Description: The zxr10MplsTunnelCHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in zxr10MplsTunnelTable, as computed by a constraintbased routing protocol, based on the zxr10MplsTunnelHopTable for the outgoing direction of the tunnel. Thus at a transit LSR, this table (if the table is supported) MAY contain the path computed by the CSPF engine on (or on behalf of) this LSR. Each row in this table is indexed by zxr10MplsTunnelCHopListIndex. Each row also has a secondary index zxr10MplsTunnelCHopIndex, corresponding to the next hop that this row corresponds to. In case we want to specify a particular interface on the originating LSR of an outgoing tunnel by which we want packets to exit the LSR, we specify this as the first hop for this tunnel in zxr10MplsTunnelCHopTable. lease note that since the information necessary to build entries within this table may not be supported by some LSRs, implementation of this table is optional. Furthermore, since the information in this table describes the path computed by the CSPF engine the entries in this table are read-only.