ZXR10-MPLS-LDP-MIB

All MIBs › ZXR10-MPLS-LDP-MIB

Organization: Multiprotocol Label Switching (mpls) Working Group

Last Updated: 2015-11-26

Category: ZTE ZXR10 MPLS and Traffic Engineering

Description: Manages ZTE ZXR10 MPLS LDP sessions, label bindings, and neighbor adjacency state information.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-MPLS-LDP-MIB?

ZXR10-MPLS-LDP-MIB is a Multiprotocol Label Switching (mpls) Working Group-style MIB (enterprise OID 3902, ZTE ZXR10 implementation) managing LDP (Label Distribution Protocol) FEC-to-label bindings. Its FEC table, keyed by index, records FEC type/address type/address/length and state, while additional objects track LSP FEC/length, LSP-down reason, router ID, session-down reason, outgoing interface name, ingress/transit octet and packet counts, LSP-up/down events (with reason), and lost-ingress octet/packet counts. As a status/performance MIB it lets an administrator confirm LDP FEC binding state and watch LSP traffic volume and down-events on a ZTE ZXR10 MPLS router. It is deployed on ZTE Corporation ZXR10 MPLS router platforms (LDP). Engineers can download the ZXR10-MPLS-LDP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-MPLS-LDP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE Corporation ZXR10 MPLS router platforms (LDP)

Monitoring Examples

An administrator checks zxr10LdpFecState and zxr10LdpFecLspDownReason to diagnose a failed LDP label-switched path on a ZTE ZXR10 MPLS router.

What Can Be Monitored

LDP FEC binding state and LSP traffic/down-events

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType

From MPLS-TC-STD-MIB

MplsLdpIdentifier

From SNMPv2-SMI

Counter32
Counter64
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
TimeStamp

How to Use in IPNetwork Monitor

Example using zxr10LdpIngressOctets OID:

