DLINKSW-VLAN-MIB :: dVlanPortIfUntagAllowVlanLstFirst2K

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DLINKSW-VLAN-MIB › dVlanPortIfUntagAllowVlanLstFirst2K

dVlanPortIfUntagAllowVlanLstFirst2K

Module: DLINKSW-VLAN-MIB

OID (symbolic): DLINKSW-VLAN-MIB::dVlanPortIfUntagAllowVlanLstFirst2K

OID (numeric): 1.3.6.1.4.1.171.26.21.1.4.1.7

Node type: OBJECT-TYPE

Type: Dlink2kVlanList

Access: read-write

Description: This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 1 to 2048.

If the bit is set to '1', then the interface is allowed to be the VLAN's untagged member.

Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'trunk'.

What is dVlanPortIfUntagAllowVlanLstFirst2K?

This value is a bitmap, one bit per VLAN, covering VLAN IDs 1 through 2048, that specifies which of those VLANs a hybrid or trunk port is permitted to carry as an untagged member. An admin uses it to let a port send and receive certain VLANs without 802.1Q tags, typically for legacy end devices that can't handle tagged frames. For example, setting the bit for VLAN 10 lets an untagged legacy device on that port participate in VLAN 10 without needing a tag-aware network card.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.26.21.1.4.1.7
snmpwalk -v2c -c public <target> DLINKSW-VLAN-MIB::dVlanPortIfUntagAllowVlanLstFirst2K

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.26.21.1.4.1.7.1
snmpget -v2c -c public <target> DLINKSW-VLAN-MIB::dVlanPortIfUntagAllowVlanLstFirst2K.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.26.21.1.4.1.7.1 s <value>

Start monitoring D-Link managed switch (VLAN/MAC-based VLAN extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLINKSW-VLAN-MIB::dVlanPortIfUntagAllowVlanLstFirst2K OID value, configure state conditions and alerts, and monitor any D-Link managed switch (VLAN/MAC-based VLAN extensions) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.26dlinkIndustrialCommonDLINK-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.26.21dlinkSwVlanMIBDLINKSW-VLAN-MIB
1.3.6.1.4.1.171.26.21.1dVlanMIBObjectsDLINKSW-VLAN-MIB
1.3.6.1.4.1.171.26.21.1.4dVlanPortIfCtrlTableDLINKSW-VLAN-MIB
1.3.6.1.4.1.171.26.21.1.4.1dVlanPortIfCtrlEntryDLINKSW-VLAN-MIB
1.3.6.1.4.1.171.26.21.1.4.1.7dVlanPortIfUntagAllowVlanLstFirst2KDLINKSW-VLAN-MIB