| OID symbolic | OID numeric | Type | Access | Description |
|---|
| fsan | 1.3.6.1.4.1.1 | | | |
| fsVdsl | 1.3.6.1.4.1.1.1 | | | |
| channelChangeMib | 1.3.6.1.4.1.1.1.1 | | | This module defines a MIB for managing the Channel
Change Control Function within an OLT/ONU. |
| channelChangeMibObjects | 1.3.6.1.4.1.1.1.1.1 | | | |
| channelTable | 1.3.6.1.4.1.1.1.1.1.1 | | not-accessible | This defines the channels and associated ATM replication points (ATM VCCs) within the OLT/ONU. Note that the channel table supports both IP multicast addresses and DSM-CC program IDs as a means of channel lookup. |
| channelEntry | 1.3.6.1.4.1.1.1.1.1.1.1 | | not-accessible | An entry in the channelTable represents a single channel. |
| IP channelId | 1.3.6.1.4.1.1.1.1.1.1.1.1 | IpAddress | not-accessible | The channelId shall be a Class D IP address allocated to the multicast channel regardless of whether the channel is delivering video over UDP/IP multicast or AAL5. Where DSM-CC is used as the channel change protocol, this is also the DSM-CC Broadcast Program ID (BPID). This facilitates transparent mapping between the IGMP and DSM-CC channel change protocols. |
| I32 entitlementIndex | 1.3.6.1.4.1.1.1.1.1.1.1.2 | Integer32 | read-create | The value of this object is the key for performing conditional access. The value zero (0) is reserved and is allocated to a channel which is free and does not require conditional access to be performed. Note that a maximum of 4095 channels can be supported by this MIB. |
| NUM networkPortId | 1.3.6.1.4.1.1.1.1.1.1.1.3 | InterfaceIndex | read-create | The value of this object shall be equal to the ifIndex of the network interface in the OLT/ONU carrying the multicast channels. This is so that this object along with the vpi and vci objects below can be used as an index into the OLT's/ONU's ifTable to gather more information about the replication point(ATM VCC) such as peak bandwidth. |
| I32 vpi | 1.3.6.1.4.1.1.1.1.1.1.1.4 | Integer32 | read-create | The value of this object is equal to the VPI allocated to
the replication point (ATM VCC) in the OLT/ONU for this channel. |
| I32 vci | 1.3.6.1.4.1.1.1.1.1.1.1.5 | Integer32 | read-create | The value of this object is equal to the VCI allocated to
the replication point (ATM VCC) in the OLT/ONU for this channel. |
| INT channelAdminStatus | 1.3.6.1.4.1.1.1.1.1.1.1.7 | INTEGER | read-create | This object is used to control the management state of this channel. When this object is set to locked(1) all existing customers connected to this channel shall be immediately disconnected and further join requests to this channel should be rejected. If this object is set to shuttingDown(3), no further join requests should be accepted for this channel; when all existing customers have disconnected from this channel the value of this object moves to locked(1). |
| ROW channelRowStatus | 1.3.6.1.4.1.1.1.1.1.1.1.8 | RowStatus | read-create | This object is used to manage row creation and deletion. When the channelAdminStatus is locked(1) the value of this object should be notInService(2). When the channelAdminStatus is unlocked(2) the value of this objects should be active(1) or notReady (3). When the value of channelAdminStatus is shuttingDown(3), the value of this object should be active(1). |
| customerTable | 1.3.6.1.4.1.1.1.1.1.2 | | not-accessible | This defines the customers for broadcast entertainment
services. |
| customerEntry | 1.3.6.1.4.1.1.1.1.1.2.1 | | not-accessible | An entry in the customerTable represents a single customer. |
| NUM onuId | 1.3.6.1.4.1.1.1.1.1.2.1.1 | InterfaceIndexOrZero | not-accessible | Describes uniquely the ONU to which the customer is attached. The value of this object shall be the ifIndex of the interface in the OLT that connects to the associated ONU. If the OLT/ONU are integrated then the value of this object shall be zero (0). |
| NUM customerPortId | 1.3.6.1.4.1.1.1.1.1.2.1.2 | InterfaceIndex | not-accessible | Describes uniquely the port within the ONU/OLT to which the customer is attached. The value of this object shall be the ifIndex of the port to which the customer is attached. |
| I32 maxMulticastTraffic | 1.3.6.1.4.1.1.1.1.1.2.1.3 | Integer32 | read-create | This object defines the maximum amount of bandwidth in kilobit/s allocated to broadcast entertainment services. The value shall be an integer multiple of 10kbps and shall not exceed the DSL line rate. |
