ZXR10-MPLS-TE-MIB :: zxr10MplsInterfaceIpAddr

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZXR10-MPLS-TE-MIB › zxr10MplsInterfaceIpAddr

zxr10MplsInterfaceIpAddr

Module: ZXR10-MPLS-TE-MIB

OID (symbolic): ZXR10-MPLS-TE-MIB::zxr10MplsInterfaceIpAddr

OID (numeric): 1.3.6.1.4.1.3902.3.315.1.8.1.1.3

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-only

Description: The ip address of this interface.

What is zxr10MplsInterfaceIpAddr?

The IP address of a TE-enabled interface; this object is marked obsolete.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.315.1.8.1.1.3
snmpwalk -v2c -c public <target> ZXR10-MPLS-TE-MIB::zxr10MplsInterfaceIpAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.315.1.8.1.1.3.1
snmpget -v2c -c public <target> ZXR10-MPLS-TE-MIB::zxr10MplsInterfaceIpAddr.1

Start monitoring ZTE ZXR10 router (MPLS-TE tunnel signaling/RSVP-TE constraint status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-MPLS-TE-MIB::zxr10MplsInterfaceIpAddr OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 router (MPLS-TE tunnel signaling/RSVP-TE constraint status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.3zxr10FANS-POWER-MIB
1.3.6.1.4.1.3902.3.315zxr10MplsTeZXR10-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3902.3.315.1zxr10MplsTeMIBZXR10-MPLS-TE-MIB
1.3.6.1.4.1.3902.3.315.1.8zxr10MplsTeInterfaceObjectsZXR10-MPLS-TE-MIB
1.3.6.1.4.1.3902.3.315.1.8.1zxr10MplsInterfaceTableZXR10-MPLS-TE-MIB
1.3.6.1.4.1.3902.3.315.1.8.1.1zxr10MplsInterfaceEntryZXR10-MPLS-TE-MIB
1.3.6.1.4.1.3902.3.315.1.8.1.1.3zxr10MplsInterfaceIpAddrZXR10-MPLS-TE-MIB

Module

This MIB depends on