ALCATEL-IND1-RIPNG-MIB

All MIBs › ALCATEL-IND1-RIPNG-MIB

Organization: Alcatel-Lucent

Last Updated: 2007-04-03

Category: Routing Protocols, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch RIPng routing protocol MIB for managing IPv6 RIP interfaces and route redistribution policies.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-RIPNG-MIB?

This is an Alcatel-Lucent enterprise MIB (part of the "Birds Of Prey" OmniSwitch product line) that manages the RIPng (RIP for IPv6) routing protocol configuration on Alcatel switches and routers. It exposes configuration and operational data for RIPng-enabled interfaces, route redistribution/filtering policies, route summarization, peer relationships, and the learned RIPng route table. While primarily a routing-protocol configuration MIB, it does support monitoring of protocol health and status, including whether the RIPng process is enabled/running (alaProtocolRipng), interface-level RIPng state, and peer adjacency status, alongside fault notifications via alcatelIND1RIPNGTraps. It is an enterprise extension that complements standard IPv6 routing and RIP conventions rather than replacing them, since it is specifically the Alcatel implementation of RIPng. It's typically deployed on Alcatel-Lucent OmniSwitch campus/enterprise switches running dual-stack or IPv6-only networks where RIPng serves as an interior routing protocol, and an ALCATEL-IND1-RIPNG-MIB download helps administrators confirm RIPng adjacencies and route redistribution behave as expected.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-RIPNG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent OmniSwitch enterprise switches/routers

Monitoring Examples

An administrator could poll alaRipngInterfaceTable/alaRipngInterfaceEntry to confirm which interfaces have RIPng enabled and check alaRipngPeerTable for active RIPng neighbor adjacencies. Comparing entries in alaRipngRouteTable against expected routes would reveal route flapping or missing redistributed routes, while alaRipngRouteFilterTable and alaRipngSummarizationTable show whether filtering/summarization policies are suppressing expected prefixes. A sudden drop in alaRipngPeerTable entries combined with an alcatelIND1RIPNGTraps notification would indicate a lost RIPng adjacency needing investigation.

What Can Be Monitored

RIPng interface configuration
RIPng route filter policies
RIPng route summarization
RIPng peer/neighbor status
learned RIPng routes
RIPng protocol enable state

