Fan: BIT 0 - CLEAR: Fan functioning normally. SET: Fan malfunctioning. BITS 1-5 - Reserved (Set to 0). BIT 6 - CLEAR: Fan is ON. SET: Fan is OFF. BIT 7 - CLEAR: Fan IS present. SET: Fan is NOT present. == 0xff - Status unknown. Temperature Sensor: BIT 0 - CLEAR: Temp. sensor functioning normally. SET: Temp. sensor malfunctioning. BIT 1 - 3: If == 0, Temp. within safe range. If == 2, Cold Temp. Warning. If == 3, Hot Temp. Warning. If == 4, Cold Temp. Limit Exceeded. If == 5, Hot Temp. Limit Exceeded. BIT 6 - CLEAR: Temp. Sensor is Activated. SET: Temp. Sensor is NOT Activated. BIT 7 - CLEAR: Temperature sensor IS present. SET: Temperature sensor is NOT present. == 0xff - Status unknown. UPS: BIT 0 - CLEAR: Unit functioning normally. SET: Unit malfunctioning. BIT 1 - CLEAR: AC Power present. SET: AC Power NOT present. BIT 2 - 3: If == 0, battery fully charged. If == 1, battery not fully charged. If == 2, battery charge critically low. If == 3, battery completely drained. BITS 4-5 - Reserved (Set to 0). BIT 6 - CLEAR: UPS is ON. SET: UPS is OFF. BIT 7 - CLEAR: UPS IS present. SET: UPS is NOT present. == 0xff - Status unknown. Battery: BIT 0 - CLEAR: Battery functioning normally. SET: Battery malfunctioning. BIT 1 - CLEAR: Battery charging OFF (or trickle). SET: Battery charging ON. BIT 2 - 3: If == 0, battery fully charged. If == 1, battery not fully charged. If == 2, battery charge critically low. If == 3, battery completely drained. BITS 4-5 - Reserved (Set to 0). BIT 6 - CLEAR: Battery-backup is enabled. SET: Battery-backup is disabled. BIT 7 - CLEAR: Battery IS present. SET: Battery is NOT present. == 0xff - Status unknown. Voltage Sensor: BIT 0 - CLEAR: Voltage sensor functioning normally. SET: Voltage sensor malfunctioning. BIT 1 - 3: Current Voltage Sensor State: If == 0, Voltage within acceptable range. If == 2, Low Voltage Warning. If == 3, High Voltage Warning. If == 4, Low Voltage Limit Exceeded. If == 5, High Voltage Limit Exceeded. BIT 4 - 5: Reserved. BIT 6 - CLEAR: Voltage Sensor is Activated. SET: Voltage Sensor is NOT Activated. BIT 7 - CLEAR: Voltage sensor IS present. SET: Voltage sensor is NOT present. == 0xff - Voltage Sensor Status unknown. Current Sensor: BIT 0 - CLEAR: Current sensor functioning normally. SET: Current sensor malfunctioning. BIT 1 - 3: Current Current Sensor State: If == 0, Current within acceptable range. If == 3, Over Current Warning. If == 5, Over Current Limit Exceeded. BIT 4 - 5: Reserved. BIT 6 - CLEAR: Current Sensor is Activated. SET: Current Sensor is NOT Activated. BIT 7 - CLEAR: Current sensor IS present. SET: Current sensor is NOT present. == 0xff - Current Sensor Status unknown. Door: BIT 0 - CLEAR: Door OK. SET: Door, door lock, or door sensor malfunctioning. BIT 1 - CLEAR: Door is shut. SET: Door is open. BITS 2-5 - Reserved (Set to 0). BIT 6 - CLEAR: Door lock engaged. SET: Door lock NOT engaged. BIT 7 - CLEAR: Door IS present. SET: Door is NOT present. == 0xff - Status unknown. Speaker: BIT 0 - CLEAR: Speaker functioning normally. SET: Speaker malfunctioning. BITS 1-5 - Reserved (Set to 0). BIT 6 - CLEAR: Speaker is ON. SET: Speaker is OFF. BIT 7 - CLEAR: Speaker IS present. SET: Speaker is NOT present. == 0xff - Status unknown. Slot: BIT 0 - CLEAR: Slot sense circuitry functioning normally. SET: Slot sense circuitry malfunctioning. BIT 1 - CLEAR: Device in slot has not been marked 'needing replacement' or a replacement drive has been inserted. SET: Device in slot has been marked BAD and is awaiting replacement. BIT 2 - CLEAR: Slot is activated so that drive can be accessed. SET: Slot NOT activated. BITS 3-5 - Reserved (Set to 0). BIT 6 - CLEAR: Slot is NOT ready for insertion/removal. SET: Slot is ready for insertion/removal. BIT 7 - CLEAR: Device inserted in slot. SET: Slot is empty. == 0xff - Status unknown.
