TN-VLAN-MGMT-MIB

All MIBs › TN-VLAN-MGMT-MIB

Organization: Transition Networks, Inc.

Last Updated: 2014-05-01

Category: Switch and Bridge Management, Transition Networks Media Converters, VLAN Management

Description: Manages Transition Networks VLAN creation, port membership, and tagging configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TN-VLAN-MGMT-MIB?

TN-VLAN-MGMT-MIB is a Transition Networks, Inc. proprietary MIB (built on TRANSITION-SMI) managing VLAN and QoS configuration on TN platform products. Its objects cover a system-management-VLAN table (status, VLAN ID, member ports), a VLAN-extension table (management-port type, custom S-Tag), main-access-VLAN bitmaps spanning the full 0-4095 VLAN range, an IP-priority table (index, traffic class, remap), an IEEE-priority table (priority, remap), and an interface-priority table (default priority). As a configuration MIB it lets an administrator confirm management-VLAN assignment and CoS-to-queue remapping on a Transition Networks device. It is deployed on Transition Networks, Inc. equipment (VLAN/QoS management). Engineers can download the TN-VLAN-MGMT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TN-VLAN-MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Transition Networks, Inc. equipment (VLAN/QoS management)

Monitoring Examples

An administrator checks tnSysMgmtVLANId and tnSwIEEEPriorityRemap to confirm management-VLAN assignment and priority remapping on a Transition Networks device.