Imported Objects

From ALCATEL-IND1-BASE

routingIND1Ripng

OBJECT-IDENTITY

From IPV6-TC

Ipv6Address
Ipv6AddressPrefix

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
alaProtocolRipng	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1
alaRipngDebug	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2
INT alaRipngDebugAge	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.7	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipngDebugAge MIB Object of alaDrcTmRipngDebug Configuration
INT alaRipngDebugAll	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.16	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipngDebugAll MIB Object of alaDrcTmRipngDebug Configuration
INT alaRipngDebugError	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.2	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipngDebugError MIB Object of alaDrcTmRipngDebug Configuration
alaRipngDebugGroup	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.1.2			Collection of Miscellaneous objects for management of RIP.
INT alaRipngDebugInfo	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.9	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipngDebugInfo MIB Object of alaDrcTmRipngDebug Configuration
I32 alaRipngDebugLevel	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.1	Integer32	read-write	This Object is deprecated in favour of alaDrcTmRipngDebur Configuration
INT alaRipngDebugMip	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.8	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipngDebugMip MIB Object of alaDrcTmRipngDebug Configuration
INT alaRipngDebugNexthopFilter	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.14	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipngDebugNexthopFilter MIB Object of alaDrcTmRipngDebug Configuration
INT alaRipngDebugRdb	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.6	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipngDebugRdb MIB Object of alaDrcTmRipngDebug Configuration
INT alaRipngDebugRecv	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.4	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipngDebugRecv MIB Object of alaDrcTmRipngDebug Configuration
INT alaRipngDebugRouteFilter	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.13	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipngDebugRouteFilter MIB Object of alaDrcTmRipngDebug Configuration
INT alaRipngDebugSend	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.5	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipngDebugSend MIB Object of alaDrcTmRipngDebug Configuration
INT alaRipngDebugSetup	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.10	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipngDebugSetup MIB Object of alaDrcTmRipngDebug Configuration
INT alaRipngDebugSummary	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.15	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipngDebugSummary MIB Object of alaDrcTmRipngDebug Configuration
INT alaRipngDebugTime	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.11	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipngDebugTime MIB Object of alaDrcTmRipngDebug Configuration
INT alaRipngDebugTm	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.12	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipngDebugTm MIB Object of alaDrcTmRipngDebug Configuration
INT alaRipngDebugWarn	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.2.3	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipngDebugWarning MIB Object of alaDrcTmRipngDebug Configuration
I32 alaRipngGarbageTimer	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.5	Integer32	read-write	Time to keep a route before garbage collection.
alaRipngGlobalGroup	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.1.1			Collection of Miscellaneous objects for management of RIP.
I32 alaRipngGlobalRouteTag	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.7	Integer32	read-write	The route tag that will be added to all RIPng entries
I32 alaRipngHolddownTimer	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.4	Integer32	read-write	Time to keep a route in the holddown state.
alaRipngInterfaceEntry	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1		not-accessible	Each individual interface.
alaRipngInterfaceGroup	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.1.3			Collection of Miscellaneous objects for management of RIP.
INT alaRipngInterfaceHorizon	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.6	INTEGER	read-write	Controls use of split horizon on this interface.
I32 alaRipngInterfaceIndex	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.2	Integer32	not-accessible	IPv6 index of this interface.
I32 alaRipngInterfaceJitter	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.11	Integer32	read-write	Deprecated in favour of alaRipngJitter
I32 alaRipngInterfaceMetric	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.3	Integer32	read-write	Metric used on this interface.
C32 alaRipngInterfaceMTU	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.9	Counter32	read-only	Max Transfer size of RIPng packets on this interface
TIK alaRipngInterfaceNextUpdate	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.10	TimeTicks	read-only	Seconds remaining for the next update on this interface
I32 alaRipngInterfacePacketsRcvd	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.8	Integer32	read-only	# of packets received on this interface.
I32 alaRipngInterfacePacketsSent	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.7	Integer32	read-only	# of packets sent on this interface.
INT alaRipngInterfaceRecvStatus	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.4	INTEGER	read-write	Controls whether or not to recv updates on this intf.
INT alaRipngInterfaceSendStatus	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.5	INTEGER	read-write	Controls whether or not to send updates on this intf.
ROW alaRipngInterfaceStatus	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.1	RowStatus	read-write	Create/delete RIPng interfaces.
alaRipngInterfaceTable	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11		not-accessible	RIPng interfaces.
I32 alaRipngInvalidTimer	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.3	Integer32	read-write	Time in seconds that a route will remain active in RIB before being moved to the invalid state. The value must be at least three times the update interval. The defined range of 1 to 360 allows backwards compatibility with older devices which do not enforce the three-times constraint. For newer devices which enforce the three-times constraint with the update interval, the minimum allowed value of the invalid timer is 3.
I32 alaRipngJitter	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.9	Integer32	read-write	Jitter to use when sending updates. The value must be less than one-half the update interval.
ADR alaRipngNexthopFilterAddress	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.12.1.2	Ipv6Address	read-write	Address of router to filter routes from.
alaRipngNexthopFilterEntry	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.12.1		not-accessible	Each individual Nexthop filter.
alaRipngNexthopFilterGroup	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.1.4			Collection of Miscellaneous objects for management of RIP.
ROW alaRipngNexthopFilterStatus	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.12.1.1	RowStatus	read-write	Create/delete RIPng Nexthop Filter.
alaRipngNexthopFilterTable	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.12		not-accessible	RIPng Nexthop filters.
ADR alaRipngPeerAddress	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1.1	Ipv6Address	not-accessible	Address of peer.
C32 alaRipngPeerBadPackets	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1.5	Counter32	read-only	Total # of bad packets received.
C32 alaRipngPeerBadRoutes	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1.6	Counter32	read-only	Total # of bad routes received.
