ZXR10-MPLS-TE-MIB

All MIBs › ZXR10-MPLS-TE-MIB

Organization: Multiprotocol Label Switching (MPLS) Working Group

Last Updated: 2015-04-20

Category: ZTE ZXR10 MPLS and Traffic Engineering

Description: Manages ZTE ZXR10 MPLS Traffic Engineering tunnels, RSVP-TE signaling, and constraint-based path computation.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-MPLS-TE-MIB?

ZXR10-MPLS-TE-MIB is a ZTE implementation of the IETF MPLS Traffic Engineering MIB (originally published as RFC 3812, building on RSVP-TE extensions in RFC 3209 and constraint-based LDP setup in RFC 3212) for the ZXR10 platform. It exposes configuration and operational data for MPLS TE tunnels, including RSVP-TE signaling parameters and constraint-based path computation results. This MIB is used to monitor the software/protocol status of TE tunnels on the device — whether tunnels are signaled and up, and what path and bandwidth constraints they are using — which is central to verifying traffic-engineered paths are behaving as designed across the backbone. As a direct vendor implementation of a standards-track MIB, it has a strong dependency on the underlying MPLS and RSVP-TE standards it implements, and typically pairs with the ZXR10 MPLS-TE-FRR-MIB for protection. It is deployed on ZTE ZXR10 routers in service-provider MPLS core networks using traffic engineering for bandwidth guarantees and path control. Engineers can download the ZXR10-MPLS-TE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-MPLS-TE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 router

Monitoring Examples

No object names were captured for this MIB, so a specific table cannot be honestly cited; in practice an operator would poll the TE tunnel table for signaling status, actual/reserved bandwidth, and selected path, noticing a traffic-engineering problem if a tunnel fails to signal, falls back to a suboptimal path, or reports insufficient reservable bandwidth.

What Can Be Monitored

MPLS TE tunnel signaling status
reserved/actual tunnel bandwidth
constraint-based path selection
RSVP-TE session state

