All MIBs › IFT-SNMP-MIB › redCtlrCfg
redCtlrCfg
Module: IFT-SNMP-MIB
OID (symbolic): IFT-SNMP-MIB::redCtlrCfg
OID (numeric): 1.3.6.1.4.1.1714.1.1.6.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Redundant controller configuration For Reading: BITS 0 -- 1: == 0xff - RC Functionality Not Supported. == 0 - RC Functionality Disabled. == 1 - RC Functionality Enabled as Primary. == 2 - RC Functionality Enabled as Secondary. == 3 - RC Functionality Enabled in Autoconfigure Mode. BITS 2 -- 6 : Reserved. BIT 7 : State of Controller Location Signal Support: 0: Not supported, 1: Supported. For Writing: == 0 - Disable Redundant Controller Functionality. == 1 - Enable RC Functionality and set role to Primary. == 2 - Enable RC Functionality and set role to Primary. == 3 - Enable RC Functionality and automatically select role. == 0x81 - Deassert Reset (WO). == 0xc1 - Simulate Primary Controller Failure (WO). == 0xc2 - Simulate Secondary Controller Failure (WO). == 0xc3 - Force secondary controller to kill primary controller Failure (WO). == 0xc4 - Force primary controller to kill secondary controller Failure (WO).
What is redCtlrCfg?
Reports/sets the redundant-controller configuration. On read, bits 0-1 report whether RC functionality is unsupported (0xff), disabled, enabled as primary, enabled as secondary, or in autoconfigure mode, and bit 7 shows whether controller-location-signal support is present; writing values like 0-3 enables/disables RC or selects primary/secondary role, while special values (e.g. 0xc1/0xc2) simulate a controller failure for testing failover.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1714.1.1.6.1 snmpwalk -v2c -c public <target> IFT-SNMP-MIB::redCtlrCfg
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1714.1.1.6.1.1 snmpget -v2c -c public <target> IFT-SNMP-MIB::redCtlrCfg.1
Start monitoring Infortrend EonStor/ESDS RAID storage controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IFT-SNMP-MIB::redCtlrCfg OID value, configure state conditions and alerts, and monitor any Infortrend EonStor/ESDS RAID storage controller from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1714 | infortrend | IFT-SNMP-MIB |
| 1.3.6.1.4.1.1714.1 | extInterface | IFT-SNMP-MIB |
| 1.3.6.1.4.1.1714.1.1 | ctlrConfiguration | IFT-SNMP-MIB |
| 1.3.6.1.4.1.1714.1.1.6 | redundantParams | IFT-SNMP-MIB |
| 1.3.6.1.4.1.1714.1.1.6.1 | redCtlrCfg | IFT-SNMP-MIB |