Select a ZTE Corporation ZXR10 MPLS router platform, LDP (FEC-to-label binding/LSP up-down-event status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type zxr10LdpIngressOctets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of octets of traffic originated on this box, forwarded over the current LDP FEC. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902
zxr10	1.3.6.1.4.1.3902.3
zxr10MplsLdp	1.3.6.1.4.1.3902.3.314
zxr10mplsLdpMIB	1.3.6.1.4.1.3902.3.314.1			This MIB contains managed object definitions for the 'Multiprotocol Label Switching, Label Distribution Protocol, LDP' document.
zxr10LdpTrapVarsObject	1.3.6.1.4.1.3902.3.314.1.5
IP zxr10LdpLspFec	1.3.6.1.4.1.3902.3.314.1.5.1	InetAddress	accessible-for-notify	The LSP FEC in IP address format.
ADR zxr10LdpLspFecLen	1.3.6.1.4.1.3902.3.314.1.5.2	InetAddressPrefixLength	accessible-for-notify	The length in bits of the LSP FEC prefix.
INT zxr10LdpLspDownReason	1.3.6.1.4.1.3902.3.314.1.5.3	INTEGER	accessible-for-notify	The reason why the LSP went down. Can be one of the following: the topology changed, the neighbor withdrew the label, the neighbor went down, the filter changed, the BFD session went down or the reason is unknown.
IP zxr10LdpRtrid	1.3.6.1.4.1.3902.3.314.1.5.4	InetAddress	accessible-for-notify	The router id of the sending router.
INT zxr10LdpSesDownReason	1.3.6.1.4.1.3902.3.314.1.5.5	INTEGER	accessible-for-notify	The reason why the session transitioned to nonexistent state. Can be one of the following: unknown reason, hold time expired, connection time expired, all adjacencies down, received bad tlv, received bad pdu, connection error, connection reset, received notification from peer, received unexpected end-of-file, clear mpls ldp, error during initialization, graceful restart was aborted or client command.
STR zxr10LdpOutIfName	1.3.6.1.4.1.3902.3.314.1.5.6	DisplayString	accessible-for-notify	The name of the interface.
IPt zxr10LdpLspFecAddrType	1.3.6.1.4.1.3902.3.314.1.5.7	InetAddressType	accessible-for-notify	The Internet address type of the LSP FEC .
IPt zxr10LdpRtridAddrType	1.3.6.1.4.1.3902.3.314.1.5.8	InetAddressType	accessible-for-notify	The Internet address type of the router id .
zxr10LdpFecTable	1.3.6.1.4.1.3902.3.314.1.6		not-accessible	Fec Table. This table contains one entry per fec table.
zxr10LdpFecEntry	1.3.6.1.4.1.3902.3.314.1.6.1		not-accessible	The parameter of a fec entity containing statistics information about a particular LDP FEC.
U32 zxr10LdpFecIndex	1.3.6.1.4.1.3902.3.314.1.6.1.1	Unsigned32	read-only	The index which uniquely identifies this entry.
INT zxr10LdpFecType	1.3.6.1.4.1.3902.3.314.1.6.1.2	INTEGER	read-only	The type of this LDP FEC. If the value of this object is 'indirect (0)' then the FEC type described by this row is for address prefixes and not included in local address list. If the value of this object is 'direct (1)' then the FEC type described by this row is for address prefixes and included in local address list. If the value of this object is 'me(2)' then the FEC type described by this row is for a host address. If the value of this object is 'invalid(3)' then the FEC value is 'FFFF'.
IPt zxr10LdpFecAddrType	1.3.6.1.4.1.3902.3.314.1.6.1.3	InetAddressType	read-only	The value of this object is the type of the Internet address. The value of this object, decides how the value of the zxr10LdpFecAddr object is interpreted.
IP zxr10LdpFecAddr	1.3.6.1.4.1.3902.3.314.1.6.1.4	InetAddress	read-only	LDP FEC address.
ADR zxr10LdpFecAddrLength	1.3.6.1.4.1.3902.3.314.1.6.1.5	InetAddressPrefixLength	read-only	The LDP FEC length (in bits).
INT zxr10LdpFecState	1.3.6.1.4.1.3902.3.314.1.6.1.6	INTEGER	read-only	The state of this LDP FEC. If the FEC exists with the local popular tag and the outgoing label then the value of this object is 'ok(1)'. If the FEC exists with the local explicit or implicit null tag then the value of this object is 'egress(2)'. If the FEC exists with the local popluar tag only then the value of this object is 'noOutLabel(3)'. If the FEC exists without local tag then the value of this object is 'noInLabel(4)'.
C64 zxr10LdpIngressOctetsEx	1.3.6.1.4.1.3902.3.314.1.6.1.7	Counter64	read-only	The number of octets of traffic originated on this box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
C64 zxr10LdpIngressPackets	1.3.6.1.4.1.3902.3.314.1.6.1.8	Counter64	read-only	The number of packets of traffic originated on this box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
