XYLO-CALLMGMT-MIB

All MIBs › XYLO-CALLMGMT-MIB

Description: Xylogics Remote Annex call management including active-call tables, call history, modem call statistics, and per-port actions for dial-up access servers

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is XYLO-CALLMGMT-MIB?

XYLO-CALLMGMT-MIB is a Xylogics enterprise MIB for managing call activity on Remote Annex dial-up access servers, communications servers widely used for modem/terminal-server access and later part of Bay Networks/Nortel. It exposes active-call tables, historical call records, modem call statistics, and per-port control actions. This MIB is heavily oriented toward monitoring hardware/service status: administrators poll it to see which ports currently have active calls, review call history for connection failures or short-duration disconnects, and check modem-specific statistics like connect speed and error/retrain counts that indicate a degrading modem or noisy phone line. It typically works alongside Xylogics' broader Annex port and terminal-server MIBs rather than any IETF dial-up standard. It is deployed on Remote Annex communication servers providing dial-up/modem access in ISP or enterprise remote-access environments.

IPNetwork Monitor allows you to monitor SNMP objects defined in XYLO-CALLMGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Xylogics Remote Annex communication/access servers

Monitoring Examples

An administrator would poll the active-call table to see which ports currently show an established call and cross-reference the call-history table to check recent connect/disconnect reasons for a specific port. Modem call statistics such as connect speed and retrain count for that port would then be checked to determine whether a high retrain count indicates a bad phone line or failing modem. Because no sample objects were captured, exact object names cannot be confirmed, but the short description makes clear the MIB centers on active calls, call history, modem statistics, and per-port actions, which is why a XYLO-CALLMGMT-MIB download remains the practical starting point for building these checks.

What Can Be Monitored

active calls per port
call history and disconnect reasons
modem connect speed and retrain/error counts
per-port call control actions

