All MIBs › BGP4-V2-MIB-JUNIPER
Organization: IETF IDR Working Group
Last Updated: 2012--1-2-
Category: Routing Protocols, Vendor: Juniper
Description: Extends BGP-4 version 2 MIB with Juniper-specific objects for peer groups, policy, and routing instance statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is BGP4-V2-MIB-JUNIPER?
BGP4-V2-MIB-JUNIPER is Juniper Networks' extension of the standard BGP4 version-2 MIB, adding vendor-specific objects for peer groups, routing policy, and per-routing-instance BGP statistics on Juniper routers. It builds on the base BGP4-MIB peer table structure to expose additional grouping and policy-related attributes alongside standard peer state and route statistics. Its monitoring value centers on software/protocol health: peer session state and established/idle transitions reveal BGP session flaps or routing instability, which are critical faults in service-provider and enterprise WAN routing. It explicitly extends and depends on the IETF BGP4-MIB (RFC 4273) and the underlying BGP4 protocol standard. It is typically deployed on Juniper MX/M-series routers running multiple BGP routing instances in ISP or large enterprise backbone networks. Engineers can download the BGP4-V2-MIB-JUNIPER file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in BGP4-V2-MIB-JUNIPER. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Juniper Networks router (MX/M-series)
Monitoring Examples
An operator would poll the peer-group and routing-instance BGP statistics extensions to confirm the number of established peers per instance matches expectations, cross-referencing against the base BGP4-MIB peer state objects. A drop in established peer count or a spike in peer resets within a given routing instance would indicate a BGP session flap caused by a link failure, MTU mismatch, or policy misconfiguration.
What Can Be Monitored
- BGP peer group configuration
- per-routing-instance peer statistics
- BGP session state
- routing policy application
- peer established/reset counts
This MIB depends on
Related MIBs
Imported Objects
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressPrefixLength | |
| InetAddressType | |
| InetAutonomousSystemNumber | |
| InetPortNumber |
| jnxBgpM2Experiment | OBJECT-IDENTITY |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| RowPointer | |
| RowStatus | |
| StorageType | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using jnxBgpM2PathAttrCount OID:
Select a Juniper Networks router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type jnxBgpM2PathAttrCount into the Find box to locate it in the OID tree, then select it and click OK. The number of entries in the jnxBgpM2PathAttrTable. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| jnxBgpM2 | 1.3.6.1.4.1.2636.5.1.1 | This MIB module defines management objects for the Border Gateway Protocol, Version 4. | ||
| jnxBgpM2AdjRibsOutEntry | 1.3.6.1.4.1.2636.5.1.1.3.2.1 | not-accessible | List of BGP routes that have been placed into a peer's Adj-Ribs-Out. | |
| U32 jnxBgpM2AdjRibsOutIndex | 1.3.6.1.4.1.2636.5.1.1.3.2.1.1 | Unsigned32 | read-only | Certain extensions to BGP permit multiple instance of a per afi, per safi prefix to be advertised to a peer. This object allows the enumeration of them. |
| NUM jnxBgpM2AdjRibsOutRoute | 1.3.6.1.4.1.2636.5.1.1.3.2.1.2 | RowPointer | read-only | This object points to the route in the jnxBgpM2NlriTable that corresponds to the entry in the peer's Adj-Rib-Out. Outgoing route maps are not reflected at this point as those are part of the Update-Send process. |
| jnxBgpM2AdjRibsOutTable | 1.3.6.1.4.1.2636.5.1.1.3.2 | not-accessible | This table contains on a per-peer basis one or more routes from the jnxBgpM2NlriTable that have been placed in this peer's Adj-Ribs-Out. | |
| jnxBgpM2As4byteGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.10 | AS Size objects. | ||
| jnxBgpM2AsConfederationGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.5 | Objects associated with BGP confederation membership. | ||
| INE jnxBgpM2AsPath4byteAggregatorAS | 1.3.6.1.4.1.2636.5.1.1.3.5.1.2 | InetAutonomousSystemNumber | read-only | The NEW_AGGREGATOR AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet. |
| U32 jnxBgpM2AsPath4byteCalcLength | 1.3.6.1.4.1.2636.5.1.1.3.5.1.3 | Unsigned32 | read-only | This value represents the calculated length of the NEW_AS_PATH according to the rules of the BGP specification. This value is used in route selection. |
| jnxBgpM2AsPath4byteEntry | 1.3.6.1.4.1.2636.5.1.1.3.5.1 | not-accessible | Each row contains the information for the AS 4-byte extension's NEW_AS_PATH and NEW_AGGREGATOR attributes. | |
| U32 jnxBgpM2AsPath4byteIndex | 1.3.6.1.4.1.2636.5.1.1.3.5.1.5 | Unsigned32 | read-only | This value is a unique index for the decomposed AS Path in the jnxBgpM2AsPathTable. It is assigned by the agent at the point of creation of the jnxBgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of jnxBgpM2AsPathIndex row instance values across rows of the jnxBgpM2AsPathTable. |
| T/F jnxBgpM2AsPath4bytePathPresent | 1.3.6.1.4.1.2636.5.1.1.3.5.1.1 | TruthValue | read-only | This value may only be true if this BGP Speaker is functioning as a router between ASs that are in 2-byte and 4-byte AS space. If this value is true, then the NEW_AS_PATH attributes are present and the 4-byte versions of the appropriate path attributes are in this row. If this value is false, then the following values will be present in the row: jnxBgpM2PathAttrAggregatorAS - zero (0). jnxBgpM2AsPathCalcLength - zero (0). jnxBgpM2AsPathString - zero (0) length string. jnxBgpM2AsPathIndex - zero (0). |
| STR jnxBgpM2AsPath4byteString | 1.3.6.1.4.1.2636.5.1.1.3.5.1.4 | SnmpAdminString | read-only | This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability. |
| jnxBgpM2AsPath4byteTable | 1.3.6.1.4.1.2636.5.1.1.3.5 | not-accessible | This table is present for BGP speakers that support the AS 4byte specification and are functioning as a router between 2-byte and 4-byte AS space. | |
| U32 jnxBgpM2AsPathCalcLength | 1.3.6.1.4.1.2636.5.1.1.3.4.1.11 | Unsigned32 | read-only | This value represents the calculated length of the AS Path according to the rules of the BGP specification. This value is used in route selection. |
| U32 jnxBgpM2AsPathElementIndex | 1.3.6.1.4.1.2636.5.1.1.3.6.1.2 | Unsigned32 | read-only | A per-AS element index. This will index a particular AS within a sequence or set of autonomous systems in an AS path. |
| INE jnxBgpM2AsPathElementValue | 1.3.6.1.4.1.2636.5.1.1.3.6.1.4 | InetAutonomousSystemNumber | read-only | An AS value for an AS the related NLRI traversed in the propagation of its advertisement. This value is to be interpreted in the context of the sequence implied by jnxBgpM2AsPathIndex and jnxBgpM2AsPathType (and, in sequence of the other table rows with the same value of jnxBgpM2PathAttrIndex and jnxBgpM2AsPathIndex). |
| jnxBgpM2AsPathEntry | 1.3.6.1.4.1.2636.5.1.1.3.6.1 | not-accessible | Information about an AS path provided with a path to a network. | |
| jnxBgpM2AsPathGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.9 | Objects to report AS paths received on BGP NLRIs. | ||
| U32 jnxBgpM2AsPathIndex | 1.3.6.1.4.1.2636.5.1.1.3.4.1.13 | Unsigned32 | read-only | This value is a unique index for the decomposed AS Path in the jnxBgpM2AsPathTable. It is assigned by the agent at the point of creation of the jnxBgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of jnxBgpM2AsPathIndex row instance values across rows of the jnxBgpM2AsPathTable. |
