ACD-ERP-MIB

All MIBs › ACD-ERP-MIB

Organization: Accedian Networks, Inc.

Last Updated: 2012-01-11

Category: Vendor: Accedian

Description: Manages Ethernet Ring Protection (ERP/G.8032) configuration and status on Accedian MetroNID devices for ring network resilience.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ACD-ERP-MIB?

ACD-ERP-MIB is a vendor-specific SNMP module from Accedian Networks for its MetroNID Ethernet demarcation devices, covering Ethernet Ring Protection (ERP, ITU-T G.8032) configuration and status used for ring-topology network resilience. It exposes a configuration table describing ring protection instances, including the Ring Protection Link (RPL) role and port, and various protection timers. Its monitoring value is primarily around software/protocol state rather than physical hardware — confirming ring protection is correctly configured (RPL role/port, revertive mode, hold-off/guard/WTR timers) so that the ring can properly fail over and recover, which is effectively fault-tolerance/service-status monitoring for the Ethernet ring. It builds on the ITU-T G.8032 Ethernet ring protection standard rather than proprietary Accedian-only concepts. It is deployed in metro Ethernet or carrier ring networks using Accedian MetroNID devices at ring nodes. Engineers can download the ACD-ERP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ACD-ERP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Accedian MetroNID Ethernet demarcation device

Monitoring Examples

The sample objects show an acdErpConfigTable/acdErpConfigEntry keyed by acdErpIndex, with fields such as acdErpConfigRPLRole, acdErpConfigRPLPort, acdErpConfigRevertive, acdErpConfigHoldOffTimer, acdErpConfigGuardTimer, and acdErpConfigWTRTimer. An administrator would poll this table to confirm each ring node's RPL role and timer settings are consistent across the ring, and a mismatched acdErpConfigRPLRole or an unexpectedly long acdErpConfigWTRTimer could explain slow or failed ring recovery after a link fault. This table is central to diagnosing G.8032 ring protection misbehavior on MetroNID devices.

What Can Be Monitored

ERP ring configuration name
RPL role and port
hold-off timer
guard timer
WTR (wait-to-restore) timer
revertive mode setting