Imported Objects

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
StorageType
TimeStamp

From ZXR10-SMI

zxr10MplsTe

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxr10MplsTeMIB	1.3.6.1.4.1.3902.3.315.1			Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3812. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html This MIB module contains managed object definitions for MPLS Traffic Engineering (TE) as defined in: 1. Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 20012. Constraint-Based LSP Setup using LDP, Jamoussi (Editor), RFC 3212, January 2002 3. Requirements for Traffic Engineering Over MPLS, Awduche, D., Malcolm, J., Agogbua, J., O Dell, M., and J. McManus, [RFC2702], September 1999
zxr10MplsTeNotifications	1.3.6.1.4.1.3902.3.315.1.0
NTF zxr10MplsTunnelUp	1.3.6.1.4.1.3902.3.315.1.0.1			This notification is generated when a zxr10MplsTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into up state.
NTF zxr10MplsTunnelDown	1.3.6.1.4.1.3902.3.315.1.0.2			This notification is generated when a zxr10MplsTunnelOperStatus object for one of the configured tunnels is about to leave the up state and transition into down state.
NTF zxr10MplsLspUp	1.3.6.1.4.1.3902.3.315.1.0.3			This notification is generated when a zxr10MplsTunnelOperStatus object for one of the LSPs is about to leave the down state and transition into up state.
NTF zxr10MplsLspDown	1.3.6.1.4.1.3902.3.315.1.0.4			This notification is generated when a zxr10MplsTunnelOperStatus object for one of the LSPs is about to leave the up state and transition into down state.
NTF zxr10MplsLspChange	1.3.6.1.4.1.3902.3.315.1.0.5			This notification is generated when a tunnel is MBB.
NTF zxr10MplsTunnelUpcallNetmng	1.3.6.1.4.1.3902.3.315.1.0.6			This notification is generated when tunnel state changed, for example tunnel hotstandby bind or delete,tunnel creat successs, tunnel config success or fail...
zxr10MplsTeScalars	1.3.6.1.4.1.3902.3.315.1.1
INT zxr10MplsTunnelEnable	1.3.6.1.4.1.3902.3.315.1.1.1	INTEGER	read-only	If this object is true, then it enables the zxr10MplsTunnel.
U32 zxr10MplsTunnelConfiguredNum	1.3.6.1.4.1.3902.3.315.1.1.2	Unsigned32	read-only	The number of tunnels configured on this device. A tunnel is considered configured if the zxr10MplsTunnelRowStatus is active(1).
INT zxr10MplsTunnelTEDistProto	1.3.6.1.4.1.3902.3.315.1.1.3	INTEGER	read-only	The traffic engineering distribution protocol(s) used by this LSR. Note that an LSR may support more than one distribution protocol simultaneously.
INT zxr10MplsTunnelImplicitNullEnable	1.3.6.1.4.1.3902.3.315.1.1.4	INTEGER	read-only	If this object is true, then it enables the ImplicitNull.
INT zxr10MplsTunnelGrEnable	1.3.6.1.4.1.3902.3.315.1.1.5	INTEGER	read-only	If this object is true, then it enables the GR.
U32 zxr10MplsTunnelGrRefreshInterval	1.3.6.1.4.1.3902.3.315.1.1.6	Unsigned32	read-only	Graceful-restart interval time 10~30000.
U32 zxr10MplsTunnelGrRefreshMisses	1.3.6.1.4.1.3902.3.315.1.1.7	Unsigned32	read-only	Graceful-restart miss number 4~10.
U32 zxr10MplsTunnelGrRecoveryTime	1.3.6.1.4.1.3902.3.315.1.1.8	Unsigned32	read-only	Graceful-restart RecoveryTime 0~300000.
U32 zxr10MplsTunnelGrRestartTime	1.3.6.1.4.1.3902.3.315.1.1.9	Unsigned32	read-only	Graceful-restart time 0~300000.
U32 zxr10MplsTunnelSignallingRefreshInterval	1.3.6.1.4.1.3902.3.315.1.1.10	Unsigned32	read-only	RefreshInterval 5000~65535000
U32 zxr10MplsTunnelSignallingRefreshMisses	1.3.6.1.4.1.3902.3.315.1.1.11	Unsigned32	read-only	SignallingRefreshMisses 2~10
I32 zxr10MplsVersion	1.3.6.1.4.1.3902.3.315.1.1.12	Integer32	read-only	MPLS version number.
I32 zxr10MplsActiveLsps	1.3.6.1.4.1.3902.3.315.1.1.13	Integer32	read-only	Number of active LSPs.
U32 zxr10MplsAutobakTunnelMinID	1.3.6.1.4.1.3902.3.315.1.1.16	Unsigned32	read-only	The Min tunnelID can be used by Auto baktunnel.
U32 zxr10MplsAutobakTunnelMaxID	1.3.6.1.4.1.3902.3.315.1.1.17	Unsigned32	read-only	The Max tunnelID can be used by Auto baktunnel.
STR zxr10MplsRouterID	1.3.6.1.4.1.3902.3.315.1.1.18	DisplayString	read-only	TE_Routerid with interface name.
zxr10MplsTeTunnelObjects	1.3.6.1.4.1.3902.3.315.1.2
zxr10MplsTunnelTable	1.3.6.1.4.1.3902.3.315.1.2.1		not-accessible	The mplsTunnelTable allows new MPLS tunnels to be created between an LSR and a remote endpoint, and existing tunnels to be reconfigured or removed. Note that only point-to-point tunnel segments are supported, although multipoint-to-point and pointto- multipoint connections are supported by an LSR acting as a cross-connect. Each MPLS tunnel can thus have one out-segment originating at this LSR and/or one in-segment terminating at this LSR.
zxr10MplsTunnelEntry	1.3.6.1.4.1.3902.3.315.1.2.1.1		not-accessible	An entry in this table represents an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signalling protocol. Whenever a new entry is created with zxr10MplsTunnelIsIf set to true(1), then a corresponding entry is created in ifTable as well (see RFC 2863). The ifType of this entry is zxr10MplsTunnel(150). A tunnel entry needs to be uniquely identified across a MPLS network. Indices zxr10MplsTunnelIndex and zxr10MplsTunnelInstance uniquely identify a tunnel on the LSR originating the tunnel. To uniquely identify a tunnel across an MPLS network requires index zxr10MplsTunnelIngressLSRId. The last index zxr10MplsTunnelEgressLSRId is useful in identifying all instances of a tunnel that terminate on the same egress LSR.
U32 zxr10MplsTunnelIndex	1.3.6.1.4.1.3902.3.315.1.2.1.1.1	Unsigned32	read-only	Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading zxr10MplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the value signaled in the Tunnel Id of the Session object. When the MPLS signalling protocol is crldp(3) this value SHOULD be equal to the value signaled in the LSP ID.
U32 zxr10MplsTunnelInstance	1.3.6.1.4.1.3902.3.315.1.2.1.1.2	Unsigned32	read-only	Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is useful to identify multiple instances of tunnels for the purposes of backup and parallel tunnels. When the MPLS signaling protocol is rsvp(2) this value SHOULD be equal to the LSP Id of the Sender Template object. When the signaling protocol is crldp(3) there is no equivalent signaling object.
IP zxr10MplsTunnelIngressLSRId	1.3.6.1.4.1.3902.3.315.1.2.1.1.3	IpAddress	read-only	Identity of the ingress LSR associated with this tunnel instance. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the Tunnel Sender Address in the Sender Template object and MAY be equal to the Extended Tunnel Id field in the SESSION object. When the MPLS signalling protocol is rldp(3) this value SHOULD be equal to the Ingress LSR Router ID field in the LSPID TLV object.
IP zxr10MplsTunnelEgressLSRId	1.3.6.1.4.1.3902.3.315.1.2.1.1.4	IpAddress	read-only	Identity of the egress LSR associated with this tunnel instance.
U32 zxr10MplsTunnelOutLabel	1.3.6.1.4.1.3902.3.315.1.2.1.1.5	Unsigned32	read-only	Out label of local tunnel.
STR zxr10MplsTunnelOutIntf	1.3.6.1.4.1.3902.3.315.1.2.1.1.6	DisplayString	read-only	The name of out interface that local tunnel transits.
STR zxr10MplsTunnelName	1.3.6.1.4.1.3902.3.315.1.2.1.1.7	DisplayString	read-only	The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If zxr10MplsTunnelIsIf is set to true then the ifName of the interface corresponding to this tunnel should have a value equal to zxr10MplsTunnelName. Also see the description of ifName in RFC 2863.
STR zxr10MplsTunnelDescr	1.3.6.1.4.1.3902.3.315.1.2.1.1.8	DisplayString	read-only	A textual string containing information about the tunnel. If there is no description this object contains a zero length string. This object is may not be signaled by MPLS signaling protocols, consequentally the value of this object at transit and egress LSRs MAY be automatically generated or absent.