What Can Be Monitored

management-VLAN assignment and CoS/priority remapping

Imported Objects

From DOT3-OAM-MIB

EightOTwoOui

From ENTITY-MIB

entPhysicalIndex

OBJECT-TYPE

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero
ifIndex	OBJECT-TYPE

From Q-BRIDGE-MIB

PortList
VlanIndex

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From TRANSITION-SMI

tnProducts

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
tnVlanQoSMgmtMIB	1.3.6.1.4.1.868.2.5.4			The mib module for managing VLAN and QoS in TN platform products.
tnVlanQoSMgmtNotifications	1.3.6.1.4.1.868.2.5.4.0
NTF tnIfSourceAddrChangeEvt	1.3.6.1.4.1.868.2.5.4.0.1			A tnIfSourceAddrChangeEvt event is sent when the tnIfSourceAddrLock is set to 'true', the ionIfSourceAddrLockAction is set to 'discardAndNotify' or 'all' and there is an intrusion/SA change on this port.
tnVlanQoSMgmtObjects	1.3.6.1.4.1.868.2.5.4.1
tnSysVlanMgmt	1.3.6.1.4.1.868.2.5.4.1.1
tnSysManagmentVLANTable	1.3.6.1.4.1.868.2.5.4.1.1.1		not-accessible	Management VLAN configuration table.
tnSysManagmentVLANEntry	1.3.6.1.4.1.868.2.5.4.1.1.1.1		not-accessible	Each entry represents the management VLAN entry on a device.
INT tnSysMgmtVLANStatus	1.3.6.1.4.1.868.2.5.4.1.1.1.1.1	INTEGER	read-write	The device if management VLAN capable, can enable the secure channel for all its management traffic by setting this variable to enabled(1).
INT tnSysMgmtVLANId	1.3.6.1.4.1.868.2.5.4.1.1.1.1.2	INTEGER	read-write	The VLAN id, that this device will use for its management traffic. All Management frames to this device when 'tnSysManagmentVLANStatus' is set to 'enabled(1)' must be tagged with this VLAN id and all management frames from this device will be tagged with this VLAN id.
BIT tnSysMgmtMemberPorts	1.3.6.1.4.1.868.2.5.4.1.1.1.1.3	Bits	read-write	The ports on this device which are members of this Management VLAN. This is for security, some ports can be made not a member, which blocks all management access from this port. Each bit in this variable represents the logical port number local to the device.
tnSysVLANExtTable	1.3.6.1.4.1.868.2.5.4.1.1.2		not-accessible	System VLAN external configuration table.
tnSysVLANExtEntry	1.3.6.1.4.1.868.2.5.4.1.1.2.1		not-accessible	Each entry represents the VLAN config on a device.
INT tnSysVlanExtMgmtPortType	1.3.6.1.4.1.868.2.5.4.1.1.2.1.1	INTEGER	read-write	This mib variable is applicable for products that have a out of band management port. This determines the Port type for all management traffic.It can be one of the following types: Unaware, C-port, S-port, or S-custom-port where: - Unaware: The management traffic is untagged or not management vlan. - C-port: The management vlan is a C-Vlan and TPID 0x8100 is used for out of band management traffic. - S-port: The management vlan is a S-Vlan and TPID 0x88a8 is used for out of band management traffic. - S-custom-port: The management vlan is a S-Vlan, which use a custom TPID defined in tnSysVLANExtCustomSTag.
OCT tnSysVLANExtCustomSTag	1.3.6.1.4.1.868.2.5.4.1.1.2.1.2	OCTET STRING	read-write	This field specifies the Ether type used for Custom S-ports. This is a global setting and is applicable for all Custom S-ports. This field is used when TPID other than 0x8100 and 0x88a8 is needed for S-Tags.
TNV tnVlanConfigGlobalsMainAccessVlans0To1K	1.3.6.1.4.1.868.2.5.4.1.1.2.1.3	TNVlanListQuarter	read-write	First quarter of bit-array indicating the enabled access VLANs.
TNV tnVlanConfigGlobalsMainAccessVlans1KTo2K	1.3.6.1.4.1.868.2.5.4.1.1.2.1.4	TNVlanListQuarter	read-write	Second quarter of bit-array indicating the enabled access VLANs.
TNV tnVlanConfigGlobalsMainAccessVlans2KTo3K	1.3.6.1.4.1.868.2.5.4.1.1.2.1.5	TNVlanListQuarter	read-write	Third quarter of bit-array indicating the enabled access VLANs.
TNV tnVlanConfigGlobalsMainAccessVlans3KTo4K	1.3.6.1.4.1.868.2.5.4.1.1.2.1.6	TNVlanListQuarter	read-write	Last quarter of bit-array indicating the enabled access VLANs.
tnDevSysPriorityMgmt	1.3.6.1.4.1.868.2.5.4.1.2
tnSwIPPrioTable	1.3.6.1.4.1.868.2.5.4.1.2.1		not-accessible	IP Traffic class table.
tnSwIPPrioEntry	1.3.6.1.4.1.868.2.5.4.1.2.1.1		not-accessible	Each entry represents the remapped value for each traffic class.
INT tnSwIPPrioIndex	1.3.6.1.4.1.868.2.5.4.1.2.1.1.1	INTEGER	read-only	The IP traffic class remap table index. The indexing is for a bridge entity
INT tnSwIPPrioTC	1.3.6.1.4.1.868.2.5.4.1.2.1.1.2	INTEGER	read-only	The IP traffic class value.
INT tnSwIPPrioRemap	1.3.6.1.4.1.868.2.5.4.1.2.1.1.3	INTEGER	read-write	The frames with IP traffic class set, will be remapped to the listed priority queues.
tnSwIEEEPrioTable	1.3.6.1.4.1.868.2.5.4.1.2.2		not-accessible	IEEE priority remapping table.
tnSwIEEEPrioEntry	1.3.6.1.4.1.868.2.5.4.1.2.2.1		not-accessible	Each entry represents the remapped value for each priority class.
INT tnSwIEEEPriority	1.3.6.1.4.1.868.2.5.4.1.2.2.1.1	INTEGER	read-only	The IEEE tag priority bits in the frame.
INT tnSwIEEEPriorityRemap	1.3.6.1.4.1.868.2.5.4.1.2.2.1.2	INTEGER	read-write	The frames with IEEE priority bits set, will be mapped to the listed priority queues.
