| OID symbolic | OID numeric | Type | Access | Description |
|---|
| dlinkSwVlanMIB | 1.3.6.1.4.1.171.26.21 | | | This MIB module defines objects for extending the configuration of
VLAN (Virtual Local Area Network). |
| dVlanMIBNotifications | 1.3.6.1.4.1.171.26.21.0 | | | |
| dVlanMIBObjects | 1.3.6.1.4.1.171.26.21.1 | | | |
| dVlanStaticMacVlanTable | 1.3.6.1.4.1.171.26.21.1.1 | | not-accessible | This table contains a list of MAC-based VLANs. |
| dVlanStaticMacVlanEntry | 1.3.6.1.4.1.171.26.21.1.1.1 | | not-accessible | A table entry represents the configuration of a MAC-based VLAN. |
| MAC dVlanStaticMacVlanAddress | 1.3.6.1.4.1.171.26.21.1.1.1.1 | MacAddress | not-accessible | This object indicates the MAC address of the entry. |
| VLA dVlanStaticMacVlanId | 1.3.6.1.4.1.171.26.21.1.1.1.2 | VlanId | read-create | This object indicates the Vlan ID for the MAC based VLAN entry. |
| U32 dVlanStaticMacVlanPriority | 1.3.6.1.4.1.171.26.21.1.1.1.3 | Unsigned32 | read-create | This object indicates the CoS for the MAC based VLAN entry. |
| ROW dVlanStaticMacVlanRowStatus | 1.3.6.1.4.1.171.26.21.1.1.1.4 | RowStatus | read-create | The status of this conceptual row. |
| dVlanCurrentMacVlanTable | 1.3.6.1.4.1.171.26.21.1.2 | | not-accessible | This table contains a list of MAC-based VLANs. |
| dVlanCurrentMacVlanEntry | 1.3.6.1.4.1.171.26.21.1.2.1 | | not-accessible | A table entry represents the information of a MAC-based VLAN. |
| MAC dVlanCurrentMacVlanAddress | 1.3.6.1.4.1.171.26.21.1.2.1.1 | MacAddress | not-accessible | This object indicates the MAC address of the entry. |
| INT dVlanCurrentMacVlanStatus | 1.3.6.1.4.1.171.26.21.1.2.1.2 | INTEGER | not-accessible | This object indicates the status of the entry. |
| VLA dVlanCurrentMacVlanId | 1.3.6.1.4.1.171.26.21.1.2.1.3 | VlanId | read-only | This object indicates the Vlan ID for the MAC based VLAN entry. |
| U32 dVlanCurrentMacVlanPriority | 1.3.6.1.4.1.171.26.21.1.2.1.4 | Unsigned32 | read-only | This object indicates the CoS for the MAC based VLAN entry. |
| dVlanSubnetVlanTable | 1.3.6.1.4.1.171.26.21.1.3 | | not-accessible | This table contains a list of subnet-based VLANs. |
| dVlanSubnetVlanEntry | 1.3.6.1.4.1.171.26.21.1.3.1 | | not-accessible | A table entry represents the configuration of a subnet-based VLAN. |
| IPt dVlanSubnetVlanType | 1.3.6.1.4.1.171.26.21.1.3.1.1 | InetAddressType | not-accessible | This object indicates the address type of the subnet. |
| IP dVlanSubnetVlanNetPrefix | 1.3.6.1.4.1.171.26.21.1.3.1.2 | InetAddress | not-accessible | This object indicates the network prefix of the entry. |
| ADR dVlanSubnetVlanNetPrefixLen | 1.3.6.1.4.1.171.26.21.1.3.1.3 | InetAddressPrefixLength | not-accessible | This object indicates the length of the sub-network
address prefix. |
| VLA dVlanSubnetVlanId | 1.3.6.1.4.1.171.26.21.1.3.1.4 | VlanId | read-create | This object indicates the VLAN-ID of the subnet-based VLAN. |
| U32 dVlanSubnetVlanPriority | 1.3.6.1.4.1.171.26.21.1.3.1.5 | Unsigned32 | read-create | This object indicates the CoS of the subnet-based VLAN. |
| ROW dVlanSubnetVlanRowStatus | 1.3.6.1.4.1.171.26.21.1.3.1.6 | RowStatus | read-create | The status of this conceptual row. |
| dVlanPortIfCtrlTable | 1.3.6.1.4.1.171.26.21.1.4 | | not-accessible | This table provides mechanism to configure port-specific VLAN
function. |
| dVlanPortIfCtrlEntry | 1.3.6.1.4.1.171.26.21.1.4.1 | | not-accessible | A table entry represents the VLAN configuration on a port.
This table is an extension to dot1qPortVlanTable which is defined at
Q-BRIDGE-MIB. |
| INT dVlanPortIfMode | 1.3.6.1.4.1.171.26.21.1.4.1.1 | INTEGER | read-write | This object indicates VLAN mode for the port.
access - this port will be untagged member of the access VLAN
configured for the port.
hybrid - the port can be untagged or tagged member of all VLANs
configured by the user. The purpose of this VLAN mode is
to support protocol VLAN, MAC-based VLAN, voice VLAN and
dot1q VLAN tunnel application in access side.
trunk - this port is either tagged or untagged member port of its
native VLAN and can be tagged member of other VLANs
configured by the user. The purpose of a trunk port is to
support the switch-to-switch connection.
dot1qTunnel - the port behaves as an UNI port of a service VLAN.
privateVlanHost - the port behaves as private VLAN host port.
privateVlanPromiscuous - the port behaves as private VLAN promiscuous
port.
