CIENA-CES-ICL-MIB

All MIBs › CIENA-CES-ICL-MIB

Organization: Ciena, Inc

Last Updated: 2013-11-07

Category: Network Interfaces, Vendor: Ciena

Description: Manages Inter-Chassis Links (ICL) for multi-chassis aggregation on Ciena CES switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIENA-CES-ICL-MIB?

CIENA-CES-ICL-MIB defines managed objects for Inter-Chassis Links (ICL) on Ciena CES Carrier Ethernet switches, the links used to bond a pair of chassis into one logical multi-chassis aggregation unit. Its data covers configuration and operational status of the ICL itself, which carries synchronization and control traffic between the paired chassis. Its monitoring emphasis is on the ICL's link/operational state, which is critical hardware-health information because a failed ICL can break the redundancy the entire multi-chassis configuration depends on. It builds on the same physical/logical interface concepts used elsewhere in Ciena's chassis architecture. It is deployed in carrier Ethernet access/aggregation networks that use dual-chassis high-availability pairs. Network engineers evaluating or troubleshooting this functionality can download the CIENA-CES-ICL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIENA-CES-ICL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ciena CES Carrier Ethernet switch (multi-chassis pair)

Monitoring Examples

Sample object names were not provided for this module, so specific OIDs can't be cited, but per its description the MIB defines managed objects for Inter-Chassis Links. In practice an operator would poll the ICL's operational/link state and member interface to confirm the link between the two chassis in a redundant pair is up; if that status changes to down, the paired chassis lose their synchronization path and multi-chassis aggregation can fail over or split.

What Can Be Monitored

ICL link operational status
ICL member interface/port
inter-chassis synchronization state

Imported Objects

From CIENA-GLOBAL-MIB

cienaGlobalMacAddress	OBJECT-TYPE
cienaGlobalSeverity	OBJECT-TYPE

From CIENA-SMI

cienaCesConfig	OBJECT-IDENTITY
cienaCesNotifications	OBJECT-IDENTITY

From CIENA-TC

CienaGlobalState
CienaMacAddress
CienaStatsClear

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
cienaCesIclMIB	1.3.6.1.4.1.1271.2.1.32			This MIB defines the managed objects for Inter-chassis Links
cienaCesIclMIBObjects	1.3.6.1.4.1.1271.2.1.32.1
cienaCesIcl	1.3.6.1.4.1.1271.2.1.32.1.1
cienaCesIclTable	1.3.6.1.4.1.1271.2.1.32.1.1.1		not-accessible	The (conceptual) table listing all the Inter-chassis Links (ICLs).
cienaCesIclEntry	1.3.6.1.4.1.1271.2.1.32.1.1.1.1		not-accessible	An entry (conceptual row) in the cienaCesIclTable.
U32 cienaCesIclIndex	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.1	Unsigned32	read-only	ICL Index for this entry
STR cienaCesIclName	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.2	DisplayString	read-only	This object specifies the name of the Inter-chassis link (ICL).
MAC cienaCesIclRemoteMacAddress	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.3	MacAddress	read-only	This object specifies the Inter-chassis link remote MAC address.
INT cienaCesIclType	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.4	INTEGER	read-only	This object specifies the Inter-chassis link type.
U32 cienaCesIclVlan	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.5	Unsigned32	read-only	This object specifies the ICL VLAN. This is valid only if cienaCesIclType is vlan(1).
STR cienaCesIclVsName	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.6	DisplayString	read-only	This object specifies the ICL VS. This is valid only if cienaCesIclType is vs(2).
STR cienaCesIclCfmServicePrimary	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.7	DisplayString	read-only	This object specifies primary CFM service on the ICL.
STR cienaCesIclCfmServiceSecondary	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.8	DisplayString	read-only	This object specifies the name of the Inter-chassis link (ICL).
CIE cienaCesIclOperState	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.9	CienaGlobalState	read-only	This object specifies the ICL operational state.
INT cienaCesIclStatus	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.10	INTEGER	read-only	This object specifies the status of the ICL.
CIE cienaCesIclAdminState	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.11	CienaGlobalState	read-only	This object specifies the admin state of the ICL.
INT cienaCesIclCfmFault	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.12	INTEGER	read-only	This object specifies if CFM fault is set on the ICL.
INT cienaCesIclVplsFault	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.13	INTEGER	read-only	This object specifies if VPLS fault is set on the ICL.
INT cienaCesIclRxTimeout	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.14	INTEGER	read-only	This object specifies if Rx timeout fault is set on the ICL
INT cienaCesIclIntervalMismatch	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.15	INTEGER	read-only	This object specifies if interval mismatch fault is set on the ICL
U32 cienaCesIclHeartbeatInterval	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.16	Unsigned32	read-only	This object specifies the ICL heartbeat interval. The range is 1 to 30s and the default is 1s.
U32 cienaCesIclUpTime	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.17	Unsigned32	read-only	This object specifies total time for which the ICL has been operationally down.
U32 cienaCesIclTotalDownTime	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.18	Unsigned32	read-only	This object specifies total time for which the ICL has been operationally down.
C32 cienaCesIclRxFrames	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.19	Counter32	read-only	This object specifies the number of CICP frames received by the ICL.
C32 cienaCesIclTxFrames	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.20	Counter32	read-only	This object specifies the number of CICP frames transmitted by the ICL.
C32 cienaCesIclRxUnknownFrames	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.21	Counter32	read-only	This object specifies the number of unknown frames received by the ICL.
C32 cienaCesIclRxHtbtFrames	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.22	Counter32	read-only	This object specifies the number of Hearbeat frames received by the ICL.
C32 cienaCesIclTxHtbtFrames	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.23	Counter32	read-only	This object specifies the number of Hearbeat frames transmitted by the ICL.
C32 cienaCesIclTxFailedFrames	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.24	Counter32	read-only	This object specifies the number of failed to transmit frames.
C32 cienaCesIclNumberFailures	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.25	Counter32	read-only	This object specifies the number of ICL failures.
C32 cienaCesIclRxConfigMismatch	1.3.6.1.4.1.1271.2.1.32.1.1.1.1.26	Counter32	read-only	This object specifies the number of ICL config mismatch frames received.
cienaCesIclMIBNotificationPrefix	1.3.6.1.4.1.1271.2.1.32.2
cienaCesIclMIBNotifications	1.3.6.1.4.1.1271.2.1.32.2.0
NTF cienaCesIclStateChange	1.3.6.1.4.1.1271.2.1.32.2.0.1			This notification is sent when ICL oper state changes. Var binding cienaCesIclIndex represents the ICL index.
cienaCesIclMIBConformance	1.3.6.1.4.1.1271.2.1.32.3
cienaCesIclMIBCompliances	1.3.6.1.4.1.1271.2.1.32.3.1
cienaCesIclMIBGroups	1.3.6.1.4.1.1271.2.1.32.3.2

RFC description

Manages inter-chassis links (ICL) for heartbeat monitoring, status, and performance metrics on Ciena platforms.

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIENA-CES-ICL-MIB

What Is CIENA-CES-ICL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description