tnInterfaceQoSMgmt	1.3.6.1.4.1.868.2.5.4.1.3
tnIfPriorityTable	1.3.6.1.4.1.868.2.5.4.1.3.1		not-accessible	This table has entries for interfaces which are capable of Priority management.
tnIfPriorityEntry	1.3.6.1.4.1.868.2.5.4.1.3.1.1		not-accessible	A entry in the table represents Priority configuration.
INT tnIfDefaultPriority	1.3.6.1.4.1.868.2.5.4.1.3.1.1.1	INTEGER	read-write	The default priority for frames ingressing this port, if it doesnt have any IEEE 802.3ac tag or any IP TOS/Diffserv traffic class fields.
T/F tnIfUseIEEEPriority	1.3.6.1.4.1.868.2.5.4.1.3.1.1.2	TruthValue	read-write	If the frame is IEEE tagged, and this mib variable is set to 'true', the 802.1p bits are used as the frames priority.
T/F tnIfUseIPPriority	1.3.6.1.4.1.868.2.5.4.1.3.1.1.3	TruthValue	read-write	If the frame has IP TOS/Diffserv traffic class fields, and this mib variable is set to 'true'. The traffic class fields will be used as the frame's priority.
INT tnIfUseIPOrIEEEPriority	1.3.6.1.4.1.868.2.5.4.1.3.1.1.4	INTEGER	read-write	If the frame has IP TOS/Diffserv traffic class fields, and IEEE 802.3ac tagged, then this mib variable decides which one is to be considered as the frame's priority.
T/F tnIfSrcMACPriorityRemap	1.3.6.1.4.1.868.2.5.4.1.3.1.1.5	TruthValue	read-write	When set to true(1), a frame's Source MAC address decides the priority of the frame. The new priority value is assigned based on the priority assigned to that MAC address in the MAC forwarding database.
T/F tnIfDstMACPriorityRemap	1.3.6.1.4.1.868.2.5.4.1.3.1.1.6	TruthValue	read-write	When set to true(1), a frame's Destination MAC address decides the priority of the frame. The new priority value is assigned based on the priority assigned to that MAC address in the MAC forwarding database.
T/F tnIfVIDPriorityRemap	1.3.6.1.4.1.868.2.5.4.1.3.1.1.7	TruthValue	read-write	When set to true(1), a frame's VLAN id decides the priority of the frame. The new priority value is assigned based on the priority assigend to that VLAN id in the VLAN database.
tnIfPriorityRemapTable	1.3.6.1.4.1.868.2.5.4.1.3.2		not-accessible	This table has entries for each interface's IEEE priority remapping.
tnIfPriorityRemapEntry	1.3.6.1.4.1.868.2.5.4.1.3.2.1		not-accessible	A entry in the table represents Priority remapping for an interface.
INT tnIfUserPriority	1.3.6.1.4.1.868.2.5.4.1.3.2.1.1	INTEGER	read-only	The priority found in the frames ingressing this interface. Frames which are untagged take up the interface's priority.
INT tnIfRemappedPriority	1.3.6.1.4.1.868.2.5.4.1.3.2.1.2	INTEGER	read-write	The frame's priority is remapped to this new priority value. Frames that egress tagged will have the remapped priority.
tnInterfaceVlanMgmt	1.3.6.1.4.1.868.2.5.4.1.4
tnIfVLANTable	1.3.6.1.4.1.868.2.5.4.1.4.1		not-accessible	This table has entries for interfaces which are VLAN capable.
tnIfVLANEntry	1.3.6.1.4.1.868.2.5.4.1.4.1.1		not-accessible	A entry in the table represents VLAN configuration on an interface.
INT tnIfDot1qState	1.3.6.1.4.1.868.2.5.4.1.4.1.1.1	INTEGER	read-write	The IEEE802.1Q status of this interface.
T/F tnIfDiscardTagged	1.3.6.1.4.1.868.2.5.4.1.4.1.1.2	TruthValue	read-write	This filters all tagged non-management frames ingressing this port. All untagged and priority tagged frames are processed as normal frames.
T/F tnIfDiscardUntagged	1.3.6.1.4.1.868.2.5.4.1.4.1.1.3	TruthValue	read-write	This filters all untagged and priority tagged non-management frames ingressing this port. All frames .1Q tagged frames are processed as normal frames.
INT tnIfDefaultVlanId	1.3.6.1.4.1.868.2.5.4.1.4.1.1.4	INTEGER	read-write	The interface's default Vlan id. This VLAN id is given to untagged frames on ingress into the device.
T/F tnIfForceDefaultVlanId	1.3.6.1.4.1.868.2.5.4.1.4.1.1.5	TruthValue	read-write	This forces all untagged and (802.1Q)tagged frames to take up the interface's ionIfDefaultVlanId.
tnIfVLANTagMgmtTable	1.3.6.1.4.1.868.2.5.4.1.4.2		not-accessible	This table has entries for interfaces which are VLAN capable.
tnIfVLANTagMgmtEntry	1.3.6.1.4.1.868.2.5.4.1.4.2.1		not-accessible	A entry in the table represents VLAN configuration on an interface.
INT tnIfFrameTagMode	1.3.6.1.4.1.868.2.5.4.1.4.2.1.1	INTEGER	read-write	The interface's taggin mode. The interface can be set as : network(1) - This is the normal network mode. It can take untagged and 802.3ac tagged frames. In this mode, 802.1q can be enabled on the interface. Frames with an ethertype of 0x8100 is considered as tagged. provider(2) - In provider mode, frames are considered provider tagged if it matches the 'ionIfProviderEtherType'. Frames which are ingress with a provider tag, are stripped of their provider tag on egressing this interface. If the frame's ethertype doesnt match the 'ionIfProviderEtherType' it is as untagged. customer(3) - The customer mode is a normal access port which is not 802.1Q aware.
