| OID symbolic | OID numeric | Type | Access | Description |
|---|
| rip2 | 1.3.6.1.4.1.5504.4.1.2 | | | The MIB module to describe the RIP2 Version 2 Protocol
as represented in Zhone products. The notion of a
Routing Domain (RD) is used to group instances of RIP
within a system. |
| zhRip2GlobalTable | 1.3.6.1.4.1.5504.4.1.2.1 | | not-accessible | A list of global RIP values. Rows are created and
destroyed whenever a routing domain is created and
destroyed. Rows cannot be created or destroyed via SNMP. |
| zhRip2GlobalEntry | 1.3.6.1.4.1.5504.4.1.2.1.1 | | not-accessible | A single routing domain in a single subnet. |
| C32 zhRip2GlobalRouteChanges | 1.3.6.1.4.1.5504.4.1.2.1.1.1 | Counter32 | read-only | The number of route changes made to the IP Route
Database by RIP. This does not include the refresh
of a route's age. |
| C32 zhRip2GlobalQueries | 1.3.6.1.4.1.5504.4.1.2.1.1.2 | Counter32 | read-only | The number of responses sent to RIP queries
from other systems. |
| INT zhRip2GlobalAdminState | 1.3.6.1.4.1.5504.4.1.2.1.1.3 | INTEGER | read-write | An enumeration of the operational state of RIP for a RD.
The possible values are either 'disabled' or 'enabled',
where the operation of RIP is completely disabled or enabled
on all interfaces within a RD. The default is 'enabled'. |
| U32 zhRip2GlobalUpdateTime | 1.3.6.1.4.1.5504.4.1.2.1.1.4 | Unsigned32 | read-write | The time in seconds between transmissions of RIP updates
on all interfaces within a RD. The default is 30 seconds,
which follows RFC 1058 and subsequent RIP RFCs. |
| zhRip2IfStatTable | 1.3.6.1.4.1.5504.4.1.2.2 | | not-accessible | A list of subnets that require separate status monitoring
in RIP. Rows are created and destroyed whenever an interface
within the RD is created and destroyed. Rows cannot be
created or destroyed via SNMP. |
| zhRip2IfStatEntry | 1.3.6.1.4.1.5504.4.1.2.2.1 | | not-accessible | A single routing domain in a single subnet. |
| IP zhRip2IfStatAddress | 1.3.6.1.4.1.5504.4.1.2.2.1.1 | IpAddress | not-accessible | The IP Address of this system on the indicated
subnet. For unnumbered interfaces, a unique internal
identifier is used. |
| C32 zhRip2IfStatRcvBadPackets | 1.3.6.1.4.1.5504.4.1.2.2.1.2 | Counter32 | read-only | The number of RIP response packets received by
the RIP process that were subsequently discarded
for any reason (e.g. a version 0 packet, or an
unknown command type). |
| C32 zhRip2IfStatRcvBadRoutes | 1.3.6.1.4.1.5504.4.1.2.2.1.3 | Counter32 | read-only | The number of routes, in valid RIP packets,
that were ignored for any reason (e.g. unknown
address family, or invalid metric). |
| C32 zhRip2IfStatSentUpdates | 1.3.6.1.4.1.5504.4.1.2.2.1.4 | Counter32 | read-only | The number of triggered RIP updates actually
sent on this interface. This explicitly does
NOT include full updates sent containing new
information. |
| zhRip2IfConfTable | 1.3.6.1.4.1.5504.4.1.2.3 | | not-accessible | A list of subnets that require separate configuration in
RIP. Rows are created and destroyed whenever an interface
within the RD is created and destroyed. Rows cannot be
created or destroyed via SNMP. |
| zhRip2IfConfEntry | 1.3.6.1.4.1.5504.4.1.2.3.1 | | not-accessible | A single routing domain in a single subnet. |
| IP zhRip2IfConfAddress | 1.3.6.1.4.1.5504.4.1.2.3.1.1 | IpAddress | not-accessible | The IP Address of this system on the indicated
subnet. For unnumbered interfaces, a unique internal
identifier is used. |
| INT zhRip2IfConfAuthType | 1.3.6.1.4.1.5504.4.1.2.3.1.2 | INTEGER | read-write | The type of Authentication used when receiving RIP packets
on this interface. When set to 'noAuthentication', no
authentication is performed. For 'simplePassword', a
clear text password is used in zhRip2IfConfAuthKey.
When set to 'md5', an MD5 string is used in
zhRip2IfConfAuthKey (see RFC 1321). |
| RIP zhRip2IfConfAuthKey | 1.3.6.1.4.1.5504.4.1.2.3.1.3 | RipAuthKey | read-write | The value to be used as the Authentication Key
whenever the corresponding instance of
zhRip2IfConfAuthType has a value other than
noAuthentication. A modification of the corresponding
instance of zhRip2IfConfAuthType does not modify
the zhRip2IfConfAuthKey value. If a string shorter
than 16 octets is supplied, it will be left-
justified and padded to 16 octets, on the right,
with nulls (0x00).
Reading this object always results in an OCTET
STRING of length zero; authentication may not
be bypassed by reading the MIB object. |
| INT zhRip2IfConfSend | 1.3.6.1.4.1.5504.4.1.2.3.1.4 | INTEGER | read-write | What the router sends on this interface.
