ME1200-VLAN-MIB

All MIBs › ME1200-VLAN-MIB

Organization: Cisco Systems, Inc

Last Updated: 2015-01-16

Category: VLAN Management

Description: Manages VLAN configuration and port membership on Cisco ME1200 Metro Ethernet switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ME1200-VLAN-MIB?

This is a Cisco ME1200 Metro Ethernet access switch MIB for VLAN configuration and port membership management, in the carrier Ethernet Layer 2 switching technology area. It exposes VLAN ID range capabilities, global VLAN configuration (custom S-port EtherType, access-VLAN bitmaps), and a VLAN name table. Monitoring focus is configuration/software state: me1200VlanConfigGlobalsNameTable lets an operator confirm the name assigned to each me1200VlanConfigGlobalsNameVlanId, and the access-VLAN bitmap objects reveal which of the 4096 possible VLAN IDs are designated as access VLANs on the switch. It implements IEEE 802.1Q VLAN tagging concepts as a private vendor MIB layered on top of the standard Q-BRIDGE-MIB. It is deployed on Cisco ME1200 metro Ethernet access switches segmenting customer/service traffic by VLAN at the network edge. Network engineers evaluating or troubleshooting this functionality can download the ME1200-VLAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ME1200-VLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco ME1200 Metro Ethernet access switch

Monitoring Examples

An operator would poll me1200VlanConfigGlobalsNameTable (indexed by me1200VlanConfigGlobalsNameVlanId) to verify a newly created VLAN's me1200VlanConfigGlobalsNameName matches naming conventions. They would also check the me1200VlanConfigGlobalsMainAccessVlans0To1K/1KTo2K/etc. bitmaps to confirm a given VLAN ID is correctly flagged as an access VLAN rather than a trunk-only VLAN.

What Can Be Monitored

VLAN ID range supported
VLAN name assignments
access VLAN bitmap per range
custom S-port EtherType configuration
FID (filtering ID) count

Imported Objects

From CISCOME1200-MIB

me1200SwitchMgmt

OBJECT-IDENTITY

From ME1200-TC

ME1200DisplayString
ME1200EtherType
ME1200InterfaceIndex
ME1200PortListStackable
ME1200RowEditorState
ME1200Unsigned16
ME1200Vlan
ME1200VlanListQuarter