INT tnIfProviderEtherType	1.3.6.1.4.1.868.2.5.4.1.4.2.1.2	INTEGER	read-write	This ether type is used when an interface is set to 'provider' mode. Frames are considered tagged only if the ether type matches this value.
INT tnIfNetworkModeTagging	1.3.6.1.4.1.868.2.5.4.1.4.2.1.3	INTEGER	read-write	This is available only when 'ionIfFrameTagMode' is set to 'network(1)' mode. In unmodified(1) - Frames are unmodified, the egress the same as they ingress this interface removeTag(2) - Tagged frames are stripped of their tag, and are transmitted untagged addTag(3) - Untagged frames get tagged when they egress this interface.
tnIfVLANTagMgmt2Table	1.3.6.1.4.1.868.2.5.4.1.4.3		not-accessible	This table has entries for interfaces which are VLAN capable.
tnIfVLANTagMgmt2Entry	1.3.6.1.4.1.868.2.5.4.1.4.3.1		not-accessible	A entry in the table represents VLAN configuration on an interface.
INT tnIfVLANTagMgmt2PortType	1.3.6.1.4.1.868.2.5.4.1.4.3.1.1	INTEGER	read-write	A Port can be one of the following types: Unaware, C-port, S-port, or S-custom-port where: - Unaware: all frames are classified to the Port VLAN ID and tags are not removed (default). - C-port: Customer port; with Customer tags (C-Tags), which use TPID 0x8100. - S-port: Service port; with Service tags (S-Tags), which use TPID 0x88A8 (IEEE 802.1ad). - S-custom-port: Custom Service port; with Service tags (S-Tags), which use a custom TPID assigned in tnSysVLANExtCustomSTag. For Customer tags and Service tags, both VLAN tags (tags with non-zero VID) and Priority tags (tags with VID = 0) are processed. The tag header is either retrieved from a tag in the incoming frame or from a default port-based tag header. The port-based tag header is configured in ieee8021QBridgePvid. For double-tagged frames, there is an option to use the inner tag instead of the outer tag. In addition to the tag header, the ingress port decides the number of VLAN tags to pop at egress. If the configured number of tags to pop is greater than the actual number of tags in the frame, the number is reduced to the actual number of tags in the frame.
INT tnIfVLANTagMgmt2TxTagType	1.3.6.1.4.1.868.2.5.4.1.4.3.1.2	INTEGER	read-write	Determines egress tagging on a port: - Untag_pvid - All frames with classified VLAN as the PVID egress as untagged frames. - Tag_all - All frames which do not have a tag with classified vlan are tagged on egress. An extra tag with ingress port PVID is added if the frames are already tagged. - Untag_all - All frames tagged with the classified vlan id are untagged on egress.
INT tnIfVLANTagMgmt2ConfigConflicts	1.3.6.1.4.1.868.2.5.4.1.4.3.1.3	INTEGER	read-only	Shows the status of Conflicts whether one exists or not. When a Volatile VLAN User requests to set VLAN membership or VLAN port configuration, the following conflicts can occur: - Functional Conflicts between features. - Conflicts due to hardware limitation. - Direct conflict between user modules.
INT tnVlanConfigInterfaceMode	1.3.6.1.4.1.868.2.5.4.1.4.3.1.4	INTEGER	read-write	Determines the underlying port mode. Access ports are only members of one VLAN, the AccessVlan. Trunk ports are by default members of all VLANs, which can be limited with TrunkVlans. Hybrid ports allow for changing all port VLAN parameters. As trunk ports, hybrid ports are by default members of all VLANs, which can be limited with HybridVlans.
TNV tnVlanConfigInterfaceAllowVlans0KTo1K	1.3.6.1.4.1.868.2.5.4.1.4.3.1.5	TNVlanListQuarter	read-write	First quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid.
TNV tnVlanConfigInterfaceAllowVlans1KTo2K	1.3.6.1.4.1.868.2.5.4.1.4.3.1.6	TNVlanListQuarter	read-write	Second quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid.
TNV tnVlanConfigInterfaceAllowVlans2KTo3K	1.3.6.1.4.1.868.2.5.4.1.4.3.1.7	TNVlanListQuarter	read-write	Third quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid.
TNV tnVlanConfigInterfaceAllowVlans3KTo4K	1.3.6.1.4.1.868.2.5.4.1.4.3.1.8	TNVlanListQuarter	read-write	Last quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid.
TNV tnVlanConfigInterfaceForbiddenVlans0KTo1K	1.3.6.1.4.1.868.2.5.4.1.4.3.1.9	TNVlanListQuarter	read-write	First quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes.
TNV tnVlanConfigInterfaceForbiddenVlans1KTo2K	1.3.6.1.4.1.868.2.5.4.1.4.3.1.10	TNVlanListQuarter	read-write	Second quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes.
TNV tnVlanConfigInterfaceForbiddenVlans2KTo3K	1.3.6.1.4.1.868.2.5.4.1.4.3.1.11	TNVlanListQuarter	read-write	Third quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes.
TNV tnVlanConfigInterfaceForbiddenVlans3KTo4K	1.3.6.1.4.1.868.2.5.4.1.4.3.1.12	TNVlanListQuarter	read-write	Last quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes.
tnVlanServiceMgmt	1.3.6.1.4.1.868.2.5.4.1.5
INT tnVlanServiceConnType	1.3.6.1.4.1.868.2.5.4.1.5.1	INTEGER	read-write	This defines the VLAN service type. The connection specified Port 1 and Port 2 configuration. customerProvider(1) : This sets the Port 1 to be customer facing port and Port 2 to be provider facing port. providerCustomer(2) : This sets the Port 1 to be provider facing port and Port 2 to be customer facing port.
