HPN-ICF-DOT11S-MESH-MIB

All MIBs › HPN-ICF-DOT11S-MESH-MIB

Last Updated: 2009-08-01

Category: Technology: Wireless, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages IEEE 802.11s wireless mesh network configuration and status for HP/Comware-based access points and controllers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-DOT11S-MESH-MIB?

HPN-ICF-DOT11S-MESH-MIB manages IEEE 802.11s wireless mesh networking configuration and status for HP Networking (H3C Comware-based) access points and controllers, covering mesh portal profiles, mesh IDs, and access-point roles within a mesh topology. It exposes configuration data via hpnicfDot11sMeshPflTable (mesh profile entries with mesh ID, keep-alive interval, backhaul rate) and related mesh key distributor (MKD) and mesh portal (MP) policy objects. From a monitoring standpoint it lets an admin confirm whether mesh links are enabled and correctly configured (hpnicfDot11sMeshPflEnable, hpnicfDot11sMeshPflRowStatus), and diagnose mesh backhaul health issues by checking configured backhaul rate and keep-alive settings against actual mesh link behavior. It builds on the general IEEE 802.11 wireless standard and the vendor's own WDS/mesh-status object groups, but is not a strict extension of an existing IETF wireless MIB. It is deployed in outdoor or large-campus wireless deployments using HP/H3C Comware access points configured in mesh (wireless backhaul) topology rather than pure wired uplink. Engineers can download the HPN-ICF-DOT11S-MESH-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-DOT11S-MESH-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP Networking / H3C Comware-based mesh access point or wireless controller

Monitoring Examples

An admin can inspect hpnicfDot11sMeshPflTable entries for a given hpnicfDot11sMeshPflMeshID to verify hpnicfDot11sMeshPflBackhaulRate and hpnicfDot11sMeshPflKeepAlive match the deployment plan; a mesh profile showing hpnicfDot11sMeshPflRowStatus as not active would explain why a remote AP has failed to join the mesh backhaul, isolating it from the wired network.

What Can Be Monitored

mesh profile configuration (mesh ID, keep-alive, backhaul rate)
mesh portal/key distributor status
mesh link enable and row status
AP mesh role/policy

Imported Objects

From HPN-ICF-DOT11-REF-MIB

HpnicfDot11RadioElementIndex
hpnicfDot11	MODULE-IDENTITY
hpnicfDot11APElementIndex	OBJECT-TYPE

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using hpnicfDot11sMeshLinkRxTotByte OID:

