All MIBs › CXSnaLinkConversionModule-MIB › snalcCrossConnectDstLinkAddrIndex
snalcCrossConnectDstLinkAddrIndex
Module: CXSnaLinkConversionModule-MIB
OID (symbolic): CXSnaLinkConversionModule-MIB::snalcCrossConnectDstLinkAddrIndex
OID (numeric): 1.3.6.1.4.1.495.2.1.6.35.11.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Identifies the link level connection for the destination-side of a cross- connection. Many link level connections can share the same destination SAP (service access point). This number is used to uniquely identify each link. The value for this object depends on the type of link level service the source SAP (snalcCrossConnectSrcSapNumber) is associated with (snalcSapCompanionAlias).
When the destination SAP is associated with the LLC-2 module, this object is set to the value of the corresponding llcimSapNumber (lower SAP).
When the destination SAP is associated with the SDLC module, this object is set to the value of the corresponding sdlcCuId object.
When the destination SAP is associated with the QLLC module, this object is set to the value of the corresponding qllcDteIndex object.
Range of Values: 1 - 255
What is snalcCrossConnectDstLinkAddrIndex?
A 1-255 index that uniquely identifies the specific link-level connection on the destination SAP, since multiple links can share one SAP; like its source-side counterpart, its meaning depends on the destination SAP's underlying type (LLC-2, SDLC, or QLLC). An admin uses it to pinpoint the exact destination link within a cross-connection.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.35.11.1.4 snmpwalk -v2c -c public <target> CXSnaLinkConversionModule-MIB::snalcCrossConnectDstLinkAddrIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.35.11.1.4.1 snmpget -v2c -c public <target> CXSnaLinkConversionModule-MIB::snalcCrossConnectDstLinkAddrIndex.1
Start monitoring Memotec/Aastra conversion gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXSnaLinkConversionModule-MIB::snalcCrossConnectDstLinkAddrIndex OID value, configure state conditions and alerts, and monitor any Memotec/Aastra conversion gateways from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.35 | cxSnalc | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.35.11 | snalcCrossConnectTable | CXSnaLinkConversionModule-MIB |
| 1.3.6.1.4.1.495.2.1.6.35.11.1 | snalcCrossConnectEntry | CXSnaLinkConversionModule-MIB |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.4 | snalcCrossConnectDstLinkAddrIndex | CXSnaLinkConversionModule-MIB |