All MIBs › BGP4-V2-MIB-JUNIPER › jnxBgpM2PeerKeepAlive
jnxBgpM2PeerKeepAlive
Module: BGP4-V2-MIB-JUNIPER
OID (symbolic): BGP4-V2-MIB-JUNIPER::jnxBgpM2PeerKeepAlive
OID (numeric): 1.3.6.1.4.1.2636.5.1.1.2.4.3.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with jnxBgpM2PeerHoldTime, it has the same proportion as what jnxBgpM2PeerKeepAliveConfigured has when compared with jnxBgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of jnxBgpM2PeerKeepAliveConfigured is zero (0).
This value is only defined when the peering session is in the Established state.
What is jnxBgpM2PeerKeepAlive?
This is the negotiated keepalive interval (in seconds) calculated proportionally from the actual Hold Time and configured KeepAlive ratio. Specifies how often KEEPALIVE messages must be sent to keep the session active. Example: if negotiated Hold Time is 180 and KeepAlive ratio is 1:3, this value will be 60, meaning keepalives must arrive every 60 seconds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.5.1.1.2.4.3.1.2 snmpwalk -v2c -c public <target> BGP4-V2-MIB-JUNIPER::jnxBgpM2PeerKeepAlive
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.5.1.1.2.4.3.1.2.1 snmpget -v2c -c public <target> BGP4-V2-MIB-JUNIPER::jnxBgpM2PeerKeepAlive.1
Start monitoring Juniper Networks routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BGP4-V2-MIB-JUNIPER::jnxBgpM2PeerKeepAlive OID value, configure state conditions and alerts, and monitor any Juniper Networks routers from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.5 | jnxExperiment | JUNIPER-EXPERIMENT-MIB |
| 1.3.6.1.4.1.2636.5.1 | jnxBgpM2Experiment | JUNIPER-EXPERIMENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.5.1.1 | jnxBgpM2 | BGP4-V2-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.1.1.2 | jnxBgpM2Peer | BGP4-V2-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.1.1.2.4 | jnxBgpM2PeerTimers | BGP4-V2-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.1.1.2.4.3 | jnxBgpM2PeerNegotiatedTimersTable | BGP4-V2-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.1.1.2.4.3.1 | jnxBgpM2PeerNegotiatedTimersEntry | BGP4-V2-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.1.1.2.4.3.1.2 | jnxBgpM2PeerKeepAlive | BGP4-V2-MIB-JUNIPER |