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter

From RFC1213-MIB

DisplayString

From XYLO-MIB-SMI

callmgmt

OBJECT-IDENTITY

From XYLO-MODEM-MIB

mdmNumber

OBJECT-TYPE

From XYLO-WAN-MIB

anxt1ChanIndex	OBJECT-TYPE
anxt1ChanNumber	OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
activecall	1.3.6.1.4.1.15.2.16.1
activecallTable	1.3.6.1.4.1.15.2.16.1.1		not-accessible	A table of active call information.
activecallEntry	1.3.6.1.4.1.15.2.16.1.1.1		not-accessible	A row in the active call table.
STR actcallUsername	1.3.6.1.4.1.15.2.16.1.1.1.1	DisplayString	read-only	Name of the user associated with this call. A null string is returned if the call is active but the current user name cannot be determined at the time of the call.
STR actcallCallingNumber	1.3.6.1.4.1.15.2.16.1.1.1.2	DisplayString	read-only	The number from which this call was made. Can be a null string. This object obsoletes the callSetupCallingNbr object.
STR actcallCalledNumber	1.3.6.1.4.1.15.2.16.1.1.1.3	DisplayString	read-only	The number to which this call was made. Can be a null string. This object obsoletes the callSetupCalledNbr object.
STR actcallSPBName	1.3.6.1.4.1.15.2.16.1.1.1.4	DisplayString	read-only	Session Parameter Block name. The RAC determines how to handle a call through the SPB. The SPB is defined in the configuration file. When a call comes in, the RAC tries to match the received setup information elements that accompanied the call with the values in the setup criteria section of the defined SPBs. The first SPB that matches the call's setup criteria is used.
INT actcallDeviceType	1.3.6.1.4.1.15.2.16.1.1.1.5	INTEGER	read-only	An enumerated integer indicating the port type. asy(1) - the call is assigned internally to an asynchronous device (async port). syn(9) - the call is handled internally by a synchronous device (sync port). ta(10) - the call is handled internally by a ta device (ta port). mp(12) - pseudo-session, Multi-link PPP bundle head. This object obsoletes the callSetupPortType object.
INT actcallDeviceNumber	1.3.6.1.4.1.15.2.16.1.1.1.6	INTEGER	read-only	The one-based device (port) number the call is assigned to. This object in conjunction with the object, actcallDeviceType, should be used to cross-reference the information displayed by the CLI command 'who'. This object obsoletes the callSetupPortNumber object.
STR actcallSubAddress	1.3.6.1.4.1.15.2.16.1.1.1.7	DisplayString	read-only	The subaddress this call is connected to. Can be a null string. This object obsoletes the callSetupCalledSubAddr object.
INT actcallBearer	1.3.6.1.4.1.15.2.16.1.1.1.8	INTEGER	read-only	This object defines the bearer capability of the incoming call. This object obsoletes the callSetupBearer object.
INT actcallSetupTime	1.3.6.1.4.1.15.2.16.1.1.1.9	INTEGER	read-only	The time that the call started. This is RAC system time, which is the same as Unix system time: seconds since 0:00 January 1, 1970 UTC (GMT). This object obsoletes callSetupCallingTime.
INT actcallDuration	1.3.6.1.4.1.15.2.16.1.1.1.10	INTEGER	read-only	Duration of the phone call, in seconds.
STR actcalllocalin	1.3.6.1.4.1.15.2.16.1.1.1.11	DisplayString	read-only	The Internet (IP) address assigned to the RAC end of a point-to-point link established during this call, in dotted-decimal notation.
STR actcallremotein	1.3.6.1.4.1.15.2.16.1.1.1.12	DisplayString	read-only	The Internet (IP) address assigned to the far end of a point-to-point link established during this call, in dotted-decimal notation.
STR actcalllocalat	1.3.6.1.4.1.15.2.16.1.1.1.13	DisplayString	read-only	The local AppleTalk address assigned to this call.
STR actcallremoteat	1.3.6.1.4.1.15.2.16.1.1.1.14	DisplayString	read-only	The remote AppleTalk address assigned to this call.
STR actcalllocalipx	1.3.6.1.4.1.15.2.16.1.1.1.15	DisplayString	read-only	The local IPX address assigned to this call.
STR actcallremoteipx	1.3.6.1.4.1.15.2.16.1.1.1.16	DisplayString	read-only	The remote IPX address assigned to this call.
