All MIBs › CPE-MANAGER › cpeCfgMgrClientForceUpdate
cpeCfgMgrClientForceUpdate
Module: CPE-MANAGER
OID (symbolic): CPE-MANAGER::cpeCfgMgrClientForceUpdate
OID (numeric): 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Writable object causing the immediate update of the CPE. After initiating the requested update, this field reverts to the 'none' state.
renewDhcp - Simply restarts the DHCP handshake. This could cause an update if the configuration on the CO device has changed.
updateConfig - This resets any previous configuration information and restarts the DHCP handshake. This has the effect of forcing a download and install of the configuration file even if it was the same as the previously installed file.
What is cpeCfgMgrClientForceUpdate?
This read-write INTEGER lets an admin immediately trigger renewDhcp(1) to restart the DHCP handshake or updateConfig(2) to reset prior configuration state and restart that handshake, with the field automatically reverting to none(0) once the action is initiated. An admin uses updateConfig(2) as a heavier-handed remediation when a CPE seems stuck in a bad configuration state, beyond what a simple DHCP renewal would fix. For example, when a CPE stops responding to normal configuration pushes, support sets cpeCfgMgrClientForceUpdate to updateConfig(2) to force it back through the full provisioning sequence.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.6 snmpwalk -v2c -c public <target> CPE-MANAGER::cpeCfgMgrClientForceUpdate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.6.1 snmpget -v2c -c public <target> CPE-MANAGER::cpeCfgMgrClientForceUpdate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.6.1 i <value>
Start monitoring Zhone Technologies CO equipment / Zhone CPE (Zero Touch Configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPE-MANAGER::cpeCfgMgrClientForceUpdate OID value, configure state conditions and alerts, and monitor any Zhone Technologies CO equipment / Zhone CPE (Zero Touch Configuration) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5504 | zhone | Zhone |
| 1.3.6.1.4.1.5504.3 | zhoneGeneric | Zhone |
| 1.3.6.1.4.1.5504.3.1 | zhoneSystem | Zhone |
| 1.3.6.1.4.1.5504.3.1.21 | cpeMgr | ZHONE-SYSTEM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5504.3.1.21.1 | cpeMgrModule | CPE-MANAGER |
| 1.3.6.1.4.1.5504.3.1.21.1.3 | cpeConfigMgrClient | CPE-MANAGER |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1 | cpeCfgMgrClientObjects | CPE-MANAGER |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.3 | cpeCfgMgrClientUpdateObjects | CPE-MANAGER |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.6 | cpeCfgMgrClientForceUpdate | CPE-MANAGER |