All MIBs › ZTE-AN-MLD-MIB › zxAnMldBandwidthCtrlEnable
zxAnMldBandwidthCtrlEnable
Module: ZTE-AN-MLD-MIB
OID (symbolic): ZTE-AN-MLD-MIB::zxAnMldBandwidthCtrlEnable
OID (numeric): 1.3.6.1.4.1.3902.1082.60.2.2.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable/disable the multicast bandwidth control. enabled(1): the multicast traffic on the user port will be checked before user attempts to join a new multicast group. If the total multicast traffic on the user port has exceeded the configured rate of port, the user will not be allowed to join. disabled(2): the user may join any number of multicast groups eventhough the total multicast traffic on the user port has exceeded the configured rate of port.
What is zxAnMldBandwidthCtrlEnable?
This enables or disables multicast bandwidth control on subscriber ports: enabled means a join request is checked against the port's configured multicast bandwidth limit and rejected if it would be exceeded; disabled lets a user join regardless, defaulting to disabled. An admin enables this to enforce zxAnMldIfBandwidth limits and prevent one subscriber from oversubscribing shared multicast bandwidth.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.60.2.2.2.1.3 snmpwalk -v2c -c public <target> ZTE-AN-MLD-MIB::zxAnMldBandwidthCtrlEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.60.2.2.2.1.3.1 snmpget -v2c -c public <target> ZTE-AN-MLD-MIB::zxAnMldBandwidthCtrlEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.60.2.2.2.1.3.1 i <value>
Start monitoring ZTE Access Node (MLD snooping IPv6-multicast-group-membership status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-MLD-MIB::zxAnMldBandwidthCtrlEnable OID value, configure state conditions and alerts, and monitor any ZTE Access Node (MLD snooping IPv6-multicast-group-membership status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.60 | zxAnMulticast | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.60.2 | zxAnMldMib | ZTE-AN-MLD-MIB |
| 1.3.6.1.4.1.3902.1082.60.2.2 | zxAnMldObjects | ZTE-AN-MLD-MIB |
| 1.3.6.1.4.1.3902.1082.60.2.2.2 | zxAnMldMgmtObject | ZTE-AN-MLD-MIB |
| 1.3.6.1.4.1.3902.1082.60.2.2.2.1 | zxAnMldMgmtGlobalObject | ZTE-AN-MLD-MIB |
| 1.3.6.1.4.1.3902.1082.60.2.2.2.1.3 | zxAnMldBandwidthCtrlEnable | ZTE-AN-MLD-MIB |