All MIBs › CROSSSTREAM-MIB
Category: Network Monitoring (RMON)
Description: Monitors CrossStream network management platform status, data streams, and cross-connect configuration.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CROSSSTREAM-MIB?
CROSSSTREAM-MIB is an Artel Video Systems (enterprise OID 4962, CrossStream video-transport product line) proprietary MIB reporting device identity and ATM/ASI video-stream capacity. Its objects cover device name/serial number/model/firmware-hardware version/time/uptime, IP address/netmask/gateway/host address, a device-reset action, a VSAR (Video Stream Adaptation/Routing?) reset action and configuration table (index, type, action), and used/active/max ATM-stream and ASI-stream counts. As a configuration/performance MIB it lets an administrator confirm how much ATM/ASI video-stream capacity remains available on an Artel CrossStream device. It is deployed on the Artel Video Systems CrossStream product line. Engineers can download the CROSSSTREAM-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CROSSSTREAM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Artel Video Systems CrossStream product line
Monitoring Examples
An administrator checks activeAtmStreamsNumber against maxAtmStreamsNumber to confirm remaining video-stream capacity on an Artel CrossStream device.
What Can Be Monitored
- ATM/ASI video-stream capacity utilization
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| IpAddress | |
| enterprises |
From RFC1213-MIB
| DisplayString | |
| ifIndex |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| INT activeAsiStreamsNumber | 1.3.6.1.4.1.4962.2.1.2.5 | INTEGER | read-only | Active Number of ASI Transport Streams running in the system |
| INT activeAtmStreamsNumber | 1.3.6.1.4.1.4962.2.1.2.2 | INTEGER | read-only | Active Number of Transport Streams running in the system |
| INT activePidsNumber | 1.3.6.1.4.1.4962.2.1.2.11 | INTEGER | read-only | Active number of PIDs running in the system |
| INT activeProgsNumber | 1.3.6.1.4.1.4962.2.1.2.8 | INTEGER | read-only | Active number of programs running in the system |
| artel | 1.3.6.1.4.1.4962 | |||
| INT asiStreamChannel | 1.3.6.1.4.1.4962.2.1.5.6.1.2 | INTEGER | read-write | Channel associated with this ASI stream. |
| asiStreamEntry | 1.3.6.1.4.1.4962.2.1.5.6.1 | not-accessible | An ASI Transport stream entry specifies the port number. | |
| INT asiStreamPort | 1.3.6.1.4.1.4962.2.1.5.6.1.1 | INTEGER | read-write | Physical port number of the ASI stream. |
| asiStreamTable | 1.3.6.1.4.1.4962.2.1.5.6 | not-accessible | This table contians ASI stream configuration parameters, one entry per streamTable for which streamType is ASI. | |
| atmStreamEntry | 1.3.6.1.4.1.4962.2.1.5.5.1 | not-accessible | An ATM Transport Stream entry contains vpi and vci | |
| atmStreamTable | 1.3.6.1.4.1.4962.2.1.5.5 | not-accessible | This table contains ATM stream configuration parameters, one entry per streamTable for which streamType is ATM. | |
| INT atmStreamVci | 1.3.6.1.4.1.4962.2.1.5.5.1.2 | INTEGER | read-write | VCI associated with the VCB. |
| INT atmStreamVpi | 1.3.6.1.4.1.4962.2.1.5.5.1.1 | INTEGER | read-write | VPI associated with the ATM Stream |
| common | 1.3.6.1.4.1.4962.1 | |||
| connectionPidEntry | 1.3.6.1.4.1.4962.2.1.5.15.1 | not-accessible | This entry has the connection index for the given pid in the specified program & stream object. If the ConnectionIndex is zero, connectionPidIndex will return first connection object for this association. | |
| INT connectionPidIndex | 1.3.6.1.4.1.4962.2.1.5.15.1.1 | INTEGER | read-only | Returns an active connection object index connected to/from the given pid index. |
