Description: Indicates the state of the source link.

Options: offLine (1): Indicates that this cross-connection is not defined at the layer or too many cross-connections have been defined.

notConnected (2): The connection is idle.

connecting (3): The connection is in the process of being established.

waitXid (4): Awaiting an incoming SNA XID frame to continue the link establishment process.

setMode (5): A Set Mode command was sent to the remote station.

waitPartner (6): The link is established but is waiting for establishment on the other cross- connected link.

sendXid (7): Awaiting the appropriate response to an XID that was sent to the remote.

waitSetMode (8): Waiting for a Set Mode command from the remote.

delayConnect (9): Waiting for the connection timer (snalcCrossConnectDstConnectInterval) to expire in order to retry the connection.

associated (10): Indicates that both the source and destination link levels are established and that connection establishment frames may be exchanged.

disconnecting (11): The link is being disconnected.

linkDisconnecting (12): The link is terminating data exchange mode.

waitDisconnect (13): Waiting for the remote to clear the link.

failed (14) The cross-connection process failed. To retry, set snalcCrossConnectAdminStatus from 'up' to 'down' and back to 'up'.

data (15): Indicates that the cross- connection between the source and destination is established and that data frames may be exchanged.