All MIBs › ZXR10-MPLS-TE-MIB › zxr10MplsTunnelInstancePriority
zxr10MplsTunnelInstancePriority
Module: ZXR10-MPLS-TE-MIB
OID (symbolic): ZXR10-MPLS-TE-MIB::zxr10MplsTunnelInstancePriority
OID (numeric): 1.3.6.1.4.1.3902.3.315.1.2.1.1.23
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instances is defined as a set of LSPs with the same zxr10MplsTunnelIndex in this table, but with a different zxr10MplsTunnelInstance. Tunnel instance priorities are used to denote the priority at which a particular tunnel instance will supercede another. Instances of tunnels containing the same zxr10MplsTunnelInstancePriority will be used for load sharing.
What is zxr10MplsTunnelInstancePriority?
The priority, in descending order with 0 as lowest, of this instance within a group of tunnel instances sharing the same zxr10MplsTunnelIndex but different zxr10MplsTunnelInstance values; instances with the same priority are used for load sharing, and a higher priority instance supersedes a lower one. An admin uses this to control which backup instance takes over first, or to configure equal-priority instances for load balancing across multiple parallel LSPs.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.315.1.2.1.1.23 snmpwalk -v2c -c public <target> ZXR10-MPLS-TE-MIB::zxr10MplsTunnelInstancePriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.315.1.2.1.1.23.1 snmpget -v2c -c public <target> ZXR10-MPLS-TE-MIB::zxr10MplsTunnelInstancePriority.1
Start monitoring ZTE ZXR10 router (MPLS-TE tunnel signaling/RSVP-TE constraint status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-MPLS-TE-MIB::zxr10MplsTunnelInstancePriority OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 router (MPLS-TE tunnel signaling/RSVP-TE constraint status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.315 | zxr10MplsTe | ZXR10-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.315.1 | zxr10MplsTeMIB | ZXR10-MPLS-TE-MIB |
| 1.3.6.1.4.1.3902.3.315.1.2 | zxr10MplsTeTunnelObjects | ZXR10-MPLS-TE-MIB |
| 1.3.6.1.4.1.3902.3.315.1.2.1 | zxr10MplsTunnelTable | ZXR10-MPLS-TE-MIB |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1 | zxr10MplsTunnelEntry | ZXR10-MPLS-TE-MIB |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.23 | zxr10MplsTunnelInstancePriority | ZXR10-MPLS-TE-MIB |