All MIBs › CPE-MANAGER
Organization: Zhone Technologies, Inc.
Last Updated: 2011-05-13
Category: Device Management
Description: Provides CPE device management objects for remote provisioning and monitoring of customer premises equipment.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CPE-MANAGER?
CPE-MANAGER is Zhone Technologies' MIB for its CPE Configuration Manager, also called Zero Touch Configuration, running on Zhone central-office (CO) equipment to automatically provision and track customer-premises equipment (CPE) at the far end of access links. Per its module description, it maintains a database correlating each link with the software version and configuration expected for the CPE connected at that link's far end, so the category of data it exposes is provisioning/configuration-state rather than raw traffic counters. Its monitoring relevance is centered on software status: it is explicitly designed to verify that a connected CPE is running the correct software version and configuration, meaning an operator (or the CO system itself) can detect a CPE that has drifted to an outdated firmware version or an incorrect configuration profile. No specific dependency on other MIBs is evident from the available text, though it inherently interacts with whatever line/access MIB represents the physical link to each CPE. It is deployed in DSL/access-network central offices using Zhone CO equipment, where zero-touch provisioning of remote CPE units is required at scale. Engineers can download the CPE-MANAGER file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CPE-MANAGER. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Zhone Technologies CO (central office) access equipment
- Zhone-managed CPE (customer premises equipment)
Monitoring Examples
No sample object/table names were provided for this module, so a concrete real-identifier walkthrough can't be given honestly here. Based on the module description, the expected use is for the CO system to check, per subscriber link, whether the attached CPE's reported software version and configuration match the version/configuration recorded in the CPE Manager's database, flagging any link where the CPE has fallen out of compliance (e.g., after a firmware rollback or unauthorized reconfiguration) so it can trigger automatic reprovisioning.
What Can Be Monitored
- CPE software version compliance
- CPE configuration compliance
- per-link CPE-to-configuration correlation
- provisioning/zero-touch status
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| ifIndex | OBJECT-TYPE |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| MacAddress | |
| TruthValue |
From ZHONE-SYSTEM-MIB
| cpeMgr | OBJECT-IDENTITY |
From Zhone-TC
| ZhoneRowStatus |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| I32 cpeCfgMgrBaseProtocolPort | 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.2 | Integer32 | read-write | Base protocol port used for NAT/PAT access of this CPE via the CO device. |
| cpeCfgMgrClientCompliance | 1.3.6.1.4.1.5504.3.1.21.1.3.2.2.1 | CPE Config Compliance. | ||
| cpeCfgMgrClientCompliances | 1.3.6.1.4.1.5504.3.1.21.1.3.2.2 | CPE Configuration Manager Client compliances. | ||
| NTF cpeCfgMgrClientConfigBackupDone | 1.3.6.1.4.1.5504.3.1.21.1.3.0.9 | Trap sent by a CPE when the upload of a configuration file initiated by CPE Config Manager completes successfully. | ||
| NTF cpeCfgMgrClientConfigBackupFailed | 1.3.6.1.4.1.5504.3.1.21.1.3.0.7 | Trap sent by a CPE when the upload of a configuration file initiated by CPE Config Manager fails. | ||
| NTF cpeCfgMgrClientConfigDownloadFailed | 1.3.6.1.4.1.5504.3.1.21.1.3.0.5 | Trap sent by a CPE when the download of a configuration file initiated by CPE Config Manager fails. | ||
| NTF cpeCfgMgrClientConfigUpdateFailed | 1.3.6.1.4.1.5504.3.1.21.1.3.0.6 | Trap sent by a CPE when updating to a configuration file required by CPE Config Manager fails. | ||
| cpeCfgMgrClientConformance | 1.3.6.1.4.1.5504.3.1.21.1.3.2 | CPE Configuration Manager Client Conformance. | ||
| cpeCfgMgrClientCoObjects | 1.3.6.1.4.1.5504.3.1.21.1.3.1.5 | CPE Configuration Manager Client CO Objects. | ||
| OCT cpeCfgMgrClientCurrentSwVersion | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.3 | OCTET STRING | read-only | A text string containing the currently running software image version. This string is reported to the CO via DHCP for CPE Config Manager support. |
| OCT cpeCfgMgrClientCurrentWebUIVersion | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.4 | OCTET STRING | read-only | A text string containing the currently installed WebUI version. This string is reported to the CO via DHCP for CPE Config Manager support. |
