ACD-SFP-MIB

All MIBs › ACD-SFP-MIB

Organization: Accedian Networks, Inc.

Last Updated: 2010-11-10

Category: Vendor: Accedian

Description: Monitors SFP (Small Form-factor Pluggable) transceiver optical parameters on Accedian MetroNID Ethernet performance devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ACD-SFP-MIB?

ACD-SFP-MIB is a vendor-specific SNMP module from Accedian Networks for its MetroNID Ethernet performance monitoring devices, exposing an inventory of installed SFP (Small Form-factor Pluggable) transceiver modules and their optical/vendor identity parameters. It exposes hardware inventory data such as vendor name, part number, revision, wavelength, and serial number for each installed SFP. Its monitoring value is squarely hardware-status oriented — it lets an operator confirm which transceiver hardware is physically installed in each port and detect unsupported, mismatched, or aging optics, and it also defines notification objects for transceiver-related events (e.g., insertion/removal or fault). It is a self-contained hardware inventory MIB with no strong dependency on other standard MIBs beyond general SNMP conventions. It is deployed on Accedian MetroNID devices used for Ethernet service demarcation and performance monitoring in metro/access networks, where ACD-SFP-MIB SNMP monitoring helps operators track optics health across the fleet.

IPNetwork Monitor allows you to monitor SNMP objects defined in ACD-SFP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Accedian MetroNID Ethernet performance device

Monitoring Examples

The acdSfpInfoTable/acdSfpInfoEntry, indexed by acdSfpInfoID and acdSfpInfoConnIdx, exposes fields like acdSfpInfoVendor, acdSfpInfoVendorOui, acdSfpInfoVendorPn, acdSfpInfoVendorRev, acdSfpInfoWavelength, and acdSfpInfoSerialNum. An administrator would poll this table to inventory installed optics across a device's ports and flag any SFP whose acdSfpInfoVendor or acdSfpInfoWavelength doesn't match the expected type for that link, which could explain a link that won't establish due to an incompatible transceiver. The acdSfpNotifications group would also be used to alert on SFP insertion, removal, or fault events.

What Can Be Monitored

installed SFP vendor and part number
SFP wavelength
SFP serial number
SFP connector type
transceiver insertion/removal events

