All MIBs › ZHONE-COM-BRIDGE-REC-MIB
Organization: Zhone Technologies, Inc.
Last Updated: 2014--1-1-
Category: Zhone Technologies CPE and Access
Description: Manages Zhone Technologies bridge record configuration for MAC learning and forwarding table entries.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZHONE-COM-BRIDGE-REC-MIB?
This Zhone Technologies enterprise MIB defines bridge record objects for MAC address learning and forwarding table management on Zhone broadband access equipment. It models bridging-related data such as learned MAC address entries, their associated ports/interfaces, and forwarding-table state, mirroring functionality found in standards BRIDGE-MIB implementations. Its monitoring use centers on the software state of the device's Layer 2 forwarding engine — confirming which MAC addresses have been learned on which ports and whether forwarding entries are current — useful for troubleshooting connectivity or MAC-flapping issues. It parallels the standard IETF BRIDGE-MIB (RFC 4188) concept of a forwarding database, though implemented as a Zhone-proprietary record structure. It is deployed on Zhone access/aggregation devices performing Ethernet bridging within DSL/PON or similar broadband access networks. Engineers can download the ZHONE-COM-BRIDGE-REC-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZHONE-COM-BRIDGE-REC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Zhone Technologies broadband access/bridging device
Monitoring Examples
No sample objects were available in this MIB source. In general, an administrator would poll the bridge forwarding record table to see which MAC addresses are currently learned against which port. Such a check would typically reveal a MAC address flapping between two ports, indicating a Layer 2 loop or a duplicate device on the network.
What Can Be Monitored
- learned MAC address entries
- MAC-to-port forwarding mappings
- bridge forwarding table state
This MIB depends on
Related MIBs
Imported Objects
From ATM-TC-MIB
| AtmVcIdentifier | |
| AtmVpIdentifier |
From IF-MIB
| InterfaceIndex | |
| ifAlias | OBJECT-TYPE |
| ifIndex | OBJECT-TYPE |
From RFC1213-MIB
| PhysAddress | |
| ifPhysAddress |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| MacAddress | |
| TEXTUAL-CONVENTION | |
| TruthValue |
From Zhone
| zhone | MODULE-IDENTITY |
| zhoneBridge | OBJECT-IDENTITY |
| zhoneModules | OBJECT-IDENTITY |
From Zhone-TC
| ZhoneAdminString | |
| ZhoneRowStatus |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| bridgeInterfaceGroup | 1.3.6.1.4.1.5504.4.7.1 | The bridge Interface Record object group. | ||
| bridgeInterfaceTable | 1.3.6.1.4.1.5504.4.7.2 | not-accessible | This table contains information required for the management of bridge interfaces. | |
| bridgeInterfaceEntry | 1.3.6.1.4.1.5504.4.7.2.1 | not-accessible | An entry exists for each bridge interface in the system. At a mininum the ifIndex must be present to create a row. | |
| OID bridgeIfVpi | 1.3.6.1.4.1.5504.4.7.2.1.1 | AtmVpIdentifier | read-create | If this bridge interface is on an ATM VC, the ATM VPI is specified here. If the bridge interface is not an ATM VC, this field is ignored. The VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. |
| OID bridgeIfVci | 1.3.6.1.4.1.5504.4.7.2.1.2 | AtmVcIdentifier | read-create | If this bridge interface is on an ATM VC, the ATM VCI is specified here. The range is 32...65535. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB. If the bridge interface is not an ATM VC, but for example an ethernet interface, this field should be set to 0. |
| I32 bridgeIfVlanId | 1.3.6.1.4.1.5504.4.7.2.1.3 | Integer32 | read-create | The Virtual LAN Id for VLAN Tag Insertion. |
| T/F bridgeIfStripAndInsert | 1.3.6.1.4.1.5504.4.7.2.1.4 | TruthValue | read-create | If true, enable VLAN Tagging. |
| T/F bridgeIfCustomARP | 1.3.6.1.4.1.5504.4.7.2.1.5 | TruthValue | read-create | If true, send ARP requests selectively or by flood. |
| T/F bridgeIfFilterBroadcast | 1.3.6.1.4.1.5504.4.7.2.1.6 | TruthValue | read-create | If true, discard non-ARP broadcast packets. |
| T/F bridgeIfLearnIp | 1.3.6.1.4.1.5504.4.7.2.1.7 | TruthValue | read-create | If true, snoop unicast packets to build ARP table. |
| T/F bridgeIfLearnUnicast | 1.3.6.1.4.1.5504.4.7.2.1.8 | TruthValue | read-create | If true, snoop unicast packets to build MAC paths. |
| I32 bridgeIfMaxUnicast | 1.3.6.1.4.1.5504.4.7.2.1.9 | Integer32 | read-create | Maximum number of unicast addresses for I/F. |
| T/F bridgeIfLearnMulticast | 1.3.6.1.4.1.5504.4.7.2.1.10 | TruthValue | read-create | If true, snoop multicast packets for IGMP joins/leaves. |
| T/F bridgeIfForwardToUnicast | 1.3.6.1.4.1.5504.4.7.2.1.11 | TruthValue | read-create | If true, attempt to forward via unicast MAC paths. |
| T/F bridgeIfForwardToMulticast | 1.3.6.1.4.1.5504.4.7.2.1.12 | TruthValue | read-create | If true, attempt to forward via multicast MAC paths. |
| T/F bridgeIfForwardToDefault | 1.3.6.1.4.1.5504.4.7.2.1.13 | TruthValue | read-create | If true, attempt to forward via VLAN default paths. |
| NUM bridgeLowerIfIndex | 1.3.6.1.4.1.5504.4.7.2.1.14 | InterfaceIndex | read-create | An entry exists for each bridge interface in the system. Only Ifindex and lower if index is needed to create a row. |
| ZHO bridgeIfRowStatus | 1.3.6.1.4.1.5504.4.7.2.1.15 | ZhoneRowStatus | read-create | This object is used to create and remove rows in the table. See bridgeInterfaceEntry description for minimum requirements. |
| T/F bridgeIfCustomDHCP | 1.3.6.1.4.1.5504.4.7.2.1.16 | TruthValue | read-create | If TRUE, forwards broadcast DHCPOFFER or DHCPACK packets even if bridgeFilterBroadcast is TRUE for that interface. |
| PAC bridgeIfIngressPacketRuleGroupIndex | 1.3.6.1.4.1.5504.4.7.2.1.17 | PacketRuleGroupIndex | read-create | Index used as partial address of a group of entries in the packetRuleTable, each of which prescribes a filtering condition for the ingress interface. |
| I32 bridgeIfVlanIdCOS | 1.3.6.1.4.1.5504.4.7.2.1.18 | Integer32 | read-create | The Class-Of-Service (COS) value used for VLAN Tag Insertion. |
| INT bridgeIfOutgoingCOSOption | 1.3.6.1.4.1.5504.4.7.2.1.19 | INTEGER | read-create | Determines COS setting on packets bridged out this interface. disable - COS setting is untouched. all - COS will be set to bridgeIfOutgoingCOSValue. |
| I32 bridgeIfOutgoingCOSValue | 1.3.6.1.4.1.5504.4.7.2.1.20 | Integer32 | read-create | The COS value loaded into outgoing tagged packets. Applicable only if interface sends tagged packets and bridgeIfOutgoingCOSOption is outgoingCOSOption_all. |
| I32 bridgeIfStagTPID | 1.3.6.1.4.1.5504.4.7.2.1.21 | Integer32 | read-create | The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default.) |
| I32 bridgeIfStagId | 1.3.6.1.4.1.5504.4.7.2.1.22 | Integer32 | read-create | The s-tag value that we are expecting to put on packets that are Rxed on this interface. |
| T/F bridgeIfStagStripAndInsert | 1.3.6.1.4.1.5504.4.7.2.1.23 | TruthValue | read-create | If true, enable S-tag tagging on this IF. |
| INT bridgeIfStagOutgoingCOSOption | 1.3.6.1.4.1.5504.4.7.2.1.24 | INTEGER | read-create | Determines s-tag COS settings on packets bridged out this interface: disable - s-tag COS setting just passed as Rxed. all - s-tag COS will be set with s_tagOutgoingCOSValue. |
| I32 bridgeIfStagCOS | 1.3.6.1.4.1.5504.4.7.2.1.25 | Integer32 | read-create | The s-tag COS to be used when doing s-tag insertion. |
| I32 bridgeIfStagOutgoingCOSValue | 1.3.6.1.4.1.5504.4.7.2.1.26 | Integer32 | read-create | The s-tag COS value loaded into outgoing tagged packets. Applicaple only if interface sends S-tagged packets and s_tagOutgoingCOSOption is All. |
| STR bridgeIfMcastControlList | 1.3.6.1.4.1.5504.4.7.2.1.27 | SnmpAdminString | read-create | List of mcast-control-ids this bridge-interface-record is associated with. It is an integer stored as string, and controls which channels a user can watch. Note: unlike for IP, an empty list here allows user to watch all channels. |
| U32 bridgeIfMaxVideoStreams | 1.3.6.1.4.1.5504.4.7.2.1.28 | Unsigned32 | read-create | Maximum number of multicast (video) streams that we will support. |