C64 zxr10LdpTransitOctets	1.3.6.1.4.1.3902.3.314.1.6.1.9	Counter64	read-only	The number of octets of traffic destined to this FEC, originated on a different box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
C64 zxr10LdpTransitPackets	1.3.6.1.4.1.3902.3.314.1.6.1.10	Counter64	read-only	The number of packets of traffic destined to this FEC, originated on a different box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
TIM zxr10LdpFecLspUp	1.3.6.1.4.1.3902.3.314.1.6.1.11	TimeStamp	read-only	The value of sysUpTime at the time of the most recent change in state of LSP about FEC from down to up. If no such changes have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
TIM zxr10LdpFecLspDown	1.3.6.1.4.1.3902.3.314.1.6.1.12	TimeStamp	read-only	The value of sysUpTime at the time of the most recent change in state of LSP about FEC from up to down. If no such changes have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
INT zxr10LdpFecLspDownReason	1.3.6.1.4.1.3902.3.314.1.6.1.13	INTEGER	read-only	The reason why the LSP went down about the most recent change in state of LSP from up to down. Can be one of the following: the topology changed, the neighbor withdrew the label, the neighbor went down, the filter changed, the BFD session went down or the reason is unknown. If no such changes have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
C64 zxr10LdpLostIngressOctets	1.3.6.1.4.1.3902.3.314.1.6.1.14	Counter64	read-only	The number of octets of traffic lost on this box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
C64 zxr10LdpLostIngressPackets	1.3.6.1.4.1.3902.3.314.1.6.1.15	Counter64	read-only	The number of packets of traffic lost on this box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
C64 zxr10LdpLostTransitOctets	1.3.6.1.4.1.3902.3.314.1.6.1.16	Counter64	read-only	The number of lost octets of traffic destined to this FEC, originated on a different box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
C64 zxr10LdpLostTransitPackets	1.3.6.1.4.1.3902.3.314.1.6.1.17	Counter64	read-only	The number of lost packets of traffic destined to this FEC, originated on a different box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes delay. The delay is controllable by ldp statistics gathering interval, which by default is 5 minutes.
zxr10LdpBfdTable	1.3.6.1.4.1.3902.3.314.1.7		not-accessible	Bfd Table. This table contains one entry per bfd table.
zxr10LdpBfdEntry	1.3.6.1.4.1.3902.3.314.1.7.1		not-accessible	The parameter of a bfd entity.
IPt zxr10LdpBfdAddrType	1.3.6.1.4.1.3902.3.314.1.7.1.1	InetAddressType	not-accessible	The value of this object is the type of the Internet address. The value of this object, decides how the value of the zxr10LdpBfdDstAddr object is interpreted.
IP zxr10LdpBfdDstAddr	1.3.6.1.4.1.3902.3.314.1.7.1.2	InetAddress	not-accessible	The address about FEC related to BFD.
ADR zxr10LdpBfdPrefixLength	1.3.6.1.4.1.3902.3.314.1.7.1.3	InetAddressPrefixLength	not-accessible	The mask length of the FEC related to BFD.
U32 zxr10LdpBfdMinTxInterval	1.3.6.1.4.1.3902.3.314.1.7.1.4	Unsigned32	read-only	The time span that two control package is send.
U32 zxr10LdpBfdMinRxInterval	1.3.6.1.4.1.3902.3.314.1.7.1.5	Unsigned32	read-only	The time span that two control package is received.
U32 zxr10LdpBfdMult	1.3.6.1.4.1.3902.3.314.1.7.1.6	Unsigned32	read-only	If this parameter multiply zxr10LdpBfdMinRxInterval a control message is no received it means the lsp has some problem.
INT zxr10LdpBfdLspEffect	1.3.6.1.4.1.3902.3.314.1.7.1.7	INTEGER	read-only	A fec needs bfd protection.
INT zxr10LdpBfdIfUp	1.3.6.1.4.1.3902.3.314.1.7.1.8	INTEGER	read-only	If the bfd is up.
IP zxr10LdpBfdSrcAddr	1.3.6.1.4.1.3902.3.314.1.7.1.9	InetAddress	read-only	The source address specified with package of LSP PING.
INT zxr10LdpBfdProtectBind	1.3.6.1.4.1.3902.3.314.1.7.1.10	INTEGER	read-only	FRR or ECMP protect bind flag. If the value is 1,then not support protect bind. If the value is 2,then support protect bind.
zxr10LdpGrTable	1.3.6.1.4.1.3902.3.314.1.8		not-accessible	GR Table. This table contains one entry per GR table.
zxr10LdpGrEntry	1.3.6.1.4.1.3902.3.314.1.8.1		not-accessible	The parameter of a GR entity about session.
OID zxr10LdpGrSessLocalId	1.3.6.1.4.1.3902.3.314.1.8.1.1	MplsLdpIdentifier	read-only	The identifier of local lsr used to identify a session relating GR.
OID zxr10LdpGrSessPeerId	1.3.6.1.4.1.3902.3.314.1.8.1.2	MplsLdpIdentifier	read-only	The identifier of peer lsr used to identify a session relating GR.
