HH3C-ATM-DXI-MIB

All MIBs › HH3C-ATM-DXI-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2005-04-14

Category: ATM, Domain: WAN, Vendor: H3C/HH3C

Description: Manages ATM Data Exchange Interface (DXI) configuration and statistics on H3C WAN interface cards.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-ATM-DXI-MIB?

HH3C-ATM-DXI-MIB is an H3C enterprise MIB for configuring ATM Data Exchange Interface (DXI) parameters on H3C WAN interface cards, a legacy technology bridging serial links to ATM networks. Per its module description it holds configuration objects for the ATM-DXI feature with no additional constraints documented. Such a MIB would typically expose interface-level configuration and possibly frame/cell statistics for the DXI encapsulation, reflecting software configuration state rather than physical hardware sensors. It supplements standard ATM MIBs by adding H3C-specific DXI configuration on top of the generic ATM interface model. It would be deployed on legacy H3C WAN routers/interface cards still running ATM-DXI links in older carrier or enterprise backbone connections, where HH3C-ATM-DXI-MIB SNMP monitoring would apply; no object names were included in the source data, so specifics cannot be confirmed.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-ATM-DXI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C WAN routers/interface cards (ATM-DXI)

Monitoring Examples

No sample objects were provided for this MIB, so a concrete monitoring scenario naming real table/object names cannot be constructed. Based on the module description, an admin would typically poll ATM-DXI configuration objects to confirm interface encapsulation settings match the intended WAN configuration.

What Can Be Monitored

ATM-DXI interface configuration

Imported Objects

From HH3C-OID-MIB

hh3cCommon

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cAtmDxi	1.3.6.1.4.1.25506.2.49			This MIB contains objects to manage configuration of ATM-DXI. There are no constraints on this MIB.
hh3cAtmDxiScalarGroup	1.3.6.1.4.1.25506.2.49.1
INT hh3cAtmDxiConfMode	1.3.6.1.4.1.25506.2.49.1.1	INTEGER	read-only	This node identifies the ATM-DXI mode being used at the ATM-DXI port.
hh3cAtmDxiIfObjects	1.3.6.1.4.1.25506.2.49.2
hh3cAtmDxiPvcTable	1.3.6.1.4.1.25506.2.49.2.1		not-accessible	This table describes information of PVC in ATM-DXI interface.
hh3cAtmDxiPvcEntry	1.3.6.1.4.1.25506.2.49.2.1.1		not-accessible	The entry of hh3cAtmDxiPvcTable.
I32 hh3cAtmDxiPvcVpi	1.3.6.1.4.1.25506.2.49.2.1.1.1	Integer32	not-accessible	The value of VPI. It can't be 0 if hh3cAtmDxiPvcVci is 0.
I32 hh3cAtmDxiPvcVci	1.3.6.1.4.1.25506.2.49.2.1.1.2	Integer32	not-accessible	The value of VCI. It can't be 0 if hh3cAtmDxiPvcVpi is 0.
I32 hh3cAtmDxiPvcDFA	1.3.6.1.4.1.25506.2.49.2.1.1.3	Integer32	read-create	The index of PVC. It is equal with vci and VPI. And this node value is correlate with hh3cAtmDxiPvcVpi and hh3cAtmDxiPvcVci.
INT hh3cAtmDxiPvcEncType	1.3.6.1.4.1.25506.2.49.2.1.1.4	INTEGER	read-create	Encapsulation type of the frame.
I32 hh3cAtmDxiPvcMapCount	1.3.6.1.4.1.25506.2.49.2.1.1.5	Integer32	read-create	The number of map. One map can only associate with one PVC, but one PVC can associate with 32 maps. This node is the map count which one PVC associated with.
ROW hh3cAtmDxiPvcRowStatus	1.3.6.1.4.1.25506.2.49.2.1.1.6	RowStatus	read-create	Only support 'destroy' 'createAndGo' and 'active'.
hh3cAtmDxiMapTable	1.3.6.1.4.1.25506.2.49.2.2		not-accessible	This table describes PVC map information.
hh3cAtmDxiMapEntry	1.3.6.1.4.1.25506.2.49.2.2.1		not-accessible	The entry of hh3cAtmDxiMapTable.
IPt hh3cAtmDxiMapPeerIpType	1.3.6.1.4.1.25506.2.49.2.2.1.1	InetAddressType	not-accessible	The type of ip address: IPv4 or IPv6.
IP hh3cAtmDxiMapPeerIp	1.3.6.1.4.1.25506.2.49.2.2.1.2	InetAddress	not-accessible	The peer ip address. This ip address is the peer ip address which the frame will arrive.
I32 hh3cAtmDxiMapPvcVpi	1.3.6.1.4.1.25506.2.49.2.2.1.3	Integer32	not-accessible	The VPI of PVC. It can't be 0 if hh3cAtmDxiMapPvcVci is 0.
I32 hh3cAtmDxiMapPvcVci	1.3.6.1.4.1.25506.2.49.2.2.1.4	Integer32	not-accessible	The VCI of PVC. It can't be 0 if hh3cAtmDxiMapPvcVpi is 0.
INT hh3cAtmDxiMapType	1.3.6.1.4.1.25506.2.49.2.2.1.5	INTEGER	not-accessible	Pvc map type.
I32 hh3cAtmDxiMapInarpTime	1.3.6.1.4.1.25506.2.49.2.2.1.6	Integer32	read-create	The interval time of inarp request. This node describes the interval time inarp request frame sent. If the hh3cAtmDxiMapType isn't inarp, this value is 0. Its unit is minute.
INT hh3cAtmDxiMapBroEnable	1.3.6.1.4.1.25506.2.49.2.2.1.7	INTEGER	read-create	Whether ATM-DXI map enable broadcast or not.
ROW hh3cAtmDxiMapRowStatus	1.3.6.1.4.1.25506.2.49.2.2.1.8	RowStatus	read-create	Only support 'destroy', 'createAndGo' and 'active'.
hh3cAtmDxiConformance	1.3.6.1.4.1.25506.2.49.3
hh3cAtmDxiCompliances	1.3.6.1.4.1.25506.2.49.3.1
hh3cAtmDxiCompliance	1.3.6.1.4.1.25506.2.49.3.1.1			The compliance statement.
hh3cAtmDxiGroup	1.3.6.1.4.1.25506.2.49.3.2
hh3cPVCMAPGroup	1.3.6.1.4.1.25506.2.49.3.2.1			This group includes nodes which are associated with interface.
hh3cAtmDxiGeneralGroup	1.3.6.1.4.1.25506.2.49.3.2.2			This group includes the general nodes about ATM-DXI.

RFC description

Configures ATM-DXI PVCs and mappings for H3C ATM devices supporting multiple DXI modes.

Start monitoring H3C WAN router/interface card (ATM-DXI, legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-ATM-DXI-MIB

What Is HH3C-ATM-DXI-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description