| U32 jnxBgpM2AsPathSegmentIndex | 1.3.6.1.4.1.2636.5.1.1.3.6.1.1 | Unsigned32 | read-only | A per-AS path segment index. This will index a set of autonomous systems in an AS path which are part of the same sequence or set (as determined by the row value of jnxBgpM2AsPathType, which should be the same value for each jnxBgpM2AsPathTable entry indexed by the same (jnxBgpM2PathAttrIndex, jnxBgpM2AsPathIndex) pair). |
| STR jnxBgpM2AsPathString | 1.3.6.1.4.1.2636.5.1.1.3.4.1.12 | SnmpAdminString | read-only | This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability. |
| jnxBgpM2AsPathTable | 1.3.6.1.4.1.2636.5.1.1.3.6 | not-accessible | The BGP-4 Path Attribute AS Path Table contains the per network path (NLRI) AS PATH data received from the advertising BGP peer. | |
| INT jnxBgpM2AsPathType | 1.3.6.1.4.1.2636.5.1.1.3.6.1.3 | INTEGER | read-only | The type of sequence in which this asPath was advertised as an attribute. Note that all asPath row instances for a given (jnxBgpM2PathAttrIndex, jnxBgpM2AsPathIndex) index pair will have their jnxBgpM2AsPathType set to the same value. The values for jnxBgpM2AsPathType are interpreted as defined in the base BGP document and the BGP AS Confederations document. |
| INT jnxBgpM2AsSize | 1.3.6.1.4.1.2636.5.1.1.1.4 | INTEGER | read-only | The size of the AS value in this implementation. The semantics of this are determined as per the as-4bytes draft. |
| jnxBgpM2AuthenticationGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.1 | Objects associated with BGP authentication. | ||
| NTF jnxBgpM2BackwardTransition | 1.3.6.1.4.1.2636.5.1.1.1.0.2 | The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. | ||
| jnxBgpM2BaseGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.11 | Basic objects in local BGP implementation. | ||
| jnxBgpM2BaseNotifications | 1.3.6.1.4.1.2636.5.1.1.1.0 | |||
| jnxBgpM2BaseScalarASConfedExts | 1.3.6.1.4.1.2636.5.1.1.1.7.1.3065 | |||
| jnxBgpM2BaseScalarCapExts | 1.3.6.1.4.1.2636.5.1.1.1.7.2 | |||
| jnxBgpM2BaseScalarConfiguration | 1.3.6.1.4.1.2636.5.1.1.1.8 | |||
| jnxBgpM2BaseScalarExtensions | 1.3.6.1.4.1.2636.5.1.1.1.7 | |||
| jnxBgpM2BaseScalarNonCapExts | 1.3.6.1.4.1.2636.5.1.1.1.7.1 | |||
| jnxBgpM2BaseScalarRouteReflectExts | 1.3.6.1.4.1.2636.5.1.1.1.7.1.2796 | |||
| jnxBgpM2BaseScalars | 1.3.6.1.4.1.2636.5.1.1.1 | |||
| jnxBgpM2CapabilitiesGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.8 | Objects to report capabilities as received on BGP sessions. | ||
| T/F jnxBgpM2CapabilitySupportAvailable | 1.3.6.1.4.1.2636.5.1.1.1.3.1 | TruthValue | read-only | This value is TRUE if capability support is available and is enabled. |
| T/F jnxBgpM2CfgAllowVersionNegotiation | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.2 | TruthValue | read-create | If set to true, during session establishment with this peer, negotiation to a version lower than that specified in jnxBgpM2CfgPeerConfiguredVersion will be allowed. |
| jnxBgpM2CfgBaseScalarASConfedExts | 1.3.6.1.4.1.2636.5.1.1.1.8.4.1.3065 | |||
| jnxBgpM2CfgBaseScalarCapExts | 1.3.6.1.4.1.2636.5.1.1.1.8.4.2 | |||
| jnxBgpM2CfgBaseScalarExtensions | 1.3.6.1.4.1.2636.5.1.1.1.8.4 | |||
| jnxBgpM2CfgBaseScalarNonCapExts | 1.3.6.1.4.1.2636.5.1.1.1.8.4.1 | |||
| jnxBgpM2CfgBaseScalarReflectorExts | 1.3.6.1.4.1.2636.5.1.1.1.8.4.1.2796 | |||
| STO jnxBgpM2CfgBaseScalarStorageType | 1.3.6.1.4.1.2636.5.1.1.1.8.1 | StorageType | read-write | This object specifies the intended storage type for all configurable base scalars. |
| OID jnxBgpM2CfgClusterId | 1.3.6.1.4.1.2636.5.1.1.1.8.4.1.2796.2 | JnxBgpM2Identifier | read-write | The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's JnxBgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled. |
| INE jnxBgpM2CfgConfederationId | 1.3.6.1.4.1.2636.5.1.1.1.8.4.1.3065.2 | InetAutonomousSystemNumber | read-write | The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router. |
| T/F jnxBgpM2CfgConfederationRouter | 1.3.6.1.4.1.2636.5.1.1.1.8.4.1.3065.1 | TruthValue | read-write | This value is set to true if this implementation will be supporting BGP AS Confederations. |
| INE jnxBgpM2CfgLocalAs | 1.3.6.1.4.1.2636.5.1.1.1.8.2 | InetAutonomousSystemNumber | read-write | The local autonomous system number. If the jnxBgpM2AsSize is twoOctet, then the range is constrained to be 0-65535. |
| OID jnxBgpM2CfgLocalIdentifier | 1.3.6.1.4.1.2636.5.1.1.1.8.3 | JnxBgpM2Identifier | read-write | The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier. |
| INT jnxBgpM2CfgPeerAdminStatus | 1.3.6.1.4.1.2636.5.1.1.2.8.1.1.1 | INTEGER | read-write | This object allows the Manual Stop and Manual Start events to be sent to an activated peering session. |
| jnxBgpM2CfgPeerAdminStatusEntry | 1.3.6.1.4.1.2636.5.1.1.2.8.1.1 | not-accessible | Entry containing row for administratively starting and stopping peers. | |
| jnxBgpM2CfgPeerAdminStatusTable | 1.3.6.1.4.1.2636.5.1.1.2.8.1 | not-accessible | Table containing rows for administratively starting and stopping peering sessions. | |
| jnxBgpM2CfgPeerASConfederationExts | 1.3.6.1.4.1.2636.5.1.1.2.8.6.1.3065 | |||
| U32 jnxBgpM2CfgPeerAuthCode | 1.3.6.1.4.1.2636.5.1.1.2.8.4.1.2 | Unsigned32 | read-create | The authentication code for the BGP Authentication mechanism. |
| T/F jnxBgpM2CfgPeerAuthEnabled | 1.3.6.1.4.1.2636.5.1.1.2.8.4.1.1 | TruthValue | read-create | This value is true if BGP Authentication is enabled for this peer. This is the authentication mechanism documented in the base BGP specification, not the MD5 session protection mechanism. |
| jnxBgpM2CfgPeerAuthEntry | 1.3.6.1.4.1.2636.5.1.1.2.8.4.1 | not-accessible | Entry containing information about a peer's BGP Authentication configuration. | |
| jnxBgpM2CfgPeerAuthTable | 1.3.6.1.4.1.2636.5.1.1.2.8.4 | not-accessible | Table contain per peer configuration for BGP Authentication. | |
| OCT jnxBgpM2CfgPeerAuthValue | 1.3.6.1.4.1.2636.5.1.1.2.8.4.1.3 | OCTET STRING | read-create | The authentication payload for the BGP authentication mechanism. This value has semantic meaning within the context of the authentication code. |
| NUM jnxBgpM2CfgPeerBgpPeerEntry | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.12 | RowPointer | read-only | Upon activation of the session data contained in this row instance, this object points to an instance of a row within the jnxBgpM2PeerTable reflecting the session in its initializing or operational state. Retrieval of this column instance will always yield a value of {0.0} unless the session has successfully been activated (via jnxBgpM2CfgPeerRowEntryStatus). Such row instances will always have a value of jnxBgpM2CfgPeerError which is activated (3). |
| jnxBgpM2CfgPeerCapExts | 1.3.6.1.4.1.2636.5.1.1.2.8.6.2 | |||
| T/F jnxBgpM2CfgPeerConfedMember | 1.3.6.1.4.1.2636.5.1.1.2.8.6.1.3065.1.1.1 | TruthValue | read-create | This value indicates whether the given peer is in our confederation or not. |
| jnxBgpM2CfgPeerConfedMemberEntry | 1.3.6.1.4.1.2636.5.1.1.2.8.6.1.3065.1.1 | not-accessible | Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member. | |
| jnxBgpM2CfgPeerConfedMemberTable | 1.3.6.1.4.1.2636.5.1.1.2.8.6.1.3065.1 | not-accessible | Table of confederation member settings on a per-peer basis. | |
| U32 jnxBgpM2CfgPeerConfiguredVersion | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.1 | Unsigned32 | read-create | The configured version to originally start with this peer. The BGP speaker may permit negotiation to a lower version number of the protocol depending on the set value of jnxBgpM2CfgAllowVersionNegotiation. |
