| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ctSSA | 1.3.6.1.4.1.52.4497 | | | |
| ctDs0Mib | 1.3.6.1.4.1.52.4497.20 | | | |
| INT ctDs0ifNumber | 1.3.6.1.4.1.52.4497.20.1 | INTEGER | read-only | The number of network interfaces (regardless of their
current state) present on this system. |
| ctDs0ifTable | 1.3.6.1.4.1.52.4497.20.2 | | not-accessible | A list of interface entries. The number of entries
is given by the value of ctDs0ifNumber. |
| ctDs0ifEntry | 1.3.6.1.4.1.52.4497.20.2.1 | | not-accessible | An entry containing management information applicable
to a particular interface. |
| NUM ctDs0ifIndex | 1.3.6.1.4.1.52.4497.20.2.1.1 | InterfaceIndex | read-only | A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initialization of the entity's network
management system to the next re-initialization. |
| STR ctDs0ifDescr | 1.3.6.1.4.1.52.4497.20.2.1.2 | DisplayString | read-only | A textual string containing information about the
interface. This string should include the name of the
manufacturer, the product name and the version of the
interface hardware/software. |
| IAN ctDs0ifType | 1.3.6.1.4.1.52.4497.20.2.1.3 | IANActDs0ifType | read-only | The type of interface. Additional values for ctDs0ifType
are assigned by the Internet Assigned Numbers
Authority (IANA), through updating the syntax of the
IANAifType textual convention. |
| INT ctDs0ifMtu | 1.3.6.1.4.1.52.4497.20.2.1.4 | INTEGER | read-only | The size of the largest packet which can be
sent/received on the interface, specified in octets.
For interfaces that are used for transmitting network
datagrams, this is the size of the largest network
datagram that can be sent on the interface. |
| GAU ctDs0ifSpeed | 1.3.6.1.4.1.52.4497.20.2.1.5 | Gauge | read-only | An estimate of the interface's current bandwidth in
bits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth. If the bandwidth of the interface is
greater than the maximum value reportable by this
object then this object should report its maximum
value (4,294,967,295) and ctDs0ifHighSpeed must be used to
report the interace's speed. For a sub-layer which
has no concept of bandwidth, this object should be
zero. |
| PHY ctDs0ifPhysAddress | 1.3.6.1.4.1.52.4497.20.2.1.6 | PhysAddress | read-only | The interface's address at its protocol sub-layer.
The interface's media-specific MIB must define the bit
and byte ordering and format of the value contained by
this object. For interfaces which do not have such an
address (e.g., a serial line), this object should
contain an octet string of zero length. |
| INT ctDs0ifAdminStatus | 1.3.6.1.4.1.52.4497.20.2.1.7 | INTEGER | read-write | The desired state of the interface. The testing(3)
state indicates that no operational packets can be
passed. When a managed system initializes, all
interfaces start with ctDs0ifAdminStatus in the down(2)
state. As a result of either explicit management
action or per configuration information retained by
the managed system, ctDs0ifAdminStatus is then changed to
either the up(1) or testing(3) states (or remains in
the down(2) state). |
| INT ctDs0ifOperStatus | 1.3.6.1.4.1.52.4497.20.2.1.8 | INTEGER | read-only | The current operational state of the interface. The
testing(3) state indicates that no operational packets
can be passed. If ctDs0ifAdminStatus is down(2) then
ctDs0ifOperStatus should be down(2). If ctDs0ifAdminStatus is
changed to up(1) then ctDs0ifOperStatus should change to
up(1) if the interface is ready to transmit and
receive network traffic; it should change to
dormant(5) if the interface is waiting for external
actions (such as a serial line waiting for an
incomming connection); it should remain in the down(2)
state if and only if there is a fault that prevents if
from going to the up(1) state. |
| TIK ctDs0ifLastChange | 1.3.6.1.4.1.52.4497.20.2.1.9 | TimeTicks | read-only | The value of sysUpTime at the time the interface
entered its current operational state. If the current
state was entered prior to the last re-initialization
of the local network management subsystem, then this
object contains a zero value. |
| CTR ctDs0ifInOctets | 1.3.6.1.4.1.52.4497.20.2.1.10 | Counter | read-only | The total number of octets received on the interface,
including framing characters. |
| CTR ctDs0ifInUcastPkts | 1.3.6.1.4.1.52.4497.20.2.1.11 | Counter | read-only | The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were not addressed to a
multicast or broadcast address at this sub-layer. |
| CTR ctDs0ifInNUcastPkts | 1.3.6.1.4.1.52.4497.20.2.1.12 | Counter | read-only | The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast or broadcast address at this sub-layer.
