HP-SN-IPX-MIB

All MIBs › HP-SN-IPX-MIB

Category: Domain: SNA/Legacy, IP and Core Protocols, Routing Protocols, SNA and Legacy Protocols, Vendor: HP/HPE

Description: HP ServerNet (Foundry-heritage) SNMP MIB for IPX (Novell NetWare) protocol routing and interface management on HP SN network devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HP-SN-IPX-MIB?

HP-SN-IPX-MIB is a vendor MIB, inherited from Foundry Networks technology used in HP ServerNet (SN) branded switches, for managing and monitoring the legacy IPX (Novell NetWare) routing protocol on those devices. It exposes configuration objects such as IPX routing mode and NetBIOS filter mode alongside operational traffic counters for received, transmitted, forwarded, and dropped/filtered IPX packets, plus RIP filter list configuration. Its monitoring role is mainly software/protocol-status oriented: administrators track packet counters like snIpxRcvPktsCnt, snIpxTxPktsCnt, snIpxFwdPktsCnt, and snIpxRcvDropPktsCnt/snIpxRcvFiltPktsCnt to detect IPX routing problems, misconfigured filters, or unexpected packet drops, and can issue snIpxClearCache/snIpxClearRoute/snIpxClearTrafficCnts operations to reset state. It is part of the broader HP/Foundry SN enterprise MIB family and depends on that vendor's general switch/routing object conventions for indexing. It was typically deployed on HP ServerNet (Foundry-derived) Layer 3 switches in legacy enterprise networks still running Novell NetWare/IPX alongside IP. Engineers can download the HP-SN-IPX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-SN-IPX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP ServerNet (Foundry-derived) Layer 3 switch/router

Monitoring Examples

An administrator would poll snIpxRcvPktsCnt, snIpxTxPktsCnt, and snIpxFwdPktsCnt to baseline normal IPX traffic levels on the switch, then watch snIpxRcvDropPktsCnt and snIpxRcvFiltPktsCnt for a spike indicating misconfigured filters or a failing IPX link. snIpxRoutingMode and snIpxNetBiosFilterMode would be checked to confirm the switch is operating in the intended routing/filtering mode, and snIpxRipGblFiltList/snIpxRipFiltOnAllPort reviewed to verify RIP route filtering matches policy. snIpxClearTrafficCnts would be invoked to reset counters after a maintenance window for a clean baseline.

What Can Be Monitored

IPX routing mode
NetBIOS filter mode
received/transmitted/forwarded IPX packet counts
dropped/filtered IPX packet counts
RIP filter list configuration