| T/F bridgeIfIsPPPoA | 1.3.6.1.4.1.5504.4.7.2.1.29 | TruthValue | read-create | If true, this interface accepts PPPoA packets and will bridge them out as PPPoE packets. |
| T/F bridgeIfFloodUnknown | 1.3.6.1.4.1.5504.4.7.2.1.30 | TruthValue | read-create | If true, flood frames with unknown unicast MAC address that would otherwise be discarded. |
| T/F bridgeIfFloodMulticast | 1.3.6.1.4.1.5504.4.7.2.1.31 | TruthValue | read-create | If true, flood all multicast traffic received on this bridge to all other ports on this vlan. |
| PAC bridgeIfEgressPacketRuleGroupIndex | 1.3.6.1.4.1.5504.4.7.2.1.32 | PacketRuleGroupIndex | read-create | Index used as partial address of a group of entries in the packetRuleTable, each of which prescribes a filtering condition for the egress interface. |
| BIT bridgeIfTableBasedFilter | 1.3.6.1.4.1.5504.4.7.2.1.33 | Bits | read-create | none : Dynamic IP Filtering on bridge based on DHCP, is disabled. BIT 1(mac) : MAC address based Filtering based on DHCP, is enabled. BIT 2(ip) : IP address based dynamic IP Filtering based on DHCP, is enabled. Defval is changed to correct the Zhone script errors. |
| BIT bridgeIfDhcpLearn | 1.3.6.1.4.1.5504.4.7.2.1.34 | Bits | read-create | none :IP address and Mac address are not learned from DHCP packets. BIT 1 (mac): MAC addresses are learned from DHCP packets. ip 2 (ip) : IP addresses are learned from DHCP packets. The Defval is changed to correct the Zhone script errors. |
| INT bridgeIfOnDemandStatsEnabled | 1.3.6.1.4.1.5504.4.7.2.1.35 | INTEGER | read-create | If true, the on-demand stats collection for this bridge interface will be enabled and packets will be counted. If bytes, the on-demand stats collection for this bridge interface will be enabled and abd bytes will be counted. |
| I32 bridgeIfMvrVlan | 1.3.6.1.4.1.5504.4.7.2.1.36 | Integer32 | read-create | The Multicast Vlan Registration (MVR) vlan ID. Multicast video packets with this vlan can be vlan translated out this bridge. |
| I32 bridgeIfVlanXlateFrom | 1.3.6.1.4.1.5504.4.7.2.1.37 | Integer32 | read-create | If a packet's VLAN ID value matches this object's value then the packet's VLAN ID will be translated to the value of bridgeIfVlanId. A zero value disables translation. |
| I32 bridgeIfSlanXlateFrom | 1.3.6.1.4.1.5504.4.7.2.1.38 | Integer32 | read-create | If a packet's SLAN ID value matches this object's value then the packet's SLAN ID will be translated to the value of bridgeIfStagId. A zero value disables translation. |
| BRI bridgeIfBridgeState | 1.3.6.1.4.1.5504.4.7.2.1.39 | BridgeState | read-create | Values: up(1), UP down(2), DWN trouble(3), TRB notAvailable(4), NA initializing(5), INI adminDown(6), ADN adminStateTest(7), TST adminStateNone(8), N/S ready(9), RDY discovering(10), DSC unknown(11), ??? blocked(12), BLK pending(13), PND disabled(14), DIS learning(15), LRN forwarding(16), FWD blockedFlapping(17), BLF blockedPersistent(18), BLP blockedFlappingPersistenr(19), BFP |
| T/F bridgeIfUnblock | 1.3.6.1.4.1.5504.4.7.2.1.40 | TruthValue | read-write | Set to TRUE to unblock a bridge that is blocked due to flapping. |
| INT bridgeType | 1.3.6.1.4.1.5504.4.7.2.1.41 | INTEGER | read-create | bridge type |
| U32 bridgeIfGponGemPortId | 1.3.6.1.4.1.5504.4.7.2.1.42 | Unsigned32 | read-write | GPON GEM Port ID used only to create a bridge on a GPON ONU. |
| U32 bridgeIfGponTrafficProfile | 1.3.6.1.4.1.5504.4.7.2.1.43 | Unsigned32 | read-write | GPON Traffic Profile Index used only to create a bridge on a GPON ONU. |
| INT bridgeIfIncomingCOSOption | 1.3.6.1.4.1.5504.4.7.2.1.44 | INTEGER | read-write | Determines COS settings on incoming packets bridged out this interface: disable - COS replcement feature is disabled all - COS will be set with vlanIDCOS. |
| INT bridgeIfStagIncomingCOSOption | 1.3.6.1.4.1.5504.4.7.2.1.45 | INTEGER | read-write | Determines s-tag COS settings on incoming packets bridged out this interface: disable - s-tag COS setting just passed as Rxed. all - s-tag COS will be set with s-tagIdCOS. |
| staticBridgeTable | 1.3.6.1.4.1.5504.4.7.3 | not-accessible | A collection of staticBridgeEntries. | |
| staticBridgeEntry | 1.3.6.1.4.1.5504.4.7.3.1 | not-accessible | Static Bridge entries are created by the user in order to specify forwarding for a particular interface, vlanId, mac address or ip address, slanId (for QinQ). The INDEX value for staticBridgeEntry consists of following 5 values: ifIndex staticBridgeAddressType bridgeIfVlanId staticBridgeMacOrIpAddress bridgeIfStagId If staticBridgeAddressType is set to macAddr(1), then staticBridgeMacOrIpAddress represents a MAC Address, and ifIndex, bridgeIfVlanId and staticBridgeMacOrIpAddress are used for the bridge path. If staticBridgeAddressType is set to ipAddr(2), then staticBridgeMacOrIpAddress represents an IP Address, and ifIndex, bridgeIfVlanId and staticBridgeMacOrIpAddress are used for the bridge path. If staticBridgeAddressType is set to vlanIdAddr(3), then ifIndex and bridgeIfVlanId are used for the bridge path. If staticBridgeAddressType is set to globalAddr(4), then ifIndex is used for the bridge path. | |
| PHY staticBridgeMacOrIpAddress | 1.3.6.1.4.1.5504.4.7.3.1.1 | PhysAddress | not-accessible | If the staticBridgeAddressType is set to macAddr(1), then this field represents a MAC address. If the staticBridgeAddressType is set to ipAddr(2), then this field represents an IP address. |
| INT staticBridgeAddressType | 1.3.6.1.4.1.5504.4.7.3.1.2 | INTEGER | not-accessible | If staticBridgeAddressType is set to macAddr(1), then staticBridgeMacOrIpAddress represents a MAC Address, and ifIndex, bridgeIfVlanId and staticBridgeMacOrIpAddress are used for the bridge path. If staticBridgeAddressType is set to ipAddr(2), then staticBridgeMacOrIpAddress represents an IP Address, and ifIndex, bridgeIfVlanId and staticBridgeMacOrIpAddress are used for the bridge path. If staticBridgeAddressType is set to vlanIdAddr(3) or intralinkAddr(7), then ifIndex and bridgeIfVlanId are used for the bridge path. If staticBridgeAddressType is set to globalAddr(4), globalIntralinkAddr(8), or mvrAddr(13) then ifIndex is used for the bridge path. If staticBridgeAddressType is set to dhcpAllowOui( 720901) then the first 3 bytes of the MAC address contains the OUI that we will allow DHCP addresses to be granted to, global scope. If staticBridgeAddressType is set to dhcpIpAddr(9), or to dhcpMacAddr(10), then the other fields are populated as for address types ipAddr and macAddr respectively, with the difference that these are secure entries, learned by snooping DHCP. If staticBridgeAddressType is set to vlanParms(14), then the static bridge entry holds parameters for the given VLAN and SLAN ID (for example, flap mode, unicast aging period, etc) and is not associated with any specific bridge, but with all bridges with the same VLAN/SLAN ID. For this reason, the IfIndex of this entry must be zero. If staticBridgeAddressType is set to secMvrAddr(15), then the static bridge entry holds parameters for a Secondary MVR path. The VLAN ID of this entry is the Secondary VLAN ID. |
| I32 staticBridgeMulticastAging | 1.3.6.1.4.1.5504.4.7.3.1.3 | Integer32 | read-create | Multicast Aging period in tenths of seconds for the specified VLAN. After the specified aging period is met, the VLAN address is deleted from the routing table. A value of 0 indicates that aging is turned off. Maximum value is 2147483647 tenths of seconds, which equates to approximately 2485.51 days. |
| ZHO staticBridgeRowStatus | 1.3.6.1.4.1.5504.4.7.3.1.4 | ZhoneRowStatus | read-create | Used to create, modify or delete an entry in this table. |
| INT staticBridgeFlapControl | 1.3.6.1.4.1.5504.4.7.3.1.5 | INTEGER | read-create | This object enables or disable Flap Control in the Bridge Filter Table. The value 'disable(2)' turns Flap Control mode off. The values 'enable(3)' or 'fast(4) turn flap control mode on. 'Enable(3)' applies a hold time of 60 secs before allowing addr/IP to be moved to a new port, while 'fast(4)' applies a hold time of 0 secs. A value of 'default(1)' indicates 'Don't Care' and defaults to a disable or enable set by another entry. |