INT zxr10LdpGrSessRestart	1.3.6.1.4.1.3902.3.314.1.8.1.3	INTEGER	read-only	If the session supports GR.
U32 zxr10LdpGrSessNeighborLiveTime	1.3.6.1.4.1.3902.3.314.1.8.1.4	Unsigned32	read-only	The max time(seconds) of the lsr can wait to reconnect with peer lsr in GR process.
U32 zxr10LdpGrSessMaxRecoveryTime	1.3.6.1.4.1.3902.3.314.1.8.1.5	Unsigned32	read-only	The max time(seconds) of the session mapping the label from the peer lsr after reconnect with peer lsr in GR process.
INT zxr10LdpSessIsInGr	1.3.6.1.4.1.3902.3.314.1.8.1.6	INTEGER	read-only	If the session is in GR process.
INT zxr10LdpGrSessState	1.3.6.1.4.1.3902.3.314.1.8.1.7	INTEGER	read-only	Indicates the status of the GR session.
U32 zxr10LdpGrSessWaitTime	1.3.6.1.4.1.3902.3.314.1.8.1.8	Unsigned32	read-only	The remaining time(seconds) of waiting for session reconnection and recovering in GR process. If the value of zxr10LdpSessIsInGr is false, then the value of this object is zero.
zxr10LdpInterfaceTable	1.3.6.1.4.1.3902.3.314.1.9		not-accessible	Interface Table. This table contains one entry per interface table.
zxr10LdpInterfaceEntry	1.3.6.1.4.1.3902.3.314.1.9.1		not-accessible	The parameter of an interface entity relating LDP.
IPt zxr10LdpInterfaceType	1.3.6.1.4.1.3902.3.314.1.9.1.1	InetAddressType	read-only	The value of this object is the type of the Internet address. The value of this object, decides how the value of the zxr10LdpInterfaceAddr object is interpreted.
U32 zxr10LdpInterfaceIndex	1.3.6.1.4.1.3902.3.314.1.9.1.2	Unsigned32	read-only	The index of the interface.
STR zxr10LdpInterfaceName	1.3.6.1.4.1.3902.3.314.1.9.1.3	DisplayString	read-only	The name of the interface.
IP zxr10LdpInterfaceAddr	1.3.6.1.4.1.3902.3.314.1.9.1.4	InetAddress	read-only	The host ip address of the interface.
INT zxr10LdpInterfaceAdminStatus	1.3.6.1.4.1.3902.3.314.1.9.1.5	INTEGER	read-only	The administer status of the interface.
INT zxr10LdpInterfaceOperStatus	1.3.6.1.4.1.3902.3.314.1.9.1.6	INTEGER	read-only	The optrater status of the interface.
IP zxr10LdpInterfaceTransAddress	1.3.6.1.4.1.3902.3.314.1.9.1.7	InetAddress	read-only	IP address to use for LDP transport address.
IPt zxr10LdpInterfaceTransAddrType	1.3.6.1.4.1.3902.3.314.1.9.1.8	InetAddressType	read-only	The value of this object is the type of the Internet address. The value of this object, decides how the value of the zxr10LdpInterfaceTransAddress object is interpreted.
zxr10LdpLabelAdvertiseTable	1.3.6.1.4.1.3902.3.314.1.10		not-accessible	Acl Table. This table contains one entry per acl table.
zxr10LdpLabelAdvertiseEntry	1.3.6.1.4.1.3902.3.314.1.10.1		not-accessible	The parameter of an acl entry relating label advertisement.
STR zxr10LdpLabelAdvertiseForACL	1.3.6.1.4.1.3902.3.314.1.10.1.1	DisplayString	read-only	The acl number used to filtrate which labels is acceptable.
STR zxr10LdpLabelAdvertiseToAcl	1.3.6.1.4.1.3902.3.314.1.10.1.2	DisplayString	read-only	The acl number used to filtrate destination of the label sent.
zxr10LdpEntityHelloIntervTable	1.3.6.1.4.1.3902.3.314.1.11		not-accessible	Hello Table. This table contains one entry per hello table.
zxr10LdpEntityHelloIntervEntry	1.3.6.1.4.1.3902.3.314.1.11.1		not-accessible	The parameter of a hello entity entry.
OID zxr10LdpEntityHelloLocalId	1.3.6.1.4.1.3902.3.314.1.11.1.1	MplsLdpIdentifier	read-only	The identifier of local lsr used to identify a session.
OID zxr10LdpEntityHelloPeerId	1.3.6.1.4.1.3902.3.314.1.11.1.2	MplsLdpIdentifier	read-only	The identifier of peer lsr used to identify a session.
U32 zxr10LdpEntityHelloMibIndex	1.3.6.1.4.1.3902.3.314.1.11.1.3	Unsigned32	read-only	An identifier for this specific adjacency.
U32 zxr10LdpEntityHelloIfIndex	1.3.6.1.4.1.3902.3.314.1.11.1.4	Unsigned32	read-only	The index of interface about hello. If the value is 0xFFFFFFFF then the hello type is targeted-hello.
IPt zxr10LdpEntityHelloNexthopAddrType	1.3.6.1.4.1.3902.3.314.1.11.1.5	InetAddressType	read-only	The value of this object is the type of the Internet address. The value of this object, decides how the value of the zxr10LdpEntityHelloNexthopAddr object is interpreted.
IP zxr10LdpEntityHelloNexthopAddr	1.3.6.1.4.1.3902.3.314.1.11.1.6	InetAddress	read-only	The Nexthop Address about hello.
U32 zxr10LdpEntityHelloHoldTimer	1.3.6.1.4.1.3902.3.314.1.11.1.7	Unsigned32	read-only	The max time between two recving hello message.