INT zxr10MplsTunnelIsIf	1.3.6.1.4.1.3902.3.315.1.2.1.1.9	INTEGER	read-only	Denotes whether or not this tunnel corresponds to an interface represented in the interfaces group table. Note that if this variable is set to true then the ifName of the interface corresponding to this tunnel should have a value equal to zxr10MplsTunnelName. Also see the description of ifName in RFC 2863. This object is meaningful only at the ingress and egress LSRs.
U32 zxr10MplsTunnelIfIndex	1.3.6.1.4.1.3902.3.315.1.2.1.1.10	Unsigned32	read-only	If zxr10MplsTunnelIsIf is set to true, then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfaces table. Otherwise this variable should contain the value of zero indicating that a valid ifIndex was not assigned to his tunnel interface.
INT zxr10MplsTunnelIfType	1.3.6.1.4.1.3902.3.315.1.2.1.1.11	INTEGER	read-only	Type of tunnel interface.
STR zxr10MplsTunnelIfAddrOrName	1.3.6.1.4.1.3902.3.315.1.2.1.1.12	DisplayString	read-only	Ip address or loopback name of tunnel interface.
STR zxr10MplsTunnelIfMaskOrIndex	1.3.6.1.4.1.3902.3.315.1.2.1.1.13	DisplayString	read-only	Subnet mask or loopback interface index of tunnel interface
INT zxr10MplsTunnelOwner	1.3.6.1.4.1.3902.3.315.1.2.1.1.14	INTEGER	read-only	Denotes the entity that created and is responsible for managing this tunnel. This column isau tomatically filled by the agent on creation of a ow.
INT zxr10MplsTunnelRole	1.3.6.1.4.1.3902.3.315.1.2.1.1.15	INTEGER	read-only	This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value MUST be set to transit(2) at transit points along the tunnel, if transit points are supported. This value MUST be set to tail(3) at the terminating point of the tunnel if tunnel tails are supported. The value headTail(4) is provided for tunnels that begin and end on the same LSR.
INT zxr10MplsTunnelSignallingProto	1.3.6.1.4.1.3902.3.315.1.2.1.1.16	INTEGER	read-only	The signalling protocol, if any, used to setup this tunnel.
I32 zxr10MplsTunnelSetupPrio	1.3.6.1.4.1.3902.3.315.1.2.1.1.17	Integer32	read-only	Indicates the setup priority of this tunnel.
I32 zxr10MplsTunnelHoldingPrio	1.3.6.1.4.1.3902.3.315.1.2.1.1.18	Integer32	read-only	Indicates the holding priority for this tunnel.
STR zxr10MplsTunnelSessionAttributes	1.3.6.1.4.1.3902.3.315.1.2.1.1.19	DisplayString	read-only	This bit mask indicates optional session values for this tunnel.
INT zxr10MplsTunnelFrrEnable	1.3.6.1.4.1.3902.3.315.1.2.1.1.20	INTEGER	read-only	If this tunnel enables FRR,this value is true,otherwise it is false.
U32 zxr10MplsTunnelResourcePointer	1.3.6.1.4.1.3902.3.315.1.2.1.1.21	Unsigned32	read-only	This variable represents a pointer to the traffic parameter specification for this tunnel. This value may point at an entry in the zxr10MplsTunnelResourceEntry to indicate which zxr10MplsTunnelResourceEntry is to be assigned to this LSP instance. This value may optionally point at an externally defined traffic parameter specification table. A value of zeroDotZero indicates best-effort treatment. By having the same value of this object, two or more LSPs can indicate resource sharing.
U32 zxr10MplsTunnelPrimaryInstance	1.3.6.1.4.1.3902.3.315.1.2.1.1.22	Unsigned32	read-only	Specifies the instance index of the primary instance of this tunnel. More details of the definition of tunnel instances and the primary tunnel instance can be found in the description of the TEXTUAL-CONVENTION MplsTunnelInstanceIndex.
U32 zxr10MplsTunnelInstancePriority	1.3.6.1.4.1.3902.3.315.1.2.1.1.23	Unsigned32	read-only	This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instances is defined as a set of LSPs with the same zxr10MplsTunnelIndex in this table, but with a different zxr10MplsTunnelInstance. Tunnel instance priorities are used to denote the priority at which a particular tunnel instance will supercede another. Instances of tunnels containing the same zxr10MplsTunnelInstancePriority will be used for load sharing.
U32 zxr10MplsTunnelHopTableIndex	1.3.6.1.4.1.3902.3.315.1.2.1.1.24	Unsigned32	read-only	Index into the zxr10MplsTunnelHopTable entry that specifies the explicit route hops for this tunnel. This object is meaningful only at the head-end of the tunnel.
U32 zxr10MplsTunnelPathInUse	1.3.6.1.4.1.3902.3.315.1.2.1.1.25	Unsigned32	read-only	This value denotes the configured path that was chosen for this tunnel. This value reflects the secondary index into zxr10MplsTunnelHopTable. This path may not exactly match the one in zxr10MplsTunnelARHopTable due to the fact that some CSPF modification may have taken place. See zxr10MplsTunnelARHopTable for the actual path being taken by the tunnel. A value of zero denotes that no path is currently in use or available.
U32 zxr10MplsTunnelARHopTableIndex	1.3.6.1.4.1.3902.3.315.1.2.1.1.26	Unsigned32	read-only	Index into the zxr10MplsTunnelARHopTable entry that specifies the actual hops traversed by the tunnel. This is automatically updated by the agent when the actual hops becomes available.
U32 zxr10MplsTunnelCHopTableIndex	1.3.6.1.4.1.3902.3.315.1.2.1.1.27	Unsigned32	read-only	Index into the zxr10MplsTunnelCHopTable entry that specifies the computed hops traversed by the tunnel. This is automatically updated by the agent when computed hops become available or when computed hops get modified.
TIK zxr10MplsTunnelTotalUpTime	1.3.6.1.4.1.3902.3.315.1.2.1.1.28	TimeTicks	read-only	This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST return a value of 0.
TIK zxr10MplsTunnelInstanceUpTime	1.3.6.1.4.1.3902.3.315.1.2.1.1.29	TimeTicks	read-only	This value identifies the total time that this tunnel instance's operStatus has been Up(1).
TIK zxr10MplsTunnelPrimaryUpTime	1.3.6.1.4.1.3902.3.315.1.2.1.1.30	TimeTicks	read-only	Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in zxr10MplsTunnelPrimaryInstance.
C32 zxr10MplsTunnelPathChanges	1.3.6.1.4.1.3902.3.315.1.2.1.1.31	Counter32	read-only	Specifies the number of times the actual path for this tunnel instance has changed.
TIK zxr10MplsTunnelLastPathChange	1.3.6.1.4.1.3902.3.315.1.2.1.1.32	TimeTicks	read-only	Specifies the time since the last change to the actual path for this tunnel instance.
TIM zxr10MplsTunnelCreationTime	1.3.6.1.4.1.3902.3.315.1.2.1.1.33	TimeStamp	read-only	Specifies the value of SysUpTime when the first instance of this tunnel came into existence. That is, when the value of zxr10MplsTunnelOperStatus was first set to up(1).
C32 zxr10MplsTunnelStateTransitions	1.3.6.1.4.1.3902.3.315.1.2.1.1.34	Counter32	read-only	Specifies the number of times the state (zxr10MplsTunnelOperStatus) of this tunnel instance has changed.
INT zxr10MplsTunnelAdminStatus	1.3.6.1.4.1.3902.3.315.1.2.1.1.35	INTEGER	read-only	Indicates the desired operational status of this tunnel.
INT zxr10MplsTunnelOperStatus	1.3.6.1.4.1.3902.3.315.1.2.1.1.36	INTEGER	read-only	Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel.
ROW zxr10MplsTunnelRowStatus	1.3.6.1.4.1.3902.3.315.1.2.1.1.37	RowStatus	read-only	This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except zxr10MplsTunnelAdminStatus, zxr10MplsTunnelRowStatus and zxr10MplsTunnelStorageType.
STO zxr10MplsTunnelStorageType	1.3.6.1.4.1.3902.3.315.1.2.1.1.38	StorageType	read-only	The storage type for this tunnel entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
INT zxr10MplsTunnelAutorouteEnable	1.3.6.1.4.1.3902.3.315.1.2.1.1.39	INTEGER	read-only	If this object is true, then it enables the Autoroute.
INT zxr10MplsTunnelAutorouteMetricType	1.3.6.1.4.1.3902.3.315.1.2.1.1.40	INTEGER	read-only	Indicates the autoroute metric type over this tunnel.
I32 zxr10MplsTunnelAutorouteMetricRelativeValue	1.3.6.1.4.1.3902.3.315.1.2.1.1.41	Integer32	read-only	Indicates the value that adjust metric for autoroutes relative to IGP.
U32 zxr10MplsTunnelAutorouteMetricAbsoluteValue	1.3.6.1.4.1.3902.3.315.1.2.1.1.42	Unsigned32	read-only	Indicates the value for all autoroutes over tunnel.
INT zxr10MplsTunnelRecordRouteEnable	1.3.6.1.4.1.3902.3.315.1.2.1.1.43	INTEGER	read-only	If this object is true, then it enables the RecordRoute
INT zxr10MplsTunnelCACStatus	1.3.6.1.4.1.3902.3.315.1.2.1.1.44	INTEGER	read-only	CAC switch status
