All MIBs › ZXR10-MPLS-TE-MIB › zxr10MplsTunnelHopEntryPathComp
zxr10MplsTunnelHopEntryPathComp
Module: ZXR10-MPLS-TE-MIB
OID (symbolic): ZXR10-MPLS-TE-MIB::zxr10MplsTunnelHopEntryPathComp
OID (numeric): 1.3.6.1.4.1.3902.3.315.1.4.1.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: If this value is set to dynamic, then the user should only specify the source and destination of the path and expect that the CSPF will calculate the remainder of the path. If this value is set to explicit, the user should specify the entire path for the tunnel to take. This path may contain strict or loose hops. Each hop along a specific path SHOULD have this object set to the same value.
What is zxr10MplsTunnelHopEntryPathComp?
Whether this path option's hops are computed dynamic(1) (CSPF fills in the path from just source and destination) or explicit(2) (the admin specifies the full path, which may itself contain strict or loose hops); all hops in a given path should share this same setting. An admin picks explicit when they need full manual control over the tunnel's route, or dynamic to let CSPF find the best path automatically within any given constraints.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.315.1.4.1.1.13 snmpwalk -v2c -c public <target> ZXR10-MPLS-TE-MIB::zxr10MplsTunnelHopEntryPathComp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.315.1.4.1.1.13.1 snmpget -v2c -c public <target> ZXR10-MPLS-TE-MIB::zxr10MplsTunnelHopEntryPathComp.1
Start monitoring ZTE ZXR10 router (MPLS-TE tunnel signaling/RSVP-TE constraint status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-MPLS-TE-MIB::zxr10MplsTunnelHopEntryPathComp OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 router (MPLS-TE tunnel signaling/RSVP-TE constraint status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.315 | zxr10MplsTe | ZXR10-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.315.1 | zxr10MplsTeMIB | ZXR10-MPLS-TE-MIB |
| 1.3.6.1.4.1.3902.3.315.1.4 | zxr10MplsTeHopObjects | ZXR10-MPLS-TE-MIB |
| 1.3.6.1.4.1.3902.3.315.1.4.1 | zxr10MplsTunnelHopTable | ZXR10-MPLS-TE-MIB |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1 | zxr10MplsTunnelHopEntry | ZXR10-MPLS-TE-MIB |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.13 | zxr10MplsTunnelHopEntryPathComp | ZXR10-MPLS-TE-MIB |