All MIBs › IFT-SNMP-MIB › curAccessDelayTime
curAccessDelayTime
Module: IFT-SNMP-MIB
OID (symbolic): IFT-SNMP-MIB::curAccessDelayTime
OID (numeric): 1.3.6.1.4.1.1714.1.1.5.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Current time to delay prior to first disk access(in 5 seconds unit) == 0 ==> No Delay. == N ==> Delay = N * 5 seconds.
What is curAccessDelayTime?
Reports the current delay, in 5-second units, the controller waits before its first access to a drive after power-up (e.g. a value of N means N*5 seconds). A value of 0 means no delay is applied. This staggers drive spin-up so power supplies aren't overloaded when many drives start at once.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1714.1.1.5.5 snmpwalk -v2c -c public <target> IFT-SNMP-MIB::curAccessDelayTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1714.1.1.5.5.1 snmpget -v2c -c public <target> IFT-SNMP-MIB::curAccessDelayTime.1
Start monitoring Infortrend EonStor/ESDS RAID storage controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IFT-SNMP-MIB::curAccessDelayTime OID value, configure state conditions and alerts, and monitor any Infortrend EonStor/ESDS RAID storage controller from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1714 | infortrend | IFT-SNMP-MIB |
| 1.3.6.1.4.1.1714.1 | extInterface | IFT-SNMP-MIB |
| 1.3.6.1.4.1.1714.1.1 | ctlrConfiguration | IFT-SNMP-MIB |
| 1.3.6.1.4.1.1714.1.1.5 | driveSideParams | IFT-SNMP-MIB |
| 1.3.6.1.4.1.1714.1.1.5.5 | curAccessDelayTime | IFT-SNMP-MIB |