| cpeCfgMgrClientDownloadServerObjects | 1.3.6.1.4.1.5504.3.1.21.1.3.1.4 | CPE Configuration Manager Download Server Objects. | ||
| OCT cpeCfgMgrClientDwnldSpecificPath | 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.6 | OCTET STRING | read-write | The specific path location on the download server where CPE specific files are available. This path is a sub-path of the base path. The total path is a concatenation of the two strings as follows: / |
| OCT cpeCfgMgrClientDwnldSrvrBasePath | 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.5 | OCTET STRING | read-write | The base path location on the download server where update files are available. |
| IP cpeCfgMgrClientDwnldSrvrIP | 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.1 | IpAddress | read-write | The IP address of the server hosting files for download by CPEs. This will likely be the ZMS server. |
| OCT cpeCfgMgrClientDwnldSrvrPassword | 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.3 | OCTET STRING | read-write | Password the CPE uses when downloading files from the download server. |
| INT cpeCfgMgrClientDwnldSrvrSecureMode | 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.4 | INTEGER | read-write | The desired security mode to use for downloading files. It can be one of three values: 1 = do not use secure download methods (use ftp or tftp), 2 = use secure download methods (sftp), 3 = no preference. |
| OCT cpeCfgMgrClientDwnldSrvrUsername | 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.2 | OCTET STRING | read-write | Username the CPE uses when downloading files from the download server. |
| OCT cpeCfgMgrClientErrorDescription | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.2 | OCTET STRING | read-only | Textual description of the most recent error that may have occurred while downloading a file, upgrading the software, updating the configuration, or backing up the configuration for this CPE. |
| INT cpeCfgMgrClientForceUpdate | 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.6 | INTEGER | read-write | Writable object causing the immediate update of the CPE. After initiating the requested update, this field reverts to the 'none' state. renewDhcp - Simply restarts the DHCP handshake. This could cause an update if the configuration on the CO device has changed. updateConfig - This resets any previous configuration information and restarts the DHCP handshake. This has the effect of forcing a download and install of the configuration file even if it was the same as the previously installed file. |
| OCT cpeCfgMgrClientFSAN | 1.3.6.1.4.1.5504.3.1.21.1.3.1.1.3 | OCTET STRING | read-only | A string containing the FSAN value of this CPE. The FSAN is a string of ASCII decimal digits representing the vendor-specific portion of the onu serial number in hex format |
| cpeCfgMgrClientGroups | 1.3.6.1.4.1.5504.3.1.21.1.3.2.1 | CPE Configuration Manager Client conformance groups. | ||
| cpeCfgMgrClientIdObjects | 1.3.6.1.4.1.5504.3.1.21.1.3.1.1 | CPE Configuration Manager Client Identity Objects. | ||
| OCT cpeCfgMgrClientLastDwnldSrvrBasePath | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.6 | OCTET STRING | read-only | A text string containing the download server base path most recently used for uploading or downloading files for CPE Config Manager. This string is reported to the CO for config file validation. |
| OCT cpeCfgMgrClientLastDwnldSrvrSpecificPath | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.7 | OCTET STRING | read-only | A text string containing the download server specific path most recently used for uploading or downloading files for CPE Config Manager. This string is reported to the CO for config file validation. |
| OCT cpeCfgMgrClientLastInstalledConfigFile | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.5 | OCTET STRING | read-only | A text string containing the configuration filename most recently installed by CPE Config Manager. This string is reported to the CO via DHCP for CPE Config Manager support. |
| NTF cpeCfgMgrClientLevelReady | 1.3.6.1.4.1.5504.3.1.21.1.3.0.8 | Trap sent by a CPE reporting its configuration level after it has completed all updates available from CPE Config Manager. | ||
| MAC cpeCfgMgrClientMacAddress | 1.3.6.1.4.1.5504.3.1.21.1.3.1.1.4 | MacAddress | read-only | The MAC address used by this CPE on the cpe-mgr interface. |
| cpeCfgMgrClientNotifications | 1.3.6.1.4.1.5504.3.1.21.1.3.0 | CPE Configuration Manager Client notifications. | ||
| cpeCfgMgrClientNotificationsGroup | 1.3.6.1.4.1.5504.3.1.21.1.3.2.1.2 | Notifications from a CPE being managed by CPE Config manager. | ||
