| OID symbolic | OID numeric | Type | Access | Description |
|---|
| hpnicfFCoE | 1.3.6.1.4.1.11.2.14.11.15.2.120 | | | This MIB module is for configuring and monitoring Fibre Channel
over Ethernet (FCoE) related entities. This MIB defines a
Virtual FC (VFC) Interface as an object that represents either
a VF_Port or a VE_Port on a FCoE Forwarder (FCF). VFC
interfaces can be created either statically (by management
request) or dynamically (at the time of FIP based FLOGI or ELP
request).
Other terminologies used in this MIB are defined by the
Hpnicf FCoE standard, as defined in the FC-BB-5 specification.
This MIB also supports configuration of the following objects:
- Mapping of FCoE VLAN-ID used to carry traffic for a Fabric
- FC-MAP value used by the FCF operating in FPMA mode
- FIP snooping related objects |
| hpnicfFCoEObjects | 1.3.6.1.4.1.11.2.14.11.15.2.120.1 | | | |
| hpnicfFCoEConfig | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1 | | | |
| hpnicfFCoECfgTable | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.1 | | not-accessible | This table facilitates configuration of FCoE parameters
on a per Fibre Channel management instance. |
| hpnicfFCoECfgEntry | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.1.1 | | not-accessible | There is one entry in this table for each
Fibre Channel management instance. |
| OCT hpnicfFCoECfgFcmap | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.1.1.1 | OCTET STRING | read-write | This object configures the FC-MAP value used by the FCF
when operating in FPMA mode. The default value is 0EFC00h,
as written in the standard. |
| T/F hpnicfFCoECfgDynamicVfcCreation | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.1.1.2 | TruthValue | read-write | This object is set to 'true' to enable, or 'false' to
disable, the dynamic creation of VFC interfaces on this FCF.
When set to 'true', VFC interfaces are dynamically created
as and when a FIP-based FLOGI or ELP request is received. |
| U32 hpnicfFCoECfgDefaultFCFPriority | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.1.1.3 | Unsigned32 | read-write | The FIP priority value advertised by the FCF to ENodes by
default. hpnicfFCoEStaticVfcFCFPriority configured for a VFC
interface overrides this setting for the ENode associated
with the VFC. |
| U32 hpnicfFCoECfgDATov | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.1.1.4 | Unsigned32 | read-write | The Discovery_Advertisement_Timeout value configured for
the FCF. This is used as the timeout value in seconds by
the FCF to send periodic Discovery Advertisements. |
| INT hpnicfFCoECfgAddressingMode | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.1.1.5 | INTEGER | read-write | Addressing mode(s) supported by the FCF. Implementations
should fail SetRequests for unsupported modes. |
| hpnicfFCoEVLANTable | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.2 | | not-accessible | In fabrics in which VLANs are deployed, this table facilitates
configuration of VLAN and Virtual Fabric associations in an
FCoE network. In such fabrics, FCoE forwarding for a fabric
is over a VLAN in a (Layer-2) Ethernet network. That is,
reachability between the ENode/remote-FCF and an FCF for a
given fabric is determined by the reachability provided by the
Ethernet network on the corresponding VLAN.
An active entry in this table indicates which VLAN is used
to transport FCoE traffic for a particular Virtual Fabric.
If VLANs are not deployed or not enabled, entries in this table
are ignored by the bridge.
Some implmentations may allow traffic from only one Virtual
Fabric to be transported over a given VLAN. Such
implementations should prevent multiple entries with the same
VLAN-ID from being created in this table.
Modifying existing VLAN-Virtual Fabric associations is not
possible. The specific row must first be deleted and then
a new one created. |
| hpnicfFCoEVLANEntry | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.2.1 | | not-accessible | There is one entry in this table for each VLAN that is
designated to transport FCoE traffic for a given Virtual
Fabric. |
| VLA hpnicfFCoEVLANIndex | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.2.1.1 | VlanIndex | not-accessible | This object identifies the VLAN-ID that the FCoE FCF function
is being enabled for. |
| T11 hpnicfFCoEFabricIndex | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.2.1.2 | T11FabricIndex | not-accessible | This object identifies the Fabric Index of the Virtual Fabric
traffic which is to be transported over the VLAN identified
by hpnicfFCoEVLANIndex. |
| INT hpnicfFCoEVLANOperState | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.2.1.3 | INTEGER | read-only | Operational state of this VLAN-Virtual Fabric association
entry. The 'up' state is achieved when both the Virtual
Fabric and VLAN are valid. |
| ROW hpnicfFCoEVLANRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.2.1.4 | RowStatus | read-create | The status of this conceptual row. The RowStatus becomes active
on successful creation of an entry. |
| hpnicfFCoEStaticVfcTable | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3 | | not-accessible | This table facilitates the creation and deletion of static
VFC interfaces. While VFCs can be dynamically created based on
FIP FLOGI/ELP requests, operators may want to associate certain
pre-configured policy for a particular ENode or a remote-FCF.