| U32 jnxBgpM2CfgPeerConnectRetryInterval | 1.3.6.1.4.1.2636.5.1.1.2.8.5.1.1 | Unsigned32 | read-create | Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds. |
| jnxBgpM2CfgPeerEntry | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1 | not-accessible | Entry containing information set up by a management entity to configure a connection with a BGP peer. | |
| STO jnxBgpM2CfgPeerEntryStorageType | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.10 | StorageType | read-create | This object type specifies the intended storage type for the jnxBgpM2CfgPeerEntry row instance. |
| INT jnxBgpM2CfgPeerError | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.11 | INTEGER | read-only | This value indicates the current error status of the row denoting the configured error status. If this row is still under creation (has not been activated jnxBgpM2CfgPeerRowEntryStatus), then this instance will be set to not-activated (1). At the point that the row is activated, jnxBgpM2CfgPeerError will reflect the error status of the row data itself. If there is another session already activated with the same local and remote addresses as denoted by {jnxBgpM2CfgPeerLocalAddrType, jnxBgpM2CfgPeerLocalAddr, jnxBgpM2CfgPeerRemoteAddr, jnxBgpM2CfgPeerRemotePort}, then the value of this will be set to err-duplicate-peering-session (2). If this row is associated with a peer session whose initialization has been attempted, the value will be set to activated (3) (and, jnxBgpM2PeerCfgPeerEntry will be set to the row instance of the entry in the jnxBgpM2PeerTable which reflects the state of the peering session). Note that this object only reflects the error as a function of the attempted activation of this row as containing data for a bgp peering session. The actual state of the session at the point of any protocol exchange or session state machine initiation is reflected in the jnxBgpM2PeerTable row instance (as reflected through jnxBgpM2CfgPeerPeerEntry) associated with this row instance. |
| jnxBgpM2CfgPeerExtensions | 1.3.6.1.4.1.2636.5.1.1.2.8.6 | |||
| U32 jnxBgpM2CfgPeerHoldTimeConfigured | 1.3.6.1.4.1.2636.5.1.1.2.8.5.1.2 | Unsigned32 | read-create | Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (jnxBgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds. |
| I32 jnxBgpM2CfgPeerIndex | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.14 | Integer32 | not-accessible | Uniquely identifies an instance of a peer row, as an element of configuration. |
| U32 jnxBgpM2CfgPeerKeepAliveConfigured | 1.3.6.1.4.1.2636.5.1.1.2.8.5.1.3 | Unsigned32 | read-create | Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in jnxBgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by jnxBgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of jnxBgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds. |
| IP jnxBgpM2CfgPeerLocalAddr | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.4 | InetAddress | read-create | The address of the local end of the peering session. |
| IPt jnxBgpM2CfgPeerLocalAddrType | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.3 | InetAddressType | read-create | The address family of the speakers of this BGP session. |
| INE jnxBgpM2CfgPeerLocalAs | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.5 | InetAutonomousSystemNumber | read-create | Autonomous system represented to peer on peering session initialization. Some implementations of BGP can represent themselves as multiple ASes. These implementations can set this to an alternate autonomous system. If this object is set to zero (0) at the point this row instance is set to active, then the implementation will initialize this session representing itself as the value of jnxBgpM2CfgLocalAs. |
| U32 jnxBgpM2CfgPeerMinASOrigInterval | 1.3.6.1.4.1.2636.5.1.1.2.8.5.1.4 | Unsigned32 | read-create | Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds. |
| U32 jnxBgpM2CfgPeerMinRouteAdverInter | 1.3.6.1.4.1.2636.5.1.1.2.8.5.1.5 | Unsigned32 | read-create | Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds. |
| I32 jnxBgpM2CfgPeerNextIndex | 1.3.6.1.4.1.2636.5.1.1.2.8.2 | Integer32 | read-only | This object contains the next appropriate value to use as an index for creation of a row instance in in the jnxBgpM2CfgPeerTable. If the number of available entries in the jnxBgpM2CfgPeerTable is exhausted, a retrieval value of this object instance will return 0. A value of 0 may also be returned if the agent is otherwise incapable of jnxBgpM2CfgPeerTable row creation at the time of jnxBgpM2CfgPeerNextIndex retrieval. |
| jnxBgpM2CfgPeerNonCapExts | 1.3.6.1.4.1.2636.5.1.1.2.8.6.1 | |||
| INT jnxBgpM2CfgPeerReflectorClient | 1.3.6.1.4.1.2636.5.1.1.2.8.6.1.2796.1.1.1 | INTEGER | read-create | This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers. |
| jnxBgpM2CfgPeerReflectorClientEntry | 1.3.6.1.4.1.2636.5.1.1.2.8.6.1.2796.1.1 | not-accessible | Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client. | |
| jnxBgpM2CfgPeerReflectorClientTable | 1.3.6.1.4.1.2636.5.1.1.2.8.6.1.2796.1 | not-accessible | Table of route reflection client settings on a per-peer basis. | |
| IP jnxBgpM2CfgPeerRemoteAddr | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.7 | InetAddress | read-create | The address of the remote end (destination address of peer) for peering session. |
| IPt jnxBgpM2CfgPeerRemoteAddrType | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.6 | InetAddressType | read-create | The address family of the speakers of the remote BGP session. |
| INE jnxBgpM2CfgPeerRemoteAs | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.9 | InetAutonomousSystemNumber | read-create | Autonomous system number of the remote peer. |
| I32 jnxBgpM2CfgPeerRemotePort | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.8 | Integer32 | read-create | This is the remote port for the transport connection between the BGP peers. In the case of a transport for which the notion of port is irrelevant, the value of -1 can be defaulted or set. |
| jnxBgpM2CfgPeerRouteReflectionExts | 1.3.6.1.4.1.2636.5.1.1.2.8.6.1.2796 | |||
| U32 jnxBgpM2CfgPeerRoutingInstance | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.16 | Unsigned32 | read-create | Routing instance index. |
| ROW jnxBgpM2CfgPeerRowEntryStatus | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.13 | RowStatus | read-create | This object type is used to control creation, activation, and deletion of this row instance. |
| INT jnxBgpM2CfgPeerStatus | 1.3.6.1.4.1.2636.5.1.1.2.8.3.1.15 | INTEGER | read-create | This specifies the state of the peering session upon activation. If disabled, the FSM is in the halted state and no Automatic Start events are generated. If enabled, the FSM is in the running state and Automatic Start events may be generated. |
| jnxBgpM2CfgPeerTable | 1.3.6.1.4.1.2636.5.1.1.2.8.3 | not-accessible | BGP configuration peer table. This table allows the configuration of the parameters for a session with a BGP peer. +++wayne provide description of how config should be done for a peer per table. | |
| jnxBgpM2CfgPeerTimersEntry | 1.3.6.1.4.1.2636.5.1.1.2.8.5.1 | not-accessible | Entry containing per-peer timer configuration. | |
| jnxBgpM2CfgPeerTimersTable | 1.3.6.1.4.1.2636.5.1.1.2.8.5 | not-accessible | Table for configuration of per-peer timers. | |
| T/F jnxBgpM2CfgRouteReflector | 1.3.6.1.4.1.2636.5.1.1.1.8.4.1.2796.1 | TruthValue | read-write | This value is set to true if this implementation will be supporting route reflection. |
