| OID symbolic | OID numeric | Type | Access | Description |
|---|
| dsBridge | 1.3.6.1.4.1.6296.9.1.1.2.22 | | | The MIB module to describe bridge of DASAN product. |
| dsVlanBase | 1.3.6.1.4.1.6296.9.1.1.2.22.1 | | | |
| INT dsVlanVersionNumber | 1.3.6.1.4.1.6296.9.1.1.2.22.1.1 | INTEGER | read-only | The version number of IEEE 802.1Q that this device
supports. |
| VLA dsVlanMaxVlanId | 1.3.6.1.4.1.6296.9.1.1.2.22.1.2 | VlanId | read-only | The maximum IEEE 802.1Q VLAN ID that this device
supports. |
| U32 dsVlanMaxSupportedVlans | 1.3.6.1.4.1.6296.9.1.1.2.22.1.3 | Unsigned32 | read-only | The maximum number of VLANs that this
device supports. |
| U32 dsVlanNumVlans | 1.3.6.1.4.1.6296.9.1.1.2.22.1.4 | Unsigned32 | read-only | The current number of VLANs that are
configured in this device. |
| INT dsVlanGvrpStatus | 1.3.6.1.4.1.6296.9.1.1.2.22.1.5 | INTEGER | read-write | The administrative status requested by management for
GVRP. The value enabled(1) indicates that GVRP should
be enabled on this device, on all ports for which it has
not been specifically disabled. When disabled(2), GVRP
is disabled on all ports and all GVRP packets will be
forwarded transparently. This object affects all GVRP
Applicant and Registrar state machines. A transition
from disabled(2) to enabled(1) will cause a reset of all
GVRP state machines on all ports. |
| dsVlanCurrentTable | 1.3.6.1.4.1.6296.9.1.1.2.22.2 | | not-accessible | A table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received. |
| dsVlanCurrentEntry | 1.3.6.1.4.1.6296.9.1.1.2.22.2.1 | | not-accessible | Information for a VLAN configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received. |
| VLA dsVlanIndex | 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.1 | VlanIndex | read-only | The VLAN-ID or other identifier refering to this VLAN. |
| OCT dsVlanName | 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.2 | OCTET STRING | read-only | The VLAN-NAME to this VLAN. |
| U32 dsVlanFdbId | 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.3 | Unsigned32 | read-only | The Filtering Database used by this VLAN. This value is
allocated automatically by the device whenever the VLAN
is created: either dynamically by GVRP, or by management,
in dot1qVlanStaticTable. Allocation of this value follows
the learning constraints defined for this VLAN in
dot1qLearningConstraintsTable. |
| POR dsVlanCurrentEgressPorts | 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.4 | PortList | read-only | The set of ports which are transmitting traffic for
this VLAN as either tagged or untagged frames. |
| POR dsVlanCurrentUntaggedPorts | 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.5 | PortList | read-only | The set of ports which are transmitting traffic for
this VLAN as untagged frames. |
| INT dsVlanStatus | 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.6 | INTEGER | read-only | This object indicates the status of this entry.
other(1) - this entry is currently in use but the
conditions under which it will remain so differ
from the following values.
permanent(2) - this entry, corresponding to an entry
in dot1qVlanStaticTable, is currently in use and
will remain so after the next reset of the
device. The port lists for this entry include
ports from the equivalent dot1qVlanStaticTable
entry and ports learnt dynamically.
dynamicGvrp(3) - this entry is currently in use
and will remain so until removed by GVRP. There
is no static entry for this VLAN and it will be
removed when the last port leaves the VLAN. |
| TIK dsVlanCreationTime | 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.7 | TimeTicks | read-only | The value of sysUpTime when this VLAN was created. |
| POR dsVlanCurrentPhysicalPorts | 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.8 | PortList | read-only | The set of ports which are physical. |
| dsTp | 1.3.6.1.4.1.6296.9.1.1.2.22.3 | | | |
| dsTpFdbTable | 1.3.6.1.4.1.6296.9.1.1.2.22.3.1 | | not-accessible | A table that contains information about unicast entries
for which the device has forwarding and/or filtering
information. This information is used by the
transparent bridging function in determining how to
propagate a received frame. |
| dsTpFdbEntry | 1.3.6.1.4.1.6296.9.1.1.2.22.3.1.1 | | not-accessible | Information about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information. |
| INT dsTpFdbFid | 1.3.6.1.4.1.6296.9.1.1.2.22.3.1.1.1 | INTEGER | read-only | The identity of this Filtering Database. |
| OCT dsTpFdbVlanName | 1.3.6.1.4.1.6296.9.1.1.2.22.3.1.1.2 | OCTET STRING | read-only | The name of VLAN related to this Filtering Database. |
| OCT dsTpFdbAddress | 1.3.6.1.4.1.6296.9.1.1.2.22.3.1.1.3 | OCTET STRING | read-only | A unicast MAC address for which the bridge has
forwarding and/or filtering information. |
| I32 dsTpFdbPort | 1.3.6.1.4.1.6296.9.1.1.2.22.3.1.1.4 | Integer32 | read-only | Either the value '0', or the port number of the port on
which a frame having a source address equal to the value
of the corresponding instance of dsTpFdbAddress has
been seen. |
| INT dsTpFdbStatus | 1.3.6.1.4.1.6296.9.1.1.2.22.3.1.1.5 | INTEGER | read-only | The status of this entry. The meanings of the values
are:
other(1) - none of the following.