U32 zxr10LdpEntityHelloSendTimer	1.3.6.1.4.1.3902.3.314.1.11.1.8	Unsigned32	read-only	The time span between two sending hello message.
zxr10LdpMd5Table	1.3.6.1.4.1.3902.3.314.1.12		not-accessible	Ldp MD5 Table. This table contains one entry per MD5 table.
zxr10LdpMd5Entry	1.3.6.1.4.1.3902.3.314.1.12.1		not-accessible	The parameter of a MD5 entry containing information about the session set password.
IP zxr10LdpMd5NeighborAddr	1.3.6.1.4.1.3902.3.314.1.12.1.1	IpAddress	read-only	The peer address as the index of MD5.
INT zxr10LdpMd5PwdFlag	1.3.6.1.4.1.3902.3.314.1.12.1.2	INTEGER	read-only	If the MD5 is successfully registered.
STR zxr10LdpMd5Pwd	1.3.6.1.4.1.3902.3.314.1.12.1.3	DisplayString	read-only	The password used for communication between lsrs.
INT zxr10LdpMd5Encrypt	1.3.6.1.4.1.3902.3.314.1.12.1.4	INTEGER	read-only	The password is encrypted.
zxr10LdpSessTable	1.3.6.1.4.1.3902.3.314.1.13		not-accessible	Ldp Session Table. This table contains one entry per session if it is successfully registered.
zxr10LdpSessEntry	1.3.6.1.4.1.3902.3.314.1.13.1		not-accessible	The parameter of a session entry containing information about the session.
OID zxr10LdpSessLocalId	1.3.6.1.4.1.3902.3.314.1.13.1.1	MplsLdpIdentifier	read-only	The identifier of local lsr used to identify a session.
OID zxr10LdpSessPeerId	1.3.6.1.4.1.3902.3.314.1.13.1.2	MplsLdpIdentifier	read-only	The identifier of peer lsr used to identify a session.
U32 zxr10LdpSessHelloNumber	1.3.6.1.4.1.3902.3.314.1.13.1.3	Unsigned32	read-only	The hello adjacency numbers of the session.
U32 zxr10LdpSessKeepAlive	1.3.6.1.4.1.3902.3.314.1.13.1.4	Unsigned32	read-only	The time show how long the session should be keep alive if no ldp message or the session disappeared.
U32 zxr10LdpSessCurBkoff	1.3.6.1.4.1.3902.3.314.1.13.1.5	Unsigned32	read-only	The time shows how long the session should wait to try to reconnect with peer lsr.
U32 zxr10LdpSessTcpRetry	1.3.6.1.4.1.3902.3.314.1.13.1.6	Unsigned32	read-only	The time of the lsr retry to create a session with peer lsr.
U32 zxr10LdpSessLife	1.3.6.1.4.1.3902.3.314.1.13.1.7	Unsigned32	read-only	The time after the session receive last ldp message.
INT zxr10LdpSessState	1.3.6.1.4.1.3902.3.314.1.13.1.8	INTEGER	read-only	Indicates the status of the session.
STR zxr10LdpSessIfName	1.3.6.1.4.1.3902.3.314.1.13.1.9	DisplayString	read-only	The name of the interface about session up or down. And the value of object is 'null' When target session sets up.
TIM zxr10LdpSessionUp	1.3.6.1.4.1.3902.3.314.1.13.1.10	TimeStamp	read-only	The value of sysUpTime at the time of the most recent change in state of session from openrec(3) or opensent(4) to operational(5). If no such changes have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
TIM zxr10LdpSessionDown	1.3.6.1.4.1.3902.3.314.1.13.1.11	TimeStamp	read-only	The value of sysUpTime at the time of the most recent change in state of session from operational(5) to nonexistent(1). If no such changes have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
INT zxr10LdpSessionDownReason	1.3.6.1.4.1.3902.3.314.1.13.1.12	INTEGER	read-only	The reason why the session transitioned from operational to nonexistent state. Can be one of the following: unknown reason, hold time expired, connection time expired, all adjacencies down, received bad tlv, received bad pdu, connection error, connection reset, received notification from peer, received unexpected end-of-file, clear mpls ldp, error during initialization, graceful restart was aborted or client command. If no such changes have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
zxr10LdpLsrAttrObjects	1.3.6.1.4.1.3902.3.314.1.14
IP zxr10LdpLsrId	1.3.6.1.4.1.3902.3.314.1.14.1	IpAddress	read-only	The router id of the LSR.
STR zxr10LdpInstanceName	1.3.6.1.4.1.3902.3.314.1.14.2	DisplayString	read-only	The name of the VPN instance.
INT zxr10LdpMplsIp	1.3.6.1.4.1.3902.3.314.1.14.3	INTEGER	read-only	Show if the mpls ldp is up.
INT zxr10LdpTrap	1.3.6.1.4.1.3902.3.314.1.14.4	INTEGER	read-create	If the value of this object is 1, then the function of Ldp Trap is enable.
STR zxr10LdpAccessFecACL	1.3.6.1.4.1.3902.3.314.1.14.5	DisplayString	read-only	The ACL name about LDP fec filter.
INT zxr10LdpAccessFecBgp	1.3.6.1.4.1.3902.3.314.1.14.6	INTEGER	read-only	If the value of this object is 1, then access bgp route as fec.
INT zxr10LdpAccessFecHost	1.3.6.1.4.1.3902.3.314.1.14.7	INTEGER	read-only	If the value of this object is 1, then access host route as fec only.