Select an HP Networking/H3C wireless access point or controller as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfDot11sMeshLinkRxTotByte into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Represents the amount of bytes that the mesh link received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfDot11sAPCfgEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.6.1		not-accessible	Each entry contains mesh configure information of the specified AP.
hpnicfDot11sAPCfgTable	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.6		not-accessible	This table is used to configure mesh to the specified AP.
HPN hpnicfDot11sCfgRadioIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1.1	HpnicfDot11RadioElementIndex	not-accessible	Represents index of the radio.
hpnicfDot11sConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1
I32 hpnicfDot11sLinkHoldRSSI	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.7	Integer32	read-create	This object represents the link-hold receive signal strength indicator (RSSI).
I32 hpnicfDot11sLinkHoldTime	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.8	Integer32	read-create	This object represents the link-hold time.
INT hpnicfDot11sLinkRateMode	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.11	INTEGER	read-create	This object represents the rate mode of the mesh link.
I32 hpnicfDot11sLinkSaturationRSSI	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.10	Integer32	read-create	This object represents the link saturation receive signal strength indicator (RSSI).
I32 hpnicfDot11sMaxLinkNum	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.12	Integer32	read-create	This object represents the maximum number of the mesh link.
hpnicfDot11sMesh	1.3.6.1.4.1.11.2.14.11.15.2.75.11			The file defines a MIB to provide MESH configuration information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Mesh A network consisting of two or more mesh points which communicate with each other via mesh services. Mesh Point (MP) An IEEE 802.11 entity that contains an IEEE 802.11-conformant medium access control (MAC) and physical layer (PHY) interface to the wireless medium (WM) that supports mesh services. Mesh Access Point (MAP) A mesh point that is collocated with one or more access points. Mesh Portal Point (MPP) A mesh point that is collocated with one or more portals. Mesh Link A link between two MPs.
hpnicfDot11sMeshGlobalPara	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.1
MAC hpnicfDot11sMeshLinkBSSID	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.3	MacAddress	read-only	This object represents the BSS ID of the mesh link.
I32 hpnicfDot11sMeshLinkExistDuration	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.5	Integer32	read-only	This object represents the time for which the link has been up.
U32 hpnicfDot11sMeshLinkIfIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.1	Unsigned32	not-accessible	This object represents the interface index of the mesh link.
OCT hpnicfDot11sMeshLinkIFName	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.15	OCTET STRING	read-only	Represents the name of mesh link interface.
U32 hpnicfDot11sMeshLinkInMp	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.7	Unsigned32	read-only	Represents the interface index of mesh link that used to connect with this neighbor.
OCT hpnicfDot11sMeshLinkName	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.2	OCTET STRING	read-only	This object represents the name of the mesh link.
U32 hpnicfDot11sMeshLinkNbrIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.2	Unsigned32	read-only	Represents the neighbor index of the mesh link.
MAC hpnicfDot11sMeshLinkPeerMac	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.4	MacAddress	read-only	This object represents the peer MAC address of the mesh link.
C32 hpnicfDot11sMeshLinkRxBrocPkt	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.6	Counter32	read-only	Represents the amount of broadcast packets that the mesh link received.
C32 hpnicfDot11sMeshLinkRxDiscPkt	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.8	Counter32	read-only	Represents the amount of packets that the mesh link discarded.
C32 hpnicfDot11sMeshLinkRxMuticPkt	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.7	Counter32	read-only	Represents the amount of multicast packets that the mesh link received.
C32 hpnicfDot11sMeshLinkRxTotByteEx	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.3	Counter32	read-only	Represents the amount of bytes that the mesh link received.
C32 hpnicfDot11sMeshLinkRxTotPkt	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.4	Counter32	read-only	Represents the amount of packets that the mesh link received.
C32 hpnicfDot11sMeshLinkRxUniPkt	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.5	Counter32	read-only	Represents the amount of unicast packets that the mesh link received.
U32 hpnicfDot11sMeshLinkStatIfIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.1	Unsigned32	not-accessible	This object represents the interface index of the mesh link.
hpnicfDot11sMeshLinkStatisEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1		not-accessible	Each entry contains statistical information of mesh link.
hpnicfDot11sMeshLinkStatisTable	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2		not-accessible	This table is used to represent the statistical information of mesh link.
hpnicfDot11sMeshLinkStatusEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1		not-accessible	Each entry contains status information of mesh link.
hpnicfDot11sMeshLinkStatusTable	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1		not-accessible	This table is used to represent the status of mesh link.
