All MIBs › CXSnaLinkConversionModule-MIB › snalcCrossConnectPuId
snalcCrossConnectPuId
Module: CXSnaLinkConversionModule-MIB
OID (symbolic): CXSnaLinkConversionModule-MIB::snalcCrossConnectPuId
OID (numeric): 1.3.6.1.4.1.495.2.1.6.35.11.1.6
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Determines the SNA PU identifier sent to the host in an XID. The PU identifier is composed of the block ID and node ID. This object applies only when the destination-side of a cross- connection is LLC-2 (IEEE 802.2 LLC) and when snalcCrossConnectConnectMethod is set to 'local'.
Range of Values: (eight hexadecimal digits)
Default Value: 0
Configuration Changed: administrative and operative
What is snalcCrossConnectPuId?
Holds the 4-byte SNA PU identifier (block ID plus node ID, expressed as eight hex digits, default all zeros) that is sent to the host in an XID; it only matters when the destination side is LLC-2 and snalcCrossConnectConnectMethod is set to local. An admin sets this so the host sees the correct PU identity when the cross-connection establishes a session locally rather than end-to-end.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.35.11.1.6 snmpwalk -v2c -c public <target> CXSnaLinkConversionModule-MIB::snalcCrossConnectPuId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.35.11.1.6.1 snmpget -v2c -c public <target> CXSnaLinkConversionModule-MIB::snalcCrossConnectPuId.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.35.11.1.6.1 s <value>
Start monitoring Memotec/Aastra conversion gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXSnaLinkConversionModule-MIB::snalcCrossConnectPuId OID value, configure state conditions and alerts, and monitor any Memotec/Aastra conversion gateways from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.35 | cxSnalc | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.35.11 | snalcCrossConnectTable | CXSnaLinkConversionModule-MIB |
| 1.3.6.1.4.1.495.2.1.6.35.11.1 | snalcCrossConnectEntry | CXSnaLinkConversionModule-MIB |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.6 | snalcCrossConnectPuId | CXSnaLinkConversionModule-MIB |