All MIBs › BGP4-V2-MIB-JUNIPER › jnxBgpM2PeerKeepAliveConfigured
jnxBgpM2PeerKeepAliveConfigured
Module: BGP4-V2-MIB-JUNIPER
OID (symbolic): BGP4-V2-MIB-JUNIPER::jnxBgpM2PeerKeepAliveConfigured
OID (numeric): 1.3.6.1.4.1.2636.5.1.1.2.4.2.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in jnxBgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by jnxBgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of jnxBgpM2PeerHoldTimeConfigured.
If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
What is jnxBgpM2PeerKeepAliveConfigured?
This interval (in seconds, 0 or 1-21845) is configured for the local router and advertised in the OPEN message; the actual keepalive interval is calculated proportionally based on negotiated Hold Times. Determines the frequency of empty KEEPALIVE messages to keep the session alive. Example: if configured to 60 seconds and the peer's Hold Time is 180, keepalives transmit every 60 seconds to maintain the session.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.5.1.1.2.4.2.1.3 snmpwalk -v2c -c public <target> BGP4-V2-MIB-JUNIPER::jnxBgpM2PeerKeepAliveConfigured
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.5.1.1.2.4.2.1.3.1 snmpget -v2c -c public <target> BGP4-V2-MIB-JUNIPER::jnxBgpM2PeerKeepAliveConfigured.1
Start monitoring Juniper Networks routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BGP4-V2-MIB-JUNIPER::jnxBgpM2PeerKeepAliveConfigured OID value, configure state conditions and alerts, and monitor any Juniper Networks routers from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.5 | jnxExperiment | JUNIPER-EXPERIMENT-MIB |
| 1.3.6.1.4.1.2636.5.1 | jnxBgpM2Experiment | JUNIPER-EXPERIMENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.5.1.1 | jnxBgpM2 | BGP4-V2-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.1.1.2 | jnxBgpM2Peer | BGP4-V2-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.1.1.2.4 | jnxBgpM2PeerTimers | BGP4-V2-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.1.1.2.4.2 | jnxBgpM2PeerConfiguredTimersTable | BGP4-V2-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.1.1.2.4.2.1 | jnxBgpM2PeerConfiguredTimersEntry | BGP4-V2-MIB-JUNIPER |
| 1.3.6.1.4.1.2636.5.1.1.2.4.2.1.3 | jnxBgpM2PeerKeepAliveConfigured | BGP4-V2-MIB-JUNIPER |