All MIBs › BGP4-V2-MIB-JUNIPER › jnxBgpM2PeerHoldTimeConfigured
jnxBgpM2PeerHoldTimeConfigured
Module: BGP4-V2-MIB-JUNIPER
OID (symbolic): BGP4-V2-MIB-JUNIPER::jnxBgpM2PeerHoldTimeConfigured
OID (numeric): 1.3.6.1.4.1.2636.5.1.1.2.4.2.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (jnxBgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
What is jnxBgpM2PeerHoldTimeConfigured?
This is the Hold Time value (in seconds, 0 or 3-65535) the local router advertises to the peer in its OPEN message; the actual negotiated Hold Time is the minimum of both peers' configured values. Dictates how long either side waits for a keepalive before declaring the peer dead. Example: if configured to 180 seconds, and the peer sends 120, the negotiated Hold Time becomes 120 and keepalives must arrive every 40 seconds or less.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.5.1.1.2.4.2.1.2 snmpwalk -v2c -c public <target> BGP4-V2-MIB-JUNIPER::jnxBgpM2PeerHoldTimeConfigured
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.5.1.1.2.4.2.1.2.1 snmpget -v2c -c public <target> BGP4-V2-MIB-JUNIPER::jnxBgpM2PeerHoldTimeConfigured.1
Start monitoring Juniper Networks routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BGP4-V2-MIB-JUNIPER::jnxBgpM2PeerHoldTimeConfigured OID value, configure state conditions and alerts, and monitor any Juniper Networks routers from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.5 | jnxExperiment | JUNIPER-EXPERIMENT-MIB |
| 1.3.6.1.4.1.2636.5.1 | jnxBgpM2Experiment | JUNIPER-EXPERIMENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.5.1.1 | jnxBgpM2 | BGP4-V2-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.1.1.2 | jnxBgpM2Peer | BGP4-V2-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.1.1.2.4 | jnxBgpM2PeerTimers | BGP4-V2-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.1.1.2.4.2 | jnxBgpM2PeerConfiguredTimersTable | BGP4-V2-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.1.1.2.4.2.1 | jnxBgpM2PeerConfiguredTimersEntry | BGP4-V2-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.1.1.2.4.2.1.2 | jnxBgpM2PeerHoldTimeConfigured | BGP4-V2-MIB-JUNIPER |