invalid(2) - this entry is no longer valid (e.g., it
was learned but has since aged out), but has not
yet been flushed from the table.
learned(3) - the value of the corresponding instance
of dsTpFdbPort was learned and is being used.
self(4) - the value of the corresponding instance of
dsTpFdbAddress represents one of the device's
addresses. The corresponding instance of
dsTpFdbPort indicates which of the device's
ports has this address.
mgmt(5) - the value of the corresponding instance of
dsTpFdbAddress is also the value of an
existing instance of dsStaticAddress. |
| dsStpBase | 1.3.6.1.4.1.6296.9.1.1.2.22.4 | | | |
| dsStpTable | 1.3.6.1.4.1.6296.9.1.1.2.22.5 | | not-accessible | The table of STP supported this device. |
| dsStpEntry | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1 | | not-accessible | The table of STP supported this device. |
| INT dsStpIndex | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.1 | INTEGER | read-only | . |
| INT dsStpVid | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.2 | INTEGER | read-only | . |
| INT dsStpProtocolSpecification | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.3 | INTEGER | read-only | An indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
future versions of the IEEE Spanning Tree Protocol
are released that are incompatible with the
current version a new value will be defined. |
| I32 dsStpPriority | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.4 | Integer32 | read-write | The value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
dot1dBaseBridgeAddress. |
| TIK dsStpTimeSinceTopologyChange | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.5 | TimeTicks | read-only | The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity. |
| CTR dsStpTopChangesEx | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.6 | Counter | read-only | The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized. |
| BRI dsStpDesignatedRoot | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.7 | BridgeId | read-only | The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node. |
| INT dsStpRootCost | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.8 | INTEGER | read-only | The cost of the path to the root as seen from
this bridge. |
| INT dsStpRootPort | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.9 | INTEGER | read-only | The port number of the port which offers the
lowest cost path from this bridge to the root
bridge. |
| TIM dsStpMaxAge | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.10 | Timeout | read-only | The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using. |
| TIM dsStpHelloTime | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.11 | Timeout | read-only | The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using. |
| INT dsStpHoldTime | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.12 | INTEGER | read-only | This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second. |
| TIM dsStpForwardDelay | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.13 | Timeout | read-only | This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
dot1dStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.] |
| TIM dsStpBridgeMaxAge | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.14 | Timeout | read-write | The value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
dot1dStpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds. |
| TIM dsStpBridgeHelloTime | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.15 | Timeout | read-write | The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds. |
| TIM dsStpBridgeForwardDelay | 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.16 | Timeout | read-write | The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
dot1dStpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds. |
| dsStpPortTable | 1.3.6.1.4.1.6296.9.1.1.2.22.6 | | not-accessible | The port table of STP supported this device. |
| dsStpPortEntry | 1.3.6.1.4.1.6296.9.1.1.2.22.6.1 | | not-accessible | The port table of STP supported this device. |
| I32 dsStpPort | 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.1 | Integer32 | read-only | The port number of the port for which this entry
contains Spanning Tree Protocol management
information. |
| I32 dsStpPortPriority | 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.2 | Integer32 | read-write | The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
dot1dStpPort. |
| INT dsStpPortState | 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.3 | INTEGER | read-only | The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see dsStpPortEnable), this object
will have a value of disabled(1). |
| INT dsStpPortEnable | 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.4 | INTEGER | read-write | The enabled/disabled status of the port. |
| I32 dsStpPortPathCost | 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.5 | Integer32 | read-write | The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN. |
| BRI dsStpPortDesignatedRoot | 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.6 | BridgeId | read-only | The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached. |
| INT dsStpPortDesignatedCost | 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.7 | INTEGER | read-only | The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs. |
| BRI dsStpPortDesignatedBridge | 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.8 | BridgeId | read-only | The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment. |
| OCT dsStpPortDesignatedPort | 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.9 | OCTET STRING | read-only | The Port Identifier of the port on the Designated
Bridge for this port's segment. |
| CTR dsStpPortForwardTransitions | 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.10 | Counter | read-only | The number of times this port has transitioned
from the Learning state to the Forwarding state. |
