All MIBs › ZHONE-COM-BRIDGE-REC-MIB › bridgeIfVpi
bridgeIfVpi
Module: ZHONE-COM-BRIDGE-REC-MIB
OID (symbolic): ZHONE-COM-BRIDGE-REC-MIB::bridgeIfVpi
OID (numeric): 1.3.6.1.4.1.5504.4.7.2.1.1
Node type: OBJECT-TYPE
Type: AtmVpIdentifier
Access: read-create
Description: If this bridge interface is on an ATM VC, the ATM VPI is specified here. If the bridge interface is not an ATM VC, this field is ignored. The VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB.
What is bridgeIfVpi?
Sets the ATM Virtual Path Identifier (VPI) for a bridge interface that rides on an ATM virtual circuit; on non-ATM interfaces it is ignored. An admin configuring a DSL/ATM uplink pairs this with the VCI (bridgeIfVci) to identify the exact VPI/VCI pair, such as the common 0/35 or 8/35 PVC used by many DSL providers.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5504 | Zhone | BITSTORM-HP-160-MIB |
| 1.3.6.1.4.1.5504.4 | zhoneCommunicationProtocols | Zhone |
| 1.3.6.1.4.1.5504.4.7 | zhoneBridge | Zhone |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5504.4.7.2 | bridgeInterfaceTable | ZHONE-COM-BRIDGE-REC-MIB |
| 1.3.6.1.4.1.5504.4.7.2.1 | bridgeInterfaceEntry | ZHONE-COM-BRIDGE-REC-MIB |
| 1.3.6.1.4.1.5504.4.7.2.1.1 | bridgeIfVpi | ZHONE-COM-BRIDGE-REC-MIB |