C64 zxr10MplsTunnelLspOctets	1.3.6.1.4.1.3902.3.315.1.2.1.1.45	Counter64	read-only	The number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
C64 zxr10MplsTunnelLspPackets	1.3.6.1.4.1.3902.3.315.1.2.1.1.46	Counter64	read-only	The number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
TIM zxr10MplsTunnelLspLastTransition	1.3.6.1.4.1.3902.3.315.1.2.1.1.47	TimeStamp	read-only	The time in 10-millisecond units since the last transition occurred on this LSP.
I32 zxr10MplsTunnelLspConfiguredPaths	1.3.6.1.4.1.3902.3.315.1.2.1.1.48	Integer32	read-only	The number of paths configured for this LSP.
INT zxr10MplsTunnelPathType	1.3.6.1.4.1.3902.3.315.1.2.1.1.49	INTEGER	read-only	The type of path that is active, i.e., a primary path, a standby path, or a generic secondary path. This field is meaningless unless mplsPathName is not empty
OCT zxr10MplsTunnelPathExplicitRoute	1.3.6.1.4.1.3902.3.315.1.2.1.1.50	OCTET STRING	read-only	The explicit route used to set up this LSP. This may either be the route configured by the user, or a route automatically computed to satisfy constraints set by the user. This field is a displayable string in the format of XXX.XXX.XXX.XXX S/L repeated for each explicit address. The S/L character stands for Strict/Loose route. This field is meaningless unless mplsPathName is not empty
OCT zxr10MplsTunnelPathRecordRoute	1.3.6.1.4.1.3902.3.315.1.2.1.1.51	OCTET STRING	read-only	The route actually used for this path, as recorded by the signaling protocol. This field is a displayable string in the format of XXX.XXX.XXX.XXX repeated for each address. This field is meaningless unless mplsPathName is not empty
INT zxr10MplsTunnelPathCOS	1.3.6.1.4.1.3902.3.315.1.2.1.1.52	INTEGER	read-only	The configured Class Of Service on this path. If the value is between 0 and 7 inclusive, this value will be inserted in the 3 bit COS field in the label. If the value is 255, the value in the COS field of the label will depend on other factors. This field is meaningless unless mplsPathName is not empty
I32 zxr10MplsTunnelPathInclude	1.3.6.1.4.1.3902.3.315.1.2.1.1.53	Integer32	read-only	This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have colors associated with it, and the intersection of the link's colors and the 'include' set MUST be non-null. This field is meaningless unless mplsPathName is not empty
I32 zxr10MplsTunnelPathExclude	1.3.6.1.4.1.3902.3.315.1.2.1.1.54	Integer32	read-only	This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have colors associated with it, and the intersection of the link's colors and the 'exclude' set MUST be null. This field is meaningless unless mplsPathName is not empty
INT zxr10MplsTunnelHotStandbyEnable	1.3.6.1.4.1.3902.3.315.1.2.1.1.55	INTEGER	read-only	If this object is true, then it enables hotstandby.
U32 zxr10MplsTunnelHotStandbyPrimaryPathOption	1.3.6.1.4.1.3902.3.315.1.2.1.1.56	Unsigned32	read-only	Specifies the pathOption of protected LSP.
U32 zxr10MplsTunnelHotStandbySecondaryPathOption	1.3.6.1.4.1.3902.3.315.1.2.1.1.57	Unsigned32	read-only	Specifies the pathOption of hotstandby LSP.
I32 zxr10MplsTunnelHotStandbyInstance	1.3.6.1.4.1.3902.3.315.1.2.1.1.58	Integer32	read-only	Uniquely identifies the tunnel instance of hotstandby lsp.
INT zxr10MplsTunnelHotStandbyState	1.3.6.1.4.1.3902.3.315.1.2.1.1.59	INTEGER	read-only	Specifies the hotstandby state of the tunnel.
INT zxr10MplsTunnelBfdEnable	1.3.6.1.4.1.3902.3.315.1.2.1.1.60	INTEGER	read-only	If this object is true, then it enables bfd on the tunnel.
U32 zxr10MplsTunnelBFDmult	1.3.6.1.4.1.3902.3.315.1.2.1.1.61	Unsigned32	read-only	The detecting multiple of receive/send CONTROL message.
U32 zxr10MplsTunnelBFDminTxInterval	1.3.6.1.4.1.3902.3.315.1.2.1.1.62	Unsigned32	read-only	The minimal time to send CONTROL message.
U32 zxr10MplsTunnelBFDminRxInterval	1.3.6.1.4.1.3902.3.315.1.2.1.1.63	Unsigned32	read-only	The minimal time to receive CONTROL message.
INT zxr10MplsTunnelBFDstatus	1.3.6.1.4.1.3902.3.315.1.2.1.1.64	INTEGER	read-only	The status of bfd.
INT zxr10MplsTunnelFrrProtectionMethod	1.3.6.1.4.1.3902.3.315.1.2.1.1.65	INTEGER	read-only	Indicates which protection method is used for fast reroute on this device. unknown(0) indicates no FRR protection exists. facilityBackup(1) indicates bypass protection exists. oneToOneBackup(2) indicates detour protection exists.
U32 zxr10MplsTunnelBandwidth	1.3.6.1.4.1.3902.3.315.1.2.1.1.66	Unsigned32	read-only	Specifies the bandwidth of the tunnel.
U32 zxr10MplsTunnelSubPoolBandwidth	1.3.6.1.4.1.3902.3.315.1.2.1.1.67	Unsigned32	read-only	Specifies the sub pool bandwidth of the tunnel.
U32 zxr10MplsTunnelIgpMetric	1.3.6.1.4.1.3902.3.315.1.2.1.1.68	Unsigned32	read-only	The value of igp metric is used for build tunnel.
U32 zxr10MplsTunnelTeMetric	1.3.6.1.4.1.3902.3.315.1.2.1.1.69	Unsigned32	read-only	The value of te metric is used for build tunnel.
INT zxr10MplsTunnelBFDSlaveStatus	1.3.6.1.4.1.3902.3.315.1.2.1.1.70	INTEGER	read-only	The status of slave lsp bfd.
INT zxr10MplsTunnelAssociateStatus	1.3.6.1.4.1.3902.3.315.1.2.1.1.71	INTEGER	read-only	The associate bidirect status of this tunnel.
zxr10MplsTeRemoteTunnelObjects	1.3.6.1.4.1.3902.3.315.1.3
zxr10MplsRemoteTunnelTable	1.3.6.1.4.1.3902.3.315.1.3.1		not-accessible	The Mpls Remote Tunnel Table
zxr10MplsRemoteTunnelEntry	1.3.6.1.4.1.3902.3.315.1.3.1.1		not-accessible	An entry in this table represents an MPLS remote tunnel.
U32 zxr10MplsRemoteTunnelIndex	1.3.6.1.4.1.3902.3.315.1.3.1.1.1	Unsigned32	read-only	Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs.
U32 zxr10MplsRemoteTunnelInstance	1.3.6.1.4.1.3902.3.315.1.3.1.1.2	Unsigned32	read-only	Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is useful to identify multiple instances of tunnels for the purposes of backup and parallel tunnels.
IP zxr10MplsRemoteTunnelIngressLSRId	1.3.6.1.4.1.3902.3.315.1.3.1.1.3	IpAddress	read-only	Identity of the ingress LSR associated with this tunnel instance.
IP zxr10MplsRemoteTunnelEgressLSRId	1.3.6.1.4.1.3902.3.315.1.3.1.1.4	IpAddress	read-only	Identity of the egress LSR associated with this tunnel instance.
U32 zxr10MplsRemoteTunnelInLabel	1.3.6.1.4.1.3902.3.315.1.3.1.1.5	Unsigned32	read-only	In label of Remote tunnel.
U32 zxr10MplsRemoteTunnelOutLabel	1.3.6.1.4.1.3902.3.315.1.3.1.1.6	Unsigned32	read-only	Out label of Remote tunnel.
STR zxr10MplsRemoteTunnelInIntf	1.3.6.1.4.1.3902.3.315.1.3.1.1.7	DisplayString	read-only	The name of in interface that remote tunnel transits.
STR zxr10MplsRemoteTunnelOutIntf	1.3.6.1.4.1.3902.3.315.1.3.1.1.8	DisplayString	read-only	The name of out interface that remote tunnel transits.
STR zxr10MplsRemoteTunnelName	1.3.6.1.4.1.3902.3.315.1.3.1.1.9	DisplayString	read-only	The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If zxr10MplsRemoteTunnelIsIf is set to true then the ifName of the interface corresponding to this tunnel should have a value equal to zxr10MplsRemoteTunnelName. Also see the description of ifName in RFC 2863.
INT zxr10MplsRemoteTunnelIsIf	1.3.6.1.4.1.3902.3.315.1.3.1.1.11	INTEGER	read-only	Denotes whether or not this tunnel corresponds to an interface represented in the interfaces group table. Note that if this variable is set to true then the ifName of the interface corresponding to this tunnel should have a value equal to zxr10MplsRemoteTunnelName. Also see the description of ifName in RFC 2863. This object is meaningful only at the ingress and egress LSRs.
INT zxr10MplsRemoteTunnelOwner	1.3.6.1.4.1.3902.3.315.1.3.1.1.12	INTEGER	read-only	Denotes the entity that created and is responsible for managing this tunnel. This column isau tomatically filled by the agent on creation of a ow.
INT zxr10MplsRemoteTunnelRole	1.3.6.1.4.1.3902.3.315.1.3.1.1.13	INTEGER	read-only	This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value MUST be set to transit(2) at transit points along the tunnel, if transit points are supported. This value MUST be set to tail(3) at the terminating point of the tunnel if tunnel tails are supported. The value headTail(4) is provided for tunnels that begin and end on the same LSR.