alaRipngPeerEntry	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1		not-accessible	Each individual peer.
alaRipngPeerGroup	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.1.7			Collection of Miscellaneous objects for management of RIP.
I32 alaRipngPeerIndex	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1.7	Integer32	not-accessible	IPv6 index of the interface on which this peer is seen
TIK alaRipngPeerLastUpdate	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1.2	TimeTicks	read-only	Last Update received.
C32 alaRipngPeerNumRoutes	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1.4	Counter32	read-only	Total # of routes received from this peer.
C32 alaRipngPeerNumUpdates	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1.3	Counter32	read-only	Total # of updates received from this peer.
alaRipngPeerTable	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15		not-accessible	RIPng peers.
I32 alaRipngPort	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.10	Integer32	read-write	Port to send/receive packets on.
INT alaRipngProtoStatus	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.1	INTEGER	read-write	Global administration status of RIPng.
TIK alaRipngRouteAge	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.5	TimeTicks	read-only	The number of seconds since this route was last updated or otherwise determined to be correct.
I32 alaRipngRouteCount	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.6	Integer32	read-only	The number of network routes in RIPng routing table.
alaRipngRouteEntry	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1		not-accessible	Ripng routing table which contains the network routes
INT alaRipngRouteFilterDirection	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.14.1.4	INTEGER	read-write	Which way to apply the filter.
alaRipngRouteFilterEntry	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.14.1		not-accessible	Each individual route filter.
alaRipngRouteFilterGroup	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.1.6			Collection of Miscellaneous objects for management of RIP.
ADR alaRipngRouteFilterPrefix	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.14.1.2	Ipv6AddressPrefix	read-write	Prefix of filter.
I32 alaRipngRouteFilterPrefixLen	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.14.1.3	Integer32	read-write	Prefix length of filter.
ROW alaRipngRouteFilterStatus	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.14.1.1	RowStatus	read-write	Create/delete RIPng route Filter.
INT alaRipngRouteFilterSubnets	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.14.1.5	INTEGER	read-write	Include subnets?
alaRipngRouteFilterTable	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.14		not-accessible	RIPng route filters.
INT alaRipngRouteFlags	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.9	INTEGER	read-only	The assocated flags for this route.
alaRipngRouteGroup	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.1.8			Collection of Miscellaneous objects for management of RIP.
I32 alaRipngRouteIndex	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.10	Integer32	read-only	IPv6 index of the interface on which the route gateway can be reached
I32 alaRipngRouteMetric	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.7	Integer32	read-only	The routing metric for this route.
ADR alaRipngRouteNextHop	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.3	Ipv6Address	not-accessible	The address of the next hop to reach this route.
ADR alaRipngRoutePrefix	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.1	Ipv6AddressPrefix	not-accessible	The destination IP address of this route.
I32 alaRipngRoutePrefixLen	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.2	Integer32	not-accessible	The prefix length for this route.
ROW alaRipngRouteStatus	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.8	RowStatus	read-only	The row status variable, used according to row installation and removal conventions.
alaRipngRouteTable	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16		not-accessible	Ripng routing table which contains the routes.
I32 alaRipngRouteTag	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.6	Integer32	read-only	The associated route tag
INT alaRipngRouteType	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.4	INTEGER	read-only	The type of route.
alaRipngSummarizationEntry	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.13.1		not-accessible	Each individual Nexthop filter.
alaRipngSummarizationGroup	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.1.5			Collection of Miscellaneous objects for management of RIP.
ADR alaRipngSummarizationPrefix	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.13.1.4	Ipv6AddressPrefix	read-write	Prefix of summarized route.
I32 alaRipngSummarizationPrefixLen	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.13.1.5	Integer32	read-write	Prefix length of summarized route.
ADR alaRipngSummarizationSourcePrefix	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.13.1.2	Ipv6AddressPrefix	read-write	Prefix of network to use a the source of a summarization.
I32 alaRipngSummarizationSourcePrefixLen	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.13.1.3	Integer32	read-write	Prefix length of source prefix.
ROW alaRipngSummarizationStatus	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.13.1.1	RowStatus	read-write	Create/delete RIPng Summarization Filter.
INT alaRipngSummarizationSubnets	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.13.1.6	INTEGER	read-write	Include subnets?
alaRipngSummarizationTable	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.13		not-accessible	RIPng Nexthop filters.
INT alaRipngTriggeredSends	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.8	INTEGER	read-write	Controls whether trigged updates contain entire RIB or just changes.
I32 alaRipngUpdateInterval	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.2	Integer32	read-write	Interval (in seconds) that RIPng routing updates will be sent out. The value must be less than or equal to one-third the the invalid timer and greater or equal to two times the jitter value.
alcatelIND1RIPMIBCompliance	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.2.1			Compliance statement for RIPng subsystem.
alcatelIND1RIPNGMIB	1.3.6.1.4.1.6486.801.1.2.1.10.12.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Configuration Of Global RIPNG Configuration Parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1RIPNGMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.2			Branch for Routing Information Protocol (RIPNG) Subsystem Compliance Statements.
alcatelIND1RIPNGMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2			Branch for Routing Information Protocol (RIPNG) Subsystem Conformance Information.
alcatelIND1RIPNGMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.1			Branch for Routing Information Protocol (RIPNG) Subsystem Units Of Conformance.
alcatelIND1RIPNGMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1			Branch for Routing Information Protocol (RIPNG) Subsystem Managed Objects.
alcatelIND1RIPNGTraps	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.3
alcatelIND1RIPNGTrapsRoot	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.3.0
NTF ripngRouteMaxLimitReached	1.3.6.1.4.1.6486.801.1.2.1.10.12.1.3.0.1			This notification is generated as RIPng database reached supported maximum entries. RIPng will discard any new updates.

RFC description

Vendor-private MIB for Alcatel-Lucent Internetworking Operating System (IOS) RIPng protocol implementation, monitoring IPv6 RIPng routing statistics and neighbor information.

Start monitoring Alcatel-Lucent enterprise switches/routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-RIPNG-MIB

What Is ALCATEL-IND1-RIPNG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description