| I32 maxMulticastStreams | 1.3.6.1.4.1.1.1.1.1.2.1.4 | Integer32 | read-create | This object defines the maximum number of multicast streams that can be active simultaneously across a DSL UNI. A value of zero (0) is used to indicate that this object shall not be used as part of any decision making process for a channel change request. |
| OCT untimedEntitlements1 | 1.3.6.1.4.1.1.1.1.1.2.1.5 | OCTET STRING | read-create | This object is used as a bitmap to store untimed entitlements to premium channels. Note that the first bit of the first octet is reserved. Bits 1 to 2047 correspond to entitlements for channels with entitlementIndex between 1 and 2047, respectively. In order to entitlement channel with entitlementIndex x, the value of bit x in this bitmap shall be 1. In order to revoke entitlement to channel with entitlementIndex y, the value of bit y in this bitmap shall be 0. |
| OCT untimedEntitlements2 | 1.3.6.1.4.1.1.1.1.1.2.1.6 | OCTET STRING | read-create | In order to support a greater number of channels this object is used in the same way as untimedEntitlements1 but bits 0 to 2048 correspond to entitlements for channels with entitlementIndex between 2048 and 4095, respectively. The index into this bitmap is entitlementIndex - 2048. |
| IP grantEntitlement | 1.3.6.1.4.1.1.1.1.1.2.1.7 | IpAddress | read-create | When granting entitlements to a single channel for many customers SNMP Setting the untimedEntitlement1/2 object leads to lots of management traffic due to the size of the untimedEntitlement1/2 object. In this situation it is much more bandwidth efficient to use this object. To grant an entitlement, the value of this object is SET to the channelId of the Channel for which entitlement is being granted to this customer. When this object is SET, the OLT/ONU shall automatically update the associated bit in the untimedEntitlement1/2 object to 1. |
| IP revokeEntitlement | 1.3.6.1.4.1.1.1.1.1.2.1.8 | IpAddress | read-create | When revoking entitlements to a single channel for many customers SNMP Setting the untimedEntitlement1/2 object leads to lots of management traffic due to the size of the untimedEntitlement1/2 object. In this situation it is much more bandwidth efficient to use this object. To revoke an entitlement, the value of this object is SET to the channelId of the Channel for which entitlement is being revoked for this customer. When this object is SET, the OLT/ONU shall automatically update the associated bit in the untimedEntitlement1/2 object to zero (0). |
| INT customerAdminStatus | 1.3.6.1.4.1.1.1.1.1.2.1.9 | INTEGER | read-create | This object is used to control the management state of this customer. When this object is set to locked(1) all existing channels being delivered to this customer shall be immediately disconnected and further join requests from this customer shall be rejected. If this object is set to shuttingDown(3), no further join requests should be accepted from this customer; when all existing channels have been disconnected from this customer the value of this object moves to locked(1). |
| ROW customerRowStatus | 1.3.6.1.4.1.1.1.1.1.2.1.10 | RowStatus | read-create | This object is used to manage row creation and deletion. When the channelAdminStatus is locked(1) the value of this object should be notInService(2). When the channelAdminStatus is unlocked(2) the value of this objects should be active(1) or notReady (3). When the value of channelAdminStatus is shuttingDown(3), the value of this object should be active(1). |
| timedEntitlementTable | 1.3.6.1.4.1.1.1.1.1.3 | | not-accessible | This table is used to store entitlements to channels that
have a relatively short duration, such as PPV channels. |
| timedEntitlementEntry | 1.3.6.1.4.1.1.1.1.1.3.1 | | not-accessible | An entry corresponds to timed entitlement for a single
channel identified by the channelId. The same entry may
be applicable to one or more customers as defined by
the customerTimeEntitlementTable. |
| I32 timedEntitlementId | 1.3.6.1.4.1.1.1.1.1.3.1.1 | Integer32 | read-create | Describes uniquely a timed entitlement. |
| IP timedEntitlementChannelId | 1.3.6.1.4.1.1.1.1.1.3.1.2 | IpAddress | read-create | This has the value of the channelId of the channelEntry
for which this timedEntitlementEntry is for. |
| OCT startTime | 1.3.6.1.4.1.1.1.1.1.3.1.3 | OCTET STRING | read-create | This is the time, expressed in UTC, from which time
the channel is allowed to be viewed. When this time is
less than or equal to the current time, the bit in the
untimedEntitlement1/2 object corresponding to the channel