| cpeCfgMgrClientObjectGroup | 1.3.6.1.4.1.5504.3.1.21.1.3.2.1.1 | These objects are required for CPEs supporting CPE Configuration Manager controls. | ||
| cpeCfgMgrClientObjects | 1.3.6.1.4.1.5504.3.1.21.1.3.1 | CPE Configuration Manager Client Objects. | ||
| OCT cpeCfgMgrClientReceivedGenericCfgFilename | 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.4 | OCTET STRING | read-write | A string specifying the generic config filename for this CPE. The CPE must download this file if the reportedCpeConfigFilename it reported to the CO device doesn't exactly match either the requiredCpeGenericConfigFile in the cpeConfigMgrEntry or the cpeSpecificConfigFile in the cpeConfigMgrMemberEntry, and either no cpeCfgMgrClientReceivedSpecificCfgFilename was received from the CO or the download or use of the specific config file fails. |
| OCT cpeCfgMgrClientReceivedSpecificCfgFilename | 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.5 | OCTET STRING | read-write | A string specifying the specific config filename for this CPE. The CPE must download this file if the reportedCpeConfigFilename it reported to the CO device doesn't exactly match the cpeSpecificConfigFile in the cpeConfigMgrMemberEntry. |
| OCT cpeCfgMgrClientReceivedSwFilename | 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.2 | OCTET STRING | read-write | A string specifying the software filename the CPE must download. The CPE will be required to download this file when the reportedCpeSoftwareVersion it reported to the CO device does not exactly match the requiredCpeSoftwareVersion in the cpeConfigMgrEntry. |
| OCT cpeCfgMgrClientReceivedWebUIFilename | 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.3 | OCTET STRING | read-write | A string specifying the WebUI filename the CPE must download. The CPE will be required to download this file when the reportedCpeWebUIVersion it reported to the CO device does not exactly match the requiredCpeWebUIVersion in the cpeConfigMgrEntry. |
| OCT cpeCfgMgrClientRegistrationID | 1.3.6.1.4.1.5504.3.1.21.1.3.1.1.2 | OCTET STRING | read-only | The registration ID of this CPE. |
| BIT cpeCfgMgrClientRequiredUpdates | 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.1 | Bits | read-write | This field indicates the current list of required updates this CPE needs to complete. The 'backup' bit tells the CPE to generate a config backup of the running config to the download storage area. software(0): Software image file must be updated. webUI(1): WebUI file must be updated. config(2): Config file must be updated. backup(3): CPE must backup its running config |
| OCT cpeCfgMgrClientSerialNumber | 1.3.6.1.4.1.5504.3.1.21.1.3.1.1.1 | OCTET STRING | read-only | The serial number of this CPE. |
| NTF cpeCfgMgrClientSoftwareDownloadFailed | 1.3.6.1.4.1.5504.3.1.21.1.3.0.1 | Trap sent by a CPE when the download of the software image initiated by CPE Config Manager fails. | ||
| NTF cpeCfgMgrClientSoftwareInstallFailed | 1.3.6.1.4.1.5504.3.1.21.1.3.0.2 | Trap sent by a CPE when the installation of the software image as required by CPE Config Manager fails. | ||
| INT cpeCfgMgrClientState | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.1 | INTEGER | read-only | Current status of CPE Config Manager operations on this CPE. |
| cpeCfgMgrClientStatusObjects | 1.3.6.1.4.1.5504.3.1.21.1.3.1.2 | CPE Configuration Manager Client Status Objects. | ||
| OCT cpeCfgMgrClientSysName | 1.3.6.1.4.1.5504.3.1.21.1.3.1.1.5 | OCTET STRING | read-only | Read only access to the sysName of this CPE. |
| cpeCfgMgrClientUpdateObjects | 1.3.6.1.4.1.5504.3.1.21.1.3.1.3 | CPE Configuration Manager Client Update Objects. | ||
| NTF cpeCfgMgrClientWebUIDownloadFailed | 1.3.6.1.4.1.5504.3.1.21.1.3.0.3 | Trap sent by a CPE when the download of the WebUI file initiated by CPE Config Manager fails. | ||
| NTF cpeCfgMgrClientWebUIInstallFailed | 1.3.6.1.4.1.5504.3.1.21.1.3.0.4 | Trap sent by a CPE when the installation of the WebUI file required by CPE Config Manager fails. | ||
| U32 cpeCfgMgrConcurrentUpdateLimit | 1.3.6.1.4.1.5504.3.1.21.1.1.1.3 | Unsigned32 | read-write | The number of CPEs that can be granted the short lease IP with required updates by this CO device before an update storm is declared. Since downloads and uploads of files from a CPE will be NAT/PAT'ed at the CO CPU, too many at one time can impact CO performance. This field provides for tuning this performance as the local environment allows. |