| OID jnxBgpM2ClusterId | 1.3.6.1.4.1.2636.5.1.1.1.7.1.2796.2 | JnxBgpM2Identifier | read-only | The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's JnxBgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled. |
| jnxBgpM2CommunitiesGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.2 | Objects associated with BGP communities. | ||
| INE jnxBgpM2ConfederationId | 1.3.6.1.4.1.2636.5.1.1.1.7.1.3065.2 | InetAutonomousSystemNumber | read-only | The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router. |
| T/F jnxBgpM2ConfederationRouter | 1.3.6.1.4.1.2636.5.1.1.1.7.1.3065.1 | TruthValue | read-only | This value is TRUE if this implementation supports the BGP AS Confederations Extension and this router is configured to be in a confederation. |
| jnxBgpM2Conformance | 1.3.6.1.4.1.2636.5.1.1.4 | |||
| jnxBgpM2CountersGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.7 | Objects to count discrete events and exchanges on BGP sessions. | ||
| jnxBgpM2ErrorsGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.12 | Errors received on BGP peering sessions. | ||
| NTF jnxBgpM2Established | 1.3.6.1.4.1.2636.5.1.1.1.0.1 | The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state. | ||
| jnxBgpM2ExtCommunitiesGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.3 | Objects associated with BGP extended communities. | ||
| IP jnxBgpM2LinkLocalNextHop | 1.3.6.1.4.1.2636.5.1.1.3.8.1.2545.1.2 | InetAddress | read-only | This value contains an IPv6 link local address of InetAddressType of type ipv6z. This value is only present if jnxBgpM2LinkLocalNextHopPresent is true. |
| jnxBgpM2LinkLocalNextHopEntry | 1.3.6.1.4.1.2636.5.1.1.3.8.1.2545.1 | not-accessible | Entry containing the link-local nexthops as sent by a BGP speaker running RFC 2545 extensions for double-nexthops. | |
| T/F jnxBgpM2LinkLocalNextHopPresent | 1.3.6.1.4.1.2636.5.1.1.3.8.1.2545.1.1 | TruthValue | read-only | This value is TRUE if and only if the BGP speaker is receiving IPv6 NLRI using the RFC 2545 double nexthop convention and it has received a link local scope nexthop in addition to the global scope nexthop. |
| jnxBgpM2LinkLocalNextHopTable | 1.3.6.1.4.1.2636.5.1.1.3.8.1.2545 | not-accessible | Table of link local nexthops as sent by RFC 2545 for IPv6 BGP Speakers. | |
| INE jnxBgpM2LocalAs | 1.3.6.1.4.1.2636.5.1.1.1.5 | InetAutonomousSystemNumber | read-only | The local autonomous system number. If the jnxBgpM2AsSize is twoOctet, then the range is constrained to be 0-65535. |
| OID jnxBgpM2LocalIdentifier | 1.3.6.1.4.1.2636.5.1.1.1.6 | JnxBgpM2Identifier | read-only | The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier. |
| jnxBgpM2MIBCompliance | 1.3.6.1.4.1.2636.5.1.1.4.1.1 | The compliance statement for entities which implement the BGP4 mib. | ||
| jnxBgpM2MIBCompliances | 1.3.6.1.4.1.2636.5.1.1.4.1 | |||
| jnxBgpM2MIBGroups | 1.3.6.1.4.1.2636.5.1.1.4.2 | |||
| jnxBgpM2MIBNotificationsGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.19 | This group contains objects for notifications supported by this mib module. | ||
| IPt jnxBgpM2NlriAfi | 1.3.6.1.4.1.2636.5.1.1.3.1.1.2 | InetAddressType | read-only | The address family of the prefix for this NLRI. |
| T/F jnxBgpM2NlriBest | 1.3.6.1.4.1.2636.5.1.1.3.1.1.6 | TruthValue | read-only | An indication of whether or not this route was chosen as the best BGP4 route. |
| U32 jnxBgpM2NlriCalcLocalPref | 1.3.6.1.4.1.2636.5.1.1.3.1.1.7 | Unsigned32 | read-only | The degree of preference calculated by the receiving BGP4 speaker for an advertised route. |
| jnxBgpM2NlriEntry | 1.3.6.1.4.1.2636.5.1.1.3.1.1 | not-accessible | Information about a path to a network. | |
| U32 jnxBgpM2NlriIndex | 1.3.6.1.4.1.2636.5.1.1.3.1.1.1 | Unsigned32 | read-only | This index allows for multiple instances of a base prefix for a certain AFI SAFI from a given peer. This is currently useful for two things: 1. Allowing for a peer in future implementations to send more than a single route instance. 2. Allow for extensions which extend the NLRI field to send the same prefix while utilizing other extension specific information. An example of this is RFC 3107 - Carrying MPLS labels in BGP. |
| NUM jnxBgpM2NlriOpaquePointer | 1.3.6.1.4.1.2636.5.1.1.3.1.1.10 | RowPointer | read-only | Pointer to a row that decomposes the data that is opaque to the BGP MIB but is sent in the NLRI. This RowPointer has zero (0) length data instance if jnxBgpM2NlriOpaqueType is none. |
| INT jnxBgpM2NlriOpaqueType | 1.3.6.1.4.1.2636.5.1.1.3.1.1.9 | INTEGER | read-only | This object enumerates the type of the row that is pointed to in the table row jnxBgpM2NlriOpaquePointer instance, if jnxBgpM2NlriOpaquePointer is in fact not a zero length. jnxBgpM2NlriOpaqueType is necessary since the data referenced by jnxBgpM2NlriOpaquePointer is opaque to BGP. For example, in the case of RFC 3107, the label stack that is pointed to may occur in the mplsLabelStackTable from the MPLS-LSR-MIB, and the instance value of jnxBgpM2NlriOpaqueType would be bgpMplsLabelStack(1). |
| IP jnxBgpM2NlriPrefix | 1.3.6.1.4.1.2636.5.1.1.3.1.1.4 | InetAddress | read-only | An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by jnxBgpM2PathAttrAddrPrefixLen. Any bits beyond the length specified by jnxBgpM2PathAttrAddrPrefixLen are zeroed. |
| ADR jnxBgpM2NlriPrefixLen | 1.3.6.1.4.1.2636.5.1.1.3.1.1.5 | InetAddressPrefixLength | read-only | Length in bits of the address prefix in the Network Layer Reachability Information field. |
| JNX jnxBgpM2NlriSafi | 1.3.6.1.4.1.2636.5.1.1.3.1.1.3 | JnxBgpM2Safi | read-only | The subsequent address family of the prefix for this NLRI |
| jnxBgpM2NlriTable | 1.3.6.1.4.1.2636.5.1.1.3.1 | not-accessible | The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. Collectively, this represents the Adj-Ribs-In. The route where jnxBgpM2NlriBest is TRUE represents, for this NLRI, the route that is installed in the LocRib from the Adj-Ribs-In. | |
| OID jnxBgpM2PathAttrAggregatorAddr | 1.3.6.1.4.1.2636.5.1.1.3.4.1.10 | JnxBgpM2Identifier | read-only | The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute. |
| INE jnxBgpM2PathAttrAggregatorAS | 1.3.6.1.4.1.2636.5.1.1.3.4.1.9 | InetAutonomousSystemNumber | read-only | The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet. |
| INT jnxBgpM2PathAttrAtomicAggregate | 1.3.6.1.4.1.2636.5.1.1.3.4.1.8 | INTEGER | read-only | When this object is set to atomicAggregatePresent, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific. |
| jnxBgpM2PathAttrCapExts | 1.3.6.1.4.1.2636.5.1.1.3.8.2 | |||
| jnxBgpM2PathAttrClusterEntry | 1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.2.1 | not-accessible | Information about a cluster traversal provided with a path to a network. | |
| U32 jnxBgpM2PathAttrClusterIndex | 1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.2.1.1 | Unsigned32 | read-only | An integral index for a row in this table. |
| jnxBgpM2PathAttrClusterTable | 1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.2 | not-accessible | The BGP-4 Path Attribute Cluster Table contains the per network path (NLRI) data on the reflection path which a route has traversed. The absence of row data for a given index value for jnxBgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable). | |
