| OID symbolic | OID numeric | Type | Access | Description |
|---|
| myPrivateVlanMIB | 1.3.6.1.4.1.171.10.97.2.44 | | | The MIB module to support Private VLAN feature on switching devices. |
| mypvlanMIBObjects | 1.3.6.1.4.1.171.10.97.2.44.1 | | | |
| mypvlanVlanObjects | 1.3.6.1.4.1.171.10.97.2.44.1.1 | | | |
| mypvlanVlanTable | 1.3.6.1.4.1.171.10.97.2.44.1.1.1 | | not-accessible | A table containing Private VLAN information on the
VLANs which currently exist. |
| mypvlanVlanEntry | 1.3.6.1.4.1.171.10.97.2.44.1.1.1.1 | | not-accessible | A conceptual row containing the Private VLAN
information on the VLANs for a particular management
domain. |
| VLA mypvlanVlanIndex | 1.3.6.1.4.1.171.10.97.2.44.1.1.1.1.1 | VlanIndexOrZero | read-only | Indicated the VLAN id. |
| PRI mypvlanVlanPrivateVlanType | 1.3.6.1.4.1.171.10.97.2.44.1.1.1.1.2 | PrivateVlanType | read-create | Indicated the VLAN type as defined for Private VLAN
feature. |
| VLA mypvlanVlanAssociatedPrimaryVlan | 1.3.6.1.4.1.171.10.97.2.44.1.1.1.1.3 | VlanIndexOrZero | read-create | The VLAN ID of The associated primary VLAN used for
the Private VLAN feature if pvlanVlanPrivateVlanType
has the value of isolated(3), community(4). If pvlanVlanPrivateVlanType
has the value of normal(1) or primary(2), then this
object has the value of 0.
The value should be 0 when configuring 'private-vlan type'.
When configuring 'private-vlan association',the value of 0 means deleting the association, otherwise means
configure association on this primary vlan. |
| T/F mypvlanIfAssociatedPrimaryVlan | 1.3.6.1.4.1.171.10.97.2.44.1.1.1.1.4 | TruthValue | read-create | It indicate if the vlan assiociate with primary vlan when get the mib, and
indicate if setting the assiociate with primary vlan when set the mib, 0 means
configure 'private-vlan type', not 0 means configure 'private-vlan association'. |
| mypvlanPortObjects | 1.3.6.1.4.1.171.10.97.2.44.1.2 | | | |
| mypvlanPrivatePortTable | 1.3.6.1.4.1.171.10.97.2.44.1.2.1 | | not-accessible | A table containing information of the configuration of
VLAN on the host ports of the device. |
| mypvlanPrivatePortEntry | 1.3.6.1.4.1.171.10.97.2.44.1.2.1.1 | | not-accessible | A conceptual row containing information of the
configuration of VLAN for each host port.
When pvlanPrivatePortSecondaryVlan and pvlanPrivatePortPrimaryVlan
are both zero, it means deleting the configuration on the port, when they
are both nonzero, it means configuring the host port,
otherwise are invalid input. This table is valid only for host port. |
| VLA mypvlanPrivatePortPrimaryVlan | 1.3.6.1.4.1.171.10.97.2.44.1.2.1.1.1 | VlanIndexOrZero | read-write | The VLAN ID of the primary VLAN configured on this
private port. If mypvlanPrivatePortPrimaryVlan and mypvlanPrivatePortSecondaryVlan
are both zero when set the mib, it means delete the private-vlan configuration on the host port. |
| VLA mypvlanPrivatePortSecondaryVlan | 1.3.6.1.4.1.171.10.97.2.44.1.2.1.1.2 | VlanIndexOrZero | read-write | The VLAN ID of the secondary VLAN configured on this
private port.If mypvlanPrivatePortPrimaryVlan and mypvlanPrivatePortSecondaryVlan
are both zero when set the mib, it means delete the private-vlan configuration on the host port. |
| mypvlanPromPortTable | 1.3.6.1.4.1.171.10.97.2.44.1.2.2 | | not-accessible | A table containing information of secondary VLAN to
primary VLAN remapping on ports of the device. |
| mypvlanPromPortEntry | 1.3.6.1.4.1.171.10.97.2.44.1.2.2.1 | | not-accessible | A conceptual row containing information of secondary
VLAN to primary VLAN remapping for each port. An entry
is created by the managed system for each interface
which can be configured as a promiscuous port for
Private VLAN feature.This table is valid only for promiscuous port. |
| VLA mypvlanPrivatePortPrimaryVlanId | 1.3.6.1.4.1.171.10.97.2.44.1.2.2.1.1 | VlanIndexOrZero | read-write | Primary Vlan Id configured on the promiscuous port, it is zero
when delete the remapping on the port. |
| OCT mypvlanPromPortSecondaryRemap | 1.3.6.1.4.1.171.10.97.2.44.1.2.2.1.2 | OCTET STRING | read-write | A string of octets containing one bit per VLAN in the
management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 0
through 7; the second octet to VLANs 8 through 15; etc.
The most significant bit of each octet corresponds to
the lowest value VlanIndexOrZero in that octet.
A bit can only be set to '1' when the bit is
corresponding to a VLAN of Private VLAN isolated,
community type which has already
been associated with a primary VLAN.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs. |
| OCT mypvlanPromPortSecondaryRemap2k | 1.3.6.1.4.1.171.10.97.2.44.1.2.2.1.3 | OCTET STRING | read-write | A string of octets containing one bit per VLAN for
VLANs with VlanIndexOrZero values of 1024 through 2047
in the management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 1024
through 1031; the second octet to VLANs 1032 through
1039; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndexOrZero in
that octet.