| I32 staticBridgeUnicastAging | 1.3.6.1.4.1.5504.4.7.3.1.6 | Integer32 | read-create | Multicast Aging period in tenths of seconds for the specified VLAN. After the specified aging period is met, the VLAN address is deleted from the routing table. A value of 0 indicates that aging is turned off. Maximum value is 2147483647 tenths of seconds, which equates to approximately 2485.51 days. |
| I32 staticBridgeIgmpQueryInterval | 1.3.6.1.4.1.5504.4.7.3.1.7 | Integer32 | read-create | How often (in seconds) we as a bridge inject IGMP query values into the stream. |
| BIT staticBridgeFlags | 1.3.6.1.4.1.5504.4.7.3.1.8 | Bits | read-create | none : IGMP Snooping with Proxy reporting is disabled. BIT 0(igmpProcessJoinAndLeave) : igmpProcessJoinandLeave is enabled for IGMP packets. BIT 1(igmpRespondToQuery) : igmpRespondToQuery is enabled for IGMP packets. BIT 2(igmpUseBridgeIpAddress) : igmpUseBridgeIpAddress is enabled for IGMP packets. BIT 3(forceIGMPv2Down) : forceIGMPv2Down is enabled for subscriber side BIT 4(forceIGMPv2Up) : forceIGMPv2Up is enabled for uplink/network side |
| IP staticBridgeIgmpCustomIpAddress | 1.3.6.1.4.1.5504.4.7.3.1.9 | IpAddress | read-create | Allow the configuration of the source IP address for packets that we originate upstream when doing IGMP Porxy on a bridge. |
| INT staticBridgeLoopPrevention | 1.3.6.1.4.1.5504.4.7.3.1.10 | INTEGER | read-write | This field does the following options,'BlockAsym(1)' blocks a learning bridge if flap is detected between it and an uplink bridge. 'BlockAll(2)' incorporates 'blockAsym(1)' but it also blocks a learning bridge if it flaps against another learning bridge. |
| OCT staticBridgeIgmpDscp | 1.3.6.1.4.1.5504.4.7.3.1.11 | OCTET STRING | read-create | This parameter indicates DSCP value for igmp traffic. Valid code values: Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110) |
| bridgeIfLookupTable | 1.3.6.1.4.1.5504.4.7.4 | not-accessible | A collection of bridgeIfLookupTable entries. | |
| bridgeIfLookupEntry | 1.3.6.1.4.1.5504.4.7.4.1 | not-accessible | Bridge IfLookup entries are created by the user or learned by the software in order to specify forwarding for a particular interface, vlanId/slanId, mac address or ip address. The INDEX value for bridgeIfLookupEntry consists of following 5 values: bridgeIfAddressType bridgeIfMacOrIpAddress bridgeIfVlanId ifIndex bridgeIfStagId If bridgeIfAddressType is set to unicast_mac(1), then bridgeIfMacOrIpAddress represents a MAC Address, and ifIndex, bridgeIfVlanId/Slanid and bridgeIfMacOrIpAddress are use for the bridge path. If bridgeIfAddressType is set to multicast_mac(2), then bridgeMacOrIpAddress represents a MAC Address, and ifIndex, bridgeIfVlanId/SlanId and bridgeIfMacOrIpAddress are used for bridge path. If bridgeIfAddressType is set to ip_address(3), then ifIndex and bridgeIfVlanId/SlanId are used for the bridge path. | |
| INT bridgeIfAddressType | 1.3.6.1.4.1.5504.4.7.4.1.1 | INTEGER | not-accessible | If bridgeIfAddressType is set to unicast_mac(1), then bridgeIfMacOrIpAddress represents a MAC Address, and ifIndex, bridgeIfVlanId and bridgeIfMacOrIpAddress are used for the bridge path. If bridgeIfAddressType is set to multicast_mac(2), then bridgeMacOrIpAddress represents a MAC Address, and ifIndex, bridgeIfVlanId and bridgeIfMacOrIpAddress are used for the bridge path. If bridgeIfAddressType is set to ip_address(3), then ifIndex and bridgeIfVlanId are used for the bridge path. If bridgeIfAddressType is set to dhcp_mac(4), or dhcp_ip(5), then the address is as desribed for types 1 and 3, respectively, and the address was learned by snooping DHCP packets. ipV6Address(6) is the same as ipAddress(3) except for IPv6 address format. dhcpV6Mac(7) is the same as dhacpMac(4) except for IPv6 address format. dhcpV7Ip(8) is the same as dhcpIp(5) except for IPv6 address format. |
| PHY bridgeIfMacOrIpAddress | 1.3.6.1.4.1.5504.4.7.4.1.2 | PhysAddress | not-accessible | If bridgeIfAddressType is set to FILTER_ENTRY_UNICAST_MAC(1) or to FILTER_ENTRY_MULTICAST_MAC(2), or to FILTER_ENTRY_DHCP_MAC(4), then bridgeIfMacOrIpAddress represents a MAC Address. If bridgeIfAddressType is set to FILTER_ENTRY_IP_ADDRESS(3), or to FILTER_ENTRY_DHCP_IP(5), then bridgeIfMacOrIpAddress represents an IP Address. |
| INT bridgeIfLookupStaticOrDynamic | 1.3.6.1.4.1.5504.4.7.4.1.3 | INTEGER | read-only | If bridgeIfLookupStaticOrDynamic is set to 1, then this table entry is static and persistent. If bridgeIfLookupStaticOrDynamic is set to 2, then this table entry is learned and is not persistent. |
| T/F bridgeIfLookupFlush | 1.3.6.1.4.1.5504.4.7.4.1.4 | TruthValue | read-write | The object 'bridgeIfLookupFlush' allows a user to flush learned entries in the bridgeFilterTable when the ifIndex of the entry is not known. A combination of address type, MAC or IP address and vlan ID is used to determine the ifIndex of the entry to be removed. Setting the object to 'true' causes the flush action to occur. After the flush action is taken, the value of bridgeIfLookupFlush is immediately set back to 'false'. |
| bridgeAddressLookupTable | 1.3.6.1.4.1.5504.4.7.5 | not-accessible | A collection of bridgeAddressLookupTable entries. | |
| bridgeAddressLookupEntry | 1.3.6.1.4.1.5504.4.7.5.1 | not-accessible | BridgeAddressLookup entries are created by the user or learned by the software in order to specify forwarding for a particular interface, vlanId/slanId, mac address or ip address. The INDEX value for bridgeIfLookupEntry consists of following 5 values: ifIndex bridgeIfAddressType bridgeIfMacOrIpAddress bridgeIfVlanId bridgeIfStagId | |
| INT bridgeAddressLookupStaticOrDynamic | 1.3.6.1.4.1.5504.4.7.5.1.1 | INTEGER | read-only | If bridgeAddressLookupStaticOrDynamic is set to 1, then this table entry is static and persistent. If bridgeAddressLookupStaticOrDynamic is set to 2, then this table entry is learned and is not persistent. |
| T/F bridgeAddressLookupFlush | 1.3.6.1.4.1.5504.4.7.5.1.2 | TruthValue | read-write | The object 'bridgeIfAddressFlush' allows a user to flush learned entries in the bridgeFilterTable when the ifIndex of the entry is known. The ifIndex is used to determine which interface is to be removed. Setting the object to 'true' causes the flush action to occur. After the flush action is taken, the value of bridgeIfLookupFlush is immediately set back to 'false'. |
| packetRuleGroup | 1.3.6.1.4.1.5504.4.7.6 | |||
| PAC packetRuleGroupIndexNext | 1.3.6.1.4.1.5504.4.7.6.1 | PacketRuleGroupIndex | read-only | A scalar representing the next available Group Index for Packet Rule Table Entries. |
| packetRuleGroupNextIndexTable | 1.3.6.1.4.1.5504.4.7.6.2 | not-accessible | A collection of entries each representing the next available index for that group. | |
| packetRuleGroupNextIndexEntry | 1.3.6.1.4.1.5504.4.7.6.2.1 | not-accessible | A packetRuleGroupNextIndexEntry contains the next available index for that packetRuleGroup. | |
| PAC packetRuleGroupMemberNextIndex | 1.3.6.1.4.1.5504.4.7.6.2.1.1 | PacketRuleGroupIndex | read-only | The next index available in a given packetRuleGroup for a new packetRuleEntry. |
| packetRuleTable | 1.3.6.1.4.1.5504.4.7.6.3 | not-accessible | A collection of packetRuleEntries. | |
| packetRuleEntry | 1.3.6.1.4.1.5504.4.7.6.3.1 | not-accessible | Packet Rule entries are created by the user in order to specify filtering or other packet manipulation for a particular interface. | |
| I32 packetRuleGroupMemberIndex | 1.3.6.1.4.1.5504.4.7.6.3.1.1 | Integer32 | not-accessible | The index of a packetRuleEntry in a given packetRuleGroup. |