| connectionPidTable | 1.3.6.1.4.1.4962.2.1.5.15 | not-accessible | Connection pid table is used to traverse the pid connections. | |
| connectionProgEntry | 1.3.6.1.4.1.4962.2.1.5.14.1 | not-accessible | This entry has the connection index for the given program in the specified stream object. If the ConnectionIndex is zero, connectionProgIndex will return first conneciton object for this association. | |
| INT connectionProgIndex | 1.3.6.1.4.1.4962.2.1.5.14.1.1 | INTEGER | read-only | Returns an active connection object index connected to/from the given program index. |
| connectionProgTable | 1.3.6.1.4.1.4962.2.1.5.14 | not-accessible | Connection Prog table is used to traverse the program connections. | |
| connectionStreamEntry | 1.3.6.1.4.1.4962.2.1.5.13.1 | not-accessible | This entry has the connection index for the associated stream. If the ConnectionIndex is zero, connectionStreamIndex will return first connection object for this association. | |
| INT connectionStreamIndex | 1.3.6.1.4.1.4962.2.1.5.13.1.1 | INTEGER | read-only | Returns an active connection object index connected to/from the given stream index. |
| connectionStreamTable | 1.3.6.1.4.1.4962.2.1.5.13 | not-accessible | Connection Stream table is used to traverse the stream connections. | |
| crossStream | 1.3.6.1.4.1.4962.2.1 | |||
| INT cstrm3VCoreVoltage | 1.3.6.1.4.1.4962.2.1.4.6 | INTEGER | read-only | The voltage in 1/100ths of a volt of the 3.3 volt core regulator. |
| INT cstrm3VIOVoltage | 1.3.6.1.4.1.4962.2.1.4.7 | INTEGER | read-only | The voltage in 1/100ths of a volt of the 3.3 volt I/O regulator. |
| INT cstrm3VRegTemp | 1.3.6.1.4.1.4962.2.1.4.3 | INTEGER | read-only | The case temperature in degrees Centigrade of the 3.3 volt voltage regulator I.C. |
| INT cstrm5VCoreVoltage | 1.3.6.1.4.1.4962.2.1.4.5 | INTEGER | read-only | The voltage in 1/100ths of a volt of the 5 volt core regulator. |
| NTF cstrmActDeActTrap | 1.3.6.1.4.1.4962.2.1.3.0.8 | This Trap is generated for each of Activate and Deactivate event Alarm. | ||
| INT cstrmActDeActTrapID | 1.3.6.1.4.1.4962.2.1.6.5 | INTEGER | not-accessible | |
| INT cstrmActDeActTrapStatus | 1.3.6.1.4.1.4962.2.1.6.5.1 | INTEGER | not-accessible | |
| INT cstrmAirTemp | 1.3.6.1.4.1.4962.2.1.4.1 | INTEGER | read-only | The ambient temperature in degrees Centigrade at the center of the main logic board. |
| NTF cstrmATMPhyTrap | 1.3.6.1.4.1.4962.2.1.3.0.4 | |||
| INT cstrmATMPhyTrapID | 1.3.6.1.4.1.4962.2.1.6.1 | INTEGER | not-accessible | |
| INT cstrmATMPhyTrapStatus | 1.3.6.1.4.1.4962.2.1.6.1.1 | INTEGER | not-accessible | |
| cstrmConnEntry | 1.3.6.1.4.1.4962.2.1.5.12.1 | not-accessible | An cstrmConnEntry contains source program, source pid, dest program dest pid and asiStreamIndex values. This is the entry through which management station connect source programs to destination programs. | |
| INT cstrmConnIndex | 1.3.6.1.4.1.4962.2.1.5.12.1.1 | INTEGER | read-only | Index to identify a Connection Table. |
| INT cstrmConnNextIndex | 1.3.6.1.4.1.4962.2.1.5.11 | INTEGER | read-only | Returns the next free Index in the connection table. |
| CON cstrmConnStatus | 1.3.6.1.4.1.4962.2.1.5.12.1.9 | ConnectionStatus | read-write | Status of the this connection table. |
| cstrmConnTable | 1.3.6.1.4.1.4962.2.1.5.12 | not-accessible | A list of Dipersal Entries.. | |
| cstrmControl | 1.3.6.1.4.1.4962.2.1.1 | |||
| NTF cstrmCoolFail | 1.3.6.1.4.1.4962.2.1.3.0.2 | A cstrmCoolFail trap signifies that a cooling system failure has occured. | ||
| INT cstrmCoreRegTemp | 1.3.6.1.4.1.4962.2.1.4.2 | INTEGER | read-only | The case temperature in degrees Centigrade of the Core 5 volt voltage regulator I.C. |
| cstrmDiags | 1.3.6.1.4.1.4962.2.1.4 | |||
| cstrmEvents | 1.3.6.1.4.1.4962.2.1.3 | |||