A bit can only be set to '1' when the bit is
corresponding to a VLAN of Private VLAN isolated or
community type which has already been associated with a
primary VLAN.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support
the range of VlanIndexOrZero up to 4095. |
| OCT mypvlanPromPortSecondaryRemap3k | 1.3.6.1.4.1.171.10.97.2.44.1.2.2.1.4 | OCTET STRING | read-write | A string of octets containing one bit per VLAN for
VLANs with VlanIndexOrZero values of 2048 through 3071
in the management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 2048
through 2055; the second octet to VLANs 2056 through
2063; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndexOrZero in
that octet.
A bit can only be set to '1' when the bit is
corresponding to a VLAN of Private VLAN isolated or
community type which has already been associated with a
primary VLAN.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support
the range of VlanIndexOrZero up to 4095. |
| OCT mypvlanPromPortSecondaryRemap4k | 1.3.6.1.4.1.171.10.97.2.44.1.2.2.1.5 | OCTET STRING | read-write | A string of octets containing one bit per VLAN for
VLANs with VlanIndexOrZero values of 3072 through 4095
in the management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 3072
through 3079; the second octet to VLANs 3080 through
3087; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndexOrZero in
that octet.
A bit can only be set to '1' when the bit is
corresponding to a VLAN of Private VLAN isolated or
community type which has already been associated with a
primary VLAN.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support
the range of VlanIndexOrZero up to 4095. |
| mypvlanPortModeTable | 1.3.6.1.4.1.171.10.97.2.44.1.2.3 | | not-accessible | A table containing information of the configuration of
port mode for the Private VLAN feature. |
| mypvlanPortModeEntry | 1.3.6.1.4.1.171.10.97.2.44.1.2.3.1 | | not-accessible | A conceptual row containing information of the
configuration of port mode on each port for the
Private VLAN feature. An entry of this table is
created by the managed system when the capability
to be a Private VLAN port is detected on an
interface. |
| INT mypvlanPortMode | 1.3.6.1.4.1.171.10.97.2.44.1.2.3.1.1 | INTEGER | read-write | The Private VLAN port mode on this port.
nonPrivateVlan(1) -- this port is configured to be a
non-Private-VLAN port.
host(2) -- this port is configured to be
a Private-VLAN host port, i.e., private
port.
promiscuous(3) -- this port is configured to be
a Private-VLAN promiscuous port. |
| mypvlanSVIObjects | 1.3.6.1.4.1.171.10.97.2.44.1.3 | | | |
| mypvlanSVIMappingTable | 1.3.6.1.4.1.171.10.97.2.44.1.3.1 | | not-accessible | A table containing the configuration of
primary VLAN SVI (Switch Virtual Interfaces)
mapping for the secondary VLANs for the Private
VLAN feature. |
| mypvlanSVIMappingEntry | 1.3.6.1.4.1.171.10.97.2.44.1.3.1.1 | | not-accessible | A conceptual row containing the Primary VLAN
SVI mapping configuration for the existing
secondary VLANs. An entry is created by the managed
system for each VLAN with corresponding VLAN's
pvlanVlanPrivateVlanType of isolated(3), community(4). |
| VLA mypvlanSVIMappingVlanIndex | 1.3.6.1.4.1.171.10.97.2.44.1.3.1.1.1 | VlanIndexOrZero | not-accessible | An index value that uniquely identifies the
Virtual LAN associated with this information. |
| VLA mypvlanSVIMappingPrimarySVI | 1.3.6.1.4.1.171.10.97.2.44.1.3.1.1.2 | VlanIndexOrZero | read-write | The Vlan ID of the primary VLAN SVI this secondary
VLAN is mapped to for the Private VLAN feature.
This object has the value of zero if this secondary
VLAN is not mapped to any primary VLAN SVI. |
| mypvlanMIBConformance | 1.3.6.1.4.1.171.10.97.2.44.2 | | | |
| mypvlanMIBCompliances | 1.3.6.1.4.1.171.10.97.2.44.2.1 | | | |
| mypvlanMIBCompliance | 1.3.6.1.4.1.171.10.97.2.44.2.1.1 | | | The compliance statement for Private VLAN feature
implementation. |
| mypvlanMIBGroups | 1.3.6.1.4.1.171.10.97.2.44.2.2 | | | |
| mypvlanVlanGroup | 1.3.6.1.4.1.171.10.97.2.44.2.2.1 | | | A collection of objects providing basic VLAN
configuration for Private VLAN feature. |
| mypvlanPrivatePortGroup | 1.3.6.1.4.1.171.10.97.2.44.2.2.2 | | | A collection of objects providing basic
private port configuration for Private VLAN
feature. |
| mypvlanPromPortGroup | 1.3.6.1.4.1.171.10.97.2.44.2.2.3 | | | A collection of objects providing basic
promiscuous port configuration for Private
VLAN feature. |
| mypvlanPortModeGroup | 1.3.6.1.4.1.171.10.97.2.44.2.2.4 | | | A collection of objects providing basic
port mode configuration for Private VLAN feature. |
| mypvlanSVIGroup | 1.3.6.1.4.1.171.10.97.2.44.2.2.5 | | | A collection of objects providing
svi mapping configuration for Private VLAN feature. |