Imported Objects

From HP-SN-ROOT-MIB

snIpx

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter

OIDs

OID symbolic	OID numeric	Type	Access	Description
snIpxCache	1.3.6.1.4.1.11.2.3.7.11.12.2.1.2
INT snIpxCacheEncap	1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.5	INTEGER	read-only	The IPX encapsulation frame type.
snIpxCacheEntry	1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1		not-accessible	An entry in the IPX Cache table.
INT snIpxCacheIndex	1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.1	INTEGER	read-only	The table index for a IPX Cache entry.
NET snIpxCacheNetNum	1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.2	NetNumber	read-only	Cache Network number.
PHY snIpxCacheNode	1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.3	PhysAddress	read-only	Cache Node Number.
RTR snIpxCacheOutFilter	1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.4	RtrStatus	read-only	Cache Outbound Filter is ether disabled(0) or enabled(1).
POR snIpxCachePort	1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.6	PortIndex	read-only	IPX Router Port number.
snIpxCacheTable	1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1		not-accessible	IPX Cache table.
CLE snIpxClearCache	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.3	ClearStatus	read-write	clear(1) will clear cache table.
CLE snIpxClearRoute	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.4	ClearStatus	read-write	clear(1) will clear ipx route table.
CLE snIpxClearTrafficCnts	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.5	ClearStatus	read-write	clear(1) will clear ipx all traffic counters. - snIpxRcvPktsCnt, snIpxFwdPktsCnt, snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt, snIpxRcvFiltPktsCnt, snIpxTxFiltPktsCnt.
INT snIpxDestHopCnts	1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.4	INTEGER	read-only	Number of hops to reach the destination.
NET snIpxDestNetNum	1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.2	NetNumber	read-only	Destination Network number.
INT snIpxDestPort	1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.6	INTEGER	read-only	The destination port.
snIpxFwdFilter	1.3.6.1.4.1.11.2.3.7.11.12.2.1.5
ACT snIpxFwdFilterAction	1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.2	Action	read-write	Action to take if the ipx packet match with this filter.
NET snIpxFwdFilterDestNet	1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.6	NetNumber	read-write	Destination Network Number.
PHY snIpxFwdFilterDestNode	1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.7	PhysAddress	read-write	Destination Node Number.
snIpxFwdFilterEntry	1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1		not-accessible	An entry in the IPX Forward Filter table.
INT snIpxFwdFilterIdx	1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.1	INTEGER	read-only	The filter ID for a filter entry.
INT snIpxFwdFilterRowStatus	1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.8	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
INT snIpxFwdFilterSocket	1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.3	INTEGER	read-write	IPX Forward Filter Socket Number.
NET snIpxFwdFilterSrcNet	1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.4	NetNumber	read-write	Source Network Number.
PHY snIpxFwdFilterSrcNode	1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.5	PhysAddress	read-write	Source Node Number.
snIpxFwdFilterTable	1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1		not-accessible	IPX Forward Filter table.
CTR snIpxFwdPktsCnt	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.8	Counter	read-only	IPX forwarding packets counter.
PHY snIpxFwdRouterNode	1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.3	PhysAddress	read-only	Forward Router Node Number.
snIpxGen	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1
snIpxIfFwdAccess	1.3.6.1.4.1.11.2.3.7.11.12.2.1.8
INT snIpxIfFwdAccessDir	1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.2	INTEGER	read-only	The access direction of incoming packet filter or outgoing packet filter.
snIpxIfFwdAccessEntry	1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1		not-accessible	An entry in the IPX Forward Access table.
OCT snIpxIfFwdAccessFilterList	1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.3	OCTET STRING	read-write	An IPX IF Forward Filter List.
INT snIpxIfFwdAccessPort	1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.1	INTEGER	read-only	The IPX interface to which the Forward Filter applies.
INT snIpxIfFwdAccessRowStatus	1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.4	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
snIpxIfFwdAccessTable	1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1		not-accessible	IPX IF Forward Access table.
snIpxIfRipAccess	1.3.6.1.4.1.11.2.3.7.11.12.2.1.9
INT snIpxIfRipAccessDir	1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.2	INTEGER	read-only	The access direction of incoming packet filter or outgoing packet filter.
snIpxIfRipAccessEntry	1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1		not-accessible	An entry in the IPX Forward Access table.
OCT snIpxIfRipAccessFilterList	1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.3	OCTET STRING	read-write	An IPX IF RIP Access Filter List.
