ZHONE-DSCP-MIB

All MIBs › ZHONE-DSCP-MIB

Organization: Zhone Technologies, Inc.

Last Updated: 2010-06-03

Category: Zhone Technologies CPE and Access

Description: Manages Zhone Technologies DSCP marking rules, traffic class mapping, and QoS policy configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZHONE-DSCP-MIB?

ZHONE-DSCP-MIB is a Zhone Technologies (broadband access/DSL-PON equipment vendor) enterprise MIB module identifier for differentiated services code point (DSCP) definitions used in QoS traffic marking. It exposes configuration-oriented data: DSCP-to-traffic-class mappings and QoS marking policy definitions applied to traffic flows on Zhone access devices. While primarily a configuration module rather than a fault/performance module, monitoring its settings lets an operator verify that QoS policy configuration is correctly and consistently applied across devices, which indirectly affects software-level traffic handling and prioritization behavior. It likely complements or maps onto the IETF DIFFSERV-MIB / RFC 2474 DSCP framework rather than defining an independent alarm/threshold mechanism. This MIB is typically deployed on Zhone DSL, PON, or broadband access nodes and CPE where QoS classification of subscriber traffic needs to be centrally managed via SNMP. Engineers can download the ZHONE-DSCP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZHONE-DSCP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Zhone DSL/broadband access nodes
Zhone customer premises equipment (CPE)

Monitoring Examples

No object/table names were provided for this MIB in the sample data, so the specific structure of DSCP mapping tables cannot be described from source. In practice, an admin would poll DSCP-to-class mapping entries to confirm that voice or video traffic is marked with the expected DSCP codepoint and prioritized accordingly; a mismatch would reveal misconfigured QoS policy causing lower-priority queuing.

What Can Be Monitored

DSCP-to-traffic-class mappings
QoS marking policy configuration

Imported Objects

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

From Zhone

zhoneIp

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
I32 dscp00map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.3	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 0.
I32 dscp01map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.4	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 1.
I32 dscp02map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.5	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 2.
I32 dscp03map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.6	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 3.
I32 dscp04map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.7	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 4.
I32 dscp05map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.8	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 5.
I32 dscp06map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.9	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 6.
I32 dscp07map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.10	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 7.
I32 dscp08map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.11	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 8.
I32 dscp09map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.12	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 9.
I32 dscp10map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.13	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 10.
I32 dscp11map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.14	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 11.
I32 dscp12map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.15	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 12.
I32 dscp13map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.16	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 13.
I32 dscp14map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.17	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 14.
I32 dscp15map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.18	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 15.
I32 dscp16map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.19	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 16.
I32 dscp17map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.20	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 17.
I32 dscp18map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.21	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 18.
I32 dscp19map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.22	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 19.
I32 dscp20map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.23	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 20.
I32 dscp21map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.24	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 21.
I32 dscp22map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.25	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 22.
I32 dscp23map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.26	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 23.
I32 dscp24map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.27	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 24.
I32 dscp25map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.28	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 25.
I32 dscp26map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.29	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 26.
I32 dscp27map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.30	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 27.
I32 dscp28map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.31	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 28.
I32 dscp29map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.32	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 29.
I32 dscp30map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.33	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 30.
I32 dscp31map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.34	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 31.
I32 dscp32map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.35	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 32.
I32 dscp33map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.36	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 33.
I32 dscp34map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.37	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 34.
I32 dscp35map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.38	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 35.
I32 dscp36map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.39	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 36.
I32 dscp37map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.40	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 37.
I32 dscp38map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.41	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 38.
I32 dscp39map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.42	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 39.
I32 dscp40map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.43	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 40.
I32 dscp41map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.44	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 41.
I32 dscp42map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.45	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 42.
I32 dscp43map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.46	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 43.
I32 dscp44map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.47	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 44.
I32 dscp45map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.48	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 45.
I32 dscp46map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.49	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 46.
I32 dscp47map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.50	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 47.
I32 dscp48map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.51	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 48.
I32 dscp49map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.52	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 49.
I32 dscp50map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.53	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 50.
I32 dscp51map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.54	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 51.
I32 dscp52map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.55	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 52.
I32 dscp53map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.56	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 53.
I32 dscp54map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.57	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 54.
I32 dscp55map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.58	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 55.
I32 dscp56map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.59	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 56.
I32 dscp57map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.60	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 57.
I32 dscp58map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.61	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 58.
I32 dscp59map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.62	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 59.
I32 dscp60map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.63	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 60.
I32 dscp61map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.64	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 61.
I32 dscp62map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.65	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 62.
I32 dscp63map8021p	1.3.6.1.4.1.5504.4.1.22.1.1.66	Integer32	read-write	The desired 802.1p setting corresponding to DSCP value 63.
I32 dscpIndex	1.3.6.1.4.1.5504.4.1.22.1.1.1	Integer32	not-accessible	Index for the conceptual row associating an entry from this table to a unique DSCP instance.
dscpProfile	1.3.6.1.4.1.5504.4.1.22			This is the Zhone module identifier for the Zhone DSCP (differentiated services code point) definition.
dscpProfileEntry	1.3.6.1.4.1.5504.4.1.22.1.1		not-accessible	Zhone extension entry for DSCP rule usage.
dscpProfileGroup	1.3.6.1.4.1.5504.4.1.22.2			A collection of objects from dscpProfileEntry.
dscpProfileGroupObjectGroup	1.3.6.1.4.1.5504.4.1.22.3			A collection of objects from dscpProfileEntry.
ROW dscpProfileRowStatus	1.3.6.1.4.1.5504.4.1.22.1.1.2	RowStatus	read-write	For creating, modifying, and deleting this row.
dscpProfileTable	1.3.6.1.4.1.5504.4.1.22.1		not-accessible	Zhone extension table for DSCP rule usage.

RFC description

Zhone DSCP (Differentiated Services Code Point) definition MIB for QoS rule usage.

Start monitoring Zhone DSL/broadband access nodes, Zhone CPE (DSCP-to-traffic-class QoS-marking config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZHONE-DSCP-MIB

What Is ZHONE-DSCP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description