When VLAN mode is changed, the VLAN related setting associated
with previous mode will be lost. |
| T/F dVlanPortIfTrunkNativeVlanTagged | 1.3.6.1.4.1.171.26.21.1.4.1.2 | TruthValue | read-write | This object indicates whether enable the tagging mode of the native
VLAN on the interface.
Note: This value is meaningful only when the VLAN mode of the port
is 'trunk'. |
| INT dVlanPortIfAcceptableFrameTypes | 1.3.6.1.4.1.171.26.21.1.4.1.3 | INTEGER | read-write | This object indicates the acceptable frame types on the interface.
'admitAll' - Permits both tagged and untagged packet.
'admitUntaggedAndPriority' - Only untagged or Priority-Tagged packets
received on this interface will be accepted and tagged packets are
dropped.
'admitTagged' - Only tagged incoming packets are permitted and untagged packets
are dropped. |
| INT dVlanPortIfVlanPrecedence | 1.3.6.1.4.1.171.26.21.1.4.1.4 | INTEGER | read-write | This object indicates the VLAN classification precedence for the port.
macVlan - MAC-based VLAN classification has higher precedence than
subnet-based VLAN.
subnetVlan - subnet-based VLAN classification has higher precedence
than MAC-based VLAN.
Note: This value is meaningful only when the VLAN mode of the port
is 'hybrid' or 'dot1qTunnel'. |
| DLI dVlanPortIfTagAllowVlanLstFirst2K | 1.3.6.1.4.1.171.26.21.1.4.1.5 | Dlink2kVlanList | read-write | This object specifies the VLANs in a string of octets containing
one bit per VLAN for VLANs 1 to 2048.
If the bit is set to '1', then the interface is allowed to be the
VLAN's tagged member.
Note: This value is meaningful only when the VLAN mode of the port
is 'hybrid' or 'trunk'. |
| DLI dVlanPortIfTagAllowVlanLstSecond2K | 1.3.6.1.4.1.171.26.21.1.4.1.6 | Dlink2kVlanList | read-write | This object specifies the VLANs in a string of octets containing
one bit per VLAN for VLANs 2049 to 4094.
If the bit is set to '1', then the interface is allowed to be the
VLAN's tagged member.
Note: This value is meaningful only when the VLAN mode of the port
is 'hybrid' or 'trunk'. |
| DLI dVlanPortIfUntagAllowVlanLstFirst2K | 1.3.6.1.4.1.171.26.21.1.4.1.7 | Dlink2kVlanList | read-write | This object specifies the VLANs in a string of octets containing
one bit per VLAN for VLANs 1 to 2048.
If the bit is set to '1', then the interface is allowed to be the
VLAN's untagged member.
Note: This value is meaningful only when the VLAN mode of the port
is 'hybrid' or 'trunk'. |
| DLI dVlanPortIfUntagAllowVlanLstSecond2K | 1.3.6.1.4.1.171.26.21.1.4.1.8 | Dlink2kVlanList | read-write | This object specifies the VLANs in a string of octets containing
one bit per VLAN for VLANs 2049 to 4094.
If the bit is set to '1', then the interface is allowed to be the
VLAN's untagged member.
Note: This value is meaningful only when the VLAN mode of the port
is 'hybrid' or 'trunk'. |
| dVlanProtocolVlanIfCtrlTable | 1.3.6.1.4.1.171.26.21.1.5 | | not-accessible | This table provides mechanism to configure port-specific protocol
VLAN function.
This table is an extension to dot1vProtocolPortTable which is defined
at Q-BRIDGE-MIB.
An entry appears in this table for each row created at
dot1vProtocolPortTable. |
| dVlanProtocolVlanIfCtrlEntry | 1.3.6.1.4.1.171.26.21.1.5.1 | | not-accessible | A table entry represents the extension configuration of protocol
VLAN profile on a port. |
| U32 dVlanProtocolVlanPriority | 1.3.6.1.4.1.171.26.21.1.5.1.1 | Unsigned32 | read-write | This object indicates the CoS of the protocol VLAN entry on the
interface. |
| T/F dVlanAsymVlanStateEnabled | 1.3.6.1.4.1.171.26.21.1.6 | TruthValue | read-write | This object enables or disables asymmetric VLAN feature. |
| dVlanMIBConformance | 1.3.6.1.4.1.171.26.21.2 | | | |
| dVlanCompliances | 1.3.6.1.4.1.171.26.21.2.1 | | | |
| dVlanCompliance | 1.3.6.1.4.1.171.26.21.2.1.1 | | | The compliance statement for entities which implement the
DLINKSW-VLAN-MIB. |
| dVlanGroups | 1.3.6.1.4.1.171.26.21.2.2 | | | |
| dVlanIfCfgGroup | 1.3.6.1.4.1.171.26.21.2.2.1 | | | A collection of objects providing the information
and control for configuring port-specific VLAN feature. |
| dVlanStaticMacVlanCfgGroup | 1.3.6.1.4.1.171.26.21.2.2.2 | | | A collection of objects provides the configuration
of MAC-based VLANs. |
| dVlanCurrentMacVlanCfgGroup | 1.3.6.1.4.1.171.26.21.2.2.3 | | | A collection of objects provides the running MAC-based
VLANs. |
| dVlanSubnetVlanCfgGroup | 1.3.6.1.4.1.171.26.21.2.2.4 | | | A collection of objects provides the configuration
of subnet-based VLANs. |
| dVlanProtocolVlanCfgGroup | 1.3.6.1.4.1.171.26.21.2.2.5 | | | A collection of objects provides the configuration
of protocol VLAN entrys on interfaces. |
| dVlanAsymmetricVlanCfgGroup | 1.3.6.1.4.1.171.26.21.2.2.6 | | | A collection of objects provides the management of
asymmetric VLAN feature. |