INT tnVlanServiceVIDForTag	1.3.6.1.4.1.868.2.5.4.1.5.2	INTEGER	read-write	This Vlan id will be used when the service translation requires an extra tag to be added.
INT tnVlanServiceEtherTypeForTag	1.3.6.1.4.1.868.2.5.4.1.5.3	INTEGER	read-write	This Ethertype will be used when the service translation requires an extra tag to be added. Typical values are 0x8100 for IEEE 802.1Q tags, 0x88a8 for IEEE 802.1ad S-tags or other 2 byte private ethertype.
TNV tnVlanServiceTranslation	1.3.6.1.4.1.868.2.5.4.1.5.4	TnVlanServiceTranslationType	read-write	This determines the service or flow type between the two terminations. The translation type as the flow passes the termination points from Customer edge to provider edge are detailed below : Device +------------------------------+ ----> \| P \| \| P \| ----> ----> \| o \| \| o \| ----> <---- \| r \| \| r \| <---- <---- \| t \| \| t \| <---- \|(PE)\| \|(CE)\| +------------------------------+ noTranslation(1) :- The ingress flow might contain any kind of frames, untagged or single or double tagged. The egress flow will be exactly the same, no translation is done. untaggedUntagged(2) :- The traffic should be untagged, all tagged frames will be discarded. The traffic that egress the device contain the untagged flow without any modification. untaggedSingleTagged(3) :- At the CE the traffic should be untagged. At the PE the traffic will contain a single tag with the VID specified in tnVlanServiceVIDForTag. singleTaggedSingleTagged(4) :- The traffic should be single tagged on ingress and on egress with no translation. singleTaggedTranslation(5) :- The traffic should be single tagged on ingress and on egress. The only changes from the singleTaggedSingleTagged(4), there is a translation. The Vlan Id that came on ingress is translated to a different Vlan Id on egress. singleTaggedDoubleTagged(6) :- At the CE the traffic should be single tagged. At the PE the traffic will contain an extra tag with the VID specified in tnVlanServiceVIDForTag. doubleTaggedDoubleTagged(7) :- The traffic should be double tagged on ingress and on egress with no translation. doubleTaggedTranslation(8) :- The traffic should be double tagged on ingress and on egress. The only changes from the doubleTaggedDoubleTagged(7), there is a translation. The Vlan Id in outer tag that came on CE is translated to a different Vlan Id on PE. The inner tag remains intact. addProviderTag(9) :- This option adds an extra tag on the PE interface, no matter what kind of traffic at CE. This strips the outer tag for traffic from PE interface egressing the CE interface.
tnVlanDbMgmt	1.3.6.1.4.1.868.2.5.4.1.6
tnVLANDbTable	1.3.6.1.4.1.868.2.5.4.1.6.1		not-accessible	This table contains all VLAN entries for this bridge.
tnVLANDbEntry	1.3.6.1.4.1.868.2.5.4.1.6.1.1		not-accessible	A entry in the table represents a VLAN and the interfaces that are members of that VLAN.
VLA tnVlanDbVID	1.3.6.1.4.1.868.2.5.4.1.6.1.1.1	VlanIndex	read-only	The VLAN ID of the entry.
INT tnVlanDbFID	1.3.6.1.4.1.868.2.5.4.1.6.1.1.2	INTEGER	read-only	The Forwarding Database number for this VLAN.
INT tnVlanDbVIDPriOverride	1.3.6.1.4.1.868.2.5.4.1.6.1.1.3	INTEGER	read-create	Override Priority on frames assosicated with this VID.
INT tnVlanDbVIDPriority	1.3.6.1.4.1.868.2.5.4.1.6.1.1.4	INTEGER	read-create	Priority for frames assosicated with this VID.
INT tnVlanDbMemTagPort1	1.3.6.1.4.1.868.2.5.4.1.6.1.1.5	INTEGER	read-create	Membership and Egress Tagging on Logical Port 1. memEgressNoMode(1)- Port 1 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) - Port 1 is a member of this VLAN and frames that egress are untagged. memEgressTag(3) - Port 1 is a member of this VLAN and frames that egress are tagged. notMember(4) - Port 1 is not a member of this VLAN and frames that ingress with this VID are discarded. notApplicable(5) is returned if there is no valid port.
INT tnVlanDbMemTagPort2	1.3.6.1.4.1.868.2.5.4.1.6.1.1.6	INTEGER	read-create	Membership and Egress Tagging on Logical Port 2. memEgressNoMode(1)- Port 2 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) - Port 2 is a member of this VLAN and frames that egress are untagged. memEgressTag(3) - Port 2 is a member of this VLAN and frames that egress are tagged. notMember(4) - Port 2 is not a member of this VLAN and frames that ingress with this VID are discarded. notApplicable(5) is returned if there is no valid port.
INT tnVlanDbMemTagPort3	1.3.6.1.4.1.868.2.5.4.1.6.1.1.7	INTEGER	read-create	Membership and Egress Tagging on Logical Port 3. memEgressNoMode(1)- Port 3 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) - Port 3 is a member of this VLAN and frames that egress are untagged. memEgressTag(3) - Port 3 is a member of this VLAN and frames that egress are tagged. notMember(4) - Port 3 is not a member of this VLAN and frames that ingress with this VID are discarded. notApplicable(5) is returned if there is no valid port.