for which this timedEntitlementEntry relates is set to 1. |
| OCT stopTime | 1.3.6.1.4.1.1.1.1.1.3.1.4 | OCTET STRING | read-create | This is the time, expressed in UTC, after which time
the channel is not allowed to be viewed. When this time is
less than the current time, the bit in the
untimedEntitlement1/2 object corresponding to the channel
for which this timedEntitlementEntry relates is set to
zero (0). Once this is done this timedEntitlementEntry
shall also be removed from this table in order to stop this
table growing indefinitely. Note that the information may
be archived by the management system for audit purposes. |
| ROW entitlementRowStatus | 1.3.6.1.4.1.1.1.1.1.3.1.5 | RowStatus | read-create | This object is used to manage row creation and deletion. |
| customerTimedEntitlementTable | 1.3.6.1.4.1.1.1.1.1.4 | | not-accessible | This table defines the timed entitlements used by a
customer as defined by the associated
timedEntitlementEntry. |
| customerTimedEntitlementEntry | 1.3.6.1.4.1.1.1.1.1.4.1 | | not-accessible | An entry corresponds to a timed entitlement for a customer. |
| NUM custOnuId | 1.3.6.1.4.1.1.1.1.1.4.1.1 | InterfaceIndexOrZero | not-accessible | Describes uniquely the ONU to which the customer is attached. The value of this object shall be the ifIndex of the interface in the OLT that connects to the associated ONU. If the OLT/ONU are integrated then the value of this object shall be zero (0). |
| NUM custPortId | 1.3.6.1.4.1.1.1.1.1.4.1.2 | InterfaceIndex | not-accessible | Describes uniquely the port within the ONU/OLT to which the customer is attached. The value of this object shall be the ifIndex of the port to which the customer is attached. |
| I32 custTimedEntitlementId | 1.3.6.1.4.1.1.1.1.1.4.1.3 | Integer32 | read-create | This has the value of the timedEntitlementId for the
timedEntitlementEntry that defined the timed entitlement
to a channel for this customer. |
| ROW custTimedEntitlementRowStatus | 1.3.6.1.4.1.1.1.1.1.4.1.4 | RowStatus | read-create | This object is used to manage row creation and deletion. |
| NUM rejectedOnuId | 1.3.6.1.4.1.1.1.1.1.5 | InterfaceIndexOrZero | read-write | Identifies the ONU from which the rejected channel change
request originated. |
| NUM rejectedCustomerPortId | 1.3.6.1.4.1.1.1.1.1.6 | InterfaceIndex | read-write | Identifies the DSL portfrom which the rejected channel
change request originated. |
| INT caFailedNotificationStatus | 1.3.6.1.4.1.1.1.1.1.7 | INTEGER | read-write | This object is used to enable and disable the sending of
the channelChangeCAFailed trap. |
| channelChangeMibNotifications | 1.3.6.1.4.1.1.1.1.2 | | | |
| channelChangeMibNotificationPrefix | 1.3.6.1.4.1.1.1.1.2.0 | | | |
| NTF channelChangeCAFailed | 1.3.6.1.4.1.1.1.1.2.0.1 | | | This trap is generated when conditional access fails for a
requested channel change. The trap identifies the customer
that issued the request. |
| channelChangeMibConformance | 1.3.6.1.4.1.1.1.1.3 | | | |
| channelChangeMibCompliances | 1.3.6.1.4.1.1.1.1.3.1 | | | |
| channelChangeMibCompliance | 1.3.6.1.4.1.1.1.1.3.1.1 | | | The compliance statement for SNMP entities that support
the channel change function as specified in FS-VDSL SA
specification.
For a system to conform to this MIB it shall also implement:
- ifTable from RFC 2863 to define the physical interfaces. |
| channelChangeMibGroups | 1.3.6.1.4.1.1.1.1.3.2 | | | |
| channelChangeBasicGroup | 1.3.6.1.4.1.1.1.1.3.2.1 | | | A collection of objects required as a minimum to manage
the Channel Change Control function. |
| channelChangeCACGroup | 1.3.6.1.4.1.1.1.1.3.2.2 | | | A collection of objects required to support CAC. |
| channelChangeBasicCAGroup | 1.3.6.1.4.1.1.1.1.3.2.3 | | | A collection of objects required to support CA with only
untimed entitlements. This group is sufficient to support
conditional access for up to 2047 channels. |
| channelChangeCA4095ChannelsGroup | 1.3.6.1.4.1.1.1.1.3.2.4 | | | This group is required in addition to the
channelChangeBasicCAGroup to support CA for up to 4095
channels. |
| channelChangeCATimedEntitlementsGroup | 1.3.6.1.4.1.1.1.1.3.2.5 | | | This group is required in addition to the
channelChangeBasicCAGroup, and if applicable the
channelChangeCA4095ChannelsGroup, to support timed
entitlements. |
| channelChangeCANotificationsGroup | 1.3.6.1.4.1.1.1.1.3.2.6 | | | This group contains the notification used to inform
management that a conditional access request failed. This
group is optional if CA is implemented by the Channel
Change Function. |