U32 zxr10LdpDirectHelloHoldTime	1.3.6.1.4.1.3902.3.314.1.14.8	Unsigned32	read-only	LDP discovery direct hello holdtime. A value of 0 means the default, which is 15 seconds for Link Hellos and 45 seconds for Targeted Hellos. A value of 65535 indicates an infinite hello hold time.
U32 zxr10LdpDirectHelloInterTime	1.3.6.1.4.1.3902.3.314.1.14.9	Unsigned32	read-only	LDP discovery direct hello interval. A value of 0 means the default, which is 5 seconds for Link Hellos and 15 seconds for Targeted Hellos. A value of 65535 indicates an infinite hello interval time.
U32 zxr10LdpTargetHelloHoldTime	1.3.6.1.4.1.3902.3.314.1.14.10	Unsigned32	read-only	LDP discovery target hello holdtime. A value of 0 means the default, which is 15 seconds for Link Hellos and 45 seconds for Targeted Hellos. A value of 65535 indicates an infinite hello hold time.
U32 zxr10LdpTargetHelloInterTime	1.3.6.1.4.1.3902.3.314.1.14.11	Unsigned32	read-only	LDP discovery target hello interval. A value of 0 means the default, which is 5 seconds for Link Hellos and 15 seconds for Targeted Hellos. A value of 65535 indicates an infinite hello interval time.
U32 zxr10LdpBackoffInitialTime	1.3.6.1.4.1.3902.3.314.1.14.12	Unsigned32	read-only	Initial session backoff time in seconds. A value of 0 means the default, which is 15 seconds for Initial backoff time and 120 seconds for Maximum backoff time. A value of 65535 indicates an infinite backoff time.
U32 zxr10LdpBackoffMaximumTime	1.3.6.1.4.1.3902.3.314.1.14.13	Unsigned32	read-only	Maximum session backoff time in seconds. A value of 0 means the default, which is 15 seconds for Initial backoff time and 120 seconds for Maximum backoff time. A value of 65535 indicates an infinite backoff time.
STR zxr10LdpEgressFor	1.3.6.1.4.1.3902.3.314.1.14.14	DisplayString	read-only	Acl specifying controls on destination prefixes.
STR zxr10LdpEgressNextHop	1.3.6.1.4.1.3902.3.314.1.14.15	DisplayString	read-only	Acl specifying controls on nexthop.
INT zxr10LdpConnWithDod	1.3.6.1.4.1.3902.3.314.1.14.16	INTEGER	read-only	If the value of this object is 1, then the LDP connect with dod mode LSR is enable.
INT zxr10LdpExplicitNull	1.3.6.1.4.1.3902.3.314.1.14.17	INTEGER	read-only	If the value of this object is 1, then advertise explicit null label in place of implicit null.
STR zxr10LdpExplicitNullFor	1.3.6.1.4.1.3902.3.314.1.14.18	DisplayString	read-only	Acl specifying controls on destination prefixes.
STR zxr10LdpExplicitNullTo	1.3.6.1.4.1.3902.3.314.1.14.19	DisplayString	read-only	Acl specifying controls on LDP peers.
U32 zxr10LdpHoldTime	1.3.6.1.4.1.3902.3.314.1.14.20	Unsigned32	read-only	LDP session holdtime is set. A value of 0 means the default, which is 15 seconds for session holdtime. A value of 65535 indicates an infinite hold time.
STR zxr10LdpLabelRequestFor	1.3.6.1.4.1.3902.3.314.1.14.21	DisplayString	read-only	ACL name about specify acceptable downstream on demand dest.
INT zxr10LdpLabelAdvertise	1.3.6.1.4.1.3902.3.314.1.14.22	INTEGER	read-only	If the value of this object is 1, then label advertise is enable.
INT zxr10LdpLabelAdvertiseOldStyle	1.3.6.1.4.1.3902.3.314.1.14.23	INTEGER	read-only	If the value of this object is 1, then label advertise use old style(TDP) method for matching prefix acl.
INT zxr10LdpStyle	1.3.6.1.4.1.3902.3.314.1.14.24	INTEGER	read-only	If the value of this object is 1, then the new style to reset keepalive timer is enable.
INT zxr10LdpDebugAdvertisements	1.3.6.1.4.1.3902.3.314.1.14.25	INTEGER	read-only	If the value of this object is 1, then LDP debug information of label and address advertisements could be get.
INT zxr10LdpDebugBindings	1.3.6.1.4.1.3902.3.314.1.14.26	INTEGER	read-only	If the value of this object is 1, then LDP debug information of Label bindings and other label Information base (LIB) changes could be get.
INT zxr10LdpDebugMessagesReceived	1.3.6.1.4.1.3902.3.314.1.14.27	INTEGER	read-only	If the value of this object is 1, then LDP debug information of LDP received messages, including periodic keep alive could be get.
INT zxr10LdpDebugMessagesSent	1.3.6.1.4.1.3902.3.314.1.14.28	INTEGER	read-only	If the value of this object is 1, then LDP debug information of LDP sent messages, including periodic keep alive could be get.
INT zxr10LdpDebugSessionIO	1.3.6.1.4.1.3902.3.314.1.14.29	INTEGER	read-only	If the value of this object is 1, then LDP debug information of session could be get.