| INT packetRuleType | 1.3.6.1.4.1.5504.4.7.6.3.1.2 | INTEGER | read-create | A 32-bit value which determines a filter to be applied to packets on the interface matching the pattern specified in packetRuleValue. The size and offset of the pattern in the packet will depend on packetRuleType. Bits may be set in packetRuleType determining properties of the filtering to be applied: BRIDGE_FORBID = 0x10 BRIDGE_INPUT = 0x20 BRIDGE_TERMINATE = 0x40 When BRIDGE_FORBID is set, packets matching the pattern are dropped; when it is clear, matching packets are forwarded. When BRIDGE_INPUT is set, filtering is applied to packets received on the interface; when it is clear, filtering is applied to packets to be transmitted on the interface. When BRIDGE_TERMINATE is set, processing of a packet matching the pattern ends the scan of filtering specifications; when it is clear, processing continues. Values of packetRuleType include DST_MAC_SWAP_STATIC = 0x25 DST_MAC_SWAP_DYNAMIC = 0x28 BRIDGE_INSERT_OPTION82 = 0x61 BRIDGE_DHCP_RELAY = 0x62 BRIDGE_INSERT_PPPOE_VENDOR_TAG = 0x63 BRIDGE_FORBID_OUI = 0x72 RATE_LIMIT_DISCARD = 0x64 COLOR_AWARE_RATE_LIMIT_DISCARD = 0x67 |
| STR packetRuleValue | 1.3.6.1.4.1.5504.4.7.6.3.1.3 | SnmpAdminString | read-create | A variable-length field whose meaning depends on packetRuleType. If bridgeForbidOui, it specifies a bit pattern to be matched in a packet, stored as a string, but specified in the pattern 'nn:nn:nn...nn:nn', where 'nn' is a hex number specifying a byte of the pattern. E.g. a packetRuleValue of '00:02:02' specifies the OUI to be dropped. If dhcpRelay, it is ascii integer which specifies dhcp subnet group. If bridgeInsertOption82, this value is ignored. If bridgeInsertPPPoEVendorTag, it specifies an ASCII string of up to 48 bytes to be inserted into PPPoE discovery packets (PADI/PADR) which transit this node. String will be inserted as a Vendor-Specific tag. If rateLimitDiscard, this value represents a maximum rate (in kbps). If aclAllow/aclDeny, a text string of the form: all | [Keyword NamedValue | Value[/N]]* where Keyword identifies the field of interest, Value is context dependent on the field, NamedValue is an alias for a Value. N indicates the number of most significant bits of Value to test. If omitted it defaults to the max allowed for the field. |
| ZHO packetRuleRowStatus | 1.3.6.1.4.1.5504.4.7.6.3.1.4 | ZhoneRowStatus | read-create | This object is used to create and remove rows in the table. |
| STR packetRuleValue2 | 1.3.6.1.4.1.5504.4.7.6.3.1.5 | SnmpAdminString | read-create | A variable-length field whose meaning depends on packetRuleType. |
| STR packetRuleValue3 | 1.3.6.1.4.1.5504.4.7.6.3.1.6 | SnmpAdminString | read-create | A variable-length field whose meaning depends on packetRuleType. |
| STR packetRuleValue4 | 1.3.6.1.4.1.5504.4.7.6.3.1.7 | SnmpAdminString | read-create | A variable-length field whose meaning depends on packetRuleType. |
| STR packetRuleValue5 | 1.3.6.1.4.1.5504.4.7.6.3.1.8 | SnmpAdminString | read-create | A variable-length field whose meaning depends on packetRuleType. |
| PAC packetRuleGroupIndex | 1.3.6.1.4.1.5504.4.7.6.3.1.9 | PacketRuleGroupIndex | not-accessible | A scalar representing the Group Index for a set of Packet Rule Table Entries. |
| STR packetRuleValue6 | 1.3.6.1.4.1.5504.4.7.6.3.1.10 | SnmpAdminString | read-create | A variable-length field whose meaning depends on packetRuleType. |
| STR packetRuleValue7 | 1.3.6.1.4.1.5504.4.7.6.3.1.11 | SnmpAdminString | read-create | A variable-length field whose meaning depends on packetRuleType. |
| bridgePPPoETable | 1.3.6.1.4.1.5504.4.7.7 | not-accessible | For PPPoA-to-PPPoE tables, provide a lookup by ifIndex into the PPPoE tables. If the session has not been created for this PPPoA ifIndex, then there will be no table data. | |
| bridgePPPoEEntry | 1.3.6.1.4.1.5504.4.7.7.1 | not-accessible | Description. | |
| OCT bridgePPPoEBrasMac | 1.3.6.1.4.1.5504.4.7.7.1.1 | OCTET STRING | read-only | Destination mac address. |
| OCT bridgePPPoELocalHostMac | 1.3.6.1.4.1.5504.4.7.7.1.2 | OCTET STRING | read-only | Source mac address. |
| NUM bridgePPPoEEIfIndex | 1.3.6.1.4.1.5504.4.7.7.1.3 | InterfaceIndex | read-only | PPPoE port's ifIndex. |
| I32 bridgePPPoESessionID | 1.3.6.1.4.1.5504.4.7.7.1.4 | Integer32 | read-only | PPPoE session ID. |
| I32 bridgePPPoESlanId | 1.3.6.1.4.1.5504.4.7.7.1.5 | Integer32 | read-only | SLan ID of BRAS. |
| I32 bridgePPPoEVlanId | 1.3.6.1.4.1.5504.4.7.7.1.6 | Integer32 | read-only | VLAN ID of BRAS. |
| INT bridgePPPoEEncapLLC | 1.3.6.1.4.1.5504.4.7.7.1.7 | INTEGER | read-only | PPPoA encapsulation |
| stpParam | 1.3.6.1.4.1.5504.4.7.8 | |||
| STR stpParamName | 1.3.6.1.4.1.5504.4.7.8.1 | ZhoneAdminString | read-write | set this field if you are using MSTP, use the name of the bridge as a key. |
| U32 stpParamRevision | 1.3.6.1.4.1.5504.4.7.8.2 | Unsigned32 | read-write | This parameter is used if you are running MSTP only. Currently we don't support any revisions to MSTP, so revision 0 is default. |
| U32 stpParamBridgePriority | 1.3.6.1.4.1.5504.4.7.8.3 | Unsigned32 | read-write | The priority ID that will be advertised for this bridge. |
| U32 stpParamForceVersion | 1.3.6.1.4.1.5504.4.7.8.4 | Unsigned32 | read-write | The protocol to initiate with. 3- MSTP, 2- RSTP, 0- STP. |
| U32 stpParamFwdDelay | 1.3.6.1.4.1.5504.4.7.8.5 | Unsigned32 | read-write | The delay used by STP bridges to transition Root and Designated Ports to Forwarding. |
| U32 stpParamHelloTime | 1.3.6.1.4.1.5504.4.7.8.6 | Unsigned32 | read-write | The interval between periodic transmissions of Configuration Messages by Designated Ports. We only support a hello time of 2 currently. |
| U32 stpParamMigrateTime | 1.3.6.1.4.1.5504.4.7.8.7 | Unsigned32 | read-write | The initial value of the mdelayWhile and edgeDelayWhile timers. We currently only support a value of 3 for this timer. |
| U32 stpParamTxHoldCount | 1.3.6.1.4.1.5504.4.7.8.8 | Unsigned32 | read-write | The transmit hold count is used by the Port Transmit state machine to limit transmission rate. |
| U32 stpParamMaxAge | 1.3.6.1.4.1.5504.4.7.8.9 | Unsigned32 | read-write | The maximum age of the information transmitted by the bridge when it is the Root Bridge. |
| stpBindTable | 1.3.6.1.4.1.5504.4.7.9 | not-accessible | The stpBind table is used to store the entries of stpBind which hold the relationship between the ifIndex on which STP is to run on, and the MSTP instance if any. | |
| stpBindEntry | 1.3.6.1.4.1.5504.4.7.9.1 | not-accessible | stpBindEntry is used to specify the type of STP that is to run on an ifIndex. An InstanceID of 0 specifies RSTP. An InstanceId > 0 indicates MSTP. | |
| U32 stpBindInstanceID | 1.3.6.1.4.1.5504.4.7.9.1.1 | Unsigned32 | not-accessible | This is a hidden storage of the InstanceId of an entry. |
| ZHO stpBindRowStatus | 1.3.6.1.4.1.5504.4.7.9.1.2 | ZhoneRowStatus | read-create | Description. |
| U32 stpBindPortPriority | 1.3.6.1.4.1.5504.4.7.9.1.3 | Unsigned32 | read-create | PortPriority is used to specify the STP priority of this port. |
| mstpInstanceTable | 1.3.6.1.4.1.5504.4.7.10 | not-accessible | Description. | |
| mstpInstanceEntry | 1.3.6.1.4.1.5504.4.7.10.1 | not-accessible | Description. | |
| ZHO mstpInstanceRowStatus | 1.3.6.1.4.1.5504.4.7.10.1.1 | ZhoneRowStatus | read-create | Description. |
| STR mstpInstanceName | 1.3.6.1.4.1.5504.4.7.10.1.2 | ZhoneAdminString | read-create | A name for this mstp instance and vlanId. |
| bridgeStatsTable | 1.3.6.1.4.1.5504.4.7.11 | not-accessible | The bridgeStatsTable is used to access the statistics of the entries in the bridge table. | |
| bridgeStatsEntry | 1.3.6.1.4.1.5504.4.7.11.1 | not-accessible | Displays the bridge statistics table entries. | |
| U32 bridgeStatsUcastRcvd | 1.3.6.1.4.1.5504.4.7.11.1.1 | Unsigned32 | read-only | Unicast packets received. |
| U32 bridgeStatsMcastRcvd | 1.3.6.1.4.1.5504.4.7.11.1.2 | Unsigned32 | read-only | Multicast packets received. |
| U32 bridgeStatsBcastRcvd | 1.3.6.1.4.1.5504.4.7.11.1.3 | Unsigned32 | read-only | Broadcast packets received. |
| U32 bridgeStatsUcastSent | 1.3.6.1.4.1.5504.4.7.11.1.4 | Unsigned32 | read-only | Unicast packets sent. |
| U32 bridgeStatsMcastSent | 1.3.6.1.4.1.5504.4.7.11.1.5 | Unsigned32 | read-only | Multicast packets sent. |
| U32 bridgeStatsBcastSent | 1.3.6.1.4.1.5504.4.7.11.1.6 | Unsigned32 | read-only | Broadcast packets sent. |
| U32 bridgeStatsErrorSent | 1.3.6.1.4.1.5504.4.7.11.1.7 | Unsigned32 | read-only | Error packets sent. |
| U32 bridgeOnDemandStatsRulesSupported | 1.3.6.1.4.1.5504.4.7.11.1.8 | Unsigned32 | read-only | Get the number of supported Ingress Stats available for a line card. |
