| OID symbolic | OID numeric | Type | Access | Description |
|---|
| INT snalcMibLevel | 1.3.6.1.4.1.495.2.1.6.35.9 | INTEGER | read-only | Used to determine current MIB module release supported
by the agent. Object is in decimal. |
| snalcSapTable | 1.3.6.1.4.1.495.2.1.6.35.10 | | not-accessible | This table contains configuration information for each SNA Link
Conversion layer SAP (service access point). |
| snalcSapEntry | 1.3.6.1.4.1.495.2.1.6.35.10.1 | | not-accessible | Defines a row in the snalcSapTable. Each row contains the objects which
define a service access point. |
| SAP snalcSapNumber | 1.3.6.1.4.1.495.2.1.6.35.10.1.1 | SapIndex | read-only | Identifies this SAP (service access point) with a numerical value which
must be unique for each SNA Link Conversion SAP. |
| INT snalcSapRowStatus | 1.3.6.1.4.1.495.2.1.6.35.10.1.2 | INTEGER | read-write | Determines the status of the objects in a table row.
Options:
invalid (1): Row is flagged, after next reset the values will be disabled
and the row is deleted from the table
valid (2): Values are enabled
Configuration Changed: administrative |
| ALI snalcSapAlias | 1.3.6.1.4.1.495.2.1.6.35.10.1.3 | Alias | read-write | Identifies this service access point by a textual name. Names must be
unique across all service access points at all layers.
Default Value: none
Range of Values: 1 -16 alphanumeric characters (first character must be a
letter)
Configuration Changed: administrative |
| ALI snalcSapCompanionAlias | 1.3.6.1.4.1.495.2.1.6.35.10.1.4 | Alias | read-write | Determines the sub-layer SAP (service access point) this SAP communicates
with. This object contains the textual name of the sub-layer SAP. SDLC,
LLC-2 (LLCIM), or QLLC SAP aliases are valid.
Default Value: none
Range of Values: 1 -16 alphanumeric characters (first character must be a
letter)
Configuration Changed: administrative |
| INT snalcSapState | 1.3.6.1.4.1.495.2.1.6.35.10.1.6 | INTEGER | read-only | Indicates the state of this SAP (service access point).
Options:
offLine (1): Indicates that the SAP is not configured.
unbound (2): Indicates that this SAP is configured but not yet bound to
its companion SAP.
bound (3): Indicates that this SAP is bound to its companion SAP. |
| snalcCrossConnectTable | 1.3.6.1.4.1.495.2.1.6.35.11 | | not-accessible | This table contains configuration information for each SNA Link
Conversion Module cross-connection. A cross-connection associates two link
connections so that SNA traffic can flow from one connection to the
other. |
| snalcCrossConnectEntry | 1.3.6.1.4.1.495.2.1.6.35.11.1 | | not-accessible | The parameters for a particular SNA Link Conversion Module cross-
connection. Up to 64 cross-connect rows may exist in the table. |
| SAP snalcCrossConnectSrcSapNumber | 1.3.6.1.4.1.495.2.1.6.35.11.1.1 | SapIndex | read-only | Identifies the source link for a cross-connection. When cross- connecting
hierarchical SNA devices, the source link is the side which is attached to
the SNA control unit (secondary link station).
Related Objects: snalcSapNumber |
| INT snalcCrossConnectSrcLinkAddrIndex | 1.3.6.1.4.1.495.2.1.6.35.11.1.2 | INTEGER | read-only | Identifies the link level connection for the source-side of a cross-
connection. Many link level connections can share the same source SAP
(service access point). This number is used to uniquely identify each
link. The value for this object depends on the type of link level service
the source SAP (snalcCrossConnectSrcSapNumber) is associated with
(snalcSapCompanionAlias).
When the source SAP is associated with the LLC-2 module, this object is
set to the value of the corresponding llcimSapNumber (lower SAP).
When the source SAP is associated with the SDLC module, this object is set
to the value of the corresponding sdlcCuId object.
When the source SAP is associated with the QLLC module, this object is set
to the value of the corresponding qllcDteIndex object.
Range of Values: 1 - 255 |
| SAP snalcCrossConnectDstSapNumber | 1.3.6.1.4.1.495.2.1.6.35.11.1.3 | SapIndex | read-only | Identifies the destination link for a cross-connection. When cross-
connecting hierarchical SNA devices, the destination link is the side
which is attached to the SNA host (primary link station). |
| INT snalcCrossConnectDstLinkAddrIndex | 1.3.6.1.4.1.495.2.1.6.35.11.1.4 | INTEGER | read-only | Identifies the link level connection for the destination-side of a cross-
connection. Many link level connections can share the same destination SAP
(service access point). This number is used to uniquely identify each
link. The value for this object depends on the type of link level service
the source SAP (snalcCrossConnectSrcSapNumber) is associated with
(snalcSapCompanionAlias).