INT snIpxIfRipAccessPort	1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.1	INTEGER	read-only	The IPX interface to which the RIP Filter applies.
INT snIpxIfRipAccessRowStatus	1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.4	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
snIpxIfRipAccessTable	1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1		not-accessible	IPX IF RIP Access table.
snIpxIfSapAccess	1.3.6.1.4.1.11.2.3.7.11.12.2.1.10
INT snIpxIfSapAccessDir	1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.2	INTEGER	read-only	The access direction of incoming packet filter or outgoing packet filter.
snIpxIfSapAccessEntry	1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1		not-accessible	An entry in the IPX Forward Access table.
OCT snIpxIfSapAccessFilterList	1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.3	OCTET STRING	read-write	An IPX IF SAP Access Filter List.
INT snIpxIfSapAccessPort	1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.1	INTEGER	read-only	The IPX interface to which the SAP Filter applies.
INT snIpxIfSapAccessRowStatus	1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.4	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
snIpxIfSapAccessTable	1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1		not-accessible	IPX IF RIP Access table.
RTR snIpxNetBiosFilterMode	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.2	RtrStatus	read-write	Enabled/Disabled NetBios Filter Mode status.
snIpxPortAddr	1.3.6.1.4.1.11.2.3.7.11.12.2.1.11
INT snIpxPortAddrEncap	1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.2	INTEGER	read-only	The IPX encapsulation type. ethernet8022(1), ethernet8023(2), ethernetII(3), ethernetSnap(4) Note: Each Network Number can be assigned with one unique Frame type; Otherwise, a SNMP-SET error will be returned.
snIpxPortAddrEntry	1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1		not-accessible	An entry in the IPX Port Address table.
RTR snIpxPortAddrNetBiosFilterMode	1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.5	RtrStatus	read-write	Enabled/Disabled NetBios Filter Mode status per Port Address entry.
NET snIpxPortAddrNetNum	1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.3	NetNumber	read-write	An unique Network number for the IPX interface port.
POR snIpxPortAddrPort	1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.1	PortIndex	read-only	The port index for port address entry.
INT snIpxPortAddrRowStatus	1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.4	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
snIpxPortAddrTable	1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1		not-accessible	IPX port address table.
snIpxPortCounters	1.3.6.1.4.1.11.2.3.7.11.12.2.1.12
snIpxPortCountersEntry	1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1		not-accessible	An entry in the IPX Port Counters table.
CTR snIpxPortCountersFwdPktsCnt	1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.4	Counter	read-only	IPX forwarding packets counter for the interface.
POR snIpxPortCountersPort	1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.1	PortIndex	read-only	The port index for port Counters entry.
CTR snIpxPortCountersRcvDropPktsCnt	1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.5	Counter	read-only	IPX receiving drop packets counter for the interface.
CTR snIpxPortCountersRcvFiltPktsCnt	1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.7	Counter	read-only	IPX receiving filter packets counter for the interface.
CTR snIpxPortCountersRcvPktsCnt	1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.2	Counter	read-only	IPX incoming packets counter for the interface.
snIpxPortCountersTable	1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1		not-accessible	IPX port Counters table.
CTR snIpxPortCountersTxDropPktsCnt	1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.6	Counter	read-only	IPX transmitting drop packets counter for the interface.
CTR snIpxPortCountersTxFiltPktsCnt	1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.8	Counter	read-only	IPX transmitting filter packets counter for the interface.
CTR snIpxPortCountersTxPktsCnt	1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.3	Counter	read-only	IPX Outgoing packets counter for the interface.
CTR snIpxRcvDropPktsCnt	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.9	Counter	read-only	IPX receiving drop packets counter.
CTR snIpxRcvFiltPktsCnt	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.10	Counter	read-only	IPX receiving filter packets counter.
CTR snIpxRcvPktsCnt	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.6	Counter	read-only	IPX incoming packets counter.
snIpxRipFilter	1.3.6.1.4.1.11.2.3.7.11.12.2.1.6
ACT snIpxRipFilterAction	1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.2	Action	read-write	Action to take if the ipx packet match with this filter.
snIpxRipFilterEntry	1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1		not-accessible	An entry in the IPX RIP Filter table.
INT snIpxRipFilterId	1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.1	INTEGER	read-only	The filter ID for a filter entry.
NET snIpxRipFilterMask	1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.4	NetNumber	read-write	IPX RIP Filter Network/Subnet Mask.
NET snIpxRipFilterNet	1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.3	NetNumber	read-write	IPX RIP Filter Network number.