C32 hpnicfDot11sMeshLinkTxBrocPkt	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.12	Counter32	read-only	Represents the amount of broadcast packets that the mesh link transmitted.
C32 hpnicfDot11sMeshLinkTxDiscPkt	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.14	Counter32	read-only	Represents the amount of discarded packets that the mesh link transmitted.
C32 hpnicfDot11sMeshLinkTxMuticPkt	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.13	Counter32	read-only	Represents the amount of multicast packets that the mesh link transmitted.
C32 hpnicfDot11sMeshLinkTxTotByte	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.9	Counter32	read-only	Represents the total amount of bytes that the mesh link transmitted.
C32 hpnicfDot11sMeshLinkTxTotPkt	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.10	Counter32	read-only	Represents the total amount of packets that the mesh link transmitted.
C32 hpnicfDot11sMeshLinkTxUniPkt	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.11	Counter32	read-only	Represents the amount of unicast packets that the mesh link transmitted.
INT hpnicfDot11sMeshLinkType	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.6	INTEGER	read-only	This object represents the type for the link.
OCT hpnicfDot11sMeshLocalMeshID	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.3	OCTET STRING	read-only	Represents the local mesh ID.
MAC hpnicfDot11sMeshMkdID	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.1.1	MacAddress	read-write	This object represents the mesh key distributor identifier (MKD-ID). If the MKD-ID is not configured, the value is '00:00:00:00:00:00'.
T/F hpnicfDot11sMeshMkdServEnable	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.6	TruthValue	read-create	This object indicates whether the mesh key distributor (MKD) service for the mesh profile is enabled. 'true': The MKD service for the mesh profile is enabled. 'false': The MKD service for the mesh profile is disabled.
INT hpnicfDot11sMeshMPLinkStatus	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.8	INTEGER	read-only	Represents the status of mesh link that used to connect with this neighbor.
MAC hpnicfDot11sMeshNbrBSSID	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.5	MacAddress	read-only	Represents the BSS ID of the neighbor.
U32 hpnicfDot11sMeshNbrChannel	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.9	Unsigned32	read-only	Represents the channel number used by this neighbor.
U32 hpnicfDot11sMeshNbrIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.1	Unsigned32	not-accessible	Represents the index for the neighbor.
I32 hpnicfDot11sMeshNbrLinkDuration	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.10	Integer32	read-only	Represents the duration of mesh link that used to connect with this neighbor.
OCT hpnicfDot11sMeshNbrMeshID	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.4	OCTET STRING	read-only	Represents the mesh ID of the neighbor.
MAC hpnicfDot11sMeshNbrPeerMac	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.6	MacAddress	read-only	Represents the MAC address of the peer neighbor.
U32 hpnicfDot11sMeshNbrRadioID	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.2	Unsigned32	read-only	Represents the radio ID of the neighbor.
I32 hpnicfDot11sMeshNbrRSSI	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.11	Integer32	read-only	Represents the RSSI of mesh link that used to connect with this neighbor.
I32 hpnicfDot11sMeshNbrSNR	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.12	Integer32	read-only	Represents the SNR of mesh link that used to connect with this neighbor.
hpnicfDot11sMeshNbrStatusEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1		not-accessible	Each entry of the table will provide status information for the neighbors of MP.
hpnicfDot11sMeshNbrStatusTable	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3		not-accessible	This table represents the status information for the neighbors of MP.
I32 hpnicfDot11sMeshPflBackhaulRate	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.5	Integer32	read-create	This object represents the link backhaul rate.
I32 hpnicfDot11sMeshPflBindIntNum	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.3	Integer32	read-create	This object represents the specified mesh interface number binding to the mesh profile. If the value is set to -1, the binding will be removed. If the mesh interface is not specified, the value of hpnicfDot11sMeshPflEnable can not be set to 'true'.
T/F hpnicfDot11sMeshPflEnable	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.7	TruthValue	read-create	This object indicates whether the mesh profile is enabled. 'true': The mesh profile is enabled. 'false': The mesh profile is disabled.
hpnicfDot11sMeshPflEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1		not-accessible	Each entry contains information of a mesh profile.
I32 hpnicfDot11sMeshPflIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.1	Integer32	not-accessible	This object represents the index of the mesh profile.
I32 hpnicfDot11sMeshPflKeepAlive	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.4	Integer32	read-create	This object represents the mesh link keep-alive interval.
I32 hpnicfDot11sMeshPflMap	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1.2	Integer32	read-write	This object represents the number of the mesh profile mapped to the specified radio. The value is zero when the radio is not binding mesh profile.
OCT hpnicfDot11sMeshPflMeshID	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.2	OCTET STRING	read-create	This object represents the mesh ID of the mesh profile. The string length of this object is zero when the mesh ID is not configured. If the mesh ID is not configured, hpnicfDot11sMeshPflEnable can not be set to 'true'.