| INT cstrmHotICTemp | 1.3.6.1.4.1.4962.2.1.4.4 | INTEGER | read-only | The case temperature in degrees Centigrade of the designated hottest I.C. on the main board. |
| cstrmInfo | 1.3.6.1.4.1.4962.2.1.2 | |||
| NTF cstrmIngressPidsChangedTrap | 1.3.6.1.4.1.4962.2.1.3.0.9 | This Trap is generated for each of Activate and Deactivate event Alarm. | ||
| INT cstrmIngressPidsChangedTrapID | 1.3.6.1.4.1.4962.2.1.6.6 | INTEGER | not-accessible | |
| INT cstrmIngressPidsChangedTrapStatus | 1.3.6.1.4.1.4962.2.1.6.6.1 | INTEGER | not-accessible | |
| NTF cstrmOAMVCTrap | 1.3.6.1.4.1.4962.2.1.3.0.6 | |||
| INT cstrmOAMVCTrapID | 1.3.6.1.4.1.4962.2.1.6.2 | INTEGER | not-accessible | |
| INT cstrmOAMVCTrapStatus | 1.3.6.1.4.1.4962.2.1.6.2.1 | INTEGER | not-accessible | |
| NTF cstrmOAMVPTrap | 1.3.6.1.4.1.4962.2.1.3.0.5 | |||
| INT cstrmOAMVPTrapID | 1.3.6.1.4.1.4962.2.1.6.3 | INTEGER | not-accessible | |
| INT cstrmOAMVPTrapStatus | 1.3.6.1.4.1.4962.2.1.6.3.1 | INTEGER | not-accessible | |
| NTF cstrmOverTemp | 1.3.6.1.4.1.4962.2.1.3.0.1 | A cstrmOverTemp trap signifies that one or more of the temperature sensors has exceeded its high threshhold level. The values of the 4 temperature sensors are sent in Degrees Celsius with the trap. | ||
| NTF cstrmPowerMonitor | 1.3.6.1.4.1.4962.2.1.3.0.3 | A cstrmPowerMonitor trap signifies that one or more of the voltage sensors is out of acceptable range. The values of the 3 voltage sensors are sent in 100ths of milivolts. | ||
| NTF cstrmSONETTrap | 1.3.6.1.4.1.4962.2.1.3.0.7 | |||
| INT cstrmSONETTrapID | 1.3.6.1.4.1.4962.2.1.6.4 | INTEGER | not-accessible | |
| INT cstrmSONETTrapStatus | 1.3.6.1.4.1.4962.2.1.6.4.1 | INTEGER | not-accessible | |
| cstrmStreamGroup | 1.3.6.1.4.1.4962.2.1.5 | |||
| cstrmStreamPrivate | 1.3.6.1.4.1.4962.2.1.6 | |||
| device | 1.3.6.1.4.1.4962.1.1 | |||
| STR deviceFwVer | 1.3.6.1.4.1.4962.1.1.4 | DisplayString | read-only | Firmware version of the product in major.minor form |
| IP deviceGwAddress | 1.3.6.1.4.1.4962.1.1.10 | IpAddress | read-write | This object returns the default gateway address of the device when read and modifies the default gateway when set. |
| IP deviceHostAddress | 1.3.6.1.4.1.4962.1.1.11 | IpAddress | read-write | This object has the host (TFTP) server ip address which is used for software upgrade. |
| STR deviceHwVer | 1.3.6.1.4.1.4962.1.1.5 | DisplayString | read-only | Hardware version of the product in major.minor form |
| IP deviceIpAddress | 1.3.6.1.4.1.4962.1.1.8 | IpAddress | read-write | This object returns the current IP address of the device when read and modifies the IP address to the new value when set. |
| IP deviceIpNetmask | 1.3.6.1.4.1.4962.1.1.9 | IpAddress | read-write | This object returns the netmask of the interface when read and modifies the netmask when set. |
| STR deviceModelNum | 1.3.6.1.4.1.4962.1.1.3 | DisplayString | read-only | Model Number of the device. |
| STR deviceName | 1.3.6.1.4.1.4962.1.1.1 | DisplayString | read-only | Name of the Artel's Product |
| INT deviceReset | 1.3.6.1.4.1.4962.1.1.12 | INTEGER | read-write | Always returns '0' when read and resets the device when set with a nonzero value |
| STR deviceSerialNum | 1.3.6.1.4.1.4962.1.1.2 | DisplayString | read-only | Serial number of the device. |
| STR deviceTime | 1.3.6.1.4.1.4962.1.1.6 | DisplayString | read-write | The current time as measured by the device. The time is specified as YYYYMMDDHHMM, where YYYY - four digits of the year MM - month (01 through 12) DD - day of month(01 through 31) HH - hours(00 through 23) MM - minutes(00 through 59) |