When the destination SAP is associated with the LLC-2 module, this object
is set to the value of the corresponding llcimSapNumber (lower SAP).
When the destination SAP is associated with the SDLC module, this object
is set to the value of the corresponding sdlcCuId object.
When the destination SAP is associated with the QLLC module, this object
is set to the value of the corresponding qllcDteIndex object.
Range of Values: 1 - 255 |
| INT snalcCrossConnectRowStatus | 1.3.6.1.4.1.495.2.1.6.35.11.1.5 | INTEGER | read-write | Determines the status of the objects in a table row.
Options:
invalid (1): Row is flagged, after next reset the values will be disabled
and the row will be deleted from the table.
valid (2): Values are enabled.
Configuration Changed: administrative |
| OCT snalcCrossConnectPuId | 1.3.6.1.4.1.495.2.1.6.35.11.1.6 | OCTET STRING | read-write | Determines the SNA PU identifier sent to the host in an XID. The PU
identifier is composed of the block ID and node ID. This object applies
only when the destination-side of a cross- connection is LLC-2 (IEEE 802.2
LLC) and when snalcCrossConnectConnectMethod is set to 'local'.
Range of Values: (eight hexadecimal digits)
Default Value: 0
Configuration Changed: administrative and operative |
| INT snalcCrossConnectMaxRetries | 1.3.6.1.4.1.495.2.1.6.35.11.1.7 | INTEGER | read-write | Determines the maximum number of attempts to establish this cross-
connection before it is abandoned. If set to 255, SNA Link Conversion
retries forever until successful.
Range of Values: 1 - 255
Default Value: 255
Configuration Changed: administrative and operative |
| INT snalcCrossConnectConnectInterval | 1.3.6.1.4.1.495.2.1.6.35.11.1.8 | INTEGER | read-write | Determines the delay between attempts to establish this cross-connection
when not in slow connect mode.
Range of Values: 1 - 65535 seconds
Default Value: 10 seconds
Related Objects: snalcCrossConnectSlowConnectThreshold
Configuration Changed: administrative and operative |
| INT snalcCrossConnectSlowConnectThreshold | 1.3.6.1.4.1.495.2.1.6.35.11.1.9 | INTEGER | read-write | Determines the number of attempts that are made to establish a cross-
connection using the snalcCrossConnectConnectInterval . When the threshold
defined by this object is reached, slow connect mode is initialized. In
this mode, cross- connection attempts continue, but the interval between
attempts is set by snalcCrossConnectSlowConnectInterval.
Range of Values: 0 - 254 seconds (0 disables slow connect mode)
Default Value: 0 (disabled)
Related Objects: snalcCrossConnectConnectInterval
snalcCrossConnectSlowConnectInterval
Configuration Changed: administrative and operative |
| INT snalcCrossConnectSlowConnectInterval | 1.3.6.1.4.1.495.2.1.6.35.11.1.10 | INTEGER | read-write | Determines the delay between attempts to establish a cross-connection
when in slow connect mode.
Range of Values: 1 - 65535
Default Value: 60
Related Objects: snalcCrossConnectSlowConnectThreshold
Configuration Changed: administrative and operative |
| INT snalcCrossConnectWaitContactTimer | 1.3.6.1.4.1.495.2.1.6.35.11.1.11 | INTEGER | read-write | Determines the amount of time to wait for a Set Mode or SNA XID frame
from the remote station after the link has been established.
Range of Values: 1 - 65535 seconds
Default Value: 45 seconds
Configuration Changed: administrative and operative |
| INT snalcCrossConnectConnectMethod | 1.3.6.1.4.1.495.2.1.6.35.11.1.12 | INTEGER | read-write | Determines how the cross-connected links are established.
This object may be set only if the value of the associated
snalcCrossConnectAdminStatus object is 'down'.
Options:
local (1): The cross-connection is established by first attempting to
bring up the source connection. The destination connection is only
established after the source connection has transmitted data. This means
that connection establishment frames are not transported between the
source and destination links.
endToEnd (2) The cross-connection is established by first bringing up both
the source and destination links layers. Next, connection establishment
frames are transported (with conversion) between the source and
destination links to establish the connection. This option must be
selected when connecting PUs 1 or Nodes Type 2.1, or when connecting SDLC
or QLLC switched lines. It allows XID frames to be propagated between the
two cross-connected stations.