INT tnVlanDbMemTagPort4	1.3.6.1.4.1.868.2.5.4.1.6.1.1.8	INTEGER	read-create	Membership and Egress Tagging on Logical Port 4. memEgressNoMode(1)- Port 4 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) - Port 4 is a member of this VLAN and frames that egress are untagged. memEgressTag(3) - Port 4 is a member of this VLAN and frames that egress are tagged. notMember(4) - Port 4 is not a member of this VLAN and frames that ingress with this VID are discarded. notApplicable(5) is returned if there is no valid port.
INT tnVlanDbMemTagPort5	1.3.6.1.4.1.868.2.5.4.1.6.1.1.9	INTEGER	read-create	Membership and Egress Tagging on Logical Port 5. memEgressNoMode(1)- Port 5 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) - Port 5 is a member of this VLAN and frames that egress are untagged. memEgressTag(3) - Port 5 is a member of this VLAN and frames that egress are tagged. notMember(4) - Port 5 is not a member of this VLAN and frames that ingress with this VID are discarded. notApplicable(5) is returned if there is no valid port.
INT tnVlanDbMemTagPort6	1.3.6.1.4.1.868.2.5.4.1.6.1.1.10	INTEGER	read-create	Membership and Egress Tagging on Logical Port 6. memEgressNoMode(1)- Port 6 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) - Port 6 is a member of this VLAN and frames that egress are untagged. memEgressTag(3) - Port 6 is a member of this VLAN and frames that egress are tagged. notMember(4) - Port 6 is not a member of this VLAN and frames that ingress with this VID are discarded. notApplicable(5) is returned if there is no valid port.
INT tnVlanDbMemTagPort7	1.3.6.1.4.1.868.2.5.4.1.6.1.1.11	INTEGER	read-create	Membership and Egress Tagging on Logical Port 7. memEgressNoMode(1)- Port 7 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) - Port 7 is a member of this VLAN and frames that egress are untagged. memEgressTag(3) - Port 7 is a member of this VLAN and frames that egress are tagged. notMember(4) - Port 7 is not a member of this VLAN and frames that ingress with this VID are discarded. notApplicable(5) is returned if there is no valid port.
INT tnVlanDbMemTagPort8	1.3.6.1.4.1.868.2.5.4.1.6.1.1.12	INTEGER	read-create	Membership and Egress Tagging on Logical Port 8. memEgressNoMode(1)- Port 8 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) - Port 8 is a member of this VLAN and frames that egress are untagged. memEgressTag(3) - Port 8 is a member of this VLAN and frames that egress are tagged. notMember(4) - Port 8 is not a member of this VLAN and frames that ingress with this VID are discarded. notApplicable(5) is returned if there is no valid port.
INT tnVlanDbMemTagPort9	1.3.6.1.4.1.868.2.5.4.1.6.1.1.13	INTEGER	read-create	Membership and Egress Tagging on Logical Port 9. memEgressNoMode(1)- Port 9 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) - Port 9 is a member of this VLAN and frames that egress are untagged. memEgressTag(3) - Port 9 is a member of this VLAN and frames that egress are tagged. notMember(4) - Port 9 is not a member of this VLAN and frames that ingress with this VID are discarded. notApplicable(5) is returned if there is no valid port.
INT tnVlanDbMemTagPort10	1.3.6.1.4.1.868.2.5.4.1.6.1.1.14	INTEGER	read-create	Membership and Egress Tagging on Logical Port 10. memEgressNoMode(1)- Port 10 is a member of this VLAN and frames that egress are unmodified. memEgressNoTag(2) - Port 10 is a member of this VLAN and frames that egress are untagged. memEgressTag(3) - Port 10 is a member of this VLAN and frames that egress are tagged. notMember(4) - Port 10 is not a member of this VLAN and frames that ingress with this VID are discarded. notApplicable(5) is returned if there is no valid port.
ROW tnVlanDbRowStatus	1.3.6.1.4.1.868.2.5.4.1.6.1.1.15	RowStatus	read-create	The status of this VLAN entry in the VLAN database.
tnVLANDbFlush	1.3.6.1.4.1.868.2.5.4.1.6.2
INT tnVLANDbFlushOperation	1.3.6.1.4.1.868.2.5.4.1.6.2.1	INTEGER	read-write	Set this viarable to: flushAll(2): flush all VLAN entries except default VLAN 1. This variable can't be set if the 'tnVLANDbFlushOperationStatus' is 'inProgress(4)'. Do getting to this variable: If an operation is being processed, the operation being processed is returned. If no operation is being processed, 'doNothing(1)' is returned.
INT tnVLANDbFlushOperationStatus	1.3.6.1.4.1.868.2.5.4.1.6.2.2	INTEGER	read-only	The VLAN database flush operation status. unknown(1): no flush operation has been performed. success(2)/failure(3): the last flush operation is finished, success(2) indicates the last flush operation is successful. failure(3) indicates the last flush operation fails. inProgress(4): flush operation is in progress.
STR tnVLANDbFlushOperationFailureReason	1.3.6.1.4.1.868.2.5.4.1.6.2.3	DisplayString	read-only	Specifies the description of the cause of 'failure(3)' state of the object 'tnVLANDbFlushOperationStatus'. This object would be a null string if value of 'tnVLANDbFlushOperationStatus' is anything other than 'failure(3)'.
tnFIDDbMgmt	1.3.6.1.4.1.868.2.5.4.1.7