INT zxr10MplsRemoteTunnelSignallingProto	1.3.6.1.4.1.3902.3.315.1.3.1.1.14	INTEGER	read-only	The signalling protocol, if any, used to setup this tunnel.
I32 zxr10MplsRemoteTunnelSetupPrio	1.3.6.1.4.1.3902.3.315.1.3.1.1.15	Integer32	read-only	Indicates the setup priority of this tunnel.
I32 zxr10MplsRemoteTunnelHoldingPrio	1.3.6.1.4.1.3902.3.315.1.3.1.1.16	Integer32	read-only	Indicates the holding priority for this tunnel.
STR zxr10MplsRemoteTunnelSessionAttributes	1.3.6.1.4.1.3902.3.315.1.3.1.1.17	DisplayString	read-only	This bit mask indicates optional session values for this tunnel.
INT zxr10MplsRemoteTunnelLocalProtectInUse	1.3.6.1.4.1.3902.3.315.1.3.1.1.18	INTEGER	read-only	Indicates that the local repair mechanism is in use to maintain this tunnel (usually in the face of an outage of the link it was previously routed over).
U32 zxr10MplsRemoteTunnelPrimaryInstance	1.3.6.1.4.1.3902.3.315.1.3.1.1.19	Unsigned32	read-only	Specifies the instance index of the primary instance of this tunnel. More details of the definition of tunnel instances and the primary tunnel instance can be found in the description of the TEXTUAL-CONVENTION MplsTunnelInstanceIndex.
U32 zxr10MplsRemoteTunnelInstancePriority	1.3.6.1.4.1.3902.3.315.1.3.1.1.20	Unsigned32	read-only	This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instances is defined as a set of LSPs with the same zxr10MplsRemoteTunnelIndex in this table, but with a different zxr10MplsRemoteTunnelInstance. Tunnel instance priorities are used to denote the priority at which a particular tunnel instance will supercede another. Instances of tunnels containing the same zxr10MplsRemoteTunnelInstancePriority will be used for load sharing.
TIK zxr10MplsRemoteTunnelTotalUpTime	1.3.6.1.4.1.3902.3.315.1.3.1.1.21	TimeTicks	read-only	This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST return a value of 0.
TIK zxr10MplsRemoteTunnelInstanceUpTime	1.3.6.1.4.1.3902.3.315.1.3.1.1.22	TimeTicks	read-only	This value identifies the total time that this tunnel instance's operStatus has been Up(1).
TIK zxr10MplsRemoteTunnelPrimaryUpTime	1.3.6.1.4.1.3902.3.315.1.3.1.1.23	TimeTicks	read-only	Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in zxr10MplsRemoteTunnelPrimaryInstance.
TIM zxr10MplsRemoteTunnelCreationTime	1.3.6.1.4.1.3902.3.315.1.3.1.1.26	TimeStamp	read-only	Specifies the value of SysUpTime when the first instance of this tunnel came into existence. That is, when the value of zxr10MplsRemoteTunnelOperStatus was first set to up(1).
INT zxr10MplsRemoteTunnelAdminStatus	1.3.6.1.4.1.3902.3.315.1.3.1.1.28	INTEGER	read-only	Indicates the desired operational status of this tunnel.
INT zxr10MplsRemoteTunnelOperStatus	1.3.6.1.4.1.3902.3.315.1.3.1.1.29	INTEGER	read-only	Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel.
ROW zxr10MplsRemoteTunnelRowStatus	1.3.6.1.4.1.3902.3.315.1.3.1.1.30	RowStatus	read-only	This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except zxr10MplsRemoteTunnelAdminStatus, zxr10MplsRemoteTunnelRowStatus and zxr10MplsRemoteTunnelStorageType.
STO zxr10MplsRemoteTunnelStorageType	1.3.6.1.4.1.3902.3.315.1.3.1.1.31	StorageType	read-only	The storage type for this tunnel entry. Conceptual rows having the value 'permanen' need not allow write-access to any columnar objects in the row.
OCT zxr10MplsRemoteTunnelPathExplicitRoute	1.3.6.1.4.1.3902.3.315.1.3.1.1.32	OCTET STRING	read-only	The explicit route used to set up this LSP. This may either be the route configured by the user, or a route automatically computed to satisfy constraints set by the user. This field is a displayable string in the format of XXX.XXX.XXX.XXX S/L repeated for each explicit address. The S/L character stands for Strict/Loose route. This field is meaningless unless mplsPathName is not empty
OCT zxr10MplsRemoteTunnelPathRecordRoute	1.3.6.1.4.1.3902.3.315.1.3.1.1.33	OCTET STRING	read-only	The route actually used for this path, as recorded by the signaling protocol. This field is a displayable string in the format of XXX.XXX.XXX.XXX repeated for each address. This field is meaningless unless mplsPathName is not empty
INT zxr10MplsRemoteTunnelFrrProtectionMethod	1.3.6.1.4.1.3902.3.315.1.3.1.1.34	INTEGER	read-only	Indicates which protection method is used for fast reroute on this device. unknown(0) indicates no FRR protection exists. facilityBackup(1) indicates bypass protection exists. oneToOneBackup(2) indicates detour protection exists.
U32 zxr10MplsRemoteTunnelARHopTableIndex	1.3.6.1.4.1.3902.3.315.1.3.1.1.35	Unsigned32	read-only	Index into the zxr10MplsTunnelARHopTable entry that specifies the actual hops traversed by the remote tunnel. This is automatically updated by the agent when the actual hops becomes available.
C64 zxr10MplsRemoteTunnelLspInOctets	1.3.6.1.4.1.3902.3.315.1.3.1.1.36	Counter64	read-only	The number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
C64 zxr10MplsRemoteTunnelLspInPackets	1.3.6.1.4.1.3902.3.315.1.3.1.1.37	Counter64	read-only	The number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
zxr10MplsTeHopObjects	1.3.6.1.4.1.3902.3.315.1.4
zxr10MplsTunnelHopTable	1.3.6.1.4.1.3902.3.315.1.4.1		not-accessible	The zxr10MplsTunnelHopTable is used to indicate the hops, strict or loose, for an instance of an MPLS tunnel defined in zxr10MplsTunnelTable, when it is established via signalling, for the outgoing direction of the tunnel.
zxr10MplsTunnelHopEntry	1.3.6.1.4.1.3902.3.315.1.4.1.1		not-accessible	An entry in this table represents a tunnel hop. An entry is created by a network administrator for signaled ERLSP set up by an MPLS signalling protocol.
U32 zxr10MplsTunnelHopListIndex	1.3.6.1.4.1.3902.3.315.1.4.1.1.1	Unsigned32	read-only	Primary index into this table identifying a particular explicit route object.
U32 zxr10MplsTunnelHopPathOptionIndex	1.3.6.1.4.1.3902.3.315.1.4.1.1.2	Unsigned32	read-only	Secondary index into this table identifying a particular group of hops representing a particular configured path. This is otherwise known as a path option.
U32 zxr10MplsTunnelHopIndex	1.3.6.1.4.1.3902.3.315.1.4.1.1.3	Unsigned32	read-only	Tertiary index into this table identifying a particular hop.
INT zxr10MplsTunnelHopAddrType	1.3.6.1.4.1.3902.3.315.1.4.1.1.4	INTEGER	read-only	The Hop Address Type of this tunnel hop.
IP zxr10MplsTunnelHopIpAddr	1.3.6.1.4.1.3902.3.315.1.4.1.1.5	IpAddress	read-only	The Tunnel Hop Address for this tunnel hop.
U32 zxr10MplsTunnelHopIpPrefixLen	1.3.6.1.4.1.3902.3.315.1.4.1.1.6	Unsigned32	read-only	If zxr10MplsTunnelHopAddrType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP address in object zxr10MplsTunnelHopIpAddr. Otherwise this value is irrelevant and should be ignored.
U32 zxr10MplsTunnelHopAsNumber	1.3.6.1.4.1.3902.3.315.1.4.1.1.7	Unsigned32	read-only	If zxr10MplsTunnelHopAddrType is set to asnumber(3), then this value will contain the AS number of this hop. Otherwise the agent should set this object to zerolength string and the manager should ignore this.
U32 zxr10MplsTunnelHopAddrUnnum	1.3.6.1.4.1.3902.3.315.1.4.1.1.8	Unsigned32	read-only	If zxr10MplsTunnelHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object should be used in conjunction with zxr10MplsTunnelHopIpAddress which would contain the LSR Router ID in this case. Otherwise the agent should set this object to zero-length string and the manager should ignore this.
U32 zxr10MplsTunnelHopLspId	1.3.6.1.4.1.3902.3.315.1.4.1.1.9	Unsigned32	read-only	If zxr10MplsTunnelHopAddrType is set to lspid(5), then this value will contain the LSPID of a tunnel of this hop. The present tunnel being configured is tunneled through this hop (using label stacking). This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
INT zxr10MplsTunnelHopType	1.3.6.1.4.1.3902.3.315.1.4.1.1.10	INTEGER	read-only	Denotes whether this tunnel hop is routed in a strict or loose fashion. The value of this object has no meaning if the zxr10MplsTunnelHopInclude object is set to 'false'.