| OID jnxBgpM2PathAttrClusterValue | 1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.2.1.2 | JnxBgpM2Identifier | read-only | A four octet long value representing a part of the reflection path that the route has passed. Each such four octet long value represents the ID of a cluster that the route has traversed. The sequence of this path as received in the route advertisement will be preserved in the sequence of jnxBgpM2PathAttrClusterTable rows (and the jnxBgpM2PathAttrClusterValues in each row) as returned for a given jnxBgpM2PathAttrIndex value, and the monotonically increasing sequence of jnxBgpM2PathAttrClusterIndex values for that jnxBgpM2PathAttrIndex. |
| jnxBgpM2PathAttrCommEntry | 1.3.6.1.4.1.2636.5.1.1.3.8.1.1997.1.1 | not-accessible | Information about a community association provided with a path to a network. | |
| U32 jnxBgpM2PathAttrCommIndex | 1.3.6.1.4.1.2636.5.1.1.3.8.1.1997.1.1.1 | Unsigned32 | read-only | An integer index for a row in this table. |
| jnxBgpM2PathAttrCommTable | 1.3.6.1.4.1.2636.5.1.1.3.8.1.1997.1 | not-accessible | The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the community membership advertised with a route. The absence of row data for a given index value for jnxBgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable). | |
| jnxBgpM2PathAttrCommunityExts | 1.3.6.1.4.1.2636.5.1.1.3.8.1.1997 | |||
| JNX jnxBgpM2PathAttrCommValue | 1.3.6.1.4.1.2636.5.1.1.3.8.1.1997.1.1.2 | JnxBgpM2Community | read-only | A value representing a community. There are certain 4-octet long values which could be returned in this columnar row data that carry additional semantics. |
| C32 jnxBgpM2PathAttrCountEx | 1.3.6.1.4.1.2636.5.1.1.3.3 | Counter32 | read-only | The number of entries in the jnxBgpM2PathAttrTable. |
| jnxBgpM2PathAttrEntry | 1.3.6.1.4.1.2636.5.1.1.3.4.1 | not-accessible | Each entry contains data about a given network prefix, per-prefix and per-advertising peer. | |
| jnxBgpM2PathAttrExtCommEntry | 1.3.6.1.4.1.2636.5.1.1.3.8.1.65001.1 | not-accessible | Information about an extended community association provided with a path to a network. | |
| U32 jnxBgpM2PathAttrExtCommIndex | 1.3.6.1.4.1.2636.5.1.1.3.8.1.65001.1.1 | Unsigned32 | read-only | An integral index for a row in this table. |
| jnxBgpM2PathAttrExtCommTable | 1.3.6.1.4.1.2636.5.1.1.3.8.1.65001 | not-accessible | The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the extended community membership advertised with a route. The absence of row data for a given index value for jnxBgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable). XXX JMH - can not assign the OID until an RFC is published. | |
| JNX jnxBgpM2PathAttrExtCommValue | 1.3.6.1.4.1.2636.5.1.1.3.8.1.65001.1.2 | JnxBgpM2ExtendedCommunity | read-only | A value representing an extended community which was received with the route implied by the jnxBgpM2PathAttr Index value of this row data. There are certain 8-octet long values which could be returned in this columnar row data that carry additional semantics. |
| jnxBgpM2PathAttrExtensions | 1.3.6.1.4.1.2636.5.1.1.3.8 | |||
| jnxBgpM2PathAttributesGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.14 | Attributes received on BGP peering sessions. | ||
| U32 jnxBgpM2PathAttrIndex | 1.3.6.1.4.1.2636.5.1.1.3.1.1.8 | Unsigned32 | read-only | This value is a unique index for the per-NLRI entry in the jnxBgpM2PeerAttrTable. It is assigned by the agent at the point of creation of the jnxBgpM2PeerAttrTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of jnxBgpM2PeerAttrIndex row instance values across rows of the jnxBgpM2PeerAttrTable. It is used to provide an index structure for other tables whose data is logically per-peer, per-NLRI. |
| U32 jnxBgpM2PathAttrLocalPref | 1.3.6.1.4.1.2636.5.1.1.3.4.1.7 | Unsigned32 | read-only | The originating BGP4 speakers degree of preference for an advertised route. |
| T/F jnxBgpM2PathAttrLocalPrefPresent | 1.3.6.1.4.1.2636.5.1.1.3.4.1.6 | TruthValue | read-only | Whether or not the LocalPref value is present. If it is not present, the jnxBgpM2PathAttrLocalPref object has no useful value and should be set to 0. |
| U32 jnxBgpM2PathAttrMed | 1.3.6.1.4.1.2636.5.1.1.3.4.1.5 | Unsigned32 | read-only | This metric is used to discriminate between multiple exit points to an adjacent autonomous system. |
| T/F jnxBgpM2PathAttrMedPresent | 1.3.6.1.4.1.2636.5.1.1.3.4.1.4 | TruthValue | read-only | Whether or not the MED value is present. If it is not present, the jnxBgpM2PathAttrMed object has no useful value and should be set to 0. |
| IP jnxBgpM2PathAttrNextHop | 1.3.6.1.4.1.2636.5.1.1.3.4.1.3 | InetAddress | read-only | The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The address family of this object will be the same as that of the prefix in this row. Note that for RFC2545 style double nexthops, this object will always contain the global scope nexthop. jnxBgpM2LinkLocalNextHopTable will contain the linklocal scope nexthop. In the case that the mechanism documented in draft-kato-bgp-ipv6-link-local-00.txt is used and only a link local nexthop has been sent, , jnxBgpM2LinkLocalNextHopPresent will be false and jnxBgpM2PathAttrNextHop will contain the link local nexthop. |
| IPt jnxBgpM2PathAttrNextHopAddrType | 1.3.6.1.4.1.2636.5.1.1.3.4.1.2 | InetAddressType | read-only | The address family of the address for the border router that should be used to access the destination network. |
| jnxBgpM2PathAttrNonCapExts | 1.3.6.1.4.1.2636.5.1.1.3.8.1 | |||
| INT jnxBgpM2PathAttrOrigin | 1.3.6.1.4.1.2636.5.1.1.3.4.1.1 | INTEGER | read-only | The ultimate origin of the path information. |
| OID jnxBgpM2PathAttrOriginatorId | 1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.1.1.1 | JnxBgpM2Identifier | read-only | The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attribute. |
| jnxBgpM2PathAttrOriginatorIdEntry | 1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.1.1 | not-accessible | Each entry contains data pertinent to a network prefix as received through its originating BGP route reflector. | |
| jnxBgpM2PathAttrOriginatorIdTable | 1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.1 | not-accessible | Per prefix data pertinent to advertisement of a network prefix through an originator. | |
| jnxBgpM2PathAttrRouteReflectionExts | 1.3.6.1.4.1.2636.5.1.1.3.8.1.2796 | |||
| jnxBgpM2PathAttrTable | 1.3.6.1.4.1.2636.5.1.1.3.4 | not-accessible | Provides per advertised network-prefix attribute data, as advertised over a peering session. | |
| jnxBgpM2PathAttrUnknownEntry | 1.3.6.1.4.1.2636.5.1.1.3.7.1 | not-accessible | Information about an unknown attribute provided with a path to a network. | |
| U32 jnxBgpM2PathAttrUnknownIndex | 1.3.6.1.4.1.2636.5.1.1.3.7.1.1 | Unsigned32 | read-only | An integer index for a row in this table. |
| jnxBgpM2PathAttrUnknownTable | 1.3.6.1.4.1.2636.5.1.1.3.7 | not-accessible | The BGP-4 Path Attribute Unknown Table contains the per network path (NLRI) data on the path attributes advertised with a route but not known to the local BGP implementation or not otherwise capable of being returned from this agent. The absence of row data for a given index value for jnxBgpM2PathAttrIndex indicates a lack of such unknown attribute information for the indicated network path (as indexed by that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable). | |
| U32 jnxBgpM2PathAttrUnknownType | 1.3.6.1.4.1.2636.5.1.1.3.7.1.2 | Unsigned32 | read-only | The attribute type advertised with this unknown attribute by the peer. |
| OCT jnxBgpM2PathAttrUnknownValue | 1.3.6.1.4.1.2636.5.1.1.3.7.1.3 | OCTET STRING | read-only | Value of path attribute not understood by the base BGP-4 document. Octets beyond the maximum size, if any, are not recorded by this row object. |
