All MIBs › ZHONE-COM-BRIDGE-REC-MIB › bridgeIfVci
bridgeIfVci
Module: ZHONE-COM-BRIDGE-REC-MIB
OID (symbolic): ZHONE-COM-BRIDGE-REC-MIB::bridgeIfVci
OID (numeric): 1.3.6.1.4.1.5504.4.7.2.1.2
Node type: OBJECT-TYPE
Type: AtmVcIdentifier
Access: read-create
Description: If this bridge interface is on an ATM VC, the ATM VCI is specified here. The range is 32...65535. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB.
If the bridge interface is not an ATM VC, but for example an ethernet interface, this field should be set to 0.
What is bridgeIfVci?
Sets the ATM Virtual Channel Identifier (VCI, 32-65535) that together with bridgeIfVpi identifies the ATM PVC this bridge interface uses. For non-ATM interfaces like Ethernet it should be left at 0; getting the VPI/VCI pair wrong is a common reason a DSL bridge interface never comes up.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5504 | Zhone | BITSTORM-HP-160-MIB |
| 1.3.6.1.4.1.5504.4 | zhoneCommunicationProtocols | Zhone |
| 1.3.6.1.4.1.5504.4.7 | zhoneBridge | Zhone |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5504.4.7.2 | bridgeInterfaceTable | ZHONE-COM-BRIDGE-REC-MIB |
| 1.3.6.1.4.1.5504.4.7.2.1 | bridgeInterfaceEntry | ZHONE-COM-BRIDGE-REC-MIB |
| 1.3.6.1.4.1.5504.4.7.2.1.2 | bridgeIfVci | ZHONE-COM-BRIDGE-REC-MIB |