| T/F cpeCfgMgrDwnldSrvrDefault | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.6 | TruthValue | read-create | Indicates this download server is used as the default download server when creating cpeConfigMgrEntry's. This is only used during config time, and not during runtime. If set to TRUE, and a new cpeConfigMgrEntry is created that does not specify a cpeConfigMgrDwnldSrvrToUsed value, then the index of this instance will be used. |
| U32 cpeCfgMgrDwnldSrvrIndex | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.2 | Unsigned32 | read-create | Unique number used to identify this download server instance. This field is the table index. |
| IP cpeCfgMgrDwnldSrvrIP | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.3 | IpAddress | read-create | The IP address of the server hosting update files available to CPEs. This server must support the file transfer methods required by the CPEs (ftp or sftp) for both upload and download. |
| OCT cpeCfgMgrDwnldSrvrPassword | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.5 | OCTET STRING | read-create | Password the CPE uses when accessing files on the download server. |
| ZHO cpeCfgMgrDwnldSrvrRowStatus | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.1 | ZhoneRowStatus | read-create | RowStatus object used to create an instance in this table. |
| OCT cpeCfgMgrDwnldSrvrUsername | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.4 | OCTET STRING | read-create | Username the CPE uses when accessing files on the download server. |
| OCT cpeCfgMgrInterfaceName | 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.6 | OCTET STRING | read-write | Interface name on the CO device connected to this CPE. |
| I32 cpeCfgMgrPort | 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.4 | Integer32 | read-write | Port identifier on the CO device slot connected to this CPE. |
| IP cpeCfgMgrPublicIPAddress | 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.1 | IpAddress | read-write | This is the Public side IP Address used by CPE Config Manager on the CO device. It is not necessarily the IP used by the CO to communicate with the CPE. |
| I32 cpeCfgMgrSlot | 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.3 | Integer32 | read-write | Slot identifier for the port on the CO device connected to this CPE. |
| I32 cpeCfgMgrSubport | 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.5 | Integer32 | read-write | Subport identifier on the CO device's port connected to this CPE. |
| cpeConfigMgr | 1.3.6.1.4.1.5504.3.1.21.1.2 | CPE Configuration Manager. | ||
| cpeConfigMgrClient | 1.3.6.1.4.1.5504.3.1.21.1.3 | CPE Configuration Manager Client. | ||
| NTF cpeConfigMgrClientDysfunctional | 1.3.6.1.4.1.5504.3.1.21.1.2.0.2 | Trap flagging a CPE as having repeated update errors. This means the listed CPE repeatedly attempted to perform an update and failed. At this point the CPE is granted a long lease time on its IP and no required updates. This will allow other CPEs an opportunity to update. | ||
| NTF cpeConfigMgrClientOperational | 1.3.6.1.4.1.5504.3.1.21.1.2.0.1 | Trap flagging a CPE as operational. This means the listed CPE did not need any image or configuration updates and was granted the operational lease time on its IP. | ||
| cpeConfigMgrCompliance | 1.3.6.1.4.1.5504.3.1.21.1.2.2.2.1 | The compliance statement for managed entities supporting CPE Configuration Manager. | ||
| cpeConfigMgrCompliances | 1.3.6.1.4.1.5504.3.1.21.1.2.2.2 | CPE Configuration Manager Compliances. | ||
| cpeConfigMgrConformance | 1.3.6.1.4.1.5504.3.1.21.1.2.2 | CPE Configuration Manager Conformance. | ||
| OCT cpeConfigMgrDownloadBasePath | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.14 | OCTET STRING | read-create | A string that specifies the directory path to the base location of configuration files on the download server for this cpeConfigMgr. This path location will contain the software image, webUI file, generic configuration file, and sub-paths to CPE specific files. This path is also used when checking the CPEs reported configuration with the required configuration for this CPE in CPE Config Manager. |
| INT cpeConfigMgrDownloadSecureMode | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.15 | INTEGER | read-create | The desired security mode to use for downloading files. It can be one of three values: 1 = do not use secure download methods (use ftp or tftp), 2 = use secure download methods (sftp) 3 = no preference, |
| cpeConfigMgrDownloadServerEntry | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1 | not-accessible | Entry defining a download server used by CPE Config Manager Member CPEs. | |
| cpeConfigMgrDownloadServerGroup | 1.3.6.1.4.1.5504.3.1.21.1.2.2.1.2 | Objects used to define a download server used by CPEs managed by CPE Configuration manager. | ||