Imported Objects

From ACCEDIAN-SMI

acdMibs

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
acdErp	1.3.6.1.4.1.22420.2.15			The ERP database for this Accedian Networks device.
acdErpCompliance	1.3.6.1.4.1.22420.2.15.1.1.1			The compliance statement for support of the ACD-ERP-MIB module.
acdErpCompliances	1.3.6.1.4.1.22420.2.15.1.1
acdErpConfig	1.3.6.1.4.1.22420.2.15.0.1
U32 acdErpConfigAPSVid	1.3.6.1.4.1.22420.2.15.0.1.1.1.11	Unsigned32	read-write	The APS VID.
acdErpConfigEntry	1.3.6.1.4.1.22420.2.15.0.1.1.1		not-accessible	An entry consisting of all settings for an instance.
acdErpConfigGroup	1.3.6.1.4.1.22420.2.15.1.2.1			Objects for the ERP configuration Group.
U32 acdErpConfigGuardTimer	1.3.6.1.4.1.22420.2.15.0.1.1.1.8	Unsigned32	read-write	The guard timer duration in ms.
U32 acdErpConfigHoldOffTimer	1.3.6.1.4.1.22420.2.15.0.1.1.1.6	Unsigned32	read-write	The hold off timer duration in ms.
STR acdErpConfigLAGPort	1.3.6.1.4.1.22420.2.15.0.1.1.1.16	DisplayString	read-write	The LAG port name
U32 acdErpConfigMDLevel	1.3.6.1.4.1.22420.2.15.0.1.1.1.10	Unsigned32	read-write	The maintenance domain level.
U32 acdErpConfigMep0Idx	1.3.6.1.4.1.22420.2.15.0.1.1.1.17	Unsigned32	read-write	The MEP0 port index.
U32 acdErpConfigMep1Idx	1.3.6.1.4.1.22420.2.15.0.1.1.1.18	Unsigned32	read-write	The MEP1 port index.
STR acdErpConfigName	1.3.6.1.4.1.22420.2.15.0.1.1.1.3	DisplayString	read-create	A unique name used to identify the instance
T/F acdErpConfigRevertive	1.3.6.1.4.1.22420.2.15.0.1.1.1.7	TruthValue	read-write	This indicates if the ERP is in revertive state.
ROW acdErpConfigRowStatus	1.3.6.1.4.1.22420.2.15.0.1.1.1.2	RowStatus	read-create	All columns must have a valid value before a row can be activated. To create a new Service you shall provide a unique name for an empty row with the RowStatus set to Create and Go.
U32 acdErpConfigRPLPort	1.3.6.1.4.1.22420.2.15.0.1.1.1.5	Unsigned32	read-write	The index of the port used as RPL.
STR acdErpConfigRPLRole	1.3.6.1.4.1.22420.2.15.0.1.1.1.4	DisplayString	read-write	RPL role (Owner, Neighbor or None).
acdErpConfigTable	1.3.6.1.4.1.22420.2.15.0.1.1		not-accessible	This table contains all instance of ERP of this unit.
OCT acdErpConfigVids0to1023	1.3.6.1.4.1.22420.2.15.0.1.1.1.12	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpConfigVids1024to2047	1.3.6.1.4.1.22420.2.15.0.1.1.1.13	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpConfigVids2048to3071	1.3.6.1.4.1.22420.2.15.0.1.1.1.14	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpConfigVids3072to4095	1.3.6.1.4.1.22420.2.15.0.1.1.1.15	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
U32 acdErpConfigWTRTimer	1.3.6.1.4.1.22420.2.15.0.1.1.1.9	Unsigned32	read-write	The WTR timer duration in minutes.
acdErpConformance	1.3.6.1.4.1.22420.2.15.1
acdErpCounter	1.3.6.1.4.1.22420.2.15.0.2
acdErpCounterEntry	1.3.6.1.4.1.22420.2.15.0.2.1.1		not-accessible	An entry consisting of all counters for an instance.
acdErpCounterGroup	1.3.6.1.4.1.22420.2.15.1.2.2			Objects for the ERP Counter Group.
U32 acdErpCounterIndex	1.3.6.1.4.1.22420.2.15.0.2.1.1.1	Unsigned32	not-accessible	An index that uniquely identifies this instance.
U32 acdErpCounterPort0DropGuard	1.3.6.1.4.1.22420.2.15.0.2.1.1.18	Unsigned32	read-only	The number of messages dropped because of the guard timer.