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
me1200VlanMIB	1.3.6.1.4.1.9.9.815.1.13			Private MIB for VLAN.
me1200VlanMIBObjects	1.3.6.1.4.1.9.9.815.1.13.1
me1200VlanCapabilities	1.3.6.1.4.1.9.9.815.1.13.1.1
ME1 me1200VlanCapabilitiesVlanIdMin	1.3.6.1.4.1.9.9.815.1.13.1.1.1	ME1200Vlan	read-only	The minimum VLAN ID that can be configured on the device.
ME1 me1200VlanCapabilitiesVlanIdMax	1.3.6.1.4.1.9.9.815.1.13.1.1.2	ME1200Vlan	read-only	The maximum VLAN ID that can be configured on the device.
ME1 me1200VlanCapabilitiesFidCnt	1.3.6.1.4.1.9.9.815.1.13.1.1.3	ME1200Unsigned16	read-only	The number of Shared VLAN Learning (SVL) Filter IDs (FIDs) supported by this device. 0 if SVL is not supported.
me1200VlanConfig	1.3.6.1.4.1.9.9.815.1.13.1.2
me1200VlanConfigGlobals	1.3.6.1.4.1.9.9.815.1.13.1.2.1
me1200VlanConfigGlobalsMain	1.3.6.1.4.1.9.9.815.1.13.1.2.1.1
ME1 me1200VlanConfigGlobalsMainCustomSPortEtherType	1.3.6.1.4.1.9.9.815.1.13.1.2.1.1.1	ME1200EtherType	read-write	TPID (EtherType) for ports marked as Custom-S tag aware.
ME1 me1200VlanConfigGlobalsMainAccessVlans0To1K	1.3.6.1.4.1.9.9.815.1.13.1.2.1.1.2	ME1200VlanListQuarter	read-write	First quarter of bit-array indicating the enabled access VLANs.
ME1 me1200VlanConfigGlobalsMainAccessVlans1KTo2K	1.3.6.1.4.1.9.9.815.1.13.1.2.1.1.3	ME1200VlanListQuarter	read-write	Second quarter of bit-array indicating the enabled access VLANs.
ME1 me1200VlanConfigGlobalsMainAccessVlans2KTo3K	1.3.6.1.4.1.9.9.815.1.13.1.2.1.1.4	ME1200VlanListQuarter	read-write	Third quarter of bit-array indicating the enabled access VLANs.
ME1 me1200VlanConfigGlobalsMainAccessVlans3KTo4K	1.3.6.1.4.1.9.9.815.1.13.1.2.1.1.5	ME1200VlanListQuarter	read-write	Last quarter of bit-array indicating the enabled access VLANs.
me1200VlanConfigGlobalsNameTable	1.3.6.1.4.1.9.9.815.1.13.1.2.1.2		not-accessible	Table of VLAN names.
me1200VlanConfigGlobalsNameEntry	1.3.6.1.4.1.9.9.815.1.13.1.2.1.2.1		not-accessible	Each row contains the name of a given VLAN.
ME1 me1200VlanConfigGlobalsNameVlanId	1.3.6.1.4.1.9.9.815.1.13.1.2.1.2.1.1	ME1200Vlan	not-accessible	VLAN ID. Valid range is 1 - 4095.
STR me1200VlanConfigGlobalsNameName	1.3.6.1.4.1.9.9.815.1.13.1.2.1.2.1.2	ME1200DisplayString	read-write	VLAN Name. Default for VLAN 1 is 'default'. Default for any other VLAN is 'VLANxxxx', where 'xxxx' is a decimal representation of the VLAN ID with leading zeroes.
me1200VlanConfigInterfaces	1.3.6.1.4.1.9.9.815.1.13.1.2.2
me1200VlanConfigInterfaceTable	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1		not-accessible	Table of per-port configuration.
me1200VlanConfigInterfaceEntry	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1		not-accessible	Each row contains the VLAN configuration for a port interface.
NUM me1200VlanConfigInterfaceIfIndex	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.1	ME1200InterfaceIndex	not-accessible	Logical interface index.
ME1 me1200VlanConfigInterfaceMode	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.2	ME1200VlanPortMode	read-write	VLAN mode of the port.
ME1 me1200VlanConfigInterfaceAccessVlan	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.3	ME1200Vlan	read-write	The port VLAN ID the port will be assigned when Mode is Access.
ME1 me1200VlanConfigInterfaceTrunkNativeVlan	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.4	ME1200Vlan	read-write	The port VLAN ID the port will be assigned when Mode is trunk.
T/F me1200VlanConfigInterfaceTrunkTagNativeVlan	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.5	TruthValue	read-write	Controls whether frames classified to TrunkNativeVlan get tagged on egress. Used when Mode is trunk.
ME1 me1200VlanConfigInterfaceTrunkVlans0KTo1K	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.6	ME1200VlanListQuarter	read-write	First quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is trunk.
ME1 me1200VlanConfigInterfaceTrunkVlans1KTo2K	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.7	ME1200VlanListQuarter	read-write	Second quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is trunk.
ME1 me1200VlanConfigInterfaceTrunkVlans2KTo3K	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.8	ME1200VlanListQuarter	read-write	Third quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is trunk.