INT actcallConnectionType	1.3.6.1.4.1.15.2.16.1.1.1.17	INTEGER	read-only	The name of the client routine running on the port at the time of this call.
CTR actcallOctetsRx	1.3.6.1.4.1.15.2.16.1.1.1.18	Counter	read-only	The number of octets received during this call.
CTR actcallOctetsTx	1.3.6.1.4.1.15.2.16.1.1.1.19	Counter	read-only	The number of octets transmitted during this call.
INT actcallOrigin	1.3.6.1.4.1.15.2.16.1.1.1.20	INTEGER	read-only	The call origin. incoming(1) - the RAC answered an incoming call. outgoing(2) - the RAC made the call. This object obsoletes the callSetupCallType object.
INT actcallCallState	1.3.6.1.4.1.15.2.16.1.1.1.21	INTEGER	read-only	The current state of this call. invalid(1)-call is inactive and the contents of this table row are not valid. valid(2)- call is active and contents of this table row are valid.
INT actcallConfiguredType	1.3.6.1.4.1.15.2.16.1.1.1.22	INTEGER	read-only	The type (mode) of the port at the time of the connection. cli - allows an incoming session access to the CLI. The CLI provides access to the network and connections to other hosts via the telnet, connect, rlogin and tn3270 commands. slip - allows a port to perform as a network interface using SLIP. IP packets are encapsulated by SLIP. ppp - allows a port to perform as a network interface using PPP. Packets of several protocols are encapsulated by PPP. arap - allows a port to perform as a network interface using ARAP. slave - allows a port to accept TCP connections over the network. connect - allows a port to communicate with a LAT host via the connect command. rlogin - allows a port to communicate via the rlogin command. telnet - allows a port to communicate via the telnet command. tn3270 - allows a port to communicate via the tn3270 command.
INT actcallOwningBundle	1.3.6.1.4.1.15.2.16.1.1.1.23	INTEGER	read-only	The identifier of the MP bundle that owns this PPP link.
actCallTable	1.3.6.1.4.1.15.2.16.1.2		not-accessible	A table of active call information.
actCallEntry	1.3.6.1.4.1.15.2.16.1.2.1		not-accessible	A row in the active call table.
INT activeCallDeviceType	1.3.6.1.4.1.15.2.16.1.2.1.1	INTEGER	read-only	An enumerated integer indicating the port type. asy(1) - the call is assigned internally to an asynchronous device (async port). syn(9) - the call is handled internally by a synchronous device (sync port). ta(10) - the call is handled internally by a ta device (ta port). mp(12) - pseudo-session, Multi-link PPP bundle head. vpn(13) - Virtual Private Network. gen-sync(14) - General Sync port. This object obsoletes the callSetupPortType object.
INT activeCallDeviceNumber	1.3.6.1.4.1.15.2.16.1.2.1.2	INTEGER	read-only	The one-based device (port) number the call is assigned to. This object in conjunction with the object, actcallDeviceType, should be used to cross-reference the information displayed by the CLI command 'who'. This object obsoletes the callSetupPortNumber object.
STR activeCallUsername	1.3.6.1.4.1.15.2.16.1.2.1.3	DisplayString	read-only	Name of the user associated with this call. A null string is returned if the call is active but the current user name cannot be determined at the time of the call.
STR activeCallCallingNumber	1.3.6.1.4.1.15.2.16.1.2.1.4	DisplayString	read-only	The number from which this call was made. Can be a null string. This object obsoletes the callSetupCallingNbr object.
STR activeCallCalledNumber	1.3.6.1.4.1.15.2.16.1.2.1.5	DisplayString	read-only	The number to which this call was made. Can be a null string. This object obsoletes the callSetupCalledNbr object.
STR activeCallSPBName	1.3.6.1.4.1.15.2.16.1.2.1.6	DisplayString	read-only	Session Parameter Block name. The RAC determines how to handle a call through the SPB. The SPB is defined in the configuration file. When a call comes in, the RAC tries to match the received setup information elements that accompanied the call with the values in the setup criteria section of the defined SPBs. The first SPB that matches the call's setup criteria is used.