U32 acdErpCounterPort0DropMismatch	1.3.6.1.4.1.22420.2.15.0.2.1.1.20	Unsigned32	read-only	The number of messages dropped because of erp version mismatch.
U32 acdErpCounterPort0DropUnknown	1.3.6.1.4.1.22420.2.15.0.2.1.1.19	Unsigned32	read-only	The number of messages dropped because of unrecognized op codes.
U32 acdErpCounterPort0LocalClear	1.3.6.1.4.1.22420.2.15.0.2.1.1.2	Unsigned32	read-only	The number of local clear event processed.
U32 acdErpCounterPort0LocalFs	1.3.6.1.4.1.22420.2.15.0.2.1.1.3	Unsigned32	read-only	The number of local force switch event processed.
U32 acdErpCounterPort0LocalMs	1.3.6.1.4.1.22420.2.15.0.2.1.1.5	Unsigned32	read-only	The number of local manual switch event processed.
U32 acdErpCounterPort0LocalSf	1.3.6.1.4.1.22420.2.15.0.2.1.1.4	Unsigned32	read-only	The number of local signal failed event processed.
U32 acdErpCounterPort0RxAps	1.3.6.1.4.1.22420.2.15.0.2.1.1.6	Unsigned32	read-only	The number of APS messages received.
U32 acdErpCounterPort0RxApsFs	1.3.6.1.4.1.22420.2.15.0.2.1.1.7	Unsigned32	read-only	The number of force switch messages received.
U32 acdErpCounterPort0RxApsMs	1.3.6.1.4.1.22420.2.15.0.2.1.1.9	Unsigned32	read-only	The number of manual switch messages received.
U32 acdErpCounterPort0RxApsNr	1.3.6.1.4.1.22420.2.15.0.2.1.1.11	Unsigned32	read-only	The number of no request messages received.
U32 acdErpCounterPort0RxApsNrRb	1.3.6.1.4.1.22420.2.15.0.2.1.1.10	Unsigned32	read-only	The number of no request RPL blocked messages received.
U32 acdErpCounterPort0RxApsSf	1.3.6.1.4.1.22420.2.15.0.2.1.1.8	Unsigned32	read-only	The number of signal failed messages received.
U32 acdErpCounterPort0TxAps	1.3.6.1.4.1.22420.2.15.0.2.1.1.12	Unsigned32	read-only	The number of APS messages transmitted.
U32 acdErpCounterPort0TxApsFs	1.3.6.1.4.1.22420.2.15.0.2.1.1.13	Unsigned32	read-only	The number of force switch messages transmitted.
U32 acdErpCounterPort0TxApsMs	1.3.6.1.4.1.22420.2.15.0.2.1.1.15	Unsigned32	read-only	The number of manual switch messages transmitted.
U32 acdErpCounterPort0TxApsNr	1.3.6.1.4.1.22420.2.15.0.2.1.1.17	Unsigned32	read-only	The number of no request messages transmitted.
U32 acdErpCounterPort0TxApsNrRb	1.3.6.1.4.1.22420.2.15.0.2.1.1.16	Unsigned32	read-only	The number of no request RPL blocked messages transmitted.
U32 acdErpCounterPort0TxApsSf	1.3.6.1.4.1.22420.2.15.0.2.1.1.14	Unsigned32	read-only	The number of signal failed messages transmitted.
U32 acdErpCounterPort1DropGuard	1.3.6.1.4.1.22420.2.15.0.2.1.1.37	Unsigned32	read-only	The number of messages dropped because of the guard timer.
U32 acdErpCounterPort1DropMismatch	1.3.6.1.4.1.22420.2.15.0.2.1.1.39	Unsigned32	read-only	The number of messages dropped because of erp version mismatch.
U32 acdErpCounterPort1DropUnknown	1.3.6.1.4.1.22420.2.15.0.2.1.1.38	Unsigned32	read-only	The number of messages dropped because of unrecognized op codes.
U32 acdErpCounterPort1LocalClear	1.3.6.1.4.1.22420.2.15.0.2.1.1.21	Unsigned32	read-only	The number of local clear event processed.
U32 acdErpCounterPort1LocalFs	1.3.6.1.4.1.22420.2.15.0.2.1.1.22	Unsigned32	read-only	The number of local force switch event processed.
U32 acdErpCounterPort1LocalMs	1.3.6.1.4.1.22420.2.15.0.2.1.1.24	Unsigned32	read-only	The number of local manual switch event processed.
