DLINKSW-VLAN-MIB :: dVlanPortIfTagAllowVlanLstSecond2K

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DLINKSW-VLAN-MIB › dVlanPortIfTagAllowVlanLstSecond2K

dVlanPortIfTagAllowVlanLstSecond2K

Module: DLINKSW-VLAN-MIB

OID (symbolic): DLINKSW-VLAN-MIB::dVlanPortIfTagAllowVlanLstSecond2K

OID (numeric): 1.3.6.1.4.1.171.26.21.1.4.1.6

Node type: OBJECT-TYPE

Type: Dlink2kVlanList

Access: read-write

Description: This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 2049 to 4094.

If the bit is set to '1', then the interface is allowed to be the VLAN's tagged member.

Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'trunk'.

What is dVlanPortIfTagAllowVlanLstSecond2K?

This value is a bitmap, one bit per VLAN, covering VLAN IDs 2049 through 4094, that specifies which of those VLANs a hybrid or trunk port is permitted to carry as a tagged member. It complements the corresponding first-2K list so the full VLAN ID range can be controlled for tagged traffic on the port. For example, setting the bit for VLAN 3000 allows the port to tag and accept frames for that higher-numbered VLAN.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.26.21.1.4.1.6
snmpwalk -v2c -c public <target> DLINKSW-VLAN-MIB::dVlanPortIfTagAllowVlanLstSecond2K

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.26.21.1.4.1.6.1
snmpget -v2c -c public <target> DLINKSW-VLAN-MIB::dVlanPortIfTagAllowVlanLstSecond2K.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.26.21.1.4.1.6.1 s <value>

Start monitoring D-Link managed switch (VLAN/MAC-based VLAN extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLINKSW-VLAN-MIB::dVlanPortIfTagAllowVlanLstSecond2K OID value, configure state conditions and alerts, and monitor any D-Link managed switch (VLAN/MAC-based VLAN extensions) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.26dlinkIndustrialCommonDLINK-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.26.21dlinkSwVlanMIBDLINKSW-VLAN-MIB
1.3.6.1.4.1.171.26.21.1dVlanMIBObjectsDLINKSW-VLAN-MIB
1.3.6.1.4.1.171.26.21.1.4dVlanPortIfCtrlTableDLINKSW-VLAN-MIB
1.3.6.1.4.1.171.26.21.1.4.1dVlanPortIfCtrlEntryDLINKSW-VLAN-MIB
1.3.6.1.4.1.171.26.21.1.4.1.6dVlanPortIfTagAllowVlanLstSecond2KDLINKSW-VLAN-MIB