STR activeCallSubAddress	1.3.6.1.4.1.15.2.16.1.2.1.7	DisplayString	read-only	The subaddress this call is connected to. Can be a null string. This object obsoletes the callSetupCalledSubAddr object.
INT activeCallBearer	1.3.6.1.4.1.15.2.16.1.2.1.8	INTEGER	read-only	This object defines the bearer capability of the incoming call. This object obsoletes the callSetupBearer object.
INT activeCallSetupTime	1.3.6.1.4.1.15.2.16.1.2.1.9	INTEGER	read-only	The time that the call started. This is RAC system time, which is the same as Unix system time: seconds since 0:00 January 1, 1970 UTC (GMT). This object obsoletes callSetupCallingTime.
INT activeCallDuration	1.3.6.1.4.1.15.2.16.1.2.1.10	INTEGER	read-only	Duration of the phone call, in seconds.
STR activeCalllocalin	1.3.6.1.4.1.15.2.16.1.2.1.11	DisplayString	read-only	The Internet (IP) address assigned to the RAC end of a point-to-point link established during this call, in dotted-decimal notation.
STR activeCallremotein	1.3.6.1.4.1.15.2.16.1.2.1.12	DisplayString	read-only	The Internet (IP) address assigned to the far end of a point-to-point link established during this call, in dotted-decimal notation.
STR activeCalllocalipx	1.3.6.1.4.1.15.2.16.1.2.1.13	DisplayString	read-only	The local IPX address assigned to this call.
STR activeCallremoteipx	1.3.6.1.4.1.15.2.16.1.2.1.14	DisplayString	read-only	The remote IPX address assigned to this call.
INT activeCallConnectionType	1.3.6.1.4.1.15.2.16.1.2.1.15	INTEGER	read-only	The name of the client routine running on the port at the time of this call.
CTR activeCallOctetsRx	1.3.6.1.4.1.15.2.16.1.2.1.16	Counter	read-only	The number of octets received during this call.
CTR activeCallOctetsTx	1.3.6.1.4.1.15.2.16.1.2.1.17	Counter	read-only	The number of octets transmitted during this call.
INT activeCallOrigin	1.3.6.1.4.1.15.2.16.1.2.1.18	INTEGER	read-only	The call origin. incoming(1) - the RAC answered an incoming call. outgoing(2) - the RAC made the call. This object obsoletes the callSetupCallType object.
INT activeCallCallState	1.3.6.1.4.1.15.2.16.1.2.1.19	INTEGER	read-only	The current state of this call. invalid(1)-call is inactive and the contents of this table row are not valid. valid(2)- call is active and contents of this table row are valid.
INT activeCallConfiguredType	1.3.6.1.4.1.15.2.16.1.2.1.20	INTEGER	read-only	The type (mode) of the port at the time of the connection. cli - allows an incoming session access to the CLI. The CLI provides access to the network and connections to other hosts via the telnet, connect, rlogin and tn3270 commands. slip - allows a port to perform as a network interface using SLIP. IP packets are encapsulated by SLIP. ppp - allows a port to perform as a network interface using PPP. Packets of several protocols are encapsulated by PPP. arap - allows a port to perform as a network interface using ARAP. slave - allows a port to accept TCP connections over the network. connect - allows a port to communicate with a LAT host via the connect command. rlogin - allows a port to communicate via the rlogin command. telnet - allows a port to communicate via the telnet command. tn3270 - allows a port to communicate via the tn3270 command.
INT activeCallOwningBundle	1.3.6.1.4.1.15.2.16.1.2.1.21	INTEGER	read-only	The identifier of the MP bundle that owns this PPP link. This number will always be the same as the mp device number. For example, mp17 devtype will have a owningBundle number of 17
INT activeCallWanIndex	1.3.6.1.4.1.15.2.16.1.2.1.22	INTEGER	read-only	The wan interface number
INT activeCallChanIndex	1.3.6.1.4.1.15.2.16.1.2.1.23	INTEGER	read-only	The channel number
STR activeCallLocalAt	1.3.6.1.4.1.15.2.16.1.2.1.24	DisplayString	read-only	The local AppleTalk address assigned to this call.
STR activeCallRemoteAt	1.3.6.1.4.1.15.2.16.1.2.1.25	DisplayString	read-only	The remote AppleTalk address assigned to this call.
actCallAsyTable	1.3.6.1.4.1.15.2.16.1.3		not-accessible	A table of modem call statistics indexed by the async device number (which is identical to the modem number)