Imported Objects

From ACCEDIAN-SMI

acdMibs

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
acdSfp	1.3.6.1.4.1.22420.2.4			The SFPs database for this Accedian Networks device.
acdSfpInfoTable	1.3.6.1.4.1.22420.2.4.1		not-accessible	Table of all SFP info
acdSfpInfoEntry	1.3.6.1.4.1.22420.2.4.1.1		not-accessible	This is a part of the content of the SFP's 0xA0 EEPROM
U32 acdSfpInfoID	1.3.6.1.4.1.22420.2.4.1.1.1	Unsigned32	not-accessible	Unique value for each SFP. Its value ranges from 1 to MAXINT (4 bytes).
U32 acdSfpInfoConnIdx	1.3.6.1.4.1.22420.2.4.1.1.2	Unsigned32	read-only	This object identifies the connector index on the box. The index is assigned form left to rigth starting with 1.
INT acdSfpInfoConnType	1.3.6.1.4.1.22420.2.4.1.1.3	INTEGER	read-only	The connector value indicates the external optical or electrical cable connector provided as the media interface.
STR acdSfpInfoVendor	1.3.6.1.4.1.22420.2.4.1.1.4	DisplayString	read-only	The vendor name is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces (20h). The vendor name shall be the full name of the corporation, a commonly accepted abbreviation of the name of the corporation, the SCSI company code for the corporation, or the stock exchange code for the corporation. At least one of the vendor name or the vendor OUI fields shall contain valid serial data.
STR acdSfpInfoVendorOui	1.3.6.1.4.1.22420.2.4.1.1.5	DisplayString	read-only	The vendor organizationally unique identifier field (vendor OUI) is a 3-byte field that contains the IEEE Company Identifier for the vendor. A value of all zero in the 3-byte field indicates that the Vendor OUI is unspecified.
STR acdSfpInfoVendorPn	1.3.6.1.4.1.22420.2.4.1.1.6	DisplayString	read-only	The vendor part number (vendor PN) is a 16-byte field that contains ASCII characters, leftaligned and padded on the right with ASCII spaces (20h), defining the vendor's part number or product name. A value of all zero in the 16-byte field indicates that the vendor PN is unspecified.
STR acdSfpInfoVendorRev	1.3.6.1.4.1.22420.2.4.1.1.7	DisplayString	read-only	The vendor revision number (vendor rev) is a 4-byte field that contains ASCII characters, leftaligned and padded on the right with ASCII spaces (20h), defining the vendor's product revision number. A value of all zero in the 4-byte field indicates that the vendor PN is unspecified.
U32 acdSfpInfoWavelength	1.3.6.1.4.1.22420.2.4.1.1.8	Unsigned32	read-only	Nominal transmitter output wavelength at room temperature. 16 bit value with byte 60 as high order byte and byte 61 as low order byte. The laser wavelength is equal to the 16 bit integer value in nm. This field allows the user to read the laser wavelength directly, so it is not necessary to infer it from the transceiver Code for Electronic Compatibility.
STR acdSfpInfoSerialNum	1.3.6.1.4.1.22420.2.4.1.1.9	DisplayString	read-only	The vendor serial number (vendor SN) is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces (20h), defining the vendor's serial number for the transceiver. A value of all zero in the 16-byte field indicates that the vendor PN is unspecified.
U32 acdSfpInfoYear	1.3.6.1.4.1.22420.2.4.1.1.10	Unsigned32	read-only	This is the year of manufacturing.
U32 acdSfpInfoMonth	1.3.6.1.4.1.22420.2.4.1.1.11	Unsigned32	read-only	This is the month of manufacturing.
U32 acdSfpInfoDay	1.3.6.1.4.1.22420.2.4.1.1.12	Unsigned32	read-only	This is the day of manufacturing.
U32 acdSfpInfoLot	1.3.6.1.4.1.22420.2.4.1.1.13	Unsigned32	read-only	This is the Lot number of manufacturing.