| STR deviceUpTime | 1.3.6.1.4.1.4962.1.1.7 | DisplayString | read-only | The time when the device is intialized. The time is specified as YYYYMMDDHHMM, where YYYY - four digits of the year MM - month (01 through 12) DD - day of month(01 through 31) HH - hours(00 through 23) MM - minutes(00 through 59). |
| INT egressPidNum | 1.3.6.1.4.1.4962.2.1.5.12.1.7 | INTEGER | read-write | Destination PID number associated with the connection table. Destination PID number is linked to an egress stream. |
| INT egressProgNum | 1.3.6.1.4.1.4962.2.1.5.12.1.6 | INTEGER | read-write | Destination program number associated with the connection table. Destination program number is linked to an egress stream. |
| STR egressState | 1.3.6.1.4.1.4962.2.1.5.2.1.3 | StreamState | read-write | This object specifies the status of the stream in egress direction. |
| INT egressStreamBufSize | 1.3.6.1.4.1.4962.2.1.5.4.1.4 | INTEGER | read-write | Size of each buffer allocated in egress pool. |
| INT egressStreamBufThreshold | 1.3.6.1.4.1.4962.2.1.5.4.1.3 | INTEGER | read-write | Specifies the uniform dealy threshold for this egress stream. |
| egressStreamEntry | 1.3.6.1.4.1.4962.2.1.5.4.1 | not-accessible | An egress entry specifies the transport stream rate, buffer control parameters, elasticity table parameters, divisor for center rate of elasticity window. | |
| INT egressStreamIndexVal | 1.3.6.1.4.1.4962.2.1.5.12.1.3 | INTEGER | read-write | Index of the egress stream |
| INT egressStreamJitter | 1.3.6.1.4.1.4962.2.1.5.4.1.5 | INTEGER | read-write | Enable/disable Jitter Attenuation for this egress stream. |
| INT egressStreamNumBufs | 1.3.6.1.4.1.4962.2.1.5.4.1.2 | INTEGER | read-write | Number of buffers to be allocated for this egress stream. Setting this '0' to will deallocate the memory. Modify this value to change the number of buffers from current value. |
| egressStreamTable | 1.3.6.1.4.1.4962.2.1.5.4 | not-accessible | This table contains egress stream configuration parameters, one entry per streamTable for which streamDirection is egress. | |
| INT egressStreamTsRate | 1.3.6.1.4.1.4962.2.1.5.4.1.1 | INTEGER | read-write | Transport rate for this egress stream. |
| INT ingressPidIndex | 1.3.6.1.4.1.4962.2.1.5.12.1.5 | INTEGER | read-write | Source PID number associated with the connection table. Source PID number is linked to an ingress stream. A value of 'zero' indicates that all pids in the parent program are connected to the egress stream. |
| INT ingressProgIndex | 1.3.6.1.4.1.4962.2.1.5.12.1.4 | INTEGER | read-write | Source program number associated with the connection table. Source program number is linked to an ingress stream. A value of 'zero' indicates that all programs in the parent stream are connected to the egress stream. |
| STR ingressState | 1.3.6.1.4.1.4962.2.1.5.2.1.2 | StreamState | read-write | This object specifies the status of the stream in ingress direction. The ingressState can be set to only 'inactive' by the management station. It is automatically set to 'active' by the agent when a valid connection is established. |
| INT ingressStreamCellRate | 1.3.6.1.4.1.4962.2.1.5.3.1.1 | INTEGER | read-write | Specifies the cellrate of the ingress stream. |
| ingressStreamEntry | 1.3.6.1.4.1.4962.2.1.5.3.1 | not-accessible | An ingress entry specifies the cell rate of the stream. | |
| INT ingressStreamIndexVal | 1.3.6.1.4.1.4962.2.1.5.12.1.2 | INTEGER | read-write | Index of the ingress stream. |
| ingressStreamTable | 1.3.6.1.4.1.4962.2.1.5.3 | not-accessible | This table contains ingress stream configuration parameters, one entry per streamTable for which streamDirection is ingress. | |
| INT maxAsiStreamsNumber | 1.3.6.1.4.1.4962.2.1.2.6 | INTEGER | read-only | Max number of available ASI Transport Streams available in the system |