INT zxr10LdpDebugSessionStateMachine	1.3.6.1.4.1.3902.3.314.1.14.30	INTEGER	read-only	If the value of this object is 1, then LDP debug information of session state machine could be get.
INT zxr10LdpDebugTransportConnections	1.3.6.1.4.1.3902.3.314.1.14.31	INTEGER	read-only	If the value of this object is 1, then LDP debug information of transport and discovery connections could be get.
INT zxr10LdpDebugTransportEvents	1.3.6.1.4.1.3902.3.314.1.14.32	INTEGER	read-only	If the value of this object is 1, then LDP debug information of transport and discovery events could be get.
U32 zxr10LdpInstanceNo	1.3.6.1.4.1.3902.3.314.1.14.33	Unsigned32	read-only	The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
STR zxr10LdpRouterIdIf	1.3.6.1.4.1.3902.3.314.1.14.34	DisplayString	read-only	The interface selected to prefer for LDP identifier address.
zxr10LdpNotify	1.3.6.1.4.1.3902.3.314.1.15
NTF zxr10LdpSesUp	1.3.6.1.4.1.3902.3.314.1.15.1			The SNMP trap that is generated when the value of 'zxr10MplsLdpSesState' enters the 'operational(5) state.
NTF zxr10LdpSesDown	1.3.6.1.4.1.3902.3.314.1.15.2			The SNMP trap that is generated when the value of 'zxr10MplsLdpSesState' leaves the 'operational(5) state. The value of zxr10LdpSesDownIf is one of the neighbor's interface. It is the interface associated with the last neighbor when zxr10LdpSesDownReason is allAdjacenciesDown (3).
NTF zxr10LdpLspUp	1.3.6.1.4.1.3902.3.314.1.15.3			The SNMP trap that is generated when an LSP comes up.
NTF zxr10LdpLspDown	1.3.6.1.4.1.3902.3.314.1.15.4			The SNMP trap that is generated when the LSP goes down.
NTF zxr10LdpLspPathUp	1.3.6.1.4.1.3902.3.314.1.15.5			An mplsLspPathUp trap signifies that the specified path mplsPathName for the specified LSP mplsLspName came up.
NTF zxr10LdpLspPathDown	1.3.6.1.4.1.3902.3.314.1.15.6			An mplsLspPathDown trap signifies that the specified path mplsPathName for the specified LSP mplsLspName went down.
NTF zxr10LdpLspChange	1.3.6.1.4.1.3902.3.314.1.15.7			An mplsLspChange trap signifies that the specified LSP has switched traffic to the new active path 'toLspPath'. The LSP maintains up state before and after the switch over.
zxr10LdpInstCfgTable	1.3.6.1.4.1.3902.3.314.1.16		not-accessible	Ldp Instance Table. This table contains one entry per instance table.
zxr10LdpInstCfgEntry	1.3.6.1.4.1.3902.3.314.1.16.1		not-accessible	The parameter of an instance entity about ldp instance.
U32 zxr10LdpInstNo	1.3.6.1.4.1.3902.3.314.1.16.1.1	Unsigned32	not-accessible	The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
STR zxr10LdpFilterPaketFor	1.3.6.1.4.1.3902.3.314.1.16.1.2	DisplayString	read-only	ACL name about specify filter packet on source address.
INT zxr10LdpGr	1.3.6.1.4.1.3902.3.314.1.16.1.3	INTEGER	read-only	Show if the mpls ldp graceful-restart is enabled.
U32 zxr10LdpGrMaxRecoveryTime	1.3.6.1.4.1.3902.3.314.1.16.1.4	Unsigned32	read-only	LDP session max recovery time is set. Default is 120 seconds.
U32 zxr10LdpGrNeiLivenessTime	1.3.6.1.4.1.3902.3.314.1.16.1.5	Unsigned32	read-only	LDP session keeps its stale label-FEC bindings is set. Default is 120 seconds.
INT zxr10LdpLabelRetentionMode	1.3.6.1.4.1.3902.3.314.1.16.1.6	INTEGER	read-only	Show the mpls ldp label retention mode.
INT zxr10LdpLspControlMode	1.3.6.1.4.1.3902.3.314.1.16.1.7	INTEGER	read-only	Show the mpls ldp lsp control mode.
STR zxr10LdpTrafficCntAcl	1.3.6.1.4.1.3902.3.314.1.16.1.8	DisplayString	read-only	ACL name about specify IPv4 fec want to get traffic count.
INT zxr10LdpGlblAutoCfgMode	1.3.6.1.4.1.3902.3.314.1.16.1.9	INTEGER	read-only	Show the mpls ldp IPv4 interface global auto config mode.
STR zxr10LdpV6TrafficCntAcl	1.3.6.1.4.1.3902.3.314.1.16.1.10	DisplayString	read-only	ACL name about specify IPv6 fec want to get traffic count.
INT zxr10LdpV6GlblAutoCfgMode	1.3.6.1.4.1.3902.3.314.1.16.1.11	INTEGER	read-only	Show the mpls ldp IPv6 interface global auto config mode.
zxr10LdpV4IntfCfgTable	1.3.6.1.4.1.3902.3.314.1.17		not-accessible	Ipv4 Ldp Interface Table. This table contains one entry per v4 interface table.
zxr10LdpV4IntfCfgEntry	1.3.6.1.4.1.3902.3.314.1.17.1		not-accessible	The parameter of a v4 interface entity.
U32 zxr10LdpV4IntfLdpInstNo	1.3.6.1.4.1.3902.3.314.1.17.1.1	Unsigned32	not-accessible	The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
STR zxr10LdpV4IntfName	1.3.6.1.4.1.3902.3.314.1.17.1.2	DisplayString	not-accessible	The name of the interface.
INT zxr10LdpV4IntfLblDistributeMode	1.3.6.1.4.1.3902.3.314.1.17.1.3	INTEGER	read-only	The distribution mode of the interface.