| jnxBgpM2Peer | 1.3.6.1.4.1.2636.5.1.1.2 | |||
| jnxBgpM2PeerAsConfederationCfgGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.18 | Configuration objects for BGP peers that support BGP confederations. | ||
| jnxBgpM2PeerASConfederationExts | 1.3.6.1.4.1.2636.5.1.1.2.7.1.3065 | |||
| jnxBgpM2PeerAuthConfigurationGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.16 | Configuration objects for BGP peers that support authentication. | ||
| jnxBgpM2PeerAuthentication | 1.3.6.1.4.1.2636.5.1.1.2.3 | |||
| jnxBgpM2PeerAuthEntry | 1.3.6.1.4.1.2636.5.1.1.2.3.1.1 | not-accessible | Entry containing information about the authentication with a BGP peer. | |
| T/F jnxBgpM2PeerAuthRcvd | 1.3.6.1.4.1.2636.5.1.1.2.3.1.1.4 | TruthValue | read-only | The local peer has received authentication information from the remote peer in the BGP Authentication field. |
| U32 jnxBgpM2PeerAuthRcvdCode | 1.3.6.1.4.1.2636.5.1.1.2.3.1.1.5 | Unsigned32 | read-only | The code of the authentication information received from the remote peer. |
| OCT jnxBgpM2PeerAuthRcvdValue | 1.3.6.1.4.1.2636.5.1.1.2.3.1.1.6 | OCTET STRING | read-only | The payload of the authentication information from the remote peer. |
| T/F jnxBgpM2PeerAuthSent | 1.3.6.1.4.1.2636.5.1.1.2.3.1.1.1 | TruthValue | read-only | The local peer has sent authentication information to the remote peer in the BGP Authentication field. |
| U32 jnxBgpM2PeerAuthSentCode | 1.3.6.1.4.1.2636.5.1.1.2.3.1.1.2 | Unsigned32 | read-only | The code of the authentication information sent to the remote peer. |
| OCT jnxBgpM2PeerAuthSentValue | 1.3.6.1.4.1.2636.5.1.1.2.3.1.1.3 | OCTET STRING | read-only | The payload of the authentication information from the remote peer. |
| jnxBgpM2PeerAuthTable | 1.3.6.1.4.1.2636.5.1.1.2.3.1 | not-accessible | BGP peer authentication table. This table contains, one entry per BGP peer, information about the authentication with BGP peers. | |
| jnxBgpM2PeerCapabilities | 1.3.6.1.4.1.2636.5.1.1.2.5 | |||
| U32 jnxBgpM2PeerCapAnnouncedCode | 1.3.6.1.4.1.2636.5.1.1.2.5.1.1.1 | Unsigned32 | read-only | The BGP Capability Advertisement Capability Code. |
| U32 jnxBgpM2PeerCapAnnouncedIndex | 1.3.6.1.4.1.2636.5.1.1.2.5.1.1.2 | Unsigned32 | read-only | Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them. |
| OCT jnxBgpM2PeerCapAnnouncedValue | 1.3.6.1.4.1.2636.5.1.1.2.5.1.1.3 | OCTET STRING | read-only | The value of the announced capability. |
| jnxBgpM2PeerCapExts | 1.3.6.1.4.1.2636.5.1.1.2.7.2 | |||
| U32 jnxBgpM2PeerCapReceivedCode | 1.3.6.1.4.1.2636.5.1.1.2.5.2.1.1 | Unsigned32 | read-only | The BGP Capability Advertisement Capability Code. |
| U32 jnxBgpM2PeerCapReceivedIndex | 1.3.6.1.4.1.2636.5.1.1.2.5.2.1.2 | Unsigned32 | read-only | Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them. |
| OCT jnxBgpM2PeerCapReceivedValue | 1.3.6.1.4.1.2636.5.1.1.2.5.2.1.3 | OCTET STRING | read-only | The value of the announced capability. |
| jnxBgpM2PeerCapsAnnouncedEntry | 1.3.6.1.4.1.2636.5.1.1.2.5.1.1 | not-accessible | These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code | |
| jnxBgpM2PeerCapsAnnouncedTable | 1.3.6.1.4.1.2636.5.1.1.2.5.1 | not-accessible | This table contains the capabilities that are supported for a given peer. | |
| jnxBgpM2PeerCapsReceivedEntry | 1.3.6.1.4.1.2636.5.1.1.2.5.2.1 | not-accessible | These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code | |
| jnxBgpM2PeerCapsReceivedTable | 1.3.6.1.4.1.2636.5.1.1.2.5.2 | not-accessible | This table contains the capabilities that are supported for a given peer. | |
| T/F jnxBgpM2PeerConfedMember | 1.3.6.1.4.1.2636.5.1.1.2.7.1.3065.1.1.1 | TruthValue | read-only | This value indicates whether the given peer is in our confederation or not. |
| jnxBgpM2PeerConfedMemberEntry | 1.3.6.1.4.1.2636.5.1.1.2.7.1.3065.1.1 | not-accessible | Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member. | |
| jnxBgpM2PeerConfedMemberTable | 1.3.6.1.4.1.2636.5.1.1.2.7.1.3065.1 | not-accessible | Table of confederation member settings on a per-peer basis. | |
| jnxBgpM2PeerConfiguration | 1.3.6.1.4.1.2636.5.1.1.2.8 | |||
| jnxBgpM2PeerConfigurationGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.15 | Configuration objects for BGP peers. | ||
| jnxBgpM2PeerConfiguredTimersEntry | 1.3.6.1.4.1.2636.5.1.1.2.4.2.1 | not-accessible | Each entry corresponds to the current state of BGP timers on a given peering session. | |
| jnxBgpM2PeerConfiguredTimersTable | 1.3.6.1.4.1.2636.5.1.1.2.4.2 | not-accessible | Per peer management data on BGP session timers. | |
| U32 jnxBgpM2PeerConfiguredVersion | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1.4 | Unsigned32 | read-only | The configured version to originally start with this remote peer. The BGP speaker may permit negotiation to a lower version number of the protocol. |
| U32 jnxBgpM2PeerConnectRetryInterval | 1.3.6.1.4.1.2636.5.1.1.2.4.2.1.1 | Unsigned32 | read-only | Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds. |
| jnxBgpM2PeerCounters | 1.3.6.1.4.1.2636.5.1.1.2.6 | |||
| jnxBgpM2PeerCountersEntry | 1.3.6.1.4.1.2636.5.1.1.2.6.1.1 | not-accessible | Each entry contains counters of message transmissions and FSM transitions for a given BGP Peering session. | |
| jnxBgpM2PeerCountersTable | 1.3.6.1.4.1.2636.5.1.1.2.6.1 | not-accessible | The counters associated with a BGP Peer. | |
| jnxBgpM2PeerData | 1.3.6.1.4.1.2636.5.1.1.2.1 | |||
| jnxBgpM2PeerEntry | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1 | not-accessible | Entry containing information about the connection with a remote BGP peer. | |
| jnxBgpM2PeerErrors | 1.3.6.1.4.1.2636.5.1.1.2.2 | |||
| jnxBgpM2PeerErrorsEntry | 1.3.6.1.4.1.2636.5.1.1.2.2.1.1 | not-accessible | Each entry contains information about errors sent and received for a particular BGP peer. | |
| jnxBgpM2PeerErrorsTable | 1.3.6.1.4.1.2636.5.1.1.2.2.1 | not-accessible | On a per peer basis, this table reflects the last protocol-defined error encountered and reported on the peer session. If no entry for a given peer, by its jnxBgpM2PeerIndex, exists in this table, then no such errors have been observed, reported, and recorded on the session. | |
| jnxBgpM2PeerEventTimesEntry | 1.3.6.1.4.1.2636.5.1.1.2.4.1.1 | not-accessible | Each row contains a set of statistics about time spent and events encountered in the peer session Established state. | |
| jnxBgpM2PeerEventTimesTable | 1.3.6.1.4.1.2636.5.1.1.2.4.1 | not-accessible | A table reporting the per-peering session amount of time elapsed and update events since the peering session advanced into the Established state. | |
| jnxBgpM2PeerExtensions | 1.3.6.1.4.1.2636.5.1.1.2.7 | |||
| G32 jnxBgpM2PeerFsmEstablishedTime | 1.3.6.1.4.1.2636.5.1.1.2.4.1.1.1 | Gauge32 | read-only | This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted. |
| C32 jnxBgpM2PeerFsmEstablishedTrans | 1.3.6.1.4.1.2636.5.1.1.2.6.1.1.5 | Counter32 | read-only | The total number of times the BGP FSM transitioned into the established state for this peer. |
| jnxBgpM2PeerGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.13 | Core object types on BGP peering sessions. | ||
| U32 jnxBgpM2PeerHoldTime | 1.3.6.1.4.1.2636.5.1.1.2.4.3.1.1 | Unsigned32 | read-only | The value of this object is calculated by this BGP Speaker as being; zero (0) - if this was the value sent by the peer and this value is permitted by this BGP Speaker. In this case, no keepalive messages are sent and the Hold Timer is not set. At least three (3). This value is the smaller of the value sent by this peer in the OPEN message and jnxBgpM2PeerHoldTimeConfigured for this peer. This value is only defined when the peering session is in the Established state. |