| cpeConfigMgrDownloadServerTable | 1.3.6.1.4.1.5504.3.1.21.1.2.1.2 | not-accessible | Table defining download servers used by CPEs. | |
| U32 cpeConfigMgrDwnldSrvrToUsed | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.13 | Unsigned32 | read-create | Index of a cpeConfigMgrDownloadServerEntry containing the download server details this cpeConfigMgr passes to attached CPEs. This field must match an existing cpeCfgMgrDwnldSrvrIndex field. If it does not, no download server information will be sent to the CPE when needed. |
| cpeConfigMgrEntry | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1 | not-accessible | One CPE Configuration Manager. | |
| I32 cpeConfigMgrGroup | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.4 | Integer32 | read-create | The value of this field will be a simple integer defining a group of associated cpeConfigMgr's. All cpeConfigMgr's with the same group value form this association. This association allows the defining of multiple CPE type configurations for a given interface. Each cpeConfigMgrMember will be assigned to a cpeConfigMgrGroup. The attached CPE must be one of the types supported by this group, or an error will be logged and/or trapped. |
| U32 cpeConfigMgrGroupMembership | 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1.2 | Unsigned32 | read-create | This is the cpeConfigMgrGroup from the cpeConfigMgr table indicating which group this CPE is a member. This field is required and must point to a valid cpeConfigMgrGroup. |
| cpeConfigMgrGroups | 1.3.6.1.4.1.5504.3.1.21.1.2.2.1 | CPE Configuraiton Manager conformance groups. | ||
| I32 cpeConfigMgrIndex | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.2 | Integer32 | accessible-for-notify | Index to the cpeConfigMgrTable. |
| cpeConfigMgrMemberEntry | 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1 | not-accessible | One CPE associated with a defined CPE Configuration Manager. | |
| cpeConfigMgrMemberObjectGroup | 1.3.6.1.4.1.5504.3.1.21.1.2.2.1.3 | A unique set of objects connecting a CPE link to a CPE Config Manager, assigning a unique configuration to the CPE, and maintaining a configuration status. | ||
| ZHO cpeConfigMgrMemberRowStatus | 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1.1 | ZhoneRowStatus | read-create | The standard field for creating/destroying an entry via SNMP. |
| BIT cpeConfigMgrMemberStatus | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.1 | Bits | read-only | Status indication for the latest configuration of this CPE. Note, this field will change to Not compared each time any field in this profile or its parent cpeConfigMgr is modified. |
| cpeConfigMgrMemberStatusEntry | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1 | not-accessible | Runtime details of one CPE Config Manager Member. | |
| cpeConfigMgrMemberStatusTable | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4 | not-accessible | Table of runtime details of CPE Config Manager Members. | |
| cpeConfigMgrMemberTable | 1.3.6.1.4.1.5504.3.1.21.1.2.1.3 | not-accessible | The cpeConfigMgrMemberTable associates configured cpe-mgr interfaces with defined cpeConfigMgrEntrys. It also provides a means to associate a unique configuration file to the attached CPEs. This table is indexed by the cpeIfIndex field. | |
| T/F cpeConfigMgrMemberTrapsEnabled | 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1.5 | TruthValue | read-create | Enables or disables whether traps are sent from the CO device for events relating to this cpeConfigMgrMember. |
| NTF cpeConfigMgrMismatchConfigFile | 1.3.6.1.4.1.5504.3.1.21.1.2.0.6 | This trap from CPE Config Manager on a CO device is sent when the config filename reported by the CPE does not agree with either the cpeGenericConfigFile required by the cpeConfigMgr or the cpeSpecificConfigFile required by the cpeConfigMgrMember. The comparison of the generic config file includes matching the cpeConfigMgrDownloadBasePath with the base path reported by the CPE. The comparison of the specific config file included matching cpeConfigMgrDownloadBasePath with the base path reported by the CPE and matching cpeSpecificDownloadPath with the specific path reported by the CPE. | ||
| NTF cpeConfigMgrMismatchSoftwareVersion | 1.3.6.1.4.1.5504.3.1.21.1.2.0.4 | This trap from CPE Config Manager on a CO device is sent when the software version reported by the CPE does not agree with the software version required by the cpeConfigMgr. | ||
| NTF cpeConfigMgrMismatchType | 1.3.6.1.4.1.5504.3.1.21.1.2.0.3 | This trap from CPE Config Manager on a CO device is sent when a CPE's reportedCpeType does not match any cpeType's defined by cpeConfigMgr's of the same cpeConfigMgrGroup. This trap indicates a configuration error that needs attention. | ||