INT zxr10MplsTunnelHopInclude	1.3.6.1.4.1.3902.3.315.1.4.1.1.11	INTEGER	read-only	If this value is set to true, then this indicates that this hop must be included in the tunnel's path. If this value is set to 'false', then this hoph must be avoided when calculating the path for this tunnel. The default value of this object is 'true', so that by default all indicated hops are included in the CSPF path computation. If this object is set to 'false' the value of zxr10MplsTunnelHopType should be ignored.
STR zxr10MplsTunnelHopPathOptionName	1.3.6.1.4.1.3902.3.315.1.4.1.1.12	DisplayString	read-only	The description of this series of hops as they relate to the specified path option. The value of this object SHOULD be the same for each hop in the series that comprises a path option.
INT zxr10MplsTunnelHopEntryPathComp	1.3.6.1.4.1.3902.3.315.1.4.1.1.13	INTEGER	read-only	If this value is set to dynamic, then the user should only specify the source and destination of the path and expect that the CSPF will calculate the remainder of the path. If this value is set to explicit, the user should specify the entire path for the tunnel to take. This path may contain strict or loose hops. Each hop along a specific path SHOULD have this object set to the same value.
ROW zxr10MplsTunnelHopRowStatus	1.3.6.1.4.1.3902.3.315.1.4.1.1.14	RowStatus	read-only	This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except zxr10MplsTunnelHopRowStatus and zxr10MplsTunnelHopStorageType.
STO zxr10MplsTunnelHopStorageType	1.3.6.1.4.1.3902.3.315.1.4.1.1.15	StorageType	read-only	The storage type for this Hop entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
zxr10MplsTeResourceObjects	1.3.6.1.4.1.3902.3.315.1.5
zxr10MplsTunnelResourceTable	1.3.6.1.4.1.3902.3.315.1.5.1		not-accessible	The zxr10MplsTunnelResourceTable allows a manager to specify which resources are desired for an MPLS tunnel. This table also allows several tunnels to point to a single entry in this table, implying that these tunnels should share resources.
zxr10MplsTunnelResourceEntry	1.3.6.1.4.1.3902.3.315.1.5.1.1		not-accessible	An entry in this table represents a set of resources for an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by any MPLS signalling protocol. An entry in this table referenced by a tunnel instance with zero zxr10MplsTunnelInstance value indicates a configured set of resource parameter. An entry referenced by a tunnel instance with a non-zero zxr10MplsTunnelInstance reflects the in-use resource parameters for the tunnel instance which may have been negotiated or modified by the MPLS signaling protocols.
U32 zxr10MplsTunnelResourceIndex	1.3.6.1.4.1.3902.3.315.1.5.1.1.1	Unsigned32	read-only	Uniquely identifies this row.
U32 zxr10MplsTunnelResourceMaxRate	1.3.6.1.4.1.3902.3.315.1.5.1.1.2	Unsigned32	read-only	The maximum rate in bits/second. Note that setting zxr10MplsTunnelResourceMaxRate, zxr10MplsTunnelResourceMeanRate, and zxr10MplsTunnelResourceMaxBurstSize to 0 indicates besteffort treatment.
U32 zxr10MplsTunnelResourceMeanRate	1.3.6.1.4.1.3902.3.315.1.5.1.1.3	Unsigned32	read-only	This object is copied into an instance of mplsTrafficParamMeanRate in the mplsTrafficParamTable. The OID of this table entry is then copied into the corresponding mplsInSegmentTrafficParamPtr.
U32 zxr10MplsTunnelResourceMaxBurstSize	1.3.6.1.4.1.3902.3.315.1.5.1.1.4	Unsigned32	read-only	The maximum burst size in bytes.
U32 zxr10MplsTunnelResourceMeanBurstSize	1.3.6.1.4.1.3902.3.315.1.5.1.1.5	Unsigned32	read-only	The mean burst size in bytes. The implementations which do not implement this variable must return noSuchObject exception for this object and must not allow a user to set this object.
ROW zxr10MplsTunnelResourceRowStatus	1.3.6.1.4.1.3902.3.315.1.5.1.1.6	RowStatus	read-only	This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except zxr10MplsTunnelResourceRowStatus and zxr10MplsTunnelResourceStorageType.
STO zxr10MplsTunnelResourceStorageType	1.3.6.1.4.1.3902.3.315.1.5.1.1.7	StorageType	read-only	The storage type for this Hop entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects Srinivasan, et al. Standards Track [Page 38] RFC 3812 MPLS-TE-STD-MIB June 2004 in the row.
zxr10MplsTeCHopObjects	1.3.6.1.4.1.3902.3.315.1.6
zxr10MplsTunnelCHopTable	1.3.6.1.4.1.3902.3.315.1.6.1		not-accessible	The zxr10MplsTunnelCHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in zxr10MplsTunnelTable, as computed by a constraintbased routing protocol, based on the zxr10MplsTunnelHopTable for the outgoing direction of the tunnel. Thus at a transit LSR, this table (if the table is supported) MAY contain the path computed by the CSPF engine on (or on behalf of) this LSR. Each row in this table is indexed by zxr10MplsTunnelCHopListIndex. Each row also has a secondary index zxr10MplsTunnelCHopIndex, corresponding to the next hop that this row corresponds to. In case we want to specify a particular interface on the originating LSR of an outgoing tunnel by which we want packets to exit the LSR, we specify this as the first hop for this tunnel in zxr10MplsTunnelCHopTable. lease note that since the information necessary to build entries within this table may not be supported by some LSRs, implementation of this table is optional. Furthermore, since the information in this table describes the path computed by the CSPF engine the entries in this table are read-only.
zxr10MplsTunnelCHopEntry	1.3.6.1.4.1.3902.3.315.1.6.1.1		not-accessible	An entry in this table represents a tunnel hop. An entry in this table is created by a path computation engine using CSPF techniques applied to he information collected by routing protocols and the hops specified in the corresponding zxr10MplsTunnelHopTable.
U32 zxr10MplsTunnelCHopListIndex	1.3.6.1.4.1.3902.3.315.1.6.1.1.1	Unsigned32	read-only	Primary index into this table identifying a particular computed hop list.
U32 zxr10MplsTunnelCHopIndex	1.3.6.1.4.1.3902.3.315.1.6.1.1.2	Unsigned32	read-only	Secondary index into this table identifying the particular hop.
INT zxr10MplsTunnelCHopAddrType	1.3.6.1.4.1.3902.3.315.1.6.1.1.3	INTEGER	read-only	The Hop Address Type of this tunnel hop. Note that lspid(5) is a valid option only for tunnels signaled via CRLDP.
IP zxr10MplsTunnelCHopIpAddr	1.3.6.1.4.1.3902.3.315.1.6.1.1.4	IpAddress	read-only	The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding zxr10MplsTunnelCHopAddrType. If zxr10MplsTunnelCHopAddrType is set to unnum(4), then this value will contain the LSR Router ID of the unnumbered interface. Otherwise the agent should set this object to the zero-length string and the manager SHOULD ignore this object.
U32 zxr10MplsTunnelCHopIpPrefixLen	1.3.6.1.4.1.3902.3.315.1.6.1.1.5	Unsigned32	read-only	If zxr10MplsTunnelCHopAddrType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP address in object zxr10MplsTunnelCHopIpAddr. Otherwise this value is irrelevant and should be ignored.
U32 zxr10MplsTunnelCHopAsNumber	1.3.6.1.4.1.3902.3.315.1.6.1.1.6	Unsigned32	read-only	If zxr10MplsTunnelCHopAddrType is set to asnumber(3), then this value will contain the AS number of this hop. Otherwise the agent should set this object to zero-length string and the manager should ignore this.
U32 zxr10MplsTunnelCHopAddrUnnum	1.3.6.1.4.1.3902.3.315.1.6.1.1.7	Unsigned32	read-only	If zxr10MplsTunnelCHopAddrType is set to unnum(4), then this value will contain the unnumbered interface identifier of this hop. This object should be used in conjunction with zxr10MplsTunnelCHopIpAddr which would contain the LSR Router ID in this case. Otherwise the agent should set this object to zerolength string and the manager should ignore this.
U32 zxr10MplsTunnelCHopLspId	1.3.6.1.4.1.3902.3.315.1.6.1.1.8	Unsigned32	read-only	If zxr10MplsTunnelCHopAddrType is set to lspid(5), then his value will contain the LSP ID of this hop. his object is otherwise insignificant and should contain a value of 0 to indicate this fact.
INT zxr10MplsTunnelCHopType	1.3.6.1.4.1.3902.3.315.1.6.1.1.9	INTEGER	read-only	Denotes whether this is tunnel hop is routed in a strict or loose fashion.