INT acdSfpInfoRev8472	1.3.6.1.4.1.22420.2.4.1.1.14	INTEGER	read-only	This is to indicate to which revision this SFP is compatible.
T/F acdSfpInfoPresent	1.3.6.1.4.1.22420.2.4.1.1.15	TruthValue	read-only	This is to indicate if the SFP is present or not.
T/F acdSfpInfoDiag	1.3.6.1.4.1.22420.2.4.1.1.16	TruthValue	read-only	This is to indicate if the SFP supports Digital Diagnostics.
T/F acdSfpInfoInternal	1.3.6.1.4.1.22420.2.4.1.1.17	TruthValue	read-only	This is to indicate if the SFP supports internal calibration. If externally calibrated, the measurements are raw A/D values and must be converted to real world units using calibration constants stored in EEPROM locations 56 to 95 at 2 wire serial bus address A2h. Calibration is valid over vendor specified operating temperature and voltage. Alarm and warning threshold values should be interpreted in the same manner as real time 16 bit data.
T/F acdSfpInfoAlm	1.3.6.1.4.1.22420.2.4.1.1.18	TruthValue	read-only	This is to indicate if the SFP supports Alarm and warning thresholds for the Digital Diagnostics.
U32 acdSfpInfoIdType	1.3.6.1.4.1.22420.2.4.1.1.19	Unsigned32	read-only	The identifier value specifies the physical device described by the two-wire interface information. This value shall be included in the two-wire interface data (see SFF-8472 for details).
U32 acdSfpInfoExtIdType	1.3.6.1.4.1.22420.2.4.1.1.20	Unsigned32	read-only	The extended identifier value provides additional information about the transceiver. The field should be set to 04h for all SFP modules indicating two-wire interface ID module definition (see SFF-8472 for details).
STR acdSfpInfoTransCode	1.3.6.1.4.1.22420.2.4.1.1.21	DisplayString	read-only	The following bit significant indicators define the electronic or optical interfaces that are supported by the transceiver. At least one bit shall be set in this field (see SFF-8472 for details).
acdSfpDiagTable	1.3.6.1.4.1.22420.2.4.2		not-accessible	Table of all SFP Digital Diagnostics
acdSfpDiagEntry	1.3.6.1.4.1.22420.2.4.2.1		not-accessible	This is a part the content of the SFP's 0xA0 EEPROM
U32 acdSfpDiagID	1.3.6.1.4.1.22420.2.4.2.1.1	Unsigned32	not-accessible	Unique value for each SFP. Its value ranges from 1 to MAXINT (4 bytes).
U32 acdSfpDiagConnIdx	1.3.6.1.4.1.22420.2.4.2.1.2	Unsigned32	read-only	This object identifies the connector index on the box. The index is assigned form left to rigth starting with 1.
I32 acdSfpDiagTemp	1.3.6.1.4.1.22420.2.4.2.1.3	Integer32	read-only	Internally measured transceiver temperature. Represented as a 16 bit signed twos complement value in degrees Celsius, yielding a total range of -128C to +128C.
U32 acdSfpDiagVcc	1.3.6.1.4.1.22420.2.4.2.1.4	Unsigned32	read-only	Internally measured transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 to 65535) with LSB equal to 100 micro-Volt, yielding a total range of 0 to +6.55 Volts.
U32 acdSfpDiagLbc	1.3.6.1.4.1.22420.2.4.2.1.5	Unsigned32	read-only	Measured TX bias current in micro-Amps yielding a total range of 0 to 131 mA.
U32 acdSfpDiagTxPwr	1.3.6.1.4.1.22420.2.4.2.1.6	Unsigned32	read-only	Measured TX output power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
U32 acdSfpDiagRxPwr	1.3.6.1.4.1.22420.2.4.2.1.7	Unsigned32	read-only	Measured Rx input power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
STR acdSfpDiagTxPwrdBm	1.3.6.1.4.1.22420.2.4.2.1.8	DisplayString	read-only	Measured TX output power in dBm (~ -40 to +8.2 dBm).
STR acdSfpDiagRxPwrdBm	1.3.6.1.4.1.22420.2.4.2.1.9	DisplayString	read-only	Measured Rx input power in dBm (~ -40 to +8.2 dBm).