actCallAsyEntry	1.3.6.1.4.1.15.2.16.1.3.1		not-accessible	A row in the modem call statistics table.
INT activeCallAsyBeginRxSpeed	1.3.6.1.4.1.15.2.16.1.3.1.3	INTEGER	read-only	The receive connect speed at the time the call was established. Note: The agent will return zero if the modem is not in a busy state.
INT activeCallAsyCurrRxSpeed	1.3.6.1.4.1.15.2.16.1.3.1.4	INTEGER	read-only	The current receive connect speed of the call.
INT activeCallAsyBeginTxSpeed	1.3.6.1.4.1.15.2.16.1.3.1.5	INTEGER	read-only	The transmit connect speed at the time the call was established. Note: The agent will return zero if the modem is not in a busy state.
INT activeCallAsyCurrTxSpeed	1.3.6.1.4.1.15.2.16.1.3.1.6	INTEGER	read-only	The current transmit connect speed of the call.
INT activeCallAsyTxBaudRate	1.3.6.1.4.1.15.2.16.1.3.1.7	INTEGER	read-only	The rate at which symbols that carry data are generated. Symbol rate limits and options apply to the modem v.34. Default is r2400(1).
INT activeCallAsyRxBaudRate	1.3.6.1.4.1.15.2.16.1.3.1.8	INTEGER	read-only	The rate at which symbols that carry data are received. Symbol rate limits and options apply to the modem v.34. Default is r2400(1).
INT activeCallAsyCurrSignalQ	1.3.6.1.4.1.15.2.16.1.3.1.10	INTEGER	read-only	Current line signal quality. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable.
INT activeCallAsyBeginRxLineLevel	1.3.6.1.4.1.15.2.16.1.3.1.11	INTEGER	read-only	The receive signal level at the beginning of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem.
INT activeCallAsyCurrRxLineLevel	1.3.6.1.4.1.15.2.16.1.3.1.12	INTEGER	read-only	The current receive signal level of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem.
INT activeCallAsyErrorProtocol	1.3.6.1.4.1.15.2.16.1.3.1.14	INTEGER	read-only	Error correction protocol used by the modem.
INT activeCallAsyCompressionProtocol	1.3.6.1.4.1.15.2.16.1.3.1.15	INTEGER	read-only	Data compression protocol used by the modem. The compression protocol used by the modem is dependent on the error correction protocol used at the lower layer.
CTR activeCallAsyTxPackets	1.3.6.1.4.1.15.2.16.1.3.1.16	Counter	read-only	The number of LAPM packets sent by the modem. This does not include retransmitted packets.
CTR activeCallAsyTxPacketError	1.3.6.1.4.1.15.2.16.1.3.1.17	Counter	read-only	The number of LAPM packets retransmitted by the modem.
CTR activeCallAsyRxPackets	1.3.6.1.4.1.15.2.16.1.3.1.19	Counter	read-only	The number of good LAPM packets received by the modem.
CTR activeCallAsyRxPacketError	1.3.6.1.4.1.15.2.16.1.3.1.20	Counter	read-only	The number of bad LAPM packets (with CRC errors) received by the modem.
CTR activeCallAsyRetrainReqSent	1.3.6.1.4.1.15.2.16.1.3.1.22	Counter	read-only	The number of retrains requested by the modem for this call.
CTR activeCallAsyRetrainReqReceived	1.3.6.1.4.1.15.2.16.1.3.1.23	Counter	read-only	The number of retrain requests received by the modem from the remote modem for this call.
CTR activeCallAsyRRNReqReceived	1.3.6.1.4.1.15.2.16.1.3.1.24	Counter	read-only	Number of rate renegotiation request (RRN) initiated by the remote modem.
CTR activeCallAsyRRNReqSent	1.3.6.1.4.1.15.2.16.1.3.1.25	Counter	read-only	Number of rate renegotiation request (RRN) initiated by this modem.
INT activeCallAsyRoundTripDelay	1.3.6.1.4.1.15.2.16.1.3.1.26	INTEGER	read-only	The round trip delay, in milliseconds, for this call. This object alongwith the object, activeCallAsyFarEndEchoFreq, gives the echo characteristics of the call.
INT activeCallAsyFarEndEchoFreq	1.3.6.1.4.1.15.2.16.1.3.1.27	INTEGER	read-only	Far end echo frequency offset, in Hertz. This object alongwith the object, activeCallAsyRoundTripDelay, gives the echo characteristics of the call.
INT activeCallAsyFarEndEchoLevel	1.3.6.1.4.1.15.2.16.1.3.1.28	INTEGER	read-only	Far end echo level, in decibels. The number represents the negative decibels.
INT activeCallAsyChanFreqOffset	1.3.6.1.4.1.15.2.16.1.3.1.29	INTEGER	read-only	Channel frequency offset, in Hertz.