Default Value: endToEnd (2)
Related Objects: snalcCrossConnectWaitContactTimer
snalcCrossConnectAdminStatus
Configuration Changed: administrative and operative |
| INT snalcCrossConnectAdminStatus | 1.3.6.1.4.1.495.2.1.6.35.11.1.13 | INTEGER | read-write | Control which allows the cross- connections to be established or
disconnected. The order in which links are established is determined by
object snalcCrossConnectConnectMethod.
Options:
up (1): Causes SNA Link Conversion to activate the cross-connection by
establishing the source and destination links.
down (2): Causes SNA Link Conversion to de-activate the cross-connection
by disconnecting the source and destination links.
Default Value: down (2)
Related Objects: snalcCrossConnectConnectMethod
Configuration Changed: administrative and operative |
| INT snalcCrossConnectSrcOperStatus | 1.3.6.1.4.1.495.2.1.6.35.11.1.14 | INTEGER | read-only | Indicates the state of the source link.
Options:
offLine (1): Indicates that this cross-connection is not defined at the
layer or too many cross-connections have been defined.
notConnected (2): The connection is idle.
connecting (3): The connection is in the process of being established.
waitXid (4): Awaiting an incoming SNA XID frame to continue the link
establishment process.
setMode (5): A Set Mode command was sent to the remote station.
waitPartner (6): The link is established but is waiting for establishment
on the other cross- connected link.
sendXid (7): Awaiting the appropriate response to an XID that was sent to
the remote.
waitSetMode (8): Waiting for a Set Mode command from the remote.
delayConnect (9): Waiting for the connection timer
(snalcCrossConnectDstConnectInterval) to expire in order to retry the
connection.
associated (10): Indicates that both the source and destination link
levels are established and that connection establishment frames may be
exchanged.
disconnecting (11): The link is being disconnected.
linkDisconnecting (12): The link is terminating data exchange mode.
waitDisconnect (13): Waiting for the remote to clear the link.
failed (14) The cross-connection process failed. To retry, set
snalcCrossConnectAdminStatus from 'up' to 'down' and back to 'up'.
data (15): Indicates that the cross- connection between the source and
destination is established and that data frames may be exchanged. |
| INT snalcCrossConnectDstOperStatus | 1.3.6.1.4.1.495.2.1.6.35.11.1.15 | INTEGER | read-only | Indicates the state of the destination link.
Options:
offLine (1): Indicates that this cross-connection is not defined at the
layer or too many cross-connections have been defined.
notConnected (2): The connection is idle.
connecting (3): The connection is in the process of being established.
waitXid (4): Awaiting an incoming SNA XID frame to continue the link
establishment process.
setMode (5): A Set Mode command was sent to the remote station.
waitPartner (6): The link is established but is waiting for establishment
on the other cross- connected link.
sendXid (7): Awaiting the appropriate response to an XID that was sent to
the remote.
waitSetMode (8): Waiting for a Set Mode command from the remote.
delayConnect (9): Waiting for the connection timer
(snalcCrossConnectDstConnectInterval) to expire in order to retry the
connection.
associated (10): Indicates that both the source and destination link
levels are established and that connection establishment frames may be
exchanged.
disconnecting (11): The link is being disconnected.
linkDisconnecting (12): The link is terminating data exchange mode.
waitDisconnect (13): Waiting for the remote to clear the link.
failed (14) The cross-connection process failed. To retry, set
snalcCrossConnectAdminStatus from 'up' to 'down' and back to 'up'.
data (15): Indicates that the cross- connection between the source and
destination is established and that data frames may be exchanged. |
| INT snalcCrossConnectXidTransparent | 1.3.6.1.4.1.495.2.1.6.35.11.1.16 | INTEGER | read-write | Determines if any changes are to be made to the XID. If transparent mode
is specified, XID information fields are not modified, and the XID's are
passed transparently between the lower software layers (i.e.: SDLC, QLLC,
LIM).
Options:
nonTransparent (1)
transparent (2)
Default Value: nonTransparent (1)
Configuration Changed: administrative and operative |
| INT snalcCrossConnectDataLinkType | 1.3.6.1.4.1.495.2.1.6.35.11.1.17 | INTEGER | read-write | Configurates the type of connection. Two types are supported :
SNA connections, using the SDLC data link layer.
BSC connections, using the BSC data link layer.
Options:
sna (1)
bsc (2)
Default Value: sna (1)
Configuration Changed: administrative and operative |