acdSfpThreshTable	1.3.6.1.4.1.22420.2.4.3		not-accessible	Table of all SFP Alarm and Warning Thresholds
acdSfpThreshEntry	1.3.6.1.4.1.22420.2.4.3.1		not-accessible	This is a part the content of the SFP's 0xA0 EEPROM
U32 acdSfpThreshID	1.3.6.1.4.1.22420.2.4.3.1.1	Unsigned32	not-accessible	Unique value for each SFP. Its value ranges from 1 to MAXINT (4 bytes).
U32 acdSfpThreshConnIdx	1.3.6.1.4.1.22420.2.4.3.1.2	Unsigned32	read-only	This object identifies the connector index on the box. The index is assigned form left to rigth starting with 1.
I32 acdSfpThreshTempHighAlm	1.3.6.1.4.1.22420.2.4.3.1.3	Integer32	read-only	High Alarm transceiver temperature. Represented as a 16 bit signed twos complement value in degrees Celsius, yielding a total range of -128C to +128C.
I32 acdSfpThreshTempLowAlm	1.3.6.1.4.1.22420.2.4.3.1.4	Integer32	read-only	Low Alarm transceiver temperature. Represented as a 16 bit signed twos complement value in degrees Celsius, yielding a total range of -128C to +128C.
I32 acdSfpThreshTempHighWarn	1.3.6.1.4.1.22420.2.4.3.1.5	Integer32	read-only	High Warning transceiver temperature. Represented as a 16 bit signed twos complement value in degrees Celsius, yielding a total range of -128C to +128C.
I32 acdSfpThreshTempLowWarn	1.3.6.1.4.1.22420.2.4.3.1.6	Integer32	read-only	Low Warning transceiver temperature. Represented as a 16 bit signed twos complement value in degrees Celsius, yielding a total range of -128C to +128C.
U32 acdSfpThreshVccHighAlm	1.3.6.1.4.1.22420.2.4.3.1.7	Unsigned32	read-only	High Alarm transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 to 65535) with LSB equal to 100 micro-Volt, yielding a total range of 0 to +6.55 Volts.
U32 acdSfpThreshVccLowAlm	1.3.6.1.4.1.22420.2.4.3.1.8	Unsigned32	read-only	Low Alarm transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 to 65535) with LSB equal to 100 micro-Volt, yielding a total range of 0 to +6.55 Volts.
U32 acdSfpThreshVccHighWarn	1.3.6.1.4.1.22420.2.4.3.1.9	Unsigned32	read-only	High Warning transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 to 65535) with LSB equal to 100 micro-Volt, yielding a total range of 0 to +6.55 Volts.
U32 acdSfpThreshVccLowWarn	1.3.6.1.4.1.22420.2.4.3.1.10	Unsigned32	read-only	Low Warning transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 to 65535) with LSB equal to 100 micro-Volt, yielding a total range of 0 to +6.55 Volts.
U32 acdSfpThreshLbcHighAlm	1.3.6.1.4.1.22420.2.4.3.1.11	Unsigned32	read-only	High Alarm TX bias current in micro-Amps yielding a total range of 0 to 131 mA.
U32 acdSfpThreshLbcLowAlm	1.3.6.1.4.1.22420.2.4.3.1.12	Unsigned32	read-only	Low Alarm TX bias current in micro-Amps yielding a total range of 0 to 131 mA.
U32 acdSfpThreshLbcHighWarn	1.3.6.1.4.1.22420.2.4.3.1.13	Unsigned32	read-only	High Warning TX bias current in micro-Amps yielding a total range of 0 to 131 mA.
U32 acdSfpThreshLbcLowWarn	1.3.6.1.4.1.22420.2.4.3.1.14	Unsigned32	read-only	Low Warning TX bias current in micro-Amps yielding a total range of 0 to 131 mA.
U32 acdSfpThreshTxPwrHighAlm	1.3.6.1.4.1.22420.2.4.3.1.15	Unsigned32	read-only	High Alarm TX output power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
U32 acdSfpThreshTxPwrLowAlm	1.3.6.1.4.1.22420.2.4.3.1.16	Unsigned32	read-only	Low Alarm TX output power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
U32 acdSfpThreshTxPwrHighWarn	1.3.6.1.4.1.22420.2.4.3.1.17	Unsigned32	read-only	High Warning TX output power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