| U32 bridgeOnDemandStatsRulesRemaining | 1.3.6.1.4.1.5504.4.7.11.1.9 | Unsigned32 | read-only | Get the number of remaining Ingress Stats available for a line card |
| U32 bridgeStatsBSDUcastBlocked | 1.3.6.1.4.1.5504.4.7.11.1.10 | Unsigned32 | read-only | Number of unicast packets dropped due to Bridge Packet Storm Detection threshold exceeded. |
| U32 bridgeStatsBSDMcastBlocked | 1.3.6.1.4.1.5504.4.7.11.1.11 | Unsigned32 | read-only | Number of multicast packets dropped due to Bridge Packet Storm Detection threshold exceeded. |
| U32 bridgeStatsBSDBcastBlocked | 1.3.6.1.4.1.5504.4.7.11.1.12 | Unsigned32 | read-only | Number of broadcast packets dropped due to Bridge Packet Storm Detection threshold exceeded. |
| U32 bridgeStatsBSDAlarmCount | 1.3.6.1.4.1.5504.4.7.11.1.13 | Unsigned32 | read-only | This counter reflects the number of times this interface has transitioned to the alarm state due to the Bridge Packet Storm Detection threshold being exceeded for a pre-defined number of seconds. |
| C64 bridgeStatsBytesRcvdCount | 1.3.6.1.4.1.5504.4.7.11.1.14 | Counter64 | read-only | This is a count of the number of bytes received. On-demand stats must be enabled for byte counters otherwise this counter is zero. |
| C64 bridgeStatsBytesSentCount | 1.3.6.1.4.1.5504.4.7.11.1.15 | Counter64 | read-only | This is a count of the number of bytes transmitted. On-demand stats must be enabled for byte counters otherwise this counter is zero. |
| C64 bridgeStatsTicksLastCleared | 1.3.6.1.4.1.5504.4.7.11.1.16 | Counter64 | read-only | Linecard tick value when bridge was last cleared. |
| C64 bridgeStatsTicksNow | 1.3.6.1.4.1.5504.4.7.11.1.17 | Counter64 | read-only | Linecard current tick value. |
| C64 bridgeStatsTicksPerSecond | 1.3.6.1.4.1.5504.4.7.11.1.18 | Counter64 | read-only | Linecard current tick value. |
| bridgeCmd | 1.3.6.1.4.1.5504.4.7.12 | |||
| INT bridgeCmdOperation | 1.3.6.1.4.1.5504.4.7.12.1 | INTEGER | read-write | Bridge command ID value. |
| BIT bridgeCmdFilterMask | 1.3.6.1.4.1.5504.4.7.12.2 | Bits | read-write | Bridge command filters bit mask. If a bridge filter is enabled then the associated bridge filter value must be included in the SNMP packet. If the bridge filter mask is all zeros then no filters will be applied and the bridge command will apply to all bridges in the system. |
| NUM bridgeCmdIfIndex | 1.3.6.1.4.1.5504.4.7.12.3 | InterfaceIndex | read-write | Bridge command 'ifIndex' filter value. If this object is included in the SNMP packet then the associated filter must be enabled in the bridge filter mask (bridgeCmdFilterMask). |
| INT bridgeCmdVlanId | 1.3.6.1.4.1.5504.4.7.12.5 | INTEGER | read-write | Bridge command 'VLAN' filter value. If this object is included in the SNMP packet then the associated filter must be enabled in the bridge filter mask (bridgeCmdFilterMask). |
| INT bridgeCmdSlanId | 1.3.6.1.4.1.5504.4.7.12.6 | INTEGER | read-write | Bridge command 'SLAN' filter value. If this object is included in the SNMP packet then the associated filter must be enabled in the bridge filter mask (bridgeCmdFilterMask). |
| INT bridgeCmdSlot | 1.3.6.1.4.1.5504.4.7.12.7 | INTEGER | read-write | Bridge command 'SLOT' filter value. If this object is included in the SNMP packet then the associated filter must be enabled in the bridge filter mask (bridgeCmdFilterMask). |
| INT bridgeCmdPort | 1.3.6.1.4.1.5504.4.7.12.8 | INTEGER | read-write | Bridge command 'PORT' filter value. This is the ifIndex of the linegroup on which the bridge is stacked If this object is included in the SNMP packet then the associated filter must be enabled in the bridge filter mask (bridgeCmdFilterMask). |
| IP bridgeCmdIpAddress | 1.3.6.1.4.1.5504.4.7.12.9 | IpAddress | read-write | Bridge command 'IP Address' filter value. If this object is included in the SNMP packet then the associated filter must be enabled in the bridge filter mask (bridgeCmdFilterMask). |
| MAC bridgeCmdMacAddress | 1.3.6.1.4.1.5504.4.7.12.10 | MacAddress | read-write | Bridge command 'MAC Address' filter value. If this object is included in the SNMP packet then the associated filter must be enabled in the bridge filter mask (bridgeCmdFilterMask). |
| eapsGroup | 1.3.6.1.4.1.5504.4.7.13 | |||
| eapsConfigTable | 1.3.6.1.4.1.5504.4.7.13.1 | not-accessible | This table contains information required for the management of EAPS domains. | |
| eapsConfigEntry | 1.3.6.1.4.1.5504.4.7.13.1.1 | not-accessible | An entry exists for each EAPS domain in the system. | |
| NUM eapsConfigPrimaryPortLineGroup | 1.3.6.1.4.1.5504.4.7.13.1.1.1 | InterfaceIndex | accessible-for-notify | This object contains the line group IfIndex of the Primary EAPS Port. |
| NUM eapsConfigSecondaryPortLineGroup | 1.3.6.1.4.1.5504.4.7.13.1.1.2 | InterfaceIndex | accessible-for-notify | This object contains the line group IfIndex of the Secondary EAPS Port. |
| I32 eapsConfigControlVlan | 1.3.6.1.4.1.5504.4.7.13.1.1.3 | Integer32 | accessible-for-notify | This object contains the VLAN ID of the control VLAN for this domain record. This is the VLAN ID used in EAPS control messages. |
| T/F eapsConfigIsMasterNode | 1.3.6.1.4.1.5504.4.7.13.1.1.4 | TruthValue | read-create | If this value is True, then this record describes a Master Node. Otherwise, it describes a Transit Node. |
| I32 eapsConfigControlVlanPriority | 1.3.6.1.4.1.5504.4.7.13.1.1.5 | Integer32 | read-create | This object contains the Priority of the Control Vlan. |
| STR eapsConfigDomainName | 1.3.6.1.4.1.5504.4.7.13.1.1.6 | ZhoneAdminString | read-create | This object contains the user assigned ASCII representation of the Domain Name for this record. This name must be unique device wide. |
| I32 eapsConfigMsgTxInterval | 1.3.6.1.4.1.5504.4.7.13.1.1.7 | Integer32 | read-create | This object contains the interval, in seconds, that a node sends Health Messages on the ring. |
| I32 eapsConfigTimeout | 1.3.6.1.4.1.5504.4.7.13.1.1.8 | Integer32 | read-create | On a Master Node, this object contains the timeout, in seconds, which the Master Node will report a Ring Fault if it does not receive a Health Message on the ring. On a Transit Node, this is the pre-forwarding delay timeout (also in seconds). |
| I32 eapsConfigMaxDroppedMessages | 1.3.6.1.4.1.5504.4.7.13.1.1.9 | Integer32 | read-create | On a Master Node, this object contains the number of contigious Health messages that may be dropped before the node declared a Ring Fault. This object is not used for a Transit node. |
| T/F eapsConfigSnmpTrap | 1.3.6.1.4.1.5504.4.7.13.1.1.10 | TruthValue | read-create | If this object is set to True, then this node will send SNMP Traps on Ring State transition. |
| T/F eapsConfigDomainEnable | 1.3.6.1.4.1.5504.4.7.13.1.1.11 | TruthValue | read-create | If this value is TRUE, the EAPS state machine will transition through the initialization process to the Health state. It will begin passing Control Messages and allow Protected VLAN data through the EAPS Domain. If this value is FALSE, the EAPS state machine will transition through the reset process to the Inactivate state. It will stop passing Control Messages and prohibit Protected VLAN data from being passed through the EAPS Domain. |
| ZHO eapsConfigRowStatus | 1.3.6.1.4.1.5504.4.7.13.1.1.12 | ZhoneRowStatus | read-create | This object is used to create and remove rows in the table. See eapsConfigEntry description for minimum requirements. |
| eapsProtectedVlanTable | 1.3.6.1.4.1.5504.4.7.13.2 | not-accessible | This table contains information required for the management of a list of protected VLAN's in an EAPS domains. | |
| eapsProtectedVlanEntry | 1.3.6.1.4.1.5504.4.7.13.2.1 | not-accessible | An entry for each VLAN ranges that is to be protected in the EAPS domain. | |
| I32 eapsProtectedVlanEntryIndex | 1.3.6.1.4.1.5504.4.7.13.2.1.1 | Integer32 | accessible-for-notify | This object is an index which indicates which entry in the Protected Vlan Table is being addressed. For example, a value of 5 would indicate that the 5th entry (row) of this table is being addressed. This entry, along with eapsConfigPrimaryLineGroup, eapsConfigSecondaryLineGroup, and eapsConfigControlVlan indices select which Protected Vlan Table entry for a given eaps-domain-record profile. The first three indices select the profile, this last index selects the N'th entry in that profile |