ME1 me1200VlanConfigInterfaceTrunkVlans3KTo4K	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.9	ME1200VlanListQuarter	read-write	Last quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is trunk.
ME1 me1200VlanConfigInterfaceHybridNativeVlan	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.10	ME1200Vlan	read-write	The port VLAN ID the port will be assigned when Mode is hybrid.
ME1 me1200VlanConfigInterfaceHybridPortType	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.11	ME1200VlanPortType	read-write	Controls awareness and whether it reacts to C-tags, S-tags, Custom-S-tags. Used when Mode is hybrid.
T/F me1200VlanConfigInterfaceHybridIngressFiltering	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.12	TruthValue	read-write	Controls whether frames classified to a certain VLAN ID get discarded (true) or not (false) if the port is not member of the VLAN ID. Used when Mode is hybrid.
ME1 me1200VlanConfigInterfaceHybridIngressAcceptance	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.13	ME1200VlanIngressAcceptance	read-write	Controls whether frames are accepted on ingress depending on VLAN tag in frame. Used when Mode is hybrid.
ME1 me1200VlanConfigInterfaceHybridEgressTagging	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.14	ME1200VlanEgressTagging	read-write	Controls tagging of frames on egress. tagThis(1) is not allowed. Used when Mode is hybrid.
ME1 me1200VlanConfigInterfaceHybridVlans0KTo1K	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.15	ME1200VlanListQuarter	read-write	First quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid.
ME1 me1200VlanConfigInterfaceHybridVlans1KTo2K	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.16	ME1200VlanListQuarter	read-write	Second quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid.
ME1 me1200VlanConfigInterfaceHybridVlans2KTo3K	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.17	ME1200VlanListQuarter	read-write	Third quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid.
ME1 me1200VlanConfigInterfaceHybridVlans3KTo4K	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.18	ME1200VlanListQuarter	read-write	Last quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid.
ME1 me1200VlanConfigInterfaceForbiddenVlans0KTo1K	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.19	ME1200VlanListQuarter	read-write	First quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes.
ME1 me1200VlanConfigInterfaceForbiddenVlans1KTo2K	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.20	ME1200VlanListQuarter	read-write	Second quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes.
ME1 me1200VlanConfigInterfaceForbiddenVlans2KTo3K	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.21	ME1200VlanListQuarter	read-write	Third quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes.
ME1 me1200VlanConfigInterfaceForbiddenVlans3KTo4K	1.3.6.1.4.1.9.9.815.1.13.1.2.2.1.1.22	ME1200VlanListQuarter	read-write	Last quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes.
me1200VlanConfigInterfacesSvlTable	1.3.6.1.4.1.9.9.815.1.13.1.2.2.2		not-accessible	Shared VLAN Learning (SVL) allows for having one or more VLAN IDs map to the same Filter ID (FID). For a given set of VLANs, if an individual MAC address is learned in one VLAN, that learned information is used in forwarding decisions taken for that address relative to all other VLANs in the given set. fidCnt, which can be found in the capabilities section, indicates the number of FIDs available on this platform. The feature is not available if this number is 0.
me1200VlanConfigInterfacesSvlEntry	1.3.6.1.4.1.9.9.815.1.13.1.2.2.2.1		not-accessible	The table is indexed by VLAN ID
ME1 me1200VlanConfigInterfacesSvlVlanId	1.3.6.1.4.1.9.9.815.1.13.1.2.2.2.1.1	ME1200Vlan	not-accessible	VLAN ID. Valid range is 1 - 4095.
ME1 me1200VlanConfigInterfacesSvlFilterId	1.3.6.1.4.1.9.9.815.1.13.1.2.2.2.1.2	ME1200Unsigned16	read-write	Filter ID (FID) used in Shared VLAN Learning. Zero or more VLANs may map into the same FID.
ME1 me1200VlanConfigInterfacesSvlAction	1.3.6.1.4.1.9.9.815.1.13.1.2.2.2.1.100	ME1200RowEditorState	read-write	Action
me1200VlanConfigInterfacesSvlTableRowEditor	1.3.6.1.4.1.9.9.815.1.13.1.2.2.3
ME1 me1200VlanConfigInterfacesSvlTableRowEditorVlanId	1.3.6.1.4.1.9.9.815.1.13.1.2.2.3.1	ME1200Vlan	read-write	VLAN ID. Valid range is 1 - 4095.