| U32 jnxBgpM2PeerHoldTimeConfigured | 1.3.6.1.4.1.2636.5.1.1.2.4.2.1.2 | Unsigned32 | read-only | Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (jnxBgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds. |
| OID jnxBgpM2PeerIdentifier | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1.1 | JnxBgpM2Identifier | read-only | The BGP Identifier of this entry's remote BGP peer. This entry should be 0.0.0.0 unless the jnxBgpM2PeerState is in the OpenConfirm or the Established state. |
| U32 jnxBgpM2PeerIndex | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1.14 | Unsigned32 | read-only | This value is a unique index for the remote peer entry in the jnxBgpM2PeerTable. It is assigned by the agent at the point of creation of the jnxBgpM2PeerTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of jnxBgpM2PeerIndex row instance values across rows of the jnxBgpM2PeerTable. It is used to provide an index structure for other tables whose data is logically per-peer. For explicitly configured peers, this value will remain consistent until this row is deleted by deleting the configured peers. Unconfigured peers will generate a monotonically increasing number when a BGP FSM is built to process the peering session. Values in the jnxBgpM2PeerTable and other tables utilizing jnxBgpM2PeerIndex are expected to remain in existence for an arbitrary time after the unconfigured peer has been deleted in order to allow management applications to extract useful management information for those peers. Thus, an unconfigured peer using the same indices as the jnxBgpM2PeerTable that comes up while this row still exists will re-utilize the same row. |
| C32 jnxBgpM2PeerInTotalMessages | 1.3.6.1.4.1.2636.5.1.1.2.6.1.1.3 | Counter32 | read-only | The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established. |
| C32 jnxBgpM2PeerInUpdates | 1.3.6.1.4.1.2636.5.1.1.2.6.1.1.1 | Counter32 | read-only | The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established. |
| G32 jnxBgpM2PeerInUpdatesElapsedTime | 1.3.6.1.4.1.2636.5.1.1.2.4.1.1.2 | Gauge32 | read-only | Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time jnxBgpM2PeerInUpdates is incremented, the value of this object is set to zero (0). This value shall also be zero (0) when the peer is not in the Established state |
| U32 jnxBgpM2PeerKeepAlive | 1.3.6.1.4.1.2636.5.1.1.2.4.3.1.2 | Unsigned32 | read-only | Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with jnxBgpM2PeerHoldTime, it has the same proportion as what jnxBgpM2PeerKeepAliveConfigured has when compared with jnxBgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of jnxBgpM2PeerKeepAliveConfigured is zero (0). This value is only defined when the peering session is in the Established state. |
| U32 jnxBgpM2PeerKeepAliveConfigured | 1.3.6.1.4.1.2636.5.1.1.2.4.2.1.3 | Unsigned32 | read-only | Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in jnxBgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by jnxBgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of jnxBgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds. |
| OCT jnxBgpM2PeerLastErrorReceived | 1.3.6.1.4.1.2636.5.1.1.2.2.1.1.1 | OCTET STRING | read-only | The last error code and subcode received by this BGP Speaker via a NOTIFICATION message for this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode. |
| OCT jnxBgpM2PeerLastErrorReceivedData | 1.3.6.1.4.1.2636.5.1.1.2.2.1.1.7 | OCTET STRING | read-only | The last error code's data seen by this peer. |
| STR jnxBgpM2PeerLastErrorReceivedText | 1.3.6.1.4.1.2636.5.1.1.2.2.1.1.5 | SnmpAdminString | read-only | This object contains an implementation specific explanation of the error that was reported. |
| TIK jnxBgpM2PeerLastErrorReceivedTime | 1.3.6.1.4.1.2636.5.1.1.2.2.1.1.3 | TimeTicks | read-only | The timestamp that the last NOTIFICATION was received from this peer. |
| OCT jnxBgpM2PeerLastErrorSent | 1.3.6.1.4.1.2636.5.1.1.2.2.1.1.2 | OCTET STRING | read-only | The last error code and subcode sent by this BGP Speaker via a NOTIFICATION message to this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode. |
| OCT jnxBgpM2PeerLastErrorSentData | 1.3.6.1.4.1.2636.5.1.1.2.2.1.1.8 | OCTET STRING | read-only | The last error code's data sent to this peer. |
| STR jnxBgpM2PeerLastErrorSentText | 1.3.6.1.4.1.2636.5.1.1.2.2.1.1.6 | SnmpAdminString | read-only | This object contains an implementation specific explanation of the error that is being reported. |
| TIK jnxBgpM2PeerLastErrorSentTime | 1.3.6.1.4.1.2636.5.1.1.2.2.1.1.4 | TimeTicks | read-only | The timestamp that the last NOTIFICATION was sent to this peer. |
| IP jnxBgpM2PeerLocalAddr | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1.7 | InetAddress | read-only | The address of the local end of the peering session. |
| IPt jnxBgpM2PeerLocalAddrType | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1.6 | InetAddressType | read-only | The address family of the local end of the peering session. |
| INE jnxBgpM2PeerLocalAs | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1.9 | InetAutonomousSystemNumber | read-only | Some implementations of BGP can represent themselves as multiple ASs. This is the AS that this peering session is representing itself as to the remote peer. |
| INE jnxBgpM2PeerLocalPort | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1.8 | InetPortNumber | read-only | The local port for the TCP connection between the BGP peers. |
| U32 jnxBgpM2PeerMinASOrigInterval | 1.3.6.1.4.1.2636.5.1.1.2.4.2.1.4 | Unsigned32 | read-only | Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds. |
| U32 jnxBgpM2PeerMinRouteAdverInterval | 1.3.6.1.4.1.2636.5.1.1.2.4.2.1.5 | Unsigned32 | read-only | Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds. |
| jnxBgpM2PeerNegotiatedTimersEntry | 1.3.6.1.4.1.2636.5.1.1.2.4.3.1 | not-accessible | Each entry reflects a value of the currently operational, negotiated timers as reflected in the JnxBgpM2PeerNegotiatedTimersEntry. | |
| jnxBgpM2PeerNegotiatedTimersTable | 1.3.6.1.4.1.2636.5.1.1.2.4.3 | not-accessible | Current values of per-peer timers which can be dynamically set in the jnxBgpM2PeerConfiguredTimersTable. Values reflected in this table are the current operational values, after negotiation from values derived from initial configuration or last set from jnxBgpM2PeerConfiguredTimersTable row instances. | |
| U32 jnxBgpM2PeerNegotiatedVersion | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1.5 | Unsigned32 | read-only | The negotiated version of BGP running between the two peers. |
| jnxBgpM2PeerNonCapExts | 1.3.6.1.4.1.2636.5.1.1.2.7.1 | |||
| C32 jnxBgpM2PeerOutTotalMessages | 1.3.6.1.4.1.2636.5.1.1.2.6.1.1.4 | Counter32 | read-only | The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established. |
| C32 jnxBgpM2PeerOutUpdates | 1.3.6.1.4.1.2636.5.1.1.2.6.1.1.2 | Counter32 | read-only | The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established. |
| INT jnxBgpM2PeerReflectorClient | 1.3.6.1.4.1.2636.5.1.1.2.7.1.2796.1.1.1 | INTEGER | read-only | This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers. |
| jnxBgpM2PeerReflectorClientEntry | 1.3.6.1.4.1.2636.5.1.1.2.7.1.2796.1.1 | not-accessible | Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client. | |