| I32 eapsProtectedVlanLowerRange | 1.3.6.1.4.1.5504.4.7.13.2.1.2 | Integer32 | read-create | The eapsProtectedVlanLowerRange and eapsProtectedVlanUpperRange objects work in conjunction with one another to set the range of the protected vlans. If eapsProtectedVlanLowerRange is 0, then this indicates end of list. If eapsProtectedVlanLowerRange is not 0, but eapsProtectedVlanUpperRange is 0, then this would be have the same effect as both object having the same value and protect a single vlan ID. If they are both different and non-zero, then it specifies an inclusive range. Note that eapsProtectedVlanLowerRange must be numerically lower than eapsProtectedVlanUpperRange. |
| I32 eapsProtectedVlanUpperRange | 1.3.6.1.4.1.5504.4.7.13.2.1.3 | Integer32 | read-create | The eapsProtectedVlanLowerRange and eapsProtectedVlanUpperRange objects work in conjunction with one another to set the range of the protected vlans. If eapsProtectedVlanLowerRange is 0, then this indicates end of list. If eapsProtectedVlanLowerRange is not 0, but eapsProtectedVlanUpperRange is 0, then this would be have the same effect as both object having the same value and protect a single vlan ID. If they are both different and non-zero, then it specifies an inclusive range. Note that eapsProtectedVlanLowerRange must be numerically lower than eapsProtectedVlanUpperRange. |
| ZHO eapsProtectedVlanRowStatus | 1.3.6.1.4.1.5504.4.7.13.2.1.4 | ZhoneRowStatus | read-create | This object is used to create and remove rows in the table. See eapsProtectedVlanEntry description for minimum requirements. |
| STR eapsProtectedVlanDomainName | 1.3.6.1.4.1.5504.4.7.13.2.1.5 | ZhoneAdminString | read-only | The domain name for the EAPS protected vlan entry. |
| eapsStatusTable | 1.3.6.1.4.1.5504.4.7.13.3 | not-accessible | This table contains status of each EAPS domain state machine. | |
| eapsStatusEntry | 1.3.6.1.4.1.5504.4.7.13.3.1 | not-accessible | The entry contains status of the domain's state machine. | |
| EAP eapsPrevState | 1.3.6.1.4.1.5504.4.7.13.3.1.1 | EapsState | read-only | Previous state for the domain. |
| EAP eapsState | 1.3.6.1.4.1.5504.4.7.13.3.1.2 | EapsState | read-only | Current state for the domain. |
| eapsStatsTable | 1.3.6.1.4.1.5504.4.7.13.4 | not-accessible | EAPS statistics table. | |
| eapsStatsEntry | 1.3.6.1.4.1.5504.4.7.13.4.1 | not-accessible | Displays the EAPS statistic table entries. | |
| I32 eapsStatsTotCtrlMsgSent | 1.3.6.1.4.1.5504.4.7.13.4.1.1 | Integer32 | read-write | Total EAPS control messages sent. |
| I32 eapsStatsTotCtrlMsgRecvd | 1.3.6.1.4.1.5504.4.7.13.4.1.2 | Integer32 | read-write | Total EAPS control messages received. |
| eapsTrapPrefix | 1.3.6.1.4.1.5504.4.7.13.5 | Place-holder object for EAPS traps, which must have a final digit of 0 in OID. | ||
| eapsTraps | 1.3.6.1.4.1.5504.4.7.13.5.0 | Traps raised by EAPS state machine. | ||
| NTF eapsStateChange | 1.3.6.1.4.1.5504.4.7.13.5.0.1 | State changed in the node for the EAPS domain. | ||
| NTF eapsFailTimerExpFlagSet | 1.3.6.1.4.1.5504.4.7.13.5.0.2 | The eapsFailTimerExpFlagSet notification is generated when the EAPS domain's fail timer expires for the first time, while its state is not in Fail state. | ||
| NTF eapsFailTimerExpFlagClear | 1.3.6.1.4.1.5504.4.7.13.5.0.3 | Description. | ||
| NTF eapsLinkDownRingComplete | 1.3.6.1.4.1.5504.4.7.13.5.0.4 | If a transit is in Link-Down state, and it receives a Health-Check-Pdu from the Master indicating the ring is Complete, it means there is some problem with the Transit switch that has issued this trap message. | ||
| eapsTopologyTable | 1.3.6.1.4.1.5504.4.7.13.6 | not-accessible | EAPS topology table. | |
| eapsTopologyEntry | 1.3.6.1.4.1.5504.4.7.13.6.1 | not-accessible | Displays the EAPS topology table entries. | |
| INT eapsTopologyRing | 1.3.6.1.4.1.5504.4.7.13.6.1.1 | INTEGER | not-accessible | This represents the link as primary or secondary. |
| I32 eapsTopologyRowNumber | 1.3.6.1.4.1.5504.4.7.13.6.1.2 | Integer32 | not-accessible | This represents the node number in the ring. |
| STR eapsTopologyDomainName | 1.3.6.1.4.1.5504.4.7.13.6.1.3 | ZhoneAdminString | read-only | This represents the domain name for this record. |
| MAC eapsTopologyMacAddr | 1.3.6.1.4.1.5504.4.7.13.6.1.4 | MacAddress | read-only | macAddress of the element in the ring. |
| IP eapsTopologyIpAddr | 1.3.6.1.4.1.5504.4.7.13.6.1.5 | IpAddress | read-only | Ip addressed of the element in the ring. |
| INT eapsTopologyType | 1.3.6.1.4.1.5504.4.7.13.6.1.6 | INTEGER | read-only | This represents whether the node is master or transit. |
| STR eapsTopologyPrimaryLinkName | 1.3.6.1.4.1.5504.4.7.13.6.1.7 | ZhoneAdminString | read-only | This represents the primary link name. |
| EAP eapsTopologyPrimaryLinkState | 1.3.6.1.4.1.5504.4.7.13.6.1.8 | EapsState | read-only | This represents the primary link state. |
| STR eapsTopologySecondaryLinkName | 1.3.6.1.4.1.5504.4.7.13.6.1.9 | ZhoneAdminString | read-only | This represents the secondary link name. |
| EAP eapsTopologySecondaryLinkState | 1.3.6.1.4.1.5504.4.7.13.6.1.10 | EapsState | read-only | This represents the secondary link state. |
| bridgeIgmpStatsTable | 1.3.6.1.4.1.5504.4.7.14 | not-accessible | The bridgeIgmpStatsTable is used to access the IGMP statistics for bridges. | |
| bridgeIgmpStatsEntry | 1.3.6.1.4.1.5504.4.7.14.1 | not-accessible | The bridgeIgmpStatsEntry holds IGMP stats for a bridge interface. | |
| U32 genQueryRx | 1.3.6.1.4.1.5504.4.7.14.1.1 | Unsigned32 | read-only | general IGMP queries received. |
| U32 genQueryTx | 1.3.6.1.4.1.5504.4.7.14.1.2 | Unsigned32 | read-only | general IGMP queries transmitted. |
| U32 specQueryRx | 1.3.6.1.4.1.5504.4.7.14.1.3 | Unsigned32 | read-only | Specific IGMP queries received. |
| U32 specQueryTx | 1.3.6.1.4.1.5504.4.7.14.1.4 | Unsigned32 | read-only | Specific IGMP queries transmitted. |
| U32 v2ReportsRx | 1.3.6.1.4.1.5504.4.7.14.1.5 | Unsigned32 | read-only | Version 2 reports received (JOINs). |
| U32 v2ReportsTx | 1.3.6.1.4.1.5504.4.7.14.1.6 | Unsigned32 | read-only | Version 2 reports sent. |
| U32 leavesRx | 1.3.6.1.4.1.5504.4.7.14.1.7 | Unsigned32 | read-only | IGMP leaves received. |
| U32 leavesTx | 1.3.6.1.4.1.5504.4.7.14.1.8 | Unsigned32 | read-only | IGMP leaves transmitted. |
| U32 unknownRx | 1.3.6.1.4.1.5504.4.7.14.1.9 | Unsigned32 | read-only | Unknown IGMP packets received. |
| U32 errorRx | 1.3.6.1.4.1.5504.4.7.14.1.10 | Unsigned32 | read-only | IGMP packet is bad received. |
| U32 actChans | 1.3.6.1.4.1.5504.4.7.14.1.11 | Unsigned32 | read-only | Number of active muticast channels. |
| U32 actHosts | 1.3.6.1.4.1.5504.4.7.14.1.12 | Unsigned32 | read-only | Number of active multicast hosts. |
| U32 v3GenQueryRx | 1.3.6.1.4.1.5504.4.7.14.1.13 | Unsigned32 | read-only | Number of IGMP V3 Queries received. |
| U32 v3GenQueryTx | 1.3.6.1.4.1.5504.4.7.14.1.14 | Unsigned32 | read-only | Number of IGMP V3 queries sent. |
| U32 v3SpecQueryRx | 1.3.6.1.4.1.5504.4.7.14.1.15 | Unsigned32 | read-only | Number of IGMP V3 specific queries received. |
| U32 v3SpecQueryTx | 1.3.6.1.4.1.5504.4.7.14.1.16 | Unsigned32 | read-only | Number of IGMP V3 specific queries sent. |
| U32 v3ReportsRx | 1.3.6.1.4.1.5504.4.7.14.1.17 | Unsigned32 | read-only | Number of IGMP V3 reports received. |
| U32 v3ReportsTx | 1.3.6.1.4.1.5504.4.7.14.1.18 | Unsigned32 | read-only | Number of IGMP V3 reports sent. |
| bridgeGroup | 1.3.6.1.4.1.5504.4.7.15 | |||
| bridgeTrapPrefix | 1.3.6.1.4.1.5504.4.7.15.1 | Traps raised for bridge conditions. | ||
| bridgeTraps | 1.3.6.1.4.1.5504.4.7.15.1.0 | Bridge traps go under here - extra layer needed to ensure '0' in OID. | ||
| NTF bridgeLoopDetection | 1.3.6.1.4.1.5504.4.7.15.1.0.1 | Trap when bridge is looping on flap. | ||
| NTF bridgeStormDetection | 1.3.6.1.4.1.5504.4.7.15.1.0.2 | Trap sent when a bridge packet storm is detected. | ||
| bridgeTrapObjects | 1.3.6.1.4.1.5504.4.7.16 | |||