INT zxr10LdpV4IntfGtsm	1.3.6.1.4.1.3902.3.314.1.17.1.4	INTEGER	read-only	The gtsm of the interface.
zxr10LdpV6IntfCfgTable	1.3.6.1.4.1.3902.3.314.1.18		not-accessible	Ipv6 Ldp Interface Table. This table contains one entry per v6 interface table.
zxr10LdpV6IntfCfgEntry	1.3.6.1.4.1.3902.3.314.1.18.1		not-accessible	The parameter of a v6 interface entity.
U32 zxr10LdpV6IntfLdpInstNo	1.3.6.1.4.1.3902.3.314.1.18.1.1	Unsigned32	not-accessible	The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
STR zxr10LdpV6IntfName	1.3.6.1.4.1.3902.3.314.1.18.1.2	DisplayString	not-accessible	The name of the interface.
INT zxr10LdpV6IntfLblDistributeMode	1.3.6.1.4.1.3902.3.314.1.18.1.3	INTEGER	read-only	The distribution mode of the interface.
zxr10LdpGtsmTable	1.3.6.1.4.1.3902.3.314.1.19		not-accessible	Gtsm Table. This table contains one entry per gtsm table.
zxr10LdpGtsmEntry	1.3.6.1.4.1.3902.3.314.1.19.1		not-accessible	The parameter of a gtsm entity.
U32 zxr10LdpGtsmLdpInstNo	1.3.6.1.4.1.3902.3.314.1.19.1.1	Unsigned32	not-accessible	The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
IP zxr10LdpGtsmPeerLsrId	1.3.6.1.4.1.3902.3.314.1.19.1.2	IpAddress	not-accessible	The identifier of peer lsr used to identify a session.
U32 zxr10LdpGtsmHopCount	1.3.6.1.4.1.3902.3.314.1.19.1.3	Unsigned32	read-only	The gtsm hop count of the ldp hello.
zxr10LdpPeerBfdTable	1.3.6.1.4.1.3902.3.314.1.20		not-accessible	LDP Peer Bfd Table. This table contains one entry per peer bfd table.
zxr10LdpPeerBfdEntry	1.3.6.1.4.1.3902.3.314.1.20.1		not-accessible	The parameter of a peer bfd entity containing statistics information about a particular peer bfd.
U32 zxr10LdpPeerBfdLdpInstNo	1.3.6.1.4.1.3902.3.314.1.20.1.1	Unsigned32	not-accessible	The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
IP zxr10LdpPeerBfdRemoteLsrId	1.3.6.1.4.1.3902.3.314.1.20.1.2	IpAddress	not-accessible	The identifier of peer lsr used to identify a session.
INT zxr10LdpPeerBfdDelay	1.3.6.1.4.1.3902.3.314.1.20.1.3	INTEGER	read-only	If the value of this object is 1, then the Ldp Peer Bfd Creat Delay is enable, the default delay time is 60 seconds. IF the value of this object is 2, then the Ldp Peer Bfd Delay is disable, Set Ldp Peer Bfd immediately.
U32 zxr10LdpPeerBfdTime	1.3.6.1.4.1.3902.3.314.1.20.1.4	Unsigned32	read-only	Set delay time, the prerequisite is the value of zxr10LdpPeerBfdDelay is 1.
zxr10LdpV4DisAutoCfgIntTable	1.3.6.1.4.1.3902.3.314.1.21		not-accessible	Ldp Ipv4 Dis-auto-config Interface Table. This table contains one entry per v4 dis-auto-config interface table.
zxr10LdpV4DisAutoCfgIntEntry	1.3.6.1.4.1.3902.3.314.1.21.1		not-accessible	The parameter of a v4 dis-auto-config interface entity.
U32 zxr10LdpV4DisACIntfInstNo	1.3.6.1.4.1.3902.3.314.1.21.1.1	Unsigned32	not-accessible	The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
STR zxr10LdpV4DisACIntfName	1.3.6.1.4.1.3902.3.314.1.21.1.2	DisplayString	read-only	The name of the dis-auto-config interface.
zxr10LdpV6DisAutoCfgIntTable	1.3.6.1.4.1.3902.3.314.1.22		not-accessible	Ldp IPv6 Dis-auto-config Interface Table. This table contains one entry per V6 dis-auto-config interface table.
zxr10LdpV6DisAutoCfgIntEntry	1.3.6.1.4.1.3902.3.314.1.22.1		not-accessible	The parameter of a V6 dis-auto-config interface entity.
U32 zxr10LdpV6DisACIntfInstNo	1.3.6.1.4.1.3902.3.314.1.22.1.1	Unsigned32	not-accessible	The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
STR zxr10LdpV6DisACIntfName	1.3.6.1.4.1.3902.3.314.1.22.1.2	DisplayString	read-only	The name of the dis-auto-config interface.
zxr10LdpIgpSyncIntTable	1.3.6.1.4.1.3902.3.314.1.23		not-accessible	Ldp Enable Igp Synchronization Interface Table. This table contains one entry per igp sync interface table.
zxr10LdpIgpSyncIntEntry	1.3.6.1.4.1.3902.3.314.1.23.1		not-accessible	The parameter of a igp synchronization interface entity.
U32 zxr10LdpIgpSyncIntfInstNo	1.3.6.1.4.1.3902.3.314.1.23.1.1	Unsigned32	not-accessible	The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance
STR zxr10LdpIgpSyncIntfName	1.3.6.1.4.1.3902.3.314.1.23.1.2	DisplayString	read-only	The name of enable igp synchronization interface.

RFC description

MPLS Label Distribution Protocol management for ZTE/ZXR10 routers supporting label switching and IGP synchronization.

Start monitoring ZTE Corporation ZXR10 MPLS router platforms, LDP (FEC-to-label binding/LSP up-down-event status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-MPLS-LDP-MIB