extLunTable	1.3.6.1.4.1.1714.1.10		not-accessible	Extended LUN table
extLunEntry	1.3.6.1.4.1.1714.1.10.1		not-accessible	Extended LUN entry
I32 extLunIndex	1.3.6.1.4.1.1714.1.10.1.1	Integer32	not-accessible	Extended LUN index
OCT extLunGroupName	1.3.6.1.4.1.1714.1.10.1.2	OCTET STRING	read-only	Name of this extended LUN definition
OCT extLunHostIDWWN	1.3.6.1.4.1.1714.1.10.1.3	OCTET STRING	read-only	Host-ID/WWN of this exteded LUN definition
OCT extLunHostIDMask	1.3.6.1.4.1.1714.1.10.1.4	OCTET STRING	read-only	Host-ID/WWN mask of this extended LUN definition
OCT extLunFilterType	1.3.6.1.4.1.1714.1.10.1.5	OCTET STRING	read-only	Filtering type of this extended LUN definition
OCT extLunAccessMode	1.3.6.1.4.1.1714.1.10.1.6	OCTET STRING	read-only	Access mode of this extended LUN definition
I32 extLunChl	1.3.6.1.4.1.1714.1.10.1.7	Integer32	read-only	Logical host channel number
I32 extLunID	1.3.6.1.4.1.1714.1.10.1.8	Integer32	read-only	Host-side SCSI ID
I32 extLunNum	1.3.6.1.4.1.1714.1.10.1.9	Integer32	read-only	Host-side SCSI LUN
I32 extLunLdLvID	1.3.6.1.4.1.1714.1.10.1.10	Integer32	read-only	Logical drive/Logical volume identifier
I32 extLunPartIdx	1.3.6.1.4.1.1714.1.10.1.11	Integer32	read-only	Partition index of logical drive or logical volume
eventLog	1.3.6.1.4.1.1714.1.11
allEvtTable	1.3.6.1.4.1.1714.1.11.1		not-accessible	All event table
allEvtEntry	1.3.6.1.4.1.1714.1.11.1.1		not-accessible	All event entry
I32 evtTableIdx	1.3.6.1.4.1.1714.1.11.1.1.1	Integer32	not-accessible	Event table index
OCT evtSource	1.3.6.1.4.1.1714.1.11.1.1.2	OCTET STRING	read-only	Event source
OCT evtSeverity	1.3.6.1.4.1.1714.1.11.1.1.3	OCTET STRING	read-only	Event severity
I32 evtIndex	1.3.6.1.4.1.1714.1.11.1.1.4	Integer32	read-only	Event index
OCT evtType	1.3.6.1.4.1.1714.1.11.1.1.5	OCTET STRING	read-only	Event type
OCT evtCode	1.3.6.1.4.1.1714.1.11.1.1.6	OCTET STRING	read-only	Event code
ctlrEvtTable	1.3.6.1.4.1.1714.1.11.2		not-accessible	Controller event table
ctlrEvtEntry	1.3.6.1.4.1.1714.1.11.2.1		not-accessible	Controller event entry
I32 ctlrEvtEntryEvtTableIdx	1.3.6.1.4.1.1714.1.11.2.1.1	Integer32	not-accessible	Event table index
OCT ctlrEvtEntryEvtSource	1.3.6.1.4.1.1714.1.11.2.1.2	OCTET STRING	read-only	Event source
OCT ctlrEvtEntryEvtSeverity	1.3.6.1.4.1.1714.1.11.2.1.3	OCTET STRING	read-only	Event severity
I32 ctlrEvtEntryEvtIndex	1.3.6.1.4.1.1714.1.11.2.1.4	Integer32	read-only	Event index
OCT ctlrEvtEntryEvtType	1.3.6.1.4.1.1714.1.11.2.1.5	OCTET STRING	read-only	Event type