| INT maxAtmStreamsNumber | 1.3.6.1.4.1.4962.2.1.2.3 | INTEGER | read-only | Max number of available Transport Streams available in the system |
| INT maxConnectionsNumber | 1.3.6.1.4.1.4962.2.1.2.14 | INTEGER | read-only | Max number of available connection objects. |
| INT maxPidsNumber | 1.3.6.1.4.1.4962.2.1.2.12 | INTEGER | read-only | Max number of available PIDs in the system |
| INT maxProgsNumber | 1.3.6.1.4.1.4962.2.1.2.9 | INTEGER | read-only | Max number of programs available in the system |
| INT pcrAdjust | 1.3.6.1.4.1.4962.2.1.5.12.1.8 | INTEGER | read-write | Enable/Disable PCR Time Stamp Adjustment for this connection. |
| pidEntry | 1.3.6.1.4.1.4962.2.1.5.10.1 | not-accessible | pidEntry contains pid number, remap pid number, table identifier, pid transport rate. | |
| INT pidIndex | 1.3.6.1.4.1.4962.2.1.5.10.1.1 | INTEGER | read-only | A unique integer pid Handle identifying a PID. |
| pidNextEntry | 1.3.6.1.4.1.4962.2.1.5.9.1 | not-accessible | This entry contains next pid index that can by used by the mangement stations to add a pid to the given stream and program. | |
| INT pidNextIndex | 1.3.6.1.4.1.4962.2.1.5.9.1.1 | INTEGER | read-only | Returns an index that can be associated with the given stream and program. The value '0' indicates taht no assigned values are available. After each retrieval operation from management station, agent should modify this to next unassigned index. |
| pidNextTable | 1.3.6.1.4.1.4962.2.1.5.9 | not-accessible | To create a new entry pidTable, management stations has to first retrieve a next available pid index. | |
| INT pidNumber | 1.3.6.1.4.1.4962.2.1.5.10.1.2 | INTEGER | read-write | pid number which uniquely identifies a PID in a program. |
| INT pidRate | 1.3.6.1.4.1.4962.2.1.5.10.1.4 | INTEGER | read-write | Tranport rate of a specific PID. |
| CON pidStatus | 1.3.6.1.4.1.4962.2.1.5.10.1.5 | ConnectionStatus | read-write | The status of this PID. |
| pidTable | 1.3.6.1.4.1.4962.2.1.5.10 | not-accessible | List of pids linked to one program. The number of entries is given by numPIDs. | |
| INT pidTableID | 1.3.6.1.4.1.4962.2.1.5.10.1.3 | INTEGER | read-write | table type identifier of this PID. This is 0 - Program Association Table 1 - Program MAP Table 2 - PCR PID >2 - Check the manual. |
| products | 1.3.6.1.4.1.4962.2 | |||
| progEntry | 1.3.6.1.4.1.4962.2.1.5.8.1 | not-accessible | progEntry contains program number, program name, TS rate, TS len. | |
| INT progIndex | 1.3.6.1.4.1.4962.2.1.5.8.1.1 | INTEGER | read-only | A unique handle which identies a program. |
| STR progName | 1.3.6.1.4.1.4962.2.1.5.8.1.3 | DisplayString | read-write | Human readable program name corresponding to the program number of this entry. |
| progNextEntry | 1.3.6.1.4.1.4962.2.1.5.7.1 | not-accessible | This entry contains next program index that can by used by the management stations to add a program in a stream. | |
| INT progNextIndex | 1.3.6.1.4.1.4962.2.1.5.7.1.1 | INTEGER | read-only | Returns an index that can be associated with the given stream. The value '0' indicates that no assigned values are available. After each retrieval operation from management station, agent should modify this to next unassigned index. |
| progNextTable | 1.3.6.1.4.1.4962.2.1.5.7 | not-accessible | To create a new entry in progTable, management station has to first get next program index. | |
| INT progNumber | 1.3.6.1.4.1.4962.2.1.5.8.1.2 | INTEGER | read-write | Program number which identifies a program in a VCB. |
| CON progStatus | 1.3.6.1.4.1.4962.2.1.5.8.1.6 | ConnectionStatus | read-write | Status of this program associated with the VCB. |
| progTable | 1.3.6.1.4.1.4962.2.1.5.8 | not-accessible | A list of programs linked to one VCB. The number of entries is given by numProgs. | |
