ZXR10-MPLS-TE-MIB :: zxr10MplsTunnelIndex

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZXR10-MPLS-TE-MIB › zxr10MplsTunnelIndex

zxr10MplsTunnelIndex

Module: ZXR10-MPLS-TE-MIB

OID (symbolic): ZXR10-MPLS-TE-MIB::zxr10MplsTunnelIndex

OID (numeric): 1.3.6.1.4.1.3902.3.315.1.2.1.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading zxr10MplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the value signaled in the Tunnel Id of the Session object. When the MPLS signalling protocol is crldp(3) this value SHOULD be equal to the value signaled in the LSP ID.

What is zxr10MplsTunnelIndex?

Uniquely identifies a set of tunnel instances between a given pair of ingress and egress LSRs; new values for creating a row should come from reading zxr10MplsTunnelIndexNext. For RSVP-signaled tunnels this should match the Tunnel Id in the Session object, and for CR-LDP tunnels it should match the LSP ID. An admin uses this as the primary tunnel identifier when looking up or provisioning a specific TE tunnel.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.315.1.2.1.1.1
snmpwalk -v2c -c public <target> ZXR10-MPLS-TE-MIB::zxr10MplsTunnelIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.315.1.2.1.1.1.1
snmpget -v2c -c public <target> ZXR10-MPLS-TE-MIB::zxr10MplsTunnelIndex.1

Start monitoring ZTE ZXR10 router (MPLS-TE tunnel signaling/RSVP-TE constraint status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-MPLS-TE-MIB::zxr10MplsTunnelIndex OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 router (MPLS-TE tunnel signaling/RSVP-TE constraint status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.3zxr10FANS-POWER-MIB
1.3.6.1.4.1.3902.3.315zxr10MplsTeZXR10-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3902.3.315.1zxr10MplsTeMIBZXR10-MPLS-TE-MIB
1.3.6.1.4.1.3902.3.315.1.2zxr10MplsTeTunnelObjectsZXR10-MPLS-TE-MIB
1.3.6.1.4.1.3902.3.315.1.2.1zxr10MplsTunnelTableZXR10-MPLS-TE-MIB
1.3.6.1.4.1.3902.3.315.1.2.1.1zxr10MplsTunnelEntryZXR10-MPLS-TE-MIB
1.3.6.1.4.1.3902.3.315.1.2.1.1.1zxr10MplsTunnelIndexZXR10-MPLS-TE-MIB