U32 acdSfpThreshTxPwrLowWarn	1.3.6.1.4.1.22420.2.4.3.1.18	Unsigned32	read-only	Low Warning TX output power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
U32 acdSfpThreshRxPwrHighAlm	1.3.6.1.4.1.22420.2.4.3.1.19	Unsigned32	read-only	High Alarm RX input power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
U32 acdSfpThreshRxPwrLowAlm	1.3.6.1.4.1.22420.2.4.3.1.20	Unsigned32	read-only	Low Alarm RX input power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
U32 acdSfpThreshRxPwrHighWarn	1.3.6.1.4.1.22420.2.4.3.1.21	Unsigned32	read-only	High Warning RX input power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
U32 acdSfpThreshRxPwrLowWarn	1.3.6.1.4.1.22420.2.4.3.1.22	Unsigned32	read-only	Low Warning RX input power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
STR acdSfpThreshTxPwrHighAlmdBm	1.3.6.1.4.1.22420.2.4.3.1.23	DisplayString	read-only	High Alarm TX output power in dBm (~ -40 to +8.2 dBm).
STR acdSfpThreshTxPwrLowAlmdBm	1.3.6.1.4.1.22420.2.4.3.1.24	DisplayString	read-only	Low Alarm TX output power in dBm (~ -40 to +8.2 dBm).
STR acdSfpThreshTxPwrHighWarndBm	1.3.6.1.4.1.22420.2.4.3.1.25	DisplayString	read-only	High Warning TX output power in dBm (~ -40 to +8.2 dBm).
STR acdSfpThreshTxPwrLowWarndBm	1.3.6.1.4.1.22420.2.4.3.1.26	DisplayString	read-only	Low Warning TX output power in dBm (~ -40 to +8.2 dBm).
STR acdSfpThreshRxPwrHighAlmdBm	1.3.6.1.4.1.22420.2.4.3.1.27	DisplayString	read-only	High Alarm Rx input power in dBm (~ -40 to +8.2 dBm).
STR acdSfpThreshRxPwrLowAlmdBm	1.3.6.1.4.1.22420.2.4.3.1.28	DisplayString	read-only	Low Alarm Rx input power in dBm (~ -40 to +8.2 dBm).
STR acdSfpThreshRxPwrHighWarndBm	1.3.6.1.4.1.22420.2.4.3.1.29	DisplayString	read-only	High Warning Rx input power in dBm (~ -40 to +8.2 dBm).
STR acdSfpThreshRxPwrLowWarndBm	1.3.6.1.4.1.22420.2.4.3.1.30	DisplayString	read-only	Low Warning Rx input power in dBm (~ -40 to +8.2 dBm).
acdSfpThreshStatusTable	1.3.6.1.4.1.22420.2.4.4		not-accessible	Table of all SFP Digital Diagnostics Thresholds statuses
acdSfpThreshStatusEntry	1.3.6.1.4.1.22420.2.4.4.1		not-accessible	This is a part the content of the SFP's 0xA2 EEPROM
U32 acdSfpThreshStatusID	1.3.6.1.4.1.22420.2.4.4.1.1	Unsigned32	not-accessible	Unique value for each SFP. Its value ranges from 1 to MAXINT (4 bytes).
U32 acdSfpThreshStatusConnIdx	1.3.6.1.4.1.22420.2.4.4.1.2	Unsigned32	read-only	This object identifies the connector index on the box. The index is assigned form left to rigth starting with 1.
T/F acdSfpThreshStatusTempHighAlm	1.3.6.1.4.1.22420.2.4.4.1.3	TruthValue	read-only	This is to indicate if the temperature reaches or overpasses the High alarm threshold.
T/F acdSfpThreshStatusTempLowAlm	1.3.6.1.4.1.22420.2.4.4.1.4	TruthValue	read-only	This is to indicate if the temperature reaches or underpasses the Low alarm threshold.
T/F acdSfpThreshStatusTempHighWarn	1.3.6.1.4.1.22420.2.4.4.1.5	TruthValue	read-only	This is to indicate if the temperature reaches or overpasses the High warning threshold.
T/F acdSfpThreshStatusTempLowWarn	1.3.6.1.4.1.22420.2.4.4.1.6	TruthValue	read-only	This is to indicate if the temperature reaches or underpasses the Low warning threshold.
T/F acdSfpThreshStatusVccHighAlm	1.3.6.1.4.1.22420.2.4.4.1.7	TruthValue	read-only	This is to indicate if the supply voltage reaches or overpasses the High alarm threshold.
T/F acdSfpThreshStatusVccLowAlm	1.3.6.1.4.1.22420.2.4.4.1.8	TruthValue	read-only	This is to indicate if the supply voltage reaches or underpasses the Low alarm threshold.