tnFIDDbTable	1.3.6.1.4.1.868.2.5.4.1.7.1		not-accessible	The forwarding/filtering address database for this device.
tnFIDDbEntry	1.3.6.1.4.1.868.2.5.4.1.7.1.1		not-accessible	Information about a particular MAC address.
INT tnFIDDbID	1.3.6.1.4.1.868.2.5.4.1.7.1.1.2	INTEGER	read-only	The Forwarding Database Number. This identifies the database.
MAC tnFIDDbMacAddress	1.3.6.1.4.1.868.2.5.4.1.7.1.1.3	MacAddress	read-only	The unicast or multicast MAC address that the device has forwarding information.
INT tnFIDDbConnPort	1.3.6.1.4.1.868.2.5.4.1.7.1.1.4	INTEGER	read-create	The index of the logical Port from which the device received the 'tnFIDDbMacAddress'.
INT tnFIDDbPriority	1.3.6.1.4.1.868.2.5.4.1.7.1.1.5	INTEGER	read-create	The priority of this MAC entry.
INT tnFIDDbEntryType	1.3.6.1.4.1.868.2.5.4.1.7.1.1.6	INTEGER	read-create	The Entry state of this unicast or multicast entry. The types represent : static(1) - A Valid entry that doesnot age. staticNRL(2) - A static entry that has no ingress rate limiting. staticPA(3) - A static entry that has priority override enabled. dynamic(4) - A valid entry with no special attributes which ages and finally removed from the database. A unicast entry can be static(1) or staticPA(3) but not staticNRL(2). For MAC address which are learned, the read-only value of dynamic(4) is returned.
ROW tnFIDDbEntryStatus	1.3.6.1.4.1.868.2.5.4.1.7.1.1.7	RowStatus	read-create	The status of this entry.
tnFIDDbFlush	1.3.6.1.4.1.868.2.5.4.1.7.2
INT tnFIDDbFlushFID	1.3.6.1.4.1.868.2.5.4.1.7.2.1	INTEGER	read-write	When 'tnFIDDbFlushOperation' is 'flushAllFID(3)' or 'flushAllDynamicFID(4)', the value(1..4094) of this viarable is used to specify the FID to be flushed. The value 0 of this virable means no FID is specified.
INT tnFIDDbFlushOperation	1.3.6.1.4.1.868.2.5.4.1.7.2.2	INTEGER	read-write	Set this viarable to: flushAll(2): flush all FID entries for all FIDs. flushAllDynamic(3): flush all FID dynamic entries for all FIDs. flushAllFID(4): flush all FID entries for one FID which is specified by ionFIDDbFlushFID. flushAllDynamicFID(5): flush all FID dynamic entries for one FID which is specified by ionFIDDbFlushFID. This variable can't be set if the 'ionFIDDbFlushOperationStatus' is 'inProgress(4)'. Do getting to this variable: If an operation is being processed, the operation being processed is returned. If no operation is being processed, 'doNothing(1)' is returned.
INT tnFIDDbFlushOperationStatus	1.3.6.1.4.1.868.2.5.4.1.7.2.3	INTEGER	read-only	The FID database flush operation status. unknown(1): no flush operation has been performed. success(2)/failure(3): the last flush operation is finished, success(2) indicates the last flush operation is successful. failure(3) indicates the last flush operation fails. inProgress(4): flush operation is in progress.
STR tnFIDDbFlushOperationFailureReason	1.3.6.1.4.1.868.2.5.4.1.7.2.4	DisplayString	read-only	Specifies the description of the cause of 'failure(3)' state of the object 'ionFIDDbFlushOperationStatus'. This object would be a null string if value of 'ionFIDDbFlushOperationStatus' is anything other than 'failure(3)'.
tnVclMgmt	1.3.6.1.4.1.868.2.5.4.1.8
tnVclMacBasedMgmt	1.3.6.1.4.1.868.2.5.4.1.8.1
tnVclMacBasedTable	1.3.6.1.4.1.868.2.5.4.1.8.1.1		not-accessible	This table is used to control MAC based Vlan functions.
tnVclMacBasedEntry	1.3.6.1.4.1.868.2.5.4.1.8.1.1.1		not-accessible	A entry in the table is used to control MAC based Vlan functions.
MAC tnVclMacBasedMacAddr	1.3.6.1.4.1.868.2.5.4.1.8.1.1.1.1	MacAddress	not-accessible	The MAC address is used for the MAC based VLAN function classification key.
VLA tnVclMacBasedVlanId	1.3.6.1.4.1.868.2.5.4.1.8.1.1.1.2	VlanIndex	read-create	The Vlan Id will be assigned to the incoming frame(if needed) which matches this specific MAC address and port member list.
POR tnVclMacBasedPortMember	1.3.6.1.4.1.868.2.5.4.1.8.1.1.1.3	PortList	read-create	The member port list of this specific MAC based Vlan match process takes place.
INT tnVclMacBasedUser	1.3.6.1.4.1.868.2.5.4.1.8.1.1.1.4	INTEGER	read-only	The creater of this entry. The MAC based VLAN entry is either created by user configuration(static), or by NAS dynamic creation(nas).
ROW tnVclMacBasedRowStatus	1.3.6.1.4.1.868.2.5.4.1.8.1.1.1.5	RowStatus	read-create	The status of this entry.
tnVclProtoBasedMgmt	1.3.6.1.4.1.868.2.5.4.1.8.2
tnVclProtoBasedGroupMapTable	1.3.6.1.4.1.868.2.5.4.1.8.2.1		not-accessible	This table is used to build a specific protocol group for VCL match process.
tnVclProtoBasedGroupMapEntry	1.3.6.1.4.1.868.2.5.4.1.8.2.1.1		not-accessible	A entry in this table is used to build a specific protocol group for VCL match process.
STR tnVclProtoBasedGroupMapName	1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.1	SnmpAdminString	not-accessible	The locally arbitrary, but unique identifier associated with this TnVclProtoBasedGroupMapEntry.
INT tnVclProtoBasedGroupMapProtocol	1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.2	INTEGER	read-create	Frame Type can have one of the following values: 1. Ethernet 2. SNAP 3. LLC