OCT ctlrEvtEntryEvtCode	1.3.6.1.4.1.1714.1.11.2.1.6	OCTET STRING	read-only	Event code
drvEvtTable	1.3.6.1.4.1.1714.1.11.3		not-accessible	Drive interface event table
drvEvtEntry	1.3.6.1.4.1.1714.1.11.3.1		not-accessible	Drive event entry
I32 drvEvtEntryEvtTableIdx	1.3.6.1.4.1.1714.1.11.3.1.1	Integer32	not-accessible	Event table index
OCT drvEvtEntryEvtSource	1.3.6.1.4.1.1714.1.11.3.1.2	OCTET STRING	read-only	Event source
OCT drvEvtEntryEvtSeverity	1.3.6.1.4.1.1714.1.11.3.1.3	OCTET STRING	read-only	Event severity
I32 drvEvtEntryEvtIndex	1.3.6.1.4.1.1714.1.11.3.1.4	Integer32	read-only	Event index
OCT drvEvtEntryEvtType	1.3.6.1.4.1.1714.1.11.3.1.5	OCTET STRING	read-only	Event type
OCT drvEvtEntryEvtCode	1.3.6.1.4.1.1714.1.11.3.1.6	OCTET STRING	read-only	Event code
I32 evtLdID	1.3.6.1.4.1.1714.1.11.3.1.7	Integer32	read-only	Logical drive ID
I32 evtLogChl	1.3.6.1.4.1.1714.1.11.3.1.8	Integer32	read-only	Logical channel number
I32 evtID	1.3.6.1.4.1.1714.1.11.3.1.9	Integer32	read-only	Node SCSI ID
I32 evtLun	1.3.6.1.4.1.1714.1.11.3.1.10	Integer32	read-only	SCSI LUN
hostEvtTable	1.3.6.1.4.1.1714.1.11.4		not-accessible	Host interface event table
hostEvtEntry	1.3.6.1.4.1.1714.1.11.4.1		not-accessible	Host interface event entry
I32 hostEvtEntryEvtTableIdx	1.3.6.1.4.1.1714.1.11.4.1.1	Integer32	not-accessible	Event table index
OCT hostEvtEntryEvtSource	1.3.6.1.4.1.1714.1.11.4.1.2	OCTET STRING	read-only	Event source
OCT hostEvtEntryEvtSeverity	1.3.6.1.4.1.1714.1.11.4.1.3	OCTET STRING	read-only	Event severity
I32 hostEvtEntryEvtIndex	1.3.6.1.4.1.1714.1.11.4.1.4	Integer32	read-only	Event index
OCT hostEvtEntryEvtType	1.3.6.1.4.1.1714.1.11.4.1.5	OCTET STRING	read-only	Event type
OCT hostEvtEntryEvtCode	1.3.6.1.4.1.1714.1.11.4.1.6	OCTET STRING	read-only	Event code
I32 evtChl	1.3.6.1.4.1.1714.1.11.4.1.7	Integer32	read-only	Host SCSI channel number
I32 hostEvtEntryEvtID	1.3.6.1.4.1.1714.1.11.4.1.8	Integer32	read-only	Host SCSI ID
I32 hostEvtEntryEvtLun	1.3.6.1.4.1.1714.1.11.4.1.9	Integer32	read-only	Host SCSI LUN
ldEvtTable	1.3.6.1.4.1.1714.1.11.5		not-accessible	Logical drive event table
ldEvtEntry	1.3.6.1.4.1.1714.1.11.5.1		not-accessible	Logical drive event entry
I32 ldEvtEntryEvtTableIdx	1.3.6.1.4.1.1714.1.11.5.1.1	Integer32	not-accessible	Event table index
OCT ldEvtEntryEvtSource	1.3.6.1.4.1.1714.1.11.5.1.2	OCTET STRING	read-only	Event source
OCT ldEvtEntryEvtSeverity	1.3.6.1.4.1.1714.1.11.5.1.3	OCTET STRING	read-only	Event severity
I32 ldEvtEntryEvtIndex	1.3.6.1.4.1.1714.1.11.5.1.4	Integer32	read-only	Event index