| NTF cpeConfigMgrMismatchWebUIVersion | 1.3.6.1.4.1.5504.3.1.21.1.2.0.5 | This trap from CPE Config Manager on a CO device is sent when the WebUI version reported by the CPE does not agree with the WebUI version required by the cpeConfigMgr | ||
| OCT cpeConfigMgrName | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.3 | OCTET STRING | read-create | This is an ASCII string containing the customer assigned name. Maximum length is 32 characters, and no whitespaces are allowed. |
| cpeConfigMgrNotifications | 1.3.6.1.4.1.5504.3.1.21.1.2.0 | CPE Config Manager Notifications. | ||
| cpeConfigMgrNotificationsObjectGroup | 1.3.6.1.4.1.5504.3.1.21.1.2.2.1.4 | Notifications for various cpeConfigMgr events and errors. | ||
| cpeConfigMgrObjectGroup | 1.3.6.1.4.1.5504.3.1.21.1.2.2.1.1 | A common set of objects used to maintain software version and generic configuration for a specific type of a group member CPE. | ||
| cpeConfigMgrObjects | 1.3.6.1.4.1.5504.3.1.21.1.2.1 | CPE Configuration Manager Objects. | ||
| ZHO cpeConfigMgrRowStatus | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.1 | ZhoneRowStatus | read-create | The standard field for creating/destroying an entry via SNMP. |
| cpeConfigMgrTable | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1 | not-accessible | The CPE Configuration Manager Table defines the common attributes applicable to a specific CPE type. There can be multiple cpeConfigMgrEntry's for each type of CPE to allow customers to define managed CPE groups specific to different end user requirements, versions and configurations. This table is indexed by a simple integer; however the user must define a text name for each entry for easier management and recognition. For most of these fields only rudimentary validation can be performed at the CO device. The accuracy of these fields is left up to the user. Note that a cpeConfigMgrEntry can not be deleted if any cpeConfigMgrMembers reference it. The members must be deleted first before the manager can be deleted. | |
| T/F cpeConfigMgrTrapsEnabled | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.16 | TruthValue | read-create | Enables or disables whether traps are sent from the CO device for events relating to this cpeConfigMgr. |
| NTF cpeConfigMgrUpdateError | 1.3.6.1.4.1.5504.3.1.21.1.2.0.7 | This trap from CPE Config Manager on a CO device is sent if it detects an update to a CPE failed. | ||
| I32 cpeConfigMgrUsed | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.2 | Integer32 | read-only | The index into the cpeConfigMgr table for the specific CPE Config Manager used. The cpeConfigMgr will be found based on matching the cpeCofnigMgrGroupMembership and reportedCpeType to the cpeConfigMgrGroup and managedCpeType fields in the cpeConfigMgr table. |
| U32 cpeConfigScriptIndex | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.17 | Unsigned32 | read-create | Index of the cpe-config-script profile used to provision CPEs associated with the manager. Note, the cpe-config-script profile may still be called a gpon-onu-omci-me-profile from which this method of provisioning was extrapolated. |
| U32 cpeConfigVarsIndex | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.18 | Unsigned32 | read-create | Index of the cpe-config-vars profile used to provision CPEs associated with the manager. The cpe-config-vars profile defines variables and their values used by the cpe-config-script. Note, the cpe-config-vars profile may still be called a gpon-onu-omci-generic-profile from which it is modeled after. |
| I32 cpeLeaseTimeOperational | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.12 | Integer32 | read-create | The long lease time (in seconds) granted to a CPE if there is no upgrade required. The default for this value will be one day. This value should be short enough to accommodate frequent checks for configuration changes, but not too frequent to burden the CO device. If this device repeatedly fails to successfully update, this long lease time may be issued with no required updates to allow other CPEs time to update. |
| I32 cpeLeaseTimeUpdate | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.11 | Integer32 | read-create | The short lease time (in seconds) granted to a CPE during download of files. This value is also used for throttling a download storms. The default value for this field will be 5 minutes. This value should be long enough to accommodate the maximum time to download all files a CPE may need. |
| cpeMgrGlobal | 1.3.6.1.4.1.5504.3.1.21.1.1 | Global objects used by CPE Manager. | ||