This object is deprecated in favour of
ctDs0ifInMulticastPkts and ctDs0ifInBroadcastPkts. |
| CTR ctDs0ifInDiscards | 1.3.6.1.4.1.52.4497.20.2.1.13 | Counter | read-only | The number of inbound packets which were chosen to be
discarded even though no errors had been detected to
prevent their being deliverable to a higher-layer
protocol. One possible reason for discarding such a
packet could be to free up buffer space. |
| CTR ctDs0ifInErrors | 1.3.6.1.4.1.52.4497.20.2.1.14 | Counter | read-only | For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from
being deliverable to a higher-layer protocol. For
character-oriented or fixed-length interfaces, the
number of inbound transmission units that contained
errors preventing them from being deliverable to a
higher-layer protocol. |
| CTR ctDs0ifInUnknownProtos | 1.3.6.1.4.1.52.4497.20.2.1.15 | Counter | read-only | For packet-oriented interfaces, the number of packets
received via the interface which were discarded
because of an unknown or unsupported protocol. For
character-oriented or fixed-length interfaces which
support protocol multiplexing the number of
transmission units received via the interface which
were discarded because of an unknown or unsupported
protocol. For any interface which does not support
protocol multiplexing, this counter will always be 0. |
| CTR ctDs0ifOutOctets | 1.3.6.1.4.1.52.4497.20.2.1.16 | Counter | read-only | The total number of octets transmitted out of the
interface, including framing characters. |
| CTR ctDs0ifOutUcastPkts | 1.3.6.1.4.1.52.4497.20.2.1.17 | Counter | read-only | The total number of packets that higher-level
protocols requested be transmitted, and which were not
addressed to a multicast or broadcast address at this
sub-layer, including those that were discarded or not
sent. |
| CTR ctDs0ifOutNUcastPkts | 1.3.6.1.4.1.52.4497.20.2.1.18 | Counter | read-only | The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast or broadcast address at this
sub-layer, including those that were discarded or not
sent.
This object is deprecated in favour of
ctDs0ifOutMulticastPkts and ctDs0ifOutBroadcastPkts. |
| CTR ctDs0ifOutDiscards | 1.3.6.1.4.1.52.4497.20.2.1.19 | Counter | read-only | The number of outbound packets which were chosen to
be discarded even though no errors had been detected
to prevent their being transmitted. One possible
reason for discarding such a packet could be to free
up buffer space. |
| CTR ctDs0ifOutErrors | 1.3.6.1.4.1.52.4497.20.2.1.20 | Counter | read-only | For packet-oriented interfaces, the number of
outbound packets that could not be transmitted because
of errors. For character-oriented or fixed-length
interfaces, the number of outbound transmission units
that could not be transmitted because of errors. |
| GAU ctDs0ifOutQLen | 1.3.6.1.4.1.52.4497.20.2.1.21 | Gauge | read-only | The length of the output packet queue (in packets). |
| OID ctDs0ifSpecific | 1.3.6.1.4.1.52.4497.20.2.1.22 | OBJECT IDENTIFIER | read-only | A reference to MIB definitions specific to the
particular media being used to realize the interface.
It is recommended that this value point to an instance
of a MIB object in the media-specific MIB, i.e., that
this object have the semantics associated with the
InstancePointer textual convention defined in RFC
1443. In fact, it is recommended that the media-
specific MIB specify what value ifSpecific should/can
take for values of ifType. If no MIB definitions
specific to the particular media are available, the
value should be set to the OBJECT IDENTIFIER { 0 0 }. |
| ctDsx0Mib | 1.3.6.1.4.1.52.4497.21 | | | |
| ctDsx0ConfigTable | 1.3.6.1.4.1.52.4497.21.1 | | not-accessible | ISDN lapd table containing configuration and
operational parameters for all ISDN signaling
channels on this managed device. |
| ctDsx0ConfigEntry | 1.3.6.1.4.1.52.4497.21.1.1 | | not-accessible | An entry in the ISDN Lapd Table. |
| STR ctDsx0ConfigLineId | 1.3.6.1.4.1.52.4497.21.1.1.1 | DisplayString | read-only | Line id of the Isdn Lapd table entry |
| INT ctDsx0ConfigAdminStatus | 1.3.6.1.4.1.52.4497.21.1.1.2 | INTEGER | read-write | Administration status for the Isdn Lapd table entry. |
| INT ctDsx0ConfigOperStatus | 1.3.6.1.4.1.52.4497.21.1.1.3 | INTEGER | read-only | Operational status for the Isdn Lapd table entry. |