OCT ldEvtEntryEvtType	1.3.6.1.4.1.1714.1.11.5.1.5	OCTET STRING	read-only	Event type
OCT ldEvtEntryEvtCode	1.3.6.1.4.1.1714.1.11.5.1.6	OCTET STRING	read-only	Event code
I32 ldEvtEntryEvtLdID	1.3.6.1.4.1.1714.1.11.5.1.7	Integer32	read-only	Logical drive ID
I32 evtFailedChl	1.3.6.1.4.1.1714.1.11.5.1.8	Integer32	read-only	Logical channel number of the failed hard drive
I32 evtFailedID	1.3.6.1.4.1.1714.1.11.5.1.9	Integer32	read-only	SCSI ID of the failed hard drive
I32 evtFailedLun	1.3.6.1.4.1.1714.1.11.5.1.10	Integer32	read-only	SCSI LUN of the failed hard drive
gtEvtTable	1.3.6.1.4.1.1714.1.11.6		not-accessible	Generalized target event table
gtEvtEntry	1.3.6.1.4.1.1714.1.11.6.1		not-accessible	Generalized target event entry
I32 gtEvtEntryEvtTableIdx	1.3.6.1.4.1.1714.1.11.6.1.1	Integer32	not-accessible	Event table index
OCT gtEvtEntryEvtSource	1.3.6.1.4.1.1714.1.11.6.1.2	OCTET STRING	read-only	Event source
OCT gtEvtEntryEvtSeverity	1.3.6.1.4.1.1714.1.11.6.1.3	OCTET STRING	read-only	Event severity
I32 gtEvtEntryEvtIndex	1.3.6.1.4.1.1714.1.11.6.1.4	Integer32	read-only	Event index
OCT gtEvtEntryEvtType	1.3.6.1.4.1.1714.1.11.6.1.5	OCTET STRING	read-only	Event type
I32 evtLuDesc	1.3.6.1.4.1.1714.1.11.6.1.6	Integer32	read-only	Logical unit descriptor
I32 evtLuDevDesc	1.3.6.1.4.1.1714.1.11.6.1.7	Integer32	read-only	Logical unit device descriptor
I32 evtLuClass	1.3.6.1.4.1.1714.1.11.6.1.8	Integer32	read-only	Logical unit class code
I32 evtLuSubclass	1.3.6.1.4.1.1714.1.11.6.1.9	Integer32	read-only	Logical unit subclass code
OCT gtEvtEntryEvtCode	1.3.6.1.4.1.1714.1.11.6.1.10	OCTET STRING	read-only	Event code
OCT evtLuDevType	1.3.6.1.4.1.1714.1.11.6.1.11	OCTET STRING	read-only	Logical unit device type
I32 evtLuDevIdx	1.3.6.1.4.1.1714.1.11.6.1.12	Integer32	read-only	Logical unit device index
I32 evtEncChl	1.3.6.1.4.1.1714.1.11.6.1.13	Integer32	read-only	Enclosure(SAF-TE/SES) unit SCSI channel number
I32 evtEncID	1.3.6.1.4.1.1714.1.11.6.1.14	Integer32	read-only	Enclosure(SAF-TE/SES) unit SCSI ID
I32 evtEncLun	1.3.6.1.4.1.1714.1.11.6.1.15	Integer32	read-only	Enclosure(SAF-TE/SES) unit SCSI LUN

RFC description

Infortrend RAID controller and storage array management including cache, disk, and redundancy configuration.

Start monitoring Infortrend EonStor/ESDS RAID storage controller with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download IFT-SNMP-MIB

What Is IFT-SNMP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description