T/F acdSfpThreshStatusVccHighWarn	1.3.6.1.4.1.22420.2.4.4.1.9	TruthValue	read-only	This is to indicate if the supply voltage reaches or overpasses the High warning threshold.
T/F acdSfpThreshStatusVccLowWarn	1.3.6.1.4.1.22420.2.4.4.1.10	TruthValue	read-only	This is to indicate if the supply voltage reaches or underpasses the Low warning threshold.
T/F acdSfpThreshStatusLbcHighAlm	1.3.6.1.4.1.22420.2.4.4.1.11	TruthValue	read-only	This is to indicate if the Laser Bias Current reaches or overpasses the High alarm threshold.
T/F acdSfpThreshStatusLbcLowAlm	1.3.6.1.4.1.22420.2.4.4.1.12	TruthValue	read-only	This is to indicate if the Laser Bias Current reaches or underpasses the Low alarm threshold.
T/F acdSfpThreshStatusLbcHighWarn	1.3.6.1.4.1.22420.2.4.4.1.13	TruthValue	read-only	This is to indicate if the Laser Bias Current reaches or overpasses the High warning threshold.
T/F acdSfpThreshStatusLbcLowWarn	1.3.6.1.4.1.22420.2.4.4.1.14	TruthValue	read-only	This is to indicate if the Laser Bias Current reaches or underpasses the Low warning threshold.
T/F acdSfpThreshStatusTxPwrHighAlm	1.3.6.1.4.1.22420.2.4.4.1.15	TruthValue	read-only	This is to indicate if the Transmit Power reaches or overpasses the High alarm threshold.
T/F acdSfpThreshStatusTxPwrLowAlm	1.3.6.1.4.1.22420.2.4.4.1.16	TruthValue	read-only	This is to indicate if the Transmit Power reaches or underpasses the Low alarm threshold.
T/F acdSfpThreshStatusTxPwrHighWarn	1.3.6.1.4.1.22420.2.4.4.1.17	TruthValue	read-only	This is to indicate if the Transmit Power reaches or overpasses the High warning threshold.
T/F acdSfpThreshStatusTxPwrLowWarn	1.3.6.1.4.1.22420.2.4.4.1.18	TruthValue	read-only	This is to indicate if the Transmit Power reaches or underpasses the Low warning threshold.
T/F acdSfpThreshStatusRxPwrHighAlm	1.3.6.1.4.1.22420.2.4.4.1.19	TruthValue	read-only	This is to indicate if the Receive Power reaches or overpasses the High alarm threshold.
T/F acdSfpThreshStatusRxPwrLowAlm	1.3.6.1.4.1.22420.2.4.4.1.20	TruthValue	read-only	This is to indicate if the Receive Power reaches or underpasses the Low alarm threshold.
T/F acdSfpThreshStatusRxPwrHighWarn	1.3.6.1.4.1.22420.2.4.4.1.21	TruthValue	read-only	This is to indicate if the Receive Power reaches or overpasses the High warning threshold.
T/F acdSfpThreshStatusRxPwrLowWarn	1.3.6.1.4.1.22420.2.4.4.1.22	TruthValue	read-only	This is to indicate if the Receive Power reaches or underpasses the Low warning threshold.
acdSfpNotifications	1.3.6.1.4.1.22420.2.4.5
acdSfpMIBObjects	1.3.6.1.4.1.22420.2.4.6
acdSfpConformance	1.3.6.1.4.1.22420.2.4.7
acdSfpCompliances	1.3.6.1.4.1.22420.2.4.7.1
acdSfpCompliance	1.3.6.1.4.1.22420.2.4.7.1.1			The compliance statement for support of the ACD-SFP-MIB module.
acdSfpGroups	1.3.6.1.4.1.22420.2.4.7.2
acdSfpInfoGroup	1.3.6.1.4.1.22420.2.4.7.2.1			Objects for the SFP information Group.
acdSfpDiagGroup	1.3.6.1.4.1.22420.2.4.7.2.2			Objects for the SFP diagnostics Group.
acdSfpThreshGroup	1.3.6.1.4.1.22420.2.4.7.2.3			Objects for the SFP thresholds Group.
acdSfpThreshStatusGroup	1.3.6.1.4.1.22420.2.4.7.2.4			Objects for the SFP threshold status Group.

RFC description

Accedian Networks SFP transceiver database MIB. Maintains SFP module information including identification, transmission codes, and EEPROM data.

Start monitoring Accedian MetroNID devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ACD-SFP-MIB

What Is ACD-SFP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description