INT tnVclProtoBasedGroupMapEtherTypeVal	1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.3	INTEGER	read-create	Ethernet Type is valid only if the tnVclProtoBasedGroupMapProtocol is ethernet(1). Valid values for etype ranges is from 0x0600-0xffff. If tnVclProtoBasedGroupMapProtocol is not ethernet(1), this value will be 0xffff instead.
EIG tnVclProtoBasedGroupMapSnapOui	1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.4	EightOTwoOui	read-create	SNAP OUI is valid only if the tnVclProtoBasedGroupMapProtocol is snap(2). OUI (Organizationally Unique Identifier) is value in format of xx-xx-xx where each pair (xx) in string is a hexadecimal value ranges from 0x00-0xff. If tnVclProtoBasedGroupMapProtocol is not snap(2), this value will be FF-FF-FF instead.
INT tnVclProtoBasedGroupMapSnapPid	1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.5	INTEGER	read-create	SNAP PID is valid only if the tnVclProtoBasedGroupMapProtocol is snap(2). If the OUI is hexadecimal 000000, the protocol ID is the Ethernet type (EtherType) field value for the protocol running on top of SNAP; if the OUI is an OUI for a particular organization, the protocol ID is a value assigned by that organization to the protocol running on top of SNAP. In other words, if value of OUI field is 00-00-00 then value of PID will be etype (0x0600-0xffff) and if value of OUI is other than 00-00-00 then valid value of PID will be any value from 0x0000 to 0xffff. If tnVclProtoBasedGroupMapProtocol is not snap(2), this value will be 0xffff instead.
INT tnVclProtoBasedGroupMapLlcDsap	1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.6	INTEGER	read-create	LLC DSAP is valid only if the tnVclProtoBasedGroupMapProtocol is llc(3). DSAP: 1-byte long string (0x00-0xff). If tnVclProtoBasedGroupMapProtocol is not llc(3), this value will be 0xff instead.
INT tnVclProtoBasedGroupMapLlcSsap	1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.7	INTEGER	read-create	LLC SSAP is valid only if the tnVclProtoBasedGroupMapProtocol is llc(3). SSAP: 1-byte long string (0x00-0xff). If tnVclProtoBasedGroupMapProtocol is not llc(3), this value will be 0xff instead.
ROW tnVclProtoBasedGroupMapRowStatus	1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.8	RowStatus	read-create	The status of this entry.
tnVclProtoBasedVlanMapTable	1.3.6.1.4.1.868.2.5.4.1.8.2.2		not-accessible	The table is used to associate the protocol based VLAN groups with VLAN paramaters.
tnVclProtoBasedVlanMapEntry	1.3.6.1.4.1.868.2.5.4.1.8.2.2.1		not-accessible	A entry in this table is used to associate the protocol based VLAN groups with VLAN paramaters.
VLA tnVclProtoBasedVlanMapVlanId	1.3.6.1.4.1.868.2.5.4.1.8.2.2.1.1	VlanIndex	read-create	The Vlan Id will be assigned to the incoming frame(if needed) which matches this specific Protocol Group and port member list.
POR tnVclProtoBasedVlanMapPortMember	1.3.6.1.4.1.868.2.5.4.1.8.2.2.1.2	PortList	read-create	The member port list of this specific Protocol based Vlan match process takes place.
ROW tnVclProtoBasedVlanMapRowStatus	1.3.6.1.4.1.868.2.5.4.1.8.2.2.1.3	RowStatus	read-create	The status of this entry.
tnVclIpSubnetBasedMgmt	1.3.6.1.4.1.868.2.5.4.1.8.3
tnVclIpSubnetBasedTable	1.3.6.1.4.1.868.2.5.4.1.8.3.1		not-accessible	This Table is used to control IP subnet based VLAN functions.
tnVclIpSubnetBasedEntry	1.3.6.1.4.1.868.2.5.4.1.8.3.1.1		not-accessible	A entry in this table is used to control IP subnet based VLAN functions.
INT tnVclIpSubnetBasedVceId	1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.1	INTEGER	not-accessible	Indicates the index of the entry. The valid range is implement specific. If VCE ID is 0, application will auto-generate the VCE ID for that entry.
IP tnVclIpSubnetBasedIpAddr	1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.2	IpAddress	read-create	Indicates the IP address for match process.
INT tnVclIpSubnetBasedMaskLen	1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.3	INTEGER	read-create	Indicates the network mask length.
VLA tnVclIpSubnetBasedVlanId	1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.4	VlanIndex	read-create	The Vlan Id will be assigned to the incoming frame(if needed) which matches this specific IP subnet and port member list.
POR tnVclIpSubnetBasedPortMember	1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.5	PortList	read-create	The member port list of this specific IP subnet based Vlan match process takes place.
ROW tnVclIpSubnetBasedRowStatus	1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.6	RowStatus	read-create	The status of this entry.
tnVlanMQoSgmtConformance	1.3.6.1.4.1.868.2.5.4.2

RFC description

Manages VLAN and Quality of Service configuration for Transition Networks products.

Start monitoring Transition Networks, Inc. equipment (VLAN/QoS management config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TN-VLAN-MGMT-MIB

What Is TN-VLAN-MGMT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description