INT snIpxRipFilterRowStatus	1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.5	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
snIpxRipFilterTable	1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1		not-accessible	IPX RIP Filter table.
INT snIpxRipFiltOnAllPort	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.12	INTEGER	read-write	Apply the IPX RIP Global filter list snIpxRipGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all RIP filter lists to/from all ports. Prior to sending this command, snIpxRipGblFiltList must be ready. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation is failed, then a SET with value of (2)or(3) returns error 'GenError'. Deleted(2)&(3) go away immediately. The following values can be returned on reads: noSuch(0)...no such operation yet. valid(1)....set operation is done and is valid
OCT snIpxRipGblFiltList	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.11	OCTET STRING	read-write	An IPX RIP Global Filter List.
snIpxRoute	1.3.6.1.4.1.11.2.3.7.11.12.2.1.3
snIpxRouteEntry	1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1		not-accessible	An entry in the IPX route table.
INT snIpxRouteIndex	1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.1	INTEGER	read-only	The table index for a IPX route entry.
INT snIpxRouteMetric	1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.5	INTEGER	read-only	The metrics to next hop router.
snIpxRouteTable	1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1		not-accessible	IPX route table.
RTR snIpxRoutingMode	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.1	RtrStatus	read-write	Enabled/Disabled System IPX Routing Mode status.
snIpxSapFilter	1.3.6.1.4.1.11.2.3.7.11.12.2.1.7
ACT snIpxSapFilterAction	1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.2	Action	read-write	Action to take if the ipx packet match with this filter.
snIpxSapFilterEntry	1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1		not-accessible	An entry in the IPX SAP Filter table.
INT snIpxSapFilterId	1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.1	INTEGER	read-only	The filter ID for a filter entry.
OCT snIpxSapFilterName	1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.4	OCTET STRING	read-write	IPX SAP Filter Name.
INT snIpxSapFilterRowStatus	1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.5	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
snIpxSapFilterTable	1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1		not-accessible	IPX SAP Filter table.
INT snIpxSapFilterType	1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.3	INTEGER	read-write	IPX SAP Filter type to be matched.
INT snIpxSapFiltOnAllPort	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.14	INTEGER	read-write	Apply the IPX SAP Global filter list snIpxSapGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all SAP filter lists to/from all ports. Prior to sending this command, snIpxSapGblFiltList must be ready. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation is failed, then a SET with value of (2)or(3) returns error 'GenError'. Deleted(2)&(3) go away immediately. The following values can be returned on reads: noSuch(0)...no such operation yet. valid(1)....set operation is done and is valid
OCT snIpxSapGblFiltList	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.13	OCTET STRING	read-write	An IPX SAP Global Filter List.
snIpxServer	1.3.6.1.4.1.11.2.3.7.11.12.2.1.4
snIpxServerEntry	1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1		not-accessible	An entry in the IPX Server table.
INT snIpxServerHopCnts	1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.6	INTEGER	read-only	Number of intervening networks to reach the server.
INT snIpxServerIndex	1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.1	INTEGER	read-only	The table index for a IPX Server entry.
OCT snIpxServerName	1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.7	OCTET STRING	read-only	IPX Server Name.
NET snIpxServerNetNum	1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.3	NetNumber	read-only	Server Network number.
PHY snIpxServerNode	1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.4	PhysAddress	read-only	Server Node Number.
INT snIpxServerSocket	1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.5	INTEGER	read-only	Server Socket Number.
snIpxServerTable	1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1		not-accessible	IPX Server table.
INT snIpxServerType	1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.2	INTEGER	read-only	IPX Server Type.
CTR snIpxTxDropPktsCnt	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.15	Counter	read-only	IPX transmitting drop packets counter.
CTR snIpxTxFiltPktsCnt	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.16	Counter	read-only	IPX transmitting filter packets counter.
CTR snIpxTxPktsCnt	1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.7	Counter	read-only	IPX Outgoing packets counter.

RFC description

Manages IPX routing operations including caching, routing tables, server discovery, and filter controls for Foundry SnIpx routers.

Start monitoring HP ServerNet (Foundry-derived) Layer 3 switch/router (legacy IPX routing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-SN-IPX-MIB

What Is HP-SN-IPX-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description