zxr10MplsTeARHopObjects	1.3.6.1.4.1.3902.3.315.1.7
zxr10MplsTunnelARHopTable	1.3.6.1.4.1.3902.3.315.1.7.1		not-accessible	The zxr10MplsTunnelARHopTable is used to indicate the hops for an MPLS tunnel defined in zxr10MplsTunnelTable, as reported by the MPLS signalling protocol. Thus at a transit LSR, this table (if the table is supported and if the signaling protocol is recording actual route information) contains the actual route of the whole tunnel. If the signaling protocol is not recording the actual route, this table MAY report the information from the zxr10MplsTunnelHopTable or the zxr10MplsTunnelCHopTable. Each row in this table is indexed by zxr10MplsTunnelARHopListIndex. Each row also has a secondary index zxr10MplsTunnelARHopIndex, corresponding to the next hop that this row corresponds to. Please note that since the information necessary to build entries within this table is not provided by some MPLS signalling protocols, implementation of this table is optional. Furthermore, since the information in this table is actually provided by the MPLS signalling protocol after the path has been set-up, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as readonly. Note also that the contents of this table may change while it is being read because of re-routing activities. A network administrator may verify that the actual route read is consistent by reference to the zxr10MplsTunnelLastPathChange object.
zxr10MplsTunnelARHopEntry	1.3.6.1.4.1.3902.3.315.1.7.1.1		not-accessible	An entry in this table represents a tunnel hop. An entry is created by the agent for signaled ERLSP set up by an MPLS signalling protocol.
U32 zxr10MplsTunnelARHopListIndex	1.3.6.1.4.1.3902.3.315.1.7.1.1.1	Unsigned32	read-only	Primary index into this table identifying a particular recorded hop list.
U32 zxr10MplsTunnelARHopIndex	1.3.6.1.4.1.3902.3.315.1.7.1.1.2	Unsigned32	read-only	Secondary index into this table identifying the particular hop.
INT zxr10MplsTunnelARHopAddrType	1.3.6.1.4.1.3902.3.315.1.7.1.1.3	INTEGER	read-only	The Hop Address Type of this tunnel hop. ote that lspid(5) is a valid option only for tunnels signaled via CRLDP.
IP zxr10MplsTunnelARHopIpAddr	1.3.6.1.4.1.3902.3.315.1.7.1.1.4	IpAddress	read-only	The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding zxr10MplsTunnelARHopAddrType. If zxr10MplsTunnelARHopAddrType is set to unnum(4), then this value contains the LSR Router ID of the unnumbered interface. Otherwise the agent SHOULD set this object to the zero-length string and the manager should ignore this object.
U32 zxr10MplsTunnelARHopAddrUnnum	1.3.6.1.4.1.3902.3.315.1.7.1.1.5	Unsigned32	read-only	If zxr10MplsTunnelARHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object should be used in conjunction with zxr10MplsTunnelARHopIpAddr which would contain the LSR Router ID in this case. Otherwise the agent should set this object to zero-length string and the manager should ignore this.
U32 zxr10MplsTunnelARHopLspId	1.3.6.1.4.1.3902.3.315.1.7.1.1.6	Unsigned32	read-only	If zxr10MplsTunnelARHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
zxr10MplsTeInterfaceObjects	1.3.6.1.4.1.3902.3.315.1.8
zxr10MplsInterfaceTable	1.3.6.1.4.1.3902.3.315.1.8.1		not-accessible	A list of mpls traffic-eng interface entries.
zxr10MplsInterfaceEntry	1.3.6.1.4.1.3902.3.315.1.8.1.1		not-accessible	An entry containing mpls traffic-eng interface.
U32 zxr10MplsInterfaceIndex	1.3.6.1.4.1.3902.3.315.1.8.1.1.1	Unsigned32	read-only	A unique value, greater than zero, for each interface whitch enables mpls traffic-eng.
STR zxr10MplsInterfaceName	1.3.6.1.4.1.3902.3.315.1.8.1.1.2	DisplayString	read-only	The name of this interface.
IP zxr10MplsInterfaceIpAddr	1.3.6.1.4.1.3902.3.315.1.8.1.1.3	IpAddress	read-only	The ip address of this interface.
IP zxr10MplsInterfaceMask	1.3.6.1.4.1.3902.3.315.1.8.1.1.4	IpAddress	read-only	The subnet mask of this interface.
INT zxr10MplsInterfaceBfdEnable	1.3.6.1.4.1.3902.3.315.1.8.1.1.5	INTEGER	read-only	If this interface enables bfd,this value is true,otherwise it is false.
INT zxr10MplsInterfaceAuthEnable	1.3.6.1.4.1.3902.3.315.1.8.1.1.6	INTEGER	read-only	If this interface enables RSVP cryptographic authentication, this value is true,otherwise it is false.
INT zxr10MplsInterfaceAuthChallengeEnable	1.3.6.1.4.1.3902.3.315.1.8.1.1.7	INTEGER	read-only	If this interface as a receiver enables rsvp authentication challenge,this value is true,otherwise it is false.
INT zxr10MplsInterfaceAuthChallengeImpEnable	1.3.6.1.4.1.3902.3.315.1.8.1.1.8	INTEGER	read-only	If this interface as a sender enables rsvp authentication challenge,this value is true,otherwise it is false.
U32 zxr10MplsInterfaceAuthLifeTime	1.3.6.1.4.1.3902.3.315.1.8.1.1.9	Unsigned32	read-only	Specifies maximum lifetime of neighbor authentication state on this interface
STR zxr10MplsInterfaceAuthKey	1.3.6.1.4.1.3902.3.315.1.8.1.1.10	DisplayString	read-only	Specifies shared secret for all neighbors on this interface.
INT zxr10MplsInterfaceAuthType	1.3.6.1.4.1.3902.3.315.1.8.1.1.11	INTEGER	read-only	Specifies the type of authentication algorithm on this interface.
INT zxr10MplsInterfaceAuthWinSize	1.3.6.1.4.1.3902.3.315.1.8.1.1.12	INTEGER	read-only	Specifies received window size for authenticated messages on this interface.
U32 zxr10MplsInterfaceTotalBandwidth	1.3.6.1.4.1.3902.3.315.1.8.1.1.13	Unsigned32	read-only	Specifies reservable total bandwidth on this interface.
U32 zxr10MplsInterfaceAvailableBandwidth	1.3.6.1.4.1.3902.3.315.1.8.1.1.14	Unsigned32	read-only	Specifies available bandwidth on this interface.
STR zxr10MplsInterfaceMetric	1.3.6.1.4.1.3902.3.315.1.8.1.1.15	DisplayString	read-only	The config metric of mpls te interface.
INT zxr10MplsInterfaceAutobakTunnelEnable	1.3.6.1.4.1.3902.3.315.1.8.1.1.16	INTEGER	read-only	If this object is true, then it prefers NODE_PROTECT to LINK_PROTECT by autobackup tunnel.
INT zxr10MplsInterfaceAutobakTunnelNhoponly	1.3.6.1.4.1.3902.3.315.1.8.1.1.17	INTEGER	read-only	If this object is true, then it only requires LINK_PROTECT by autobackup tunnel.
STR zxr10MplsInterfaceSrlgs	1.3.6.1.4.1.3902.3.315.1.8.1.1.18	DisplayString	read-only	Specifies srlgs on this interface.
INT zxr10MplsInterfaceAttributeFlags	1.3.6.1.4.1.3902.3.315.1.8.1.1.19	INTEGER	read-only	Specifies attribute flags on this interface.
zxr10MplsIpExplicitObjects	1.3.6.1.4.1.3902.3.315.1.9
zxr10MplsIpExplicitTable	1.3.6.1.4.1.3902.3.315.1.9.1		not-accessible	Explicit-path table is user configured,the user should specify the entire path for the tunnel to take. This path may contain strict or loose hops. Each hop along a specific path SHOULD have this object set to the same value
zxr10MplsIpExplicitEntry	1.3.6.1.4.1.3902.3.315.1.9.1.1		not-accessible	Explicit-path table entry.
INT zxr10MplsIpExplicitNameType	1.3.6.1.4.1.3902.3.315.1.9.1.1.1	INTEGER	read-only	First index of Explicit-path table.
STR zxr10MplsIpExplicitName	1.3.6.1.4.1.3902.3.315.1.9.1.1.2	DisplayString	read-only	Secondary index of Explicit-path table.If the explicit name type is explicitId then this value is a number, or it is a string.
STR zxr10MplsIpExplicitType	1.3.6.1.4.1.3902.3.315.1.9.1.1.3	DisplayString	read-only	router type string list 1:strict 2:loose 3:exclude intf 4:exclude router-id eg. 1.4.3.2
STR zxr10MplsIpExplicitNextIpAddr	1.3.6.1.4.1.3902.3.315.1.9.1.1.4	DisplayString	read-only	Identify the next hop IP address,This field is a displayable string in the format of 'XXX.XXX.XXX.XXX,' repeated.Example:1.1.1.1,1.1.1.2,...
STR zxr10MplsIpExplicitIndex	1.3.6.1.4.1.3902.3.315.1.9.1.1.5	DisplayString	read-only	ip addr index,This field is a displayable string in the format of '1,2,...'.
zxr10MplsPathOptObjects	1.3.6.1.4.1.3902.3.315.1.10
zxr10MplsPathOptTable	1.3.6.1.4.1.3902.3.315.1.10.1		not-accessible	Path option Table.
zxr10MplsPathOptEntry	1.3.6.1.4.1.3902.3.315.1.10.1.1		not-accessible	Path option Table entry.
