ZHONE-COM-BRIDGE-REC-MIB :: bridgeIfLookupFlush

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZHONE-COM-BRIDGE-REC-MIB › bridgeIfLookupFlush

bridgeIfLookupFlush

Module: ZHONE-COM-BRIDGE-REC-MIB

OID (symbolic): ZHONE-COM-BRIDGE-REC-MIB::bridgeIfLookupFlush

OID (numeric): 1.3.6.1.4.1.5504.4.7.4.1.4

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: The object 'bridgeIfLookupFlush' allows a user to flush learned entries in the bridgeFilterTable when the ifIndex of the entry is not known. A combination of address type, MAC or IP address and vlan ID is used to determine the ifIndex of the entry to be removed. Setting the object to 'true' causes the flush action to occur.

After the flush action is taken, the value of bridgeIfLookupFlush is immediately set back to 'false'.

What is bridgeIfLookupFlush?

Setting this to TRUE flushes a learned entry from the bridge filter table when its interface index isn't known, using the address type, MAC or IP address, and VLAN ID to identify which entry to remove; the value automatically reverts to FALSE once the flush completes. Useful for clearing a stale MAC/IP binding without knowing which port it was learned on.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.4.7.4.1.4
snmpwalk -v2c -c public <target> ZHONE-COM-BRIDGE-REC-MIB::bridgeIfLookupFlush

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.4.7.4.1.4.1
snmpget -v2c -c public <target> ZHONE-COM-BRIDGE-REC-MIB::bridgeIfLookupFlush.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5504.4.7.4.1.4.1 s <value>

Start monitoring Zhone Technologies broadband access/bridging device (MAC-learning/forwarding-table status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHONE-COM-BRIDGE-REC-MIB::bridgeIfLookupFlush OID value, configure state conditions and alerts, and monitor any Zhone Technologies broadband access/bridging device (MAC-learning/forwarding-table status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5504ZhoneBITSTORM-HP-160-MIB
1.3.6.1.4.1.5504.4zhoneCommunicationProtocolsZhone
1.3.6.1.4.1.5504.4.7zhoneBridgeZhone
Numeric OIDNameModule
1.3.6.1.4.1.5504.4.7.4bridgeIfLookupTableZHONE-COM-BRIDGE-REC-MIB
1.3.6.1.4.1.5504.4.7.4.1bridgeIfLookupEntryZHONE-COM-BRIDGE-REC-MIB
1.3.6.1.4.1.5504.4.7.4.1.4bridgeIfLookupFlushZHONE-COM-BRIDGE-REC-MIB