In such cases static VFC creation becomes necessary. In addition
to being creating, a static VFC also needs to be associated to
an ENode or remote-FCF. The VFC binding provides such an
associaton. The binding does not need to be specified when
the row for a VFC is created, but may be specified later. |
| hpnicfFCoEStaticVfcEntry | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1 | | not-accessible | There is one entry in this table for each statically created
VFC Interface. |
| U32 hpnicfFCoEStaticVfcIndex | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.1 | Unsigned32 | not-accessible | This index uniquely identifies a static VFC entry in this
table. |
| U32 hpnicfFCoEStaticVfcFCFPriority | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.2 | Unsigned32 | read-create | If this VFC is for a VF_Port this object is used to configure
FCF priority to be advertised to the ENode associated with the
VFC. |
| HPN hpnicfFCoEStaticVfcBindType | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.3 | HpnicfFCoEVfcBindType | read-create | The mechanism to identify the ENode associated with this VFC
if it is of type VF_Port or to identify the remote-FCF
associated with this VFC if it is of type VE_Port. |
| NUM hpnicfFCoEStaticVfcBindIfIndex | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.4 | InterfaceIndexOrZero | read-create | This object is applicable only when the local FCF is
directly connected to an ENode or remote-FCF over a
specific Ethernet interface, in which case this object
contains the ifIndex of said Ethernet interface.
If the ENode or remote-FCF is not directly connected
to the FCF, this value of this object is zero. |
| MAC hpnicfFCoEStaticVfcBindMACAddress | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.5 | MacAddress | read-create | This object is applicable when the ENode or remote-FCF to
which the local FCF is connected is identified by a MAC
address. A FIP frame from a ENode or remote-FCF is
associated with this VFC only if the source MAC address
in the frame is the same as the value of this object. |
| NUM hpnicfFCoEStaticVfcIfIndex | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.6 | InterfaceIndex | read-only | The ifIndex of this Virtual FC interface. |
| TIM hpnicfFCoEStaticVfcCreationTime | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.7 | TimeStamp | read-only | The timestamp of this entry's creation time. |
| STR hpnicfFCoEStaticVfcFailureCause | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.8 | SnmpAdminString | read-only | The cause of failure for the last bind operation. This
object will be zero length if and only if the bind is
successful. |
| ROW hpnicfFCoEStaticVfcRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.9 | RowStatus | read-create | The status of this conceptual row. The RowStatus becomes
active on successful creation of a VFC. The VFC does not
need to be bound for the row to be active, but the VFC must
be bound before becoming operational. |
| hpnicfFCoEFIPSnoopingTable | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.4 | | not-accessible | FCoE provides increased flexibility, but with this flexibility
new challenges arise in assuring highly robust Fabrics. The FCF
does not have the complete control that a Fibre Channel switch
has.
Ethernet bridges commonly provide a feature called Access Control
Lists (ACLs). Properly configured ACLs may emulate a point-to-point
link by providing the traffic enforcement previously discussed.
Furthermore, the FIP protocol has been designed to enable Ethernet
bridges to efficiently monitor FIP frames passing through them. This
data facilitates the automatic configuration of these ACLs. In
addition, the automatic configuration is possible independent of
any other ACLs that may be in use in the network for other
applications. And FIP Snooping is to maintain these ACLs. |
| hpnicfFCoEFIPSnoopingEntry | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.4.1 | | not-accessible | There is one entry in this table for each VLAN that is
designated to ensures that only valid FCoE traffic is allowed. |
| VLA hpnicfFCoEFIPSnoopingVLANIndex | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.4.1.1 | VlanIndex | not-accessible | This object identifies the VLAN-ID that the FIP Snooping function
is being enabled for. |
| T/F hpnicfFCoEFIPSnoopingEnable | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.4.1.2 | TruthValue | read-write | This object is used to enable or disable FIP Snooping on an
Ethernet Bridge. |
| OCT hpnicfFCoEFIPSnoopingFcmap | 1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.4.1.3 | OCTET STRING | read-write | This object configures the FC-MAP value associated with the
FIP snooping Ethernet Bridge. |