| INT progTsLen | 1.3.6.1.4.1.4962.2.1.5.8.1.5 | INTEGER | read-write | Length of the transport stream packet. |
| INT progTsRate | 1.3.6.1.4.1.4962.2.1.5.8.1.4 | INTEGER | read-write | Aggregate tranport rate of the program. |
| streamEntry | 1.3.6.1.4.1.4962.2.1.5.2.1 | not-accessible | An entry in the stream table. This entry is used to specify the stream type, stream direction and stream status. | |
| INT streamIndex | 1.3.6.1.4.1.4962.2.1.5.2.1.1 | INTEGER | read-only | A unique integer handle that identifies a stream. |
| STR streamName | 1.3.6.1.4.1.4962.2.1.5.2.1.5 | DisplayString | read-write | This object specifies the name of the stream. |
| INT streamNextIndex | 1.3.6.1.4.1.4962.2.1.5.1 | INTEGER | read-only | To create a new entry in streamTable, management station has to first get this object value. The value 0 indicates that no assigned values are available. After each retrieval operation from management stations, agent should modify this to next unassigned index. |
| CON streamStatus | 1.3.6.1.4.1.4962.2.1.5.2.1.6 | ConnectionStatus | read-write | This object specifies the status of stream entry. |
| streamTable | 1.3.6.1.4.1.4962.2.1.5.2 | not-accessible | A list of stream entries. An entry specifies the stream type, name and direction. It doesn't included stream specific parameters. | |
| STR streamType | 1.3.6.1.4.1.4962.2.1.5.2.1.4 | StreamType | read-write | This object specifies the type of the stream. |
| INT usedAsiStreamsNumber | 1.3.6.1.4.1.4962.2.1.2.4 | INTEGER | read-only | Currently used number of total available ASI Tranport streams. This includes active and inactive streams |
| INT usedAtmStreamsNumber | 1.3.6.1.4.1.4962.2.1.2.1 | INTEGER | read-only | Currently used number of total available Tranport streams. This includes active and inactive streams |
| INT usedConnectionsNumber | 1.3.6.1.4.1.4962.2.1.2.13 | INTEGER | read-only | Currently used number of total available connection objects. |
| INT usedPidsNumber | 1.3.6.1.4.1.4962.2.1.2.10 | INTEGER | read-only | Currently used number of total available PIDs. This includes active and inactive PIDs |
| INT usedProgsNumber | 1.3.6.1.4.1.4962.2.1.2.7 | INTEGER | read-only | Currently used number of programs. This includes active and inactive programs |
| INT vsarConfigAction | 1.3.6.1.4.1.4962.2.1.1.2.1.4 | INTEGER | read-write | This specifies the action to be peformed on the configuration entry. When set is given with 'load' as action the device is loaded with the specified configuration type. If a set is given with 'store' as action, current configuration of the device is stored in the specified configuartion type. |
| vsarConfigEntry | 1.3.6.1.4.1.4962.2.1.1.2.1 | not-accessible | This entry contains configurationType, action specifying load/ store. | |
| INT vsarConfigIndex | 1.3.6.1.4.1.4962.2.1.1.2.1.1 | INTEGER | read-only | The index which points to the different VSAR configurations. |
| vsarConfigTable | 1.3.6.1.4.1.4962.2.1.1.2 | not-accessible | This table contains a list of configuration entries which can be loaded to VSAR chip or store current configuration to non volatile memory. | |
| INT vsarConfigType | 1.3.6.1.4.1.4962.2.1.1.2.1.2 | INTEGER | read-only | Configuration type can specify NVRAM configuration, Flash configuration etc. |
| INT vsarReset | 1.3.6.1.4.1.4962.2.1.1.1 | INTEGER | read-write | Setting this object to 1 resets the VSAR chip and initializes the VSAR control structures by reading from NVRAM. |
RFC description
Vendor-specific MIB for Crossstream network equipment; defines objects for traffic engineering and QoS management.
Start monitoring Artel Video Systems CrossStream video-transport device with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.