| OCT bridgeMacAddrString | 1.3.6.1.4.1.5504.4.7.16.1 | OCTET STRING | accessible-for-notify | vlan/slan/macAddress for bridge |
| bridgeIgmpTable | 1.3.6.1.4.1.5504.4.7.17 | not-accessible | The bridgeIgmpTable is used to access the IGMP data for bridges for when IGMP is in proxy mode and the IGMP status must be obtained from the linecard. | |
| bridgeIgmpEntry | 1.3.6.1.4.1.5504.4.7.17.1 | not-accessible | BridgeIgmpEntry contains the igmp multicast data information for a bridge, indexed by ifIndex, hostMac, and mcastMac. | |
| I32 slanId | 1.3.6.1.4.1.5504.4.7.17.1.1 | Integer32 | read-only | IGMP slan identifier. Maximum value 4090 as defined by MAX_VLAN_NUM. |
| I32 vlanId | 1.3.6.1.4.1.5504.4.7.17.1.2 | Integer32 | read-only | IGMP vlan identifier. Maximum value 4090 as defined my MAX_VLAN_NUM |
| OCT mcastMac | 1.3.6.1.4.1.5504.4.7.17.1.3 | OCTET STRING | read-only | IGMP Multicast MAC addressed to bridge port. |
| IP mcastIP | 1.3.6.1.4.1.5504.4.7.17.1.4 | IpAddress | read-only | IGMP Multicast IP addressed to bridge port. |
| OCT hostMac | 1.3.6.1.4.1.5504.4.7.17.1.5 | OCTET STRING | read-only | MAC address of end device receiving multicast packets. |
| I32 lastJoinTimer | 1.3.6.1.4.1.5504.4.7.17.1.6 | Integer32 | read-only | Count down timer before IGMP entry ages out. |
| staticBridgePathTable | 1.3.6.1.4.1.5504.4.7.18 | not-accessible | A collection of staticBridgePathEntries. The StaticBridgePath OID has the following format: OID psn MAC entries IPv4 entries IPv6 entries ---------- ------------- -------------- -------------- tlist[0] ifIndex ifIndex ifIndex tlist[1] address type address type address type tlist[2] vlan vlan vlan tlist[3] macAddr[0] IPv4[0] IPv6[0] tlist[4] macAddr[1] IPv4[1] IPv6[1] tlist[5] macAddr[2] IPv4[2] IPv6[2] tlist[6] macAddr[3] IPv4[3] IPv6[3] tlist[7] macAddr[4] zero IPv6[4] tlist[8] macAddr[5] zero IPv6[5] tlist[9] zero zero IPv6[6] tlist[10] zero zero IPv6[7] tlist[11] zero zero IPv6[8] tlist[12] zero zero IPv6[9] tlist[13] zero zero IPv6[10] tlist[14] zero zero IPv6[11] tlist[15] zero zero IPv6[12] tlist[16] zero zero IPv6[13] tlist[17] zero zero IPv6[14] tlist[18] zero zero IPv6[15] tlist[19] slan slan slan | |
| staticBridgePathEntry | 1.3.6.1.4.1.5504.4.7.18.1 | not-accessible | Static Path Bridge entries are created by the user in order to specify forwarding for a particular interface, vlanId, mac address or ip address, slanId (for QinQ). The INDEX value for staticBridgePathEntry consists of following 5 values: ifIndex staticBridgePathAddressType bridgeIfVlanId staticBridgePathMacOrIpAddress bridgeIfStagId If staticBridgeAddressType is set to macAddr(1), then staticBridgeMacOrIpAddress represents a MAC Address, and ifIndex, bridgeIfVlanId and staticBridgeMacOrIpAddress are used for the bridge path. If staticBridgeAddressType is set to ipAddr(2), then staticBridgeMacOrIpAddress represents an IP Address, and ifIndex, bridgeIfVlanId and staticBridgeMacOrIpAddress are used for the bridge path. If staticBridgeAddressType is set to vlanIdAddr(3), then ifIndex and bridgeIfVlanId are used for the bridge path. If staticBridgeAddressType is set to globalAddr(4), then ifIndex is used for the bridge path. | |
| IP staticBridgePathMacOrIpAddress | 1.3.6.1.4.1.5504.4.7.18.1.1 | IpAddress | not-accessible | If the staticBridgeAddressType is set to macAddr(1), then this field represents a MAC address. If the staticBridgeAddressType is set to ipAddr(2), then this field represents an IP address. The IP address can be four octets ( for IPv4 ) or sixteen octets ( for IPv6 ). |
| INT staticBridgePathAddressType | 1.3.6.1.4.1.5504.4.7.18.1.2 | INTEGER | not-accessible | If staticBridgeIPv6AddressType is set to macAddr(1), then staticBridgeMacOrIpAddress represents a MAC Address, and ifIndex, bridgeIfVlanId and staticBridgeMacOrIpAddress are used for the bridge path. If staticBridgeIPv6AddressType is set to ipAddr(2), then staticBridgeMacOrIpAddress represents an IP Address, and ifIndex, bridgeIfVlanId and staticBridgeMacOrIpAddress are used for the bridge path. If staticBridgeIPv6AddressType is set to vlanIdAddr(3) or intralinkAddr(7), then ifIndex and bridgeIfVlanId are used for the bridge path. If staticBridgeIPv6AddressType is set to globalAddr(4), globalIntralinkAddr(8), or mvrAddr(13) then ifIndex is used for the bridge path. If staticBridgeIPv6AddressType is set to dhcpAllowOui( 720901) then the first 3 bytes of the MAC address contains the OUI that we will allow DHCP addresses to be granted to, global scope. If staticBridgeIPv6AddressType is set to dhcpIpAddr(9), or to dhcpMacAddr(10), then the other fields are populated as for address types ipAddr and macAddr respectively, with the difference that these are secure entries, learned by snooping DHCP. If staticBridgeIPv6AddressType is set to vlanParms(14), then the static bridge entry holds parameters for the given VLAN and SLAN ID (for example, flap mode, unicast aging period, etc) and is not associated with any specific bridge, but with all bridges with the same VLAN/SLAN ID. For this reason, the IfIndex of this entry must be zero. If staticBridgeIPv6AddressType is set to secMvrAddr(15), then the static bridge entry holds parameters for a Secondary MVR path. The VLAN ID of this entry is the Secondary VLAN ID. If staticBridgeIPv6AddressType is set to ipAddrV6(16), then staticBridgeMacOrIpAddress represents an IPv6 Address, and ifIndex, bridgeIfVlanId and staticBridgeIPv6MacOrIpAddress are used for the bridge path. If staticBridgeIPv6AddressType is set to dhcpIpAddrV6(17), or to dhcpMacAddr(10), then the other fields are populated as for address types ipAddr and macAddr respectively, with the difference that these are secure entries, learned by snooping DHCP. |
| I32 staticBridgePathMulticastAging | 1.3.6.1.4.1.5504.4.7.18.1.3 | Integer32 | read-create | Multicast Aging period in tenths of seconds for the specified VLAN. After the specified aging period is met, the VLAN address is deleted from the routing table. A value of 0 indicates that aging is turned off. Maximum value is 2147483647 tenths of seconds, which equates to approximately 2485.51 days. |
| ZHO staticBridgePathRowStatus | 1.3.6.1.4.1.5504.4.7.18.1.4 | ZhoneRowStatus | read-create | Used to create, modify or delete an entry in this table. |
| INT staticBridgePathFlapControl | 1.3.6.1.4.1.5504.4.7.18.1.5 | INTEGER | read-create | This object enables or disable Flap Control in the Bridge Filter Table. The value 'disable(2)' turns Flap Control mode off. The values 'enable(3)' or 'fast(4) turn flap control mode on. 'Enable(3)' applies a hold time of 60 secs before allowing addr/IP to be moved to a new port, while 'fast(4)' applies a hold time of 0 secs. A value of 'default(1)' indicates 'Don't Care' and defaults to a disable or enable set by another entry. |
| I32 staticBridgePathUnicastAging | 1.3.6.1.4.1.5504.4.7.18.1.6 | Integer32 | read-create | Multicast Aging period in tenths of seconds for the specified VLAN. After the specified aging period is met, the VLAN address is deleted from the routing table. A value of 0 indicates that aging is turned off. Maximum value is 2147483647 tenths of seconds, which equates to approximately 2485.51 days. |
| I32 staticBridgePathIgmpQueryInterval | 1.3.6.1.4.1.5504.4.7.18.1.7 | Integer32 | read-create | How often (in seconds) we as a bridge inject IGMP query values into the stream. |
| BIT staticBridgePathFlags | 1.3.6.1.4.1.5504.4.7.18.1.8 | Bits | read-create | none : IGMP Snooping with Proxy reporting is disabled. BIT 0(igmpProcessJoinAndLeave) : igmpProcessJoinandLeave is enabled for IGMP packets. BIT 1(igmpRespondToQuery) : igmpRespondToQuery is enabled for IGMP packets. BIT 2(igmpUseBridgeIpAddress) : igmpUseBridgeIpAddress is enabled for IGMP packets. |
| IP staticBridgePathIgmpCustomIpAddress | 1.3.6.1.4.1.5504.4.7.18.1.9 | IpAddress | read-create | Allow the configuration of the source IP address for packets that we originate upstream when doing IGMP Porxy on a bridge. |