If set to 'doNotSend', no RIP updates are sent
out on this interface. If set to 'ripVersion1',
RIP updates compliant with RFC 1058 are sent.
'rip1Compatible' implies broadcasting RIP-2 updates
using RFC 1058 route subsumption rules. 'ripVersion2'
implies multicasting RIP-2 updates. 'ripV1Demand' indicates
the use of Demand RIP on a WAN interface under RIP
Version 1 rules. 'ripV2Demand' indicates the use of
Demand RIP on a WAN interface under Version 2 rules.
The default is 'rip1Compatible'. |
| INT zhRip2IfConfReceive | 1.3.6.1.4.1.5504.4.1.2.3.1.5 | INTEGER | read-write | This indicates which version of RIP updates are to be
accepted. When set to 'rip1', only RIP updates compliant
with RFC 1058 are received. 'rip2' specifies to receive
RIP updates compliant with RFC 1388 only. Setting
'rip1OrRip2' allows reception of RFC 1058 and RFC 1388
compliant RIP updates. If set to 'doNotReceive', the
intreface accepts no RIP updates. Note that 'rip2' and
'rip1OrRip2' implies reception of multicast packets.
The default is 'rip1OrRip2'. |
| INT zhRip2IfConfDefaultMetric | 1.3.6.1.4.1.5504.4.1.2.3.1.6 | INTEGER | read-write | This variable indicates the metric that is to
be used for the default route entry in RIP updates
originated on this interface. A value of zero
indicates that no default route should be
originated; in this case, a default route via
another router may be propagated. The default is
set using the metric in the received update. |
| IP zhRip2IfConfSrcAddress | 1.3.6.1.4.1.5504.4.1.2.3.1.7 | IpAddress | read-write | The IP Address this system will use as a source
address on this interface. If it is a numbered
interface, this MUST be the same value as ipIfAddr
(from ZHONE-IP-REC-MIB). On unnumbered interfaces,
it must be the value of ipIfAddr for some interface
on the system. |
| INT zhRip2IfConfStaticRouteAdvertisement | 1.3.6.1.4.1.5504.4.1.2.3.1.8 | INTEGER | read-write | This variable specifies whether to advertise static routes.
When set to 'none', no static routes are advertised. For
'low', only low preference static routes are advertised,
and when set to 'high' only high preference static routes
are advertised. 'both' specifies to advertise both low
and high preference static routes. Low preference routes
are default routes. The default value is 'none'. |
| INT zhRip2IfConfPoison | 1.3.6.1.4.1.5504.4.1.2.3.1.9 | INTEGER | read-write | This variable specifies whether to send poison reverse
updates on this interface. Poison reverse updates are
used to prevent larger loops within the network by
setting the metric (cost) of neighboring routes to
infinity. This will prevent two-hop loops.
By default, RIP uses a technique called split horizon
to avoid routing loops and allow smaller update packets.
Split horizon specifies that when a RIP update is sent
out a particular network interface, it should not
include routing information acquired over that same
interface. Poison Reverse is a variation of the split
horizon technique that specifies that all routes are
included in an update out a particular interface, but
that the metric is set to infinity for routes acquired
over that interface. One drawback is that routing update
packet sizes are increased when using poison reverse.
Setting the value of this object to 'disable' prevents
poison reverse updates, where 'enable' allows poison
updates to be sent on this interface. The default value
is 'disabled'. |
| zhRip2PeerTable | 1.3.6.1.4.1.5504.4.1.2.4 | | not-accessible | A list of RIP Peers. A row (new peer) is created whenever
an interface running RIP receives a RIP update from a new
peer. The row is destroyed when the interface has not
received a RIP update for more tha 180 seconds. Rows
cannot be created or destroyed via SNMP. |
| zhRip2PeerEntry | 1.3.6.1.4.1.5504.4.1.2.4.1 | | not-accessible | Information regarding a single routing peer. |
| IP zhRip2PeerAddress | 1.3.6.1.4.1.5504.4.1.2.4.1.1 | IpAddress | not-accessible | The IP Address that the peer is using as its source
address. Note that on an unnumbered link, this may
not be a member of any subnet on the system. |
| TIK zhRip2PeerLastUpdate | 1.3.6.1.4.1.5504.4.1.2.4.1.2 | TimeTicks | read-only | The value of sysUpTime when the most recent
RIP update was received from this system. |
| INT zhRip2PeerVersion | 1.3.6.1.4.1.5504.4.1.2.4.1.3 | INTEGER | read-only | The RIP version number in the header of the
last RIP packet received. |
| C32 zhRip2PeerRcvBadPackets | 1.3.6.1.4.1.5504.4.1.2.4.1.4 | Counter32 | read-only | The number of RIP response packets from this
peer discarded as invalid. |
| C32 zhRip2PeerRcvBadRoutes | 1.3.6.1.4.1.5504.4.1.2.4.1.5 | Counter32 | read-only | The number of routes from this peer that were
ignored because the entry format was invalid. |
| comIpRip2 | 1.3.6.1.4.1.5504.6.52 | | | RIPv2 MIB
IP Software
Minneapolis, MN |