U32 zxr10MplsPathOptIndex	1.3.6.1.4.1.3902.3.315.1.10.1.1.1	Unsigned32	read-only	The index of path option whitch equals to tunnel index.
U32 zxr10MplsPathOptValue	1.3.6.1.4.1.3902.3.315.1.10.1.1.2	Unsigned32	read-only	Secondary index whitch identifies the configure value of path option .
INT zxr10MplsPathOptType	1.3.6.1.4.1.3902.3.315.1.10.1.1.3	INTEGER	read-only	If this value is dynamic ,indicates that user only specify the source and destination of the path and the CSPF will calculate the remainder of the path. If this value is explicitId or explicitName, the user specify the entire path for the tunnel . This path may contain strict or loose hops. Each hop along a specific path SHOULD have this object set to the same value.
STR zxr10MplsPathOptName	1.3.6.1.4.1.3902.3.315.1.10.1.1.4	DisplayString	read-only	This value identifier the name of the path-option,when the type of the path-option is explicitName,the other times the value is null.
INT zxr10MplsPathOptHotStandbyType	1.3.6.1.4.1.3902.3.315.1.10.1.1.5	INTEGER	read-only	Specifies the hotstandby protect type of the path-option.
STR zxr10MplsPathOptHotStandbyBackupPathName	1.3.6.1.4.1.3902.3.315.1.10.1.1.6	DisplayString	read-only	The name of Backup path.If the type of hotstandby protection is dynamic,then this value is '1'; if the type is dynamic prefer,then this value is '2'; if the type is explicitId or explicitName,then this value is a number or a string.
zxr10MplsAdminGroupListObjects	1.3.6.1.4.1.3902.3.315.1.11
zxr10MplsAdminGroupListTable	1.3.6.1.4.1.3902.3.315.1.11.1		not-accessible	List of configured administrative groups. Administrative groups are used to label links in the Traffic Engineering topology in order to place constraints (include and exclude) on LSP paths.
zxr10MplsAdminGroupListEntry	1.3.6.1.4.1.3902.3.315.1.11.1.1		not-accessible	A mapping between a configured group number and its human-readable name. The group number should be between 0 and 31, inclusive.
U32 zxr10MplsAdminGroupNumber	1.3.6.1.4.1.3902.3.315.1.11.1.1.1	Unsigned32	read-only	Index of the administrative group.
STR zxr10MplsAdminGroupName	1.3.6.1.4.1.3902.3.315.1.11.1.1.2	DisplayString	read-only	Name of the administrative group.
zxr10MplsHotStandbyLspObjects	1.3.6.1.4.1.3902.3.315.1.12
zxr10MplsHotStandbyLspTable	1.3.6.1.4.1.3902.3.315.1.12.1		not-accessible
zxr10MplsHotStandbyLspEntry	1.3.6.1.4.1.3902.3.315.1.12.1.1		not-accessible
U32 zxr10MplsHotTunnelIndex	1.3.6.1.4.1.3902.3.315.1.12.1.1.1	Unsigned32	read-only	Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading zxr10MplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the value signaled in the Tunnel Id of the Session object. When the MPLS signalling protocol is crldp(3) this value SHOULD be equal to the value signaled in the LSP ID.
U32 zxr10MplsHotTunnelInstance	1.3.6.1.4.1.3902.3.315.1.12.1.1.2	Unsigned32	read-only	Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is useful to identify multiple instances of tunnels for the purposes of backup and parallel tunnels. When the MPLS signaling protocol is rsvp(2) this value SHOULD be equal to the LSP Id of the Sender Template object. When the signaling protocol is crldp(3) there is no equivalent signaling object.
IP zxr10MplsHotTunnelIngressLSRId	1.3.6.1.4.1.3902.3.315.1.12.1.1.3	IpAddress	read-only	Identity of the ingress LSR associated with this tunnel instance. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the Tunnel Sender Address in the Sender Template object and MAY be equal to the Extended Tunnel Id field in the SESSION object. When the MPLS signalling protocol is rldp(3) this value SHOULD be equal to the Ingress LSR Router ID field in the LSPID TLV object.
IP zxr10MplsHotTunnelEgressLSRId	1.3.6.1.4.1.3902.3.315.1.12.1.1.4	IpAddress	read-only	Identity of the egress LSR associated with this tunnel instance.
U32 zxr10MplsHotTunnelOutLabel	1.3.6.1.4.1.3902.3.315.1.12.1.1.5	Unsigned32	read-only	Out label of hotstandby tunnel.
STR zxr10MplsHotTunnelOutIntf	1.3.6.1.4.1.3902.3.315.1.12.1.1.6	DisplayString	read-only	The name of out interface that hotstandby tunnel transits.
INT zxr10MplsHotTunnelRole	1.3.6.1.4.1.3902.3.315.1.12.1.1.7	INTEGER	read-only	This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value MUST be set to transit(2) at transit points along the tunnel, if transit points are supported. This value MUST be set to tail(3) at the terminating point of the tunnel if tunnel tails are supported. The value headTail(4) is provided for tunnels that begin and end on the same LSR.
STR zxr10MplsHotTunnelSessionAttributes	1.3.6.1.4.1.3902.3.315.1.12.1.1.8	DisplayString	read-only	This bit mask indicates optional session values for this tunnel.
U32 zxr10MplsHotTunnelResourcePointer	1.3.6.1.4.1.3902.3.315.1.12.1.1.9	Unsigned32	read-only	This variable represents a pointer to the traffic parameter specification for this tunnel. This value may point at an entry in the zxr10MplsTunnelResourceEntry to indicate which zxr10MplsTunnelResourceEntry is to be assigned to this LSP instance. This value may optionally point at an externally defined traffic parameter specification table. A value of zeroDotZero indicates best-effort treatment. By having the same value of this object, two or more LSPs can indicate resource sharing.
U32 zxr10MplsHotTunnelInstancePriority	1.3.6.1.4.1.3902.3.315.1.12.1.1.10	Unsigned32	read-only	This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instances is defined as a set of LSPs with the same zxr10MplsTunnelIndex in this table, but with a different zxr10MplsTunnelInstance. Tunnel instance priorities are used to denote the priority at which a particular tunnel instance will supercede another. Instances of tunnels containing the same zxr10MplsTunnelInstancePriority will be used for load sharing.
U32 zxr10MplsHotTunnelHopTableIndex	1.3.6.1.4.1.3902.3.315.1.12.1.1.11	Unsigned32	read-only	Index into the zxr10MplsTunnelHopTable entry that specifies the explicit route hops for this tunnel. This object is meaningful only at the head-end of the tunnel.
INT zxr10MplsHotTunnelPathInUse	1.3.6.1.4.1.3902.3.315.1.12.1.1.12	INTEGER	read-only	This value denotes the configured path that was chosen for this tunnel. This value reflects the secondary index into zxr10MplsTunnelHopTable. This path may not exactly match the one in zxr10MplsTunnelARHopTable due to the fact that some CSPF modification may have taken place. See zxr10MplsTunnelARHopTable for the actual path being taken by the tunnel. A value of zero denotes that no path is currently in use or available.
U32 zxr10MplsHotTunnelARHopTableIndex	1.3.6.1.4.1.3902.3.315.1.12.1.1.13	Unsigned32	read-only	Index into the zxr10MplsTunnelARHopTable entry that specifies the actual hops traversed by the tunnel. This is automatically updated by the agent when the actual hops becomes available.
U32 zxr10MplsHotTunnelCHopTableIndex	1.3.6.1.4.1.3902.3.315.1.12.1.1.14	Unsigned32	read-only	Index into the zxr10MplsTunnelCHopTable entry that specifies the computed hops traversed by the tunnel. This is automatically updated by the agent when computed hops become available or when computed hops get modified.
TIK zxr10MplsHotTunnelInstanceUpTime	1.3.6.1.4.1.3902.3.315.1.12.1.1.15	TimeTicks	read-only	This value identifies the total time that this tunnel instance's operStatus has been Up(1).
INT zxr10MplsHotTunnelOperStatus	1.3.6.1.4.1.3902.3.315.1.12.1.1.16	INTEGER	read-only	Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel.
ROW zxr10MplsHotTunnelRowStatus	1.3.6.1.4.1.3902.3.315.1.12.1.1.17	RowStatus	read-only	This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except zxr10MplsTunnelAdminStatus, zxr10MplsTunnelRowStatus and zxr10MplsTunnelStorageType.

RFC description

Manages MPLS Traffic Engineering including LSP tunnels, constraint-based routing, and traffic engineering statistics.

Start monitoring ZTE ZXR10 router (MPLS-TE tunnel signaling/RSVP-TE constraint status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-MPLS-TE-MIB

What Is ZXR10-MPLS-TE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description