| INT staticBridgePathLoopPrevention | 1.3.6.1.4.1.5504.4.7.18.1.10 | INTEGER | read-write | This field does the following options,'BlockAsym(1)' blocks a learning bridge if flap is detected between it and an uplink bridge. 'BlockAll(2)' incorporates 'blockAsym(1)' but it also blocks a learning bridge if it flaps against another learning bridge. |
| OCT staticBridgePathIgmpDscp | 1.3.6.1.4.1.5504.4.7.18.1.11 | OCTET STRING | read-create | This parameter indicates DSCP value for igmp traffic. Valid code values: Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110) |
| bridgePathIfLookupTable | 1.3.6.1.4.1.5504.4.7.19 | not-accessible | A collection of bridgePathIfLookupTable entries. The bridgePathIfLookup OID has the following format: OID psn MAC entries IPv4 entries IPv6 entries ---------- ------------- -------------- -------------- tlist[0] address type address type address type tlist[1] macAddr[0] IPv4[0] IPv6[0] tlist[2] macAddr[1] IPv4[1] IPv6[1] tlist[3] macAddr[2] IPv4[2] IPv6[2] tlist[4] macAddr[3] IPv4[3] IPv6[3] tlist[5] macAddr[4] zero IPv6[4] tlist[6] macAddr[5] zero IPv6[5] tlist[7] zero zero IPv6[6] tlist[8] zero zero IPv6[7] tlist[9] zero zero IPv6[8] tlist[10] zero zero IPv6[9] tlist[11] zero zero IPv6[10] tlist[12] zero zero IPv6[11] tlist[13] zero zero IPv6[12] tlist[14] zero zero IPv6[13] tlist[15] zero zero IPv6[14] tlist[16] zero zero IPv6[15] tlist[17] vlan vlan vlan tlist[18] ifIndex ifIndex ifIndex tlist[19] slan slan slan | |
| bridgePathIfLookupEntry | 1.3.6.1.4.1.5504.4.7.19.1 | not-accessible | Bridge IfLookup entries are created by the user or learned by the software in order to specify forwarding for a particular interface, vlanId/slanId, mac address or ip address. The INDEX value for bridgeIfLookupEntry consists of following 5 values: bridgeIfAddressType bridgeIfMacOrIpAddress bridgeIfVlanId ifIndex bridgeIfStagId If bridgeIfAddressType is set to unicast_mac(1), then bridgeIfMacOrIpAddress represents a MAC Address, and ifIndex, bridgeIfVlanId/Slanid and bridgeIfMacOrIpAddress are use for the bridge path. If bridgeIfAddressType is set to multicast_mac(2), then bridgeMacOrIpAddress represents a MAC Address, and ifIndex, bridgeIfVlanId/SlanId and bridgeIfMacOrIpAddress are used for bridge path. If bridgeIfAddressType is set to ip_address(3), then ifIndex and bridgeIfVlanId/SlanId are used for the bridge path. | |
| INT bridgePathIfAddressType | 1.3.6.1.4.1.5504.4.7.19.1.1 | INTEGER | not-accessible | If bridgeIfAddressType is set to unicast_mac(1), then bridgeIfMacOrIpAddress represents a MAC Address, and ifIndex, bridgeIfVlanId and bridgeIfMacOrIpAddress are used for the bridge path. If bridgeIfAddressType is set to multicast_mac(2), then bridgeMacOrIpAddress represents a MAC Address, and ifIndex, bridgeIfVlanId and bridgeIfMacOrIpAddress are used for the bridge path. If bridgeIfAddressType is set to ip_address(3), then ifIndex and bridgeIfVlanId are used for the bridge path. If bridgeIfAddressType is set to dhcp_mac(4), or dhcp_ip(5), then the address is as desribed for types 1 and 3, respectively, and the address was learned by snooping DHCP packets. |
| IP bridgePathIfMacOrIpAddress | 1.3.6.1.4.1.5504.4.7.19.1.2 | IpAddress | not-accessible | If bridgeIfAddressType is set to FILTER_ENTRY_UNICAST_MAC(1) or to FILTER_ENTRY_MULTICAST_MAC(2), or to FILTER_ENTRY_DHCP_MAC(4), then bridgeIfMacOrIpAddress represents a MAC Address. If bridgeIfAddressType is set to FILTER_ENTRY_IP_ADDRESS(3), or to FILTER_ENTRY_DHCP_IP(5), then bridgeIfMacOrIpAddress represents an IP Address. |
| INT bridgePathIfLookupStaticOrDynamic | 1.3.6.1.4.1.5504.4.7.19.1.3 | INTEGER | read-only | If bridgeIfLookupStaticOrDynamic is set to 1, then this table entry is static and persistent. If bridgeIfLookupStaticOrDynamic is set to 2, then this table entry is learned and is not persistent. |
| T/F bridgePathIfLookupFlush | 1.3.6.1.4.1.5504.4.7.19.1.4 | TruthValue | read-write | The object 'bridgeIfLookupFlush' allows a user to flush learned entries in the bridgeFilterTable when the ifIndex of the entry is not known. A combination of address type, MAC or IP address and vlan ID is used to determine the ifIndex of the entry to be removed. Setting the object to 'true' causes the flush action to occur. After the flush action is taken, the value of bridgeIfLookupFlush is immediately set back to 'false'. |
| bridgePathAddressLookupTable | 1.3.6.1.4.1.5504.4.7.20 | not-accessible | A collection of bridgePathAddressLookupTable entries. The bridgePathAddressLookup OID has the following format: OID psn MAC entries IPv4 entries IPv6 entries ---------- ------------- -------------- -------------- tlist[0] ifIndex ifIndex ifIndex tlist[1] address type address type address type tlist[2] macAddr[0] IPv4[0] IPv6[0] tlist[3] macAddr[1] IPv4[1] IPv6[1] tlist[4] macAddr[2] IPv4[2] IPv6[2] tlist[5] macAddr[3] IPv4[3] IPv6[3] tlist[6] macAddr[4] zero IPv6[4] tlist[7] macAddr[5] zero IPv6[5] tlist[8] zero zero IPv6[6] tlist[9] zero zero IPv6[7] tlist[10] zero zero IPv6[8] tlist[11] zero zero IPv6[9] tlist[12] zero zero IPv6[10] tlist[13] zero zero IPv6[11] tlist[14] zero zero IPv6[12] tlist[15] zero zero IPv6[13] tlist[16] zero zero IPv6[14] tlist[17] zero zero IPv6[15] tlist[18] vlan vlan vlan tlist[19] slan slan slan | |
| bridgePathAddressLookupEntry | 1.3.6.1.4.1.5504.4.7.20.1 | not-accessible | BridgePathAddressLookup entries are created by the user or learned by the software in order to specify forwarding for a particular interface, vlanId/slanId, mac address or ip address. The INDEX value for bridgePathLookupEntry consists of following 5 values: ifIndex bridgeIfAddressType bridgeIfMacOrIpAddress bridgeIfVlanId bridgeIfStagId | |
| INT bridgePathAddressLookupStaticOrDynamic | 1.3.6.1.4.1.5504.4.7.20.1.1 | INTEGER | read-only | If bridgePathAddressLookupStaticOrDynamic is set to 1, then this table entry is static and persistent. If bridgePathAddressLookupStaticOrDynamic is set to 2, then this table entry is learned and is not persistent. |
| T/F bridgePathAddressLookupFlush | 1.3.6.1.4.1.5504.4.7.20.1.2 | TruthValue | read-write | The object 'bridgePathAddressFlush' allows a user to flush learned entries in the bridgeFilterTable when the ifIndex of the entry is known. The ifIndex is used to determine which interface is to be removed. Setting the object to 'true' causes the flush action to occur. After the flush action is taken, the value of bridgePathLookupFlush is immediately set back to 'false'. |
| bridgeStatusTable | 1.3.6.1.4.1.5504.4.7.21 | not-accessible | This table contains runtime status for each bridge interface. | |
| bridgeStatusEntry | 1.3.6.1.4.1.5504.4.7.21.1 | not-accessible | Runtime status data for a single bridge. | |
| BRI bridgeStatusState | 1.3.6.1.4.1.5504.4.7.21.1.1 | BridgeState | read-only | Values: up(1), UP down(2), DWN trouble(3), TRB notAvailable(4), NA initializing(5), INI adminDown(6), ADN adminStateTest(7), TST adminStateNone(8), N/S ready(9), RDY discovering(10), DSC unknown(11), ??? blocked(12), BLK pending(13), PND disabled(14), DIS learning(15), LRN forwarding(16), FWD blockedFlapping(17), BLF blockedPersistent(18), BLP blockedFlappingPersistenr(19), BFP |
| bridgeRecord | 1.3.6.1.4.1.5504.6.77 | BRIDGE record MIB IP Software Minneapolis, MN | ||
| zhoneCompliances | 1.3.6.1.4.1.5504.9 | |||
| zhoneGroups | 1.3.6.1.4.1.5504.9.1 | |||
| zhoneBridgeGroup | 1.3.6.1.4.1.5504.9.1.23 | The list of zhone bridge objects. | ||
| zhoneBridgeCmdGroup | 1.3.6.1.4.1.5504.9.1.76 | Bridge CMD objects | ||
| zhoneBridgeEapsGroup | 1.3.6.1.4.1.5504.9.1.77 | EAPS objects | ||
| zhoneBridgeEapsConfigGroup | 1.3.6.1.4.1.5504.9.1.78 | EAPS config objects | ||
| zhoneBridgeEapsTopologyGroup | 1.3.6.1.4.1.5504.9.1.79 | EAPS Topology objects | ||
| zhoneBridgeNotificationGroup | 1.3.6.1.4.1.5504.9.1.80 | BRIDGE Notifications | ||
| zhoneBridgeIgmpGroup | 1.3.6.1.4.1.5504.9.1.81 | IGMP objects | ||
| zhoneBridgeStatsGroup | 1.3.6.1.4.1.5504.9.1.82 | Bridge STATS objects |
RFC description
Bridge record management for Zhone communication platforms. Maintains bridge statistics and configuration data.
Start monitoring Zhone Technologies broadband access/bridging device (MAC-learning/forwarding-table status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.