| cpeMgrGlobalCompliance | 1.3.6.1.4.1.5504.3.1.21.1.1.2.2.1 | The compliance statement for managed CPE Manager global entities. | ||
| cpeMgrGlobalCompliances | 1.3.6.1.4.1.5504.3.1.21.1.1.2.2 | CPE Manager Compliances. | ||
| cpeMgrGlobalConformance | 1.3.6.1.4.1.5504.3.1.21.1.1.2 | CPE Manager Global Objects Conformance. | ||
| cpeMgrGlobalGroup | 1.3.6.1.4.1.5504.3.1.21.1.1.2.1.1 | Global parameters used by the CPE Manager application. | ||
| cpeMgrGlobalGroups | 1.3.6.1.4.1.5504.3.1.21.1.1.2.1 | CPE Manager Global Conformance Groups. | ||
| cpeMgrGlobalObjects | 1.3.6.1.4.1.5504.3.1.21.1.1.1 | CPE Manager Global Objects. | ||
| U32 cpeMgrLocalSlanId | 1.3.6.1.4.1.5504.3.1.21.1.1.1.2 | Unsigned32 | read-write | Local SLAN ID used as the management SLAN between a CO device and locally managed CPEs. This SLAN should not be used for anything other than management traffic between the CO and CPEs. Once CPE management interfaces are created using this SLAN, it can not be changed. Also note, CPEs must be preprovisioned with a DHCP client on this SLAN for cpeMgr to operate correctly. |
| U32 cpeMgrLocalVlanId | 1.3.6.1.4.1.5504.3.1.21.1.1.1.1 | Unsigned32 | read-write | Local VLAN ID used as the management VLAN between a CO device and locally managed CPEs. This VLAN should not be used for anything other than management traffic between the CO and CPEs. Once CPE management interfaces are created using this VLAN, it can not be changed. Also note, CPEs must be preprovisioned with a DHCP client on this VLAN for cpeMgr to operate correctly. |
| cpeMgrModule | 1.3.6.1.4.1.5504.3.1.21.1 | The CPE Configuration Manager (a.k.a. Zero Touch Configuration) provides the ability for management software to automatically maintain CPE software version and boot time configuration on Zhone manufactured CPEs. To support this feature, Zhone CO equipment must maintain a database correlating a specified link with the required software version and configuration of the CPE at the far end of that link. This information is used to verify that the connected CPE is running the correct software image and is correctly configured. If it is not, the CPE will be automatically reconfigured to the correct software version and configuration as configured by these tables. | ||
| OCT cpeSpecificConfigFile | 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1.3 | OCTET STRING | read-create | A string defining the specific configuration filename for this CPE. The CPE must specify this filename to the CO device. If the names do not match exactly, the CO device will inform the CPE to download this file from the download server. This file must be available at the specific download path. |
| OCT cpeSpecificDownloadPath | 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1.4 | OCTET STRING | read-create | This field defines the path to CPE specific files. This path is a sub-path to cpeConfigMgrDownloadBasePath. This path is also used when checking the CPEs reported specific configuration with the required configuration in CPE Config Manager. The default value of this field can take two forms depending on the port type: 1. //// 2. /- If the interface type can span multiple physical ports (i.e. bond groups), the second method will be used to define the default value. Operators are free to define their own values, however, this path must exist for files to be downloaded. If the CPE is required to upload to this path, it may create this path before doing the upload. The total path the CPE will use to access specific files is a concatenation of these two path fields: / |
| OCT managedCpeType | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.5 | OCTET STRING | read-create | This field designates the type of CPE configured by this entry. This string must match the string returned by the attached CPE exactly. |
| OCT reportedCpeConfigFilename | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.6 | OCTET STRING | read-only | The filename of the configuration the CPE is currently running. This filename must exactly match the value of cpeSpecificConfigFile or requiredCpeGenericConfigFile. |
| OCT reportedCpeFSAN | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.9 | OCTET STRING | read-only | A string containing the FSAN value reported by the CPE. The FSAN is a string of ASCII decimal digits representing the vendor-specific portion of the onu serial number in hex format |
| MAC reportedCpeMacAddress | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.10 | MacAddress | read-only | The MAC address used by the CPE on the cpe-mgr interface. |