| jnxBgpM2PeerReflectorClientTable | 1.3.6.1.4.1.2636.5.1.1.2.7.1.2796.1 | not-accessible | Table of route reflection client settings on a per-peer basis. | |
| IP jnxBgpM2PeerRemoteAddr | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1.11 | InetAddress | read-only | The address of the remote end of the peering session. |
| IPt jnxBgpM2PeerRemoteAddrType | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1.10 | InetAddressType | read-only | The address family of the remote end of the peering session. |
| INE jnxBgpM2PeerRemoteAs | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1.13 | InetAutonomousSystemNumber | read-only | The remote autonomous system number. |
| INE jnxBgpM2PeerRemotePort | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1.12 | InetPortNumber | read-only | The remote port for the TCP connection between the BGP peers. In the case of a transport for which the notion of 'port' is irrelevant, an instance value of -1 should be returned by the agent for this object. Note that the objects jnxBgpM2PeerLocalAddr, jnxBgpM2PeerLocalPort, jnxBgpM2PeerRemoteAddr and jnxBgpM2PeerRemotePort provide the appropriate reference to the standard MIB TCP connection table. or even the ipv6 TCP MIB as in rfc2452. |
| jnxBgpM2PeerRouteReflectionExts | 1.3.6.1.4.1.2636.5.1.1.2.7.1.2796 | |||
| jnxBgpM2PeerRouteReflectorCfgGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.17 | Configuration objects for BGP peers that support route reflection. | ||
| U32 jnxBgpM2PeerRoutingInstance | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1.15 | Unsigned32 | read-only | Routing instance index. |
| INT jnxBgpM2PeerState | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1.2 | INTEGER | read-only | The remote BGP peer's FSM state. |
| INT jnxBgpM2PeerStatus | 1.3.6.1.4.1.2636.5.1.1.2.1.1.1.3 | INTEGER | read-only | Whether or not the BGP FSM for this remote peer is halted or running. The BGP FSM for a remote peer is halted after processing a Stop event. Likewise, it is in the running state after a Start event. The jnxBgpM2PeerState will generally be in the idle state when the FSM is halted, although some extensions such as Graceful Restart will leave the peer in the Idle state but with the FSM running. |
| jnxBgpM2PeerTable | 1.3.6.1.4.1.2636.5.1.1.2.1.1 | not-accessible | BGP peer table. This table contains, one entry per remote BGP peer, any information about the connections with the remote BGP peers. | |
| jnxBgpM2PeerTimers | 1.3.6.1.4.1.2636.5.1.1.2.4 | |||
| IPt jnxBgpM2PrefixCountersAfi | 1.3.6.1.4.1.2636.5.1.1.2.6.2.1.1 | InetAddressType | read-only | The AFI index of the per-peer, per prefix counters |
| jnxBgpM2PrefixCountersEntry | 1.3.6.1.4.1.2636.5.1.1.2.6.2.1 | not-accessible | Entry containing information about a bgp-peers prefix counters. | |
| JNX jnxBgpM2PrefixCountersSafi | 1.3.6.1.4.1.2636.5.1.1.2.6.2.1.2 | JnxBgpM2Safi | read-only | The SAFI index of the per-peer, per prefix counters |
| jnxBgpM2PrefixCountersTable | 1.3.6.1.4.1.2636.5.1.1.2.6.2 | not-accessible | Additional per-peer, per AFI SAFI counters for prefixes | |
| G32 jnxBgpM2PrefixInPrefixes | 1.3.6.1.4.1.2636.5.1.1.2.6.2.1.7 | Gauge32 | read-only | The number of prefixes received from a peer and are stored in the Adj-Ribs-In for that peer. |
| G32 jnxBgpM2PrefixInPrefixesAccepted | 1.3.6.1.4.1.2636.5.1.1.2.6.2.1.8 | Gauge32 | read-only | The number of prefixes for a peer that are installed in the Adj-Ribs-In and are eligible to become active in the Loc-Rib. |
| G32 jnxBgpM2PrefixInPrefixesActive | 1.3.6.1.4.1.2636.5.1.1.2.6.2.1.11 | Gauge32 | read-only | The number of prefixes for a peer that are installed in the Adj-Ribs-In and are the active route in the Loc-Rib. |
| G32 jnxBgpM2PrefixInPrefixesRejected | 1.3.6.1.4.1.2636.5.1.1.2.6.2.1.9 | Gauge32 | read-only | The number of prefixes for a peer that are installed in the Adj-Ribs-In and are NOT eligible to become active in the Loc-Rib. |
| G32 jnxBgpM2PrefixOutPrefixes | 1.3.6.1.4.1.2636.5.1.1.2.6.2.1.10 | Gauge32 | read-only | The number of prefixes for a peer that are installed in that peers Adj-Ribs-Out. |
| jnxBgpM2Rfc2545Group | 1.3.6.1.4.1.2636.5.1.1.4.2.20 | This group is required for peers that support exchanging of IPv6 NLRI per RFC 2545. | ||
| jnxBgpM2Rib | 1.3.6.1.4.1.2636.5.1.1.3 | |||
| jnxBgpM2RouteReflectionGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.4 | Objects associated with BGP route reflection. | ||
| T/F jnxBgpM2RouteReflector | 1.3.6.1.4.1.2636.5.1.1.1.7.1.2796.1 | TruthValue | read-only | This value is TRUE if this implementation supports the BGP Route Reflection Extension and is enabled as a route reflector. If the BGP Route Reflection extension is not supported this value must be FALSE. |
| U32 jnxBgpM2SupportedAuthCode | 1.3.6.1.4.1.2636.5.1.1.1.2.1.1.1 | Unsigned32 | read-only | The BGP authentication code. |
| jnxBgpM2SupportedAuthentication | 1.3.6.1.4.1.2636.5.1.1.1.2 | |||
| jnxBgpM2SupportedAuthEntry | 1.3.6.1.4.1.2636.5.1.1.1.2.1.1 | not-accessible | Entry containing information whether a given BGP authentication mechanism is supported by this implementation. | |
| jnxBgpM2SupportedAuthTable | 1.3.6.1.4.1.2636.5.1.1.1.2.1 | not-accessible | The supported BGP authentication mechanisms. | |
| T/F jnxBgpM2SupportedAuthValue | 1.3.6.1.4.1.2636.5.1.1.1.2.1.1.2 | TruthValue | read-only | This value is TRUE if a given authentication method is supported by the local implementation. |
| jnxBgpM2SupportedCapabilities | 1.3.6.1.4.1.2636.5.1.1.1.3 | |||
| jnxBgpM2SupportedCapabilitiesEntry | 1.3.6.1.4.1.2636.5.1.1.1.3.2.1 | not-accessible | Information about supported capabilities indexed by capability number. | |
| jnxBgpM2SupportedCapabilitiesTable | 1.3.6.1.4.1.2636.5.1.1.1.3.2 | not-accessible | Table of supported BGP-4 capabilities. | |
| T/F jnxBgpM2SupportedCapability | 1.3.6.1.4.1.2636.5.1.1.1.3.2.1.2 | TruthValue | read-only | This value is True if this capability is supported, False otherwise. |
| U32 jnxBgpM2SupportedCapabilityCode | 1.3.6.1.4.1.2636.5.1.1.1.3.2.1.1 | Unsigned32 | read-only | Index of supported capability. The index directly corresponds with the BGP-4 Capability Advertisement Capability Code. |
| jnxBgpM2TimersGroup | 1.3.6.1.4.1.2636.5.1.1.4.2.6 | Objects associated with BGP peering timers. | ||
| jnxBgpM2Version | 1.3.6.1.4.1.2636.5.1.1.1.1 | |||
| jnxBgpM2VersionEntry | 1.3.6.1.4.1.2636.5.1.1.1.1.1.1 | not-accessible | Entry containing data on a given supported version of the Border Gateway Protocol and the level of support provided. It is expected that any agent implementation supporting this MIB module will report support for Version 4 of the Border Gateway Protocol at the very minimum. | |
| U32 jnxBgpM2VersionIndex | 1.3.6.1.4.1.2636.5.1.1.1.1.1.1.1 | Unsigned32 | read-only | The version number of the BGP Protocol. |
| T/F jnxBgpM2VersionSupported | 1.3.6.1.4.1.2636.5.1.1.1.1.1.1.2 | TruthValue | read-only | This value is TRUE if this version of the BGP protocol identified in 'jnxBgpM2VersionIndex' is supported. The absence of a row for a particular jnxBgpM2VersionIndex indicates that that jnxBgpM2VersionIndex protocol version number is not supported. |
| jnxBgpM2VersionTable | 1.3.6.1.4.1.2636.5.1.1.1.1.1 | not-accessible | Table of supported BGP versions. |
RFC description
Juniper Networks extension to draft IETF BGPv4 MIB version 2, with Juniper-specific BGP routing instance and prefix counter enhancements.
Start monitoring Juniper Networks routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.