ROW hpnicfDot11sMeshPflRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.8	RowStatus	read-create	The status of this table entry.
hpnicfDot11sMeshPflTable	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2		not-accessible	This table is used to configure mesh profile. A mesh profile is created and mapped to a MP so that it can provide mesh services to other MPs which have the same mesh ID. When the mesh profile is enabled, all of the object in this table can not be modified except hpnicfDot11sMeshPflEnable. The mesh profile can not be deleted when it is bound with the radio.
hpnicfDot11sMeshStatusGroup	1.3.6.1.4.1.11.2.14.11.15.2.75.11.3
hpnicfDot11sMlspCfgEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1		not-accessible	Each entry contains information of MLSP proxy MAC address.
hpnicfDot11sMlspCfgTable	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4		not-accessible	This table is used to configure MLSP proxy MAC address. Only if the specified MP policy is modifiable and the MLSP is enabled, the row of this table can be created and deleted. The row of this table can not be modified.
T/F hpnicfDot11sMlspEnable	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.4	TruthValue	read-create	This object indicates whether the mesh link switch protocol (MLSP) is enabled. 'true': MLSP is enabled. 'false': MLSP is disabled.
I32 hpnicfDot11sMlspProxyIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1.1	Integer32	not-accessible	This object represents the MLSP proxy MAC address index.
MAC hpnicfDot11sMlspProxyMac	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1.2	MacAddress	read-create	This object represents the MLSP proxy MAC address.
ROW hpnicfDot11sMlspRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1.3	RowStatus	read-create	The status of this table entry.
hpnicfDot11sMpPlcyEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1		not-accessible	Each entry contains information of a MP policy.
I32 hpnicfDot11sMpPlcyIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.1	Integer32	not-accessible	This object represents the MP policy index.
T/F hpnicfDot11sMpPlcyInitEnable	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.3	TruthValue	read-create	This object indicates whether the link initiation for the MP policy is enabled. 'true': The link initiation for the MP policy is enabled. 'false': The link initiation for the MP policy is disabled.
I32 hpnicfDot11sMpPlcyMap	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1.3	Integer32	read-write	This object represents the index of the MP policy mapped to the specified radio. The MP policy is 'default_mp_plcy' when the radio is not binding user-defined MP policy. The index of 'default_mp_plcy' is 1. This object can not be modified when the radio is enabled.
OCT hpnicfDot11sMpPlcyName	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.2	OCTET STRING	read-create	This object represents the MP policy name. MP policy can not be created with name 'a', 'al', 'all' or 'default_mp_plcy'. Modification is not supported.
ROW hpnicfDot11sMpPlcyRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.13	RowStatus	read-create	The status of this table entry.
hpnicfDot11sMpPlcyTable	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3		not-accessible	This table is used to configure MP policy. There is 'default_mp_plcy' on system by default and its index is 1. The 'default_mp_plcy' can not be deleted or modified. The MP policy can not be deleted when it is applied to a radio. It can not be modified when it is applied to an enabled radio.
T/F hpnicfDot11sPortalEnable	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.6.1.1	TruthValue	read-write	This object indicates whether the portal service is enabled. 'true': The portal service is enabled. 'false': The portal service is disabled.
I32 hpnicfDot11sProbReqInterval	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.5	Integer32	read-create	This object represents the probe request interval.
hpnicfDot11sRadioCfgEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1		not-accessible	Each entry contains mesh configure information of the specified radio.
hpnicfDot11sRadioCfgTable	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5		not-accessible	This table is used to configure mesh to the specified radio.
T/F hpnicfDot11sRoleAuthEnable	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.6	TruthValue	read-create	This object indicates whether the device can play as the role of an authenticator.
I32 hpnicfDot11sSwitchMargin	1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.9	Integer32	read-create	This object represents the link-switch margin.
hpnicfDot11sWDSConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.75.11.2
MAC hpnicfDot11sWDSPeerMacAddrss	1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1.2	MacAddress	read-create	This object represents the peer MAC address.
hpnicfDot11sWDSPeerMacEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1		not-accessible	Each entry contains information of WDS.
I32 hpnicfDot11sWDSPeerMacIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1.1	Integer32	not-accessible	This object represents the peer MAC address index.
ROW hpnicfDot11sWDSPeerMacRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1.3	RowStatus	read-create	The status of this table entry.
hpnicfDot11sWDSPeerMacTable	1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1		not-accessible	This table is used to configure wireless distribution system (WDS). The row of this table can not be modified.

RFC description

802.11s mesh networking MIB for configuring mesh points and link statistics.

Start monitoring HP Networking/H3C wireless access points and controllers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-DOT11S-MESH-MIB