U32 acdErpCounterPort1LocalSf	1.3.6.1.4.1.22420.2.15.0.2.1.1.23	Unsigned32	read-only	The number of local signal failed event processed.
U32 acdErpCounterPort1RxAps	1.3.6.1.4.1.22420.2.15.0.2.1.1.25	Unsigned32	read-only	The number of APS messages received.
U32 acdErpCounterPort1RxApsFs	1.3.6.1.4.1.22420.2.15.0.2.1.1.26	Unsigned32	read-only	The number of force switch messages received.
U32 acdErpCounterPort1RxApsMs	1.3.6.1.4.1.22420.2.15.0.2.1.1.28	Unsigned32	read-only	The number of manual switch messages received.
U32 acdErpCounterPort1RxApsNr	1.3.6.1.4.1.22420.2.15.0.2.1.1.30	Unsigned32	read-only	The number of no request messages received.
U32 acdErpCounterPort1RxApsNrRb	1.3.6.1.4.1.22420.2.15.0.2.1.1.29	Unsigned32	read-only	The number of no request RPL blocked messages received.
U32 acdErpCounterPort1RxApsSf	1.3.6.1.4.1.22420.2.15.0.2.1.1.27	Unsigned32	read-only	The number of signal failed messages received.
U32 acdErpCounterPort1TxAps	1.3.6.1.4.1.22420.2.15.0.2.1.1.31	Unsigned32	read-only	The number of APS messages transmitted.
U32 acdErpCounterPort1TxApsFs	1.3.6.1.4.1.22420.2.15.0.2.1.1.32	Unsigned32	read-only	The number of force switch messages transmitted.
U32 acdErpCounterPort1TxApsMs	1.3.6.1.4.1.22420.2.15.0.2.1.1.34	Unsigned32	read-only	The number of manual switch messages transmitted.
U32 acdErpCounterPort1TxApsNr	1.3.6.1.4.1.22420.2.15.0.2.1.1.36	Unsigned32	read-only	The number of no request messages transmitted.
U32 acdErpCounterPort1TxApsNrRb	1.3.6.1.4.1.22420.2.15.0.2.1.1.35	Unsigned32	read-only	The number of no request RPL blocked messages transmitted.
U32 acdErpCounterPort1TxApsSf	1.3.6.1.4.1.22420.2.15.0.2.1.1.33	Unsigned32	read-only	The number of signal failed messages transmitted.
acdErpCounterTable	1.3.6.1.4.1.22420.2.15.0.2.1		not-accessible	This table contains all instance of ERP of this unit.
acdErpGroups	1.3.6.1.4.1.22420.2.15.1.2
U32 acdErpIndex	1.3.6.1.4.1.22420.2.15.0.1.1.1.1	Unsigned32	not-accessible	Unique value for each instance.
acdErpMIBObjects	1.3.6.1.4.1.22420.2.15.0
ACD acdErpPort0State	1.3.6.1.4.1.22420.2.15.0.3.1.1.9	AcdErpPortStateType	read-only	The state of Port 0.
ACD acdErpPort0Status	1.3.6.1.4.1.22420.2.15.0.3.1.1.8	AcdErpPortStatusType	read-only	The status of Port 0.
ACD acdErpPort1State	1.3.6.1.4.1.22420.2.15.0.3.1.1.11	AcdErpPortStateType	read-only	The state of Port 1.
ACD acdErpPort1Status	1.3.6.1.4.1.22420.2.15.0.3.1.1.10	AcdErpPortStatusType	read-only	The status of Port 1.
acdErpStatus	1.3.6.1.4.1.22420.2.15.0.3
acdErpStatusEntry	1.3.6.1.4.1.22420.2.15.0.3.1.1		not-accessible	An entry consisting of all status for an instance
acdErpStatusGroup	1.3.6.1.4.1.22420.2.15.1.2.3			Objects for the ERP Status Group.
U32 acdErpStatusIdx	1.3.6.1.4.1.22420.2.15.0.3.1.1.1	Unsigned32	not-accessible	Unique index for each service instance.
STR acdErpStatusName	1.3.6.1.4.1.22420.2.15.0.3.1.1.2	DisplayString	read-only	A unique name used to identify the instance.
MAC acdErpStatusNodeId	1.3.6.1.4.1.22420.2.15.0.3.1.1.3	MacAddress	read-only	The instance node ID.
U32 acdErpStatusRequest	1.3.6.1.4.1.22420.2.15.0.3.1.1.7	Unsigned32	read-only	The ERP latest top priority request.