ME1 me1200VlanConfigInterfacesSvlTableRowEditorFilterId	1.3.6.1.4.1.9.9.815.1.13.1.2.2.3.2	ME1200Unsigned16	read-write	Filter ID (FID) used in Shared VLAN Learning. Zero or more VLANs may map into the same FID.
ME1 me1200VlanConfigInterfacesSvlTableRowEditorAction	1.3.6.1.4.1.9.9.815.1.13.1.2.2.3.100	ME1200RowEditorState	read-write	Action
me1200VlanStatus	1.3.6.1.4.1.9.9.815.1.13.1.3
me1200VlanStatusInterfaces	1.3.6.1.4.1.9.9.815.1.13.1.3.1
me1200VlanStatusInterfaceTable	1.3.6.1.4.1.9.9.815.1.13.1.3.1.1		not-accessible	Table of per-interface (port) status.
me1200VlanStatusInterfaceEntry	1.3.6.1.4.1.9.9.815.1.13.1.3.1.1.1		not-accessible	Each row contains the VLAN configuration for a port interface for a given VLAN user.
NUM me1200VlanStatusInterfaceIfIndex	1.3.6.1.4.1.9.9.815.1.13.1.3.1.1.1.1	ME1200InterfaceIndex	not-accessible	Logical interface index.
ME1 me1200VlanStatusInterfaceVlanUser	1.3.6.1.4.1.9.9.815.1.13.1.3.1.1.1.2	ME1200VlanUserType	not-accessible	VLAN user.
ME1 me1200VlanStatusInterfacePvid	1.3.6.1.4.1.9.9.815.1.13.1.3.1.1.1.3	ME1200Vlan	read-only	Port VLAN ID set by this user.
ME1 me1200VlanStatusInterfaceUvid	1.3.6.1.4.1.9.9.815.1.13.1.3.1.1.1.4	ME1200Vlan	read-only	Untagged VLAN ID set by a user. This may only be populated by non-admin users.
ME1 me1200VlanStatusInterfacePortType	1.3.6.1.4.1.9.9.815.1.13.1.3.1.1.1.5	ME1200VlanPortType	read-only	VLAN Awareness and tag reaction set by this user.
T/F me1200VlanStatusInterfaceIngressFiltering	1.3.6.1.4.1.9.9.815.1.13.1.3.1.1.1.6	TruthValue	read-only	Ingress filtering enabled or disabled by this user.
ME1 me1200VlanStatusInterfaceIngressAcceptance	1.3.6.1.4.1.9.9.815.1.13.1.3.1.1.1.7	ME1200VlanIngressAcceptance	read-only	VLAN tagging accepted upon ingress configured by this user.
ME1 me1200VlanStatusInterfaceEgressTagging	1.3.6.1.4.1.9.9.815.1.13.1.3.1.1.1.8	ME1200VlanEgressTagging	read-only	Egress tagging configured by this user.
me1200VlanStatusMemberships	1.3.6.1.4.1.9.9.815.1.13.1.3.2
me1200VlanStatusMembershipVlanTable	1.3.6.1.4.1.9.9.815.1.13.1.3.2.1		not-accessible	Table of per-VLAN, per-VLAN user port memberships.
me1200VlanStatusMembershipVlanEntry	1.3.6.1.4.1.9.9.815.1.13.1.3.2.1.1		not-accessible	Each row contains a port list of VLAN memberships for a given VLAN and VLAN user.The table is sparsely populated, so if a VLAN user doesn't contribute, the row is non-existent.
ME1 me1200VlanStatusMembershipVlanVlanId	1.3.6.1.4.1.9.9.815.1.13.1.3.2.1.1.1	ME1200Vlan	not-accessible	VLAN ID. Valid range is 1 - 4095.
ME1 me1200VlanStatusMembershipVlanVlanUser	1.3.6.1.4.1.9.9.815.1.13.1.3.2.1.1.2	ME1200VlanUserType	not-accessible	VLAN user.
ME1 me1200VlanStatusMembershipVlanPortList	1.3.6.1.4.1.9.9.815.1.13.1.3.2.1.1.3	ME1200PortListStackable	read-only	Port list.
me1200VlanMIBConformance	1.3.6.1.4.1.9.9.815.1.13.3
me1200VlanMIBCompliances	1.3.6.1.4.1.9.9.815.1.13.3.1
me1200VlanMIBCompliance	1.3.6.1.4.1.9.9.815.1.13.3.1.1			The compliance statement for the implementation.
me1200VlanMIBGroups	1.3.6.1.4.1.9.9.815.1.13.3.2
me1200VlanCapabilitiesInfoGroup	1.3.6.1.4.1.9.9.815.1.13.3.2.1			A collection of objects suitable for bulk operations.
me1200VlanConfigGlobalsMainInfoGroup	1.3.6.1.4.1.9.9.815.1.13.3.2.2			A collection of objects suitable for bulk operations.
me1200VlanConfigGlobalsNameTableInfoGroup	1.3.6.1.4.1.9.9.815.1.13.3.2.3			A collection of objects suitable for bulk operations.
me1200VlanConfigInterfaceTableInfoGroup	1.3.6.1.4.1.9.9.815.1.13.3.2.4			A collection of objects suitable for bulk operations.
me1200VlanConfigInterfacesSvlTableInfoGroup	1.3.6.1.4.1.9.9.815.1.13.3.2.5			A collection of objects suitable for bulk operations.
me1200VlanConfigInterfacesSvlTableRowEditorInfoGroup	1.3.6.1.4.1.9.9.815.1.13.3.2.6			A collection of objects suitable for bulk operations.
me1200VlanStatusInterfaceTableInfoGroup	1.3.6.1.4.1.9.9.815.1.13.3.2.7			A collection of objects suitable for bulk operations.
me1200VlanStatusMembershipVlanTableInfoGroup	1.3.6.1.4.1.9.9.815.1.13.3.2.8			A collection of objects suitable for bulk operations.

RFC description

Provides VLAN configuration and management for Cisco ME1200 industrial switches including port membership and egress tagging.

Start monitoring Cisco ME1200 Metro Ethernet access switch (VLAN configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ME1200-VLAN-MIB

What Is ME1200-VLAN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description