| OCT reportedCpeRegistrationID | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.8 | OCTET STRING | read-only | A string containing the registration ID reported by the CPE. |
| OCT reportedCpeSerialNumber | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.7 | OCTET STRING | read-only | A string containing the serial number reported by the CPE. |
| OCT reportedCpeSoftwareVersion | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.4 | OCTET STRING | read-only | A string containing the software image version received from the CPE. If this string does not exactly match the value of requiredCpeSoftwareVersion, a software image update will be initiated by the managing CO device. |
| I32 reportedCpeState | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.13 | Integer32 | read-only | CPE State as reported by the CPE itself. This may not be completely accurate due to errors detected on the CO side. For example, if the update of a CPE is throttled, the CPE is told no updates required. In this state the CPE will consider itself 'operational', but the CO side knows otherwise. |
| OCT reportedCpeType | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.3 | OCTET STRING | read-only | The cpeType value received from the attached CPE, used to compare against the value in cpeConfigMgrEntry.managedCpeType. |
| OCT reportedCpeWebUIVersion | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.5 | OCTET STRING | read-only | A string containing the WebUI image version received from the CPE. If this string does not exactly match the value of requiredCpeWebUIVersion, a WebUI image update will be initiated by the managing CO device. Not all CPE types require or support a separate WebUI file. |
| OCT reportedDwnldSrvrBasePath | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.11 | OCTET STRING | read-only | The cpeConfigMgrDownloadBasePath the CPE last received and now reports back to the CO. |
| OCT reportedDwnldSrvrSpecificPath | 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.12 | OCTET STRING | read-only | The cpeSpecificDownloadPath the CPE last received and now reports back to the CO. |
| OCT requiredCpeGenericConfigFile | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.10 | OCTET STRING | read-create | A string defining the generic configuration filename for CPEs using this manager. The CPE must specify this filename to the CO device. If the names do not match exactly, the CO device will inform the CPE to download this file from the download server at the base path location. The cpeConfigMgrMemberEntry for attached CPEs may define a specific configuration filename in the cpeSpecificConfigFile field that will supersede this generic file. |
| OCT requiredCpeSoftwareFilename | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.7 | OCTET STRING | read-create | A string that specifies the filename the CPE must download if the requiredCpeSoftwareVersion comparison fails. This file must be available in the base path location on the download server. |
| OCT requiredCpeSoftwareVersion | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.6 | OCTET STRING | read-create | A string defining the software version. If the value of this field doesn't match the software version string returned by the CPE exactly, then a software update will be initiated for the connected CPE. If this field is a NULL string, then the software version will not be managed. |
| OCT requiredCpeWebUIFilename | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.9 | OCTET STRING | read-create | A string that specifies the filename the CPE must download if the requiredCpeWebUIVersion comparison fails. This file must be available in the base path location on the download server. |
| OCT requiredCpeWebUIVersion | 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.8 | OCTET STRING | read-create | A string defining the WebUI version. This version string must match exactly what the CPE returns or an upgrade of the WebUI file will be initiated. This only applies to certain CPE types. The CO device will not restrict setting this for CPEs that do not support it, but doing so will likely cause problems. If this field is left blank, but requiredCpeWebUIFilename is set, the CPE will be told to download a new WebUI file whenever it is also told to download a new software image file. This allows the WebUI file to be tied directly to the software image version. |
RFC description
Vendor-specific MIB for CPE management functionality in Zhone broadband equipment, manages CPE global parameters and configuration profiles.
Start monitoring Zhone Technologies CO equipment / Zhone CPE (Zero Touch Configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.