CT-DS0ent-MIB :: ctDs0ifSpeed

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CT-DS0ent-MIB › ctDs0ifSpeed

ctDs0ifSpeed

Module: CT-DS0ent-MIB

OID (symbolic): CT-DS0ent-MIB::ctDs0ifSpeed

OID (numeric): 1.3.6.1.4.1.52.4497.20.2.1.5

Node type: OBJECT-TYPE

Type: Gauge

Access: read-only

Description: An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ctDs0ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero.

What is ctDs0ifSpeed?

This read-only Gauge estimates the interface's current bandwidth in bits per second, reporting a nominal value for interfaces that don't vary in bandwidth, and capping at its maximum reportable value, 4,294,967,295, for very high-speed interfaces that must instead be read via ctDs0ifHighSpeed. An admin uses this to confirm a DS0 channel is running at its expected bandwidth. For example, a DS0 channel that should report 64000 bps but instead shows a lower value would flag a possible channel misconfiguration to the admin.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4497.20.2.1.5
snmpwalk -v2c -c public <target> CT-DS0ent-MIB::ctDs0ifSpeed

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4497.20.2.1.5.1
snmpget -v2c -c public <target> CT-DS0ent-MIB::ctDs0ifSpeed.1

Start monitoring Cabletron Systems equipment (DS0 TDM circuits) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CT-DS0ent-MIB::ctDs0ifSpeed OID value, configure state conditions and alerts, and monitor any Cabletron Systems equipment (DS0 TDM circuits) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4497ctSSACT-DARADIUS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.52.4497.20ctDs0MibCT-DS0ent-MIB
1.3.6.1.4.1.52.4497.20.2ctDs0ifTableCT-DS0ent-MIB
1.3.6.1.4.1.52.4497.20.2.1ctDs0ifEntryCT-DS0ent-MIB
1.3.6.1.4.1.52.4497.20.2.1.5ctDs0ifSpeedCT-DS0ent-MIB