MAC acdErpStatusRequestNodeId	1.3.6.1.4.1.22420.2.15.0.3.1.1.6	MacAddress	read-only	The ERP latest top priority request node ID.
MAC acdErpStatusRPLNodeId	1.3.6.1.4.1.22420.2.15.0.3.1.1.4	MacAddress	read-only	The RPL node ID.
ACD acdErpStatusState	1.3.6.1.4.1.22420.2.15.0.3.1.1.5	AcdErpStateType	read-only	The ERP state.
acdErpStatusTable	1.3.6.1.4.1.22420.2.15.0.3.1		not-accessible	This table contains all instance of ERP of this unit.
acdErpVlanFdb	1.3.6.1.4.1.22420.2.15.0.4
acdErpVlanFdbEntry	1.3.6.1.4.1.22420.2.15.0.4.1.1		not-accessible	An entry consisting of all vlan fdb info for an instance
OCT acdErpVlanFdbFlappingVids0to1023	1.3.6.1.4.1.22420.2.15.0.4.1.1.14	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpVlanFdbFlappingVids1024to2047	1.3.6.1.4.1.22420.2.15.0.4.1.1.15	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpVlanFdbFlappingVids2048to3071	1.3.6.1.4.1.22420.2.15.0.4.1.1.16	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpVlanFdbFlappingVids3072to4095	1.3.6.1.4.1.22420.2.15.0.4.1.1.17	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpVlanFdbFloodingVids0to1023	1.3.6.1.4.1.22420.2.15.0.4.1.1.10	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpVlanFdbFloodingVids1024to2047	1.3.6.1.4.1.22420.2.15.0.4.1.1.11	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpVlanFdbFloodingVids2048to3071	1.3.6.1.4.1.22420.2.15.0.4.1.1.12	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpVlanFdbFloodingVids3072to4095	1.3.6.1.4.1.22420.2.15.0.4.1.1.13	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
acdErpVlanFdbGroup	1.3.6.1.4.1.22420.2.15.1.2.4			Objects for the Erp vlan forwarding Group.
U32 acdErpVlanFdbIdx	1.3.6.1.4.1.22420.2.15.0.4.1.1.1	Unsigned32	not-accessible	Unique index for each instance.
OCT acdErpVlanFdbPort0Vids0to1023	1.3.6.1.4.1.22420.2.15.0.4.1.1.2	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpVlanFdbPort0Vids1024to2047	1.3.6.1.4.1.22420.2.15.0.4.1.1.3	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpVlanFdbPort0Vids2048to3071	1.3.6.1.4.1.22420.2.15.0.4.1.1.4	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpVlanFdbPort0Vids3072to4095	1.3.6.1.4.1.22420.2.15.0.4.1.1.5	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpVlanFdbPort1Vids0to1023	1.3.6.1.4.1.22420.2.15.0.4.1.1.6	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpVlanFdbPort1Vids1024to2047	1.3.6.1.4.1.22420.2.15.0.4.1.1.7	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpVlanFdbPort1Vids2048to3071	1.3.6.1.4.1.22420.2.15.0.4.1.1.8	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
OCT acdErpVlanFdbPort1Vids3072to4095	1.3.6.1.4.1.22420.2.15.0.4.1.1.9	OCTET STRING	read-only	Each octet specifies a set of eight VLANs, the first octet specifying VLAN ID 0 through 7, and so on. Within each octet, the most significant bit represents the lowest numbered VLAN ID. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included otherwise.
acdErpVlanFdbTable	1.3.6.1.4.1.22420.2.15.0.4.1		not-accessible	This table contains all instance of ERP of this unit.

RFC description

Manages Ethernet Ring Protection configuration and status for Accedian devices.

Start monitoring Accedian MetroNID devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ACD-ERP-MIB

What Is ACD-ERP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description