INT activeCallAsyOscFreqOffset	1.3.6.1.4.1.15.2.16.1.3.1.30	INTEGER	read-only	Oscillator frequency offset, in PPM. Not always valid.
INT activeCallAsySNR	1.3.6.1.4.1.15.2.16.1.3.1.31	INTEGER	read-only	Signal to noise ratio in decibels. Low is bad, high is good. Zero means not valid: no current connection, or connection is not V.34 (other protocols don't calculate this).
INT activeCallAsyx2Status	1.3.6.1.4.1.15.2.16.1.3.1.32	INTEGER	read-only	x2 phase bit map --------------------- \| 4 \| 3 \| 2 \| 1 \| 0 \| bits --------------------- \|DM \|P4 \|P3 \|P2 \|P1 \| --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 X2 In Phase 3 P4 = 1 X2 In Phase 4 DM = 1 X2 In Data Mode
INT activeCallAsyx2RbsStatus	1.3.6.1.4.1.15.2.16.1.3.1.33	INTEGER	read-only	x2 raw bit signalling, bit map ------------------------- \| 5 \| 4 \| 3 \| 2 \| 1 \| 0 \| bits ------------------------- \|S5 \|S4 \|S3 \|S2 \|S1 \|S0 \| ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5
INT activeCallAsyx2DigitalPadStatus	1.3.6.1.4.1.15.2.16.1.3.1.34	INTEGER	read-only	x2 attenuation
INT activeCallAsyk56Status	1.3.6.1.4.1.15.2.16.1.3.1.36	INTEGER	read-only	k56 phase bit map --------------------- \| 4 \| 3 \| 2 \| 1 \| 0 \| bits --------------------- \|DM \|P4 \|P3 \|P2 \|P1 \| --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 K56 In Phase 3 P4 = 1 K56 In Phase 4 DM = 1 K56 In Data Mode
INT activeCallAsyk56RbsStatus	1.3.6.1.4.1.15.2.16.1.3.1.37	INTEGER	read-only	k56 raw bit signalling, bit map ------------------------- \| 5 \| 4 \| 3 \| 2 \| 1 \| 0 \| bits ------------------------- \|S5 \|S4 \|S3 \|S2 \|S1 \|S0 \| ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5
INT activeCallAsyk56DigitalPadStatus	1.3.6.1.4.1.15.2.16.1.3.1.38	INTEGER	read-only	k56 attenuation
INT activeCallAsyk56Version	1.3.6.1.4.1.15.2.16.1.3.1.40	INTEGER	read-only	k56 version number
INT activeCallAsyWANUnitNumber	1.3.6.1.4.1.15.2.16.1.3.1.41	INTEGER	read-only	The physical WAN module unit number in the RAC that uses WAN modules. The range is 1 to anxt1Total. Use anxt1WanModuleTable to retrieve the unit's ifIndex number.(For R14.1 and later releases, WAN1=1001 and WAN2 = 1002 always
INT activeCallAsyChannel	1.3.6.1.4.1.15.2.16.1.3.1.42	INTEGER	read-only	A number from 1 to anxt1TotChan that identifies which DS0 channel handled the call.
INT activeCallAsyCurrModulation	1.3.6.1.4.1.15.2.16.1.3.1.43	INTEGER	read-only	Beginning negotiated modulation mode.
INT activeCallAsyCurrPumpState	1.3.6.1.4.1.15.2.16.1.3.1.44	INTEGER	read-only	End pump status.
INT activeCallAsyx2SpeedReduction	1.3.6.1.4.1.15.2.16.1.3.1.45	INTEGER	read-only	Speed reduction due to spectral shaping: 0 no speed reduction 1 speed reduction of 1.333 kBps 2 speed reduction of 2.666 kBps 3 speed reduction of 4.0 kBps 4 speed reduction of 5.333 kBps 5 speed reduction of 6.666 kBps 6 speed reduction of 8.0 kBps
INT activeCallAsyk56SpeedReduction	1.3.6.1.4.1.15.2.16.1.3.1.46	INTEGER	read-only	Speed reduction due to robbed bits: 0 no speed reduction 1 speed reduction of 2.0 kBps 2 speed reduction of 4.0 kBps 3 speed reduction of 6.0 kBps 4 speed reduction of 8.0 kBps
INT activeCallAsyV90Status	1.3.6.1.4.1.15.2.16.1.3.1.47	INTEGER	read-only	V90 status (this is a bitmap): 1 = currently in V90 mode 2 = V90 detected in phase 1 4 = V90 detected in phase 2 8 = V90 through phase 3 16 = V90 through phase 4 32 = V90 in data mode 64 = V90 data mode at least once
INT activeCallAsyV90ConstellationIndex0	1.3.6.1.4.1.15.2.16.1.3.1.48	INTEGER	read-only	Constellation index for symbol 0.
INT activeCallAsyV90ConstellationIndex1	1.3.6.1.4.1.15.2.16.1.3.1.49	INTEGER	read-only	Constellation index for symbol 1
INT activeCallAsyV90ConstellationIndex2	1.3.6.1.4.1.15.2.16.1.3.1.50	INTEGER	read-only	Constellation index for symbol 2
INT activeCallAsyV90ConstellationIndex3	1.3.6.1.4.1.15.2.16.1.3.1.51	INTEGER	read-only	Constellation index for symbol 3
INT activeCallAsyV90ConstellationIndex4	1.3.6.1.4.1.15.2.16.1.3.1.52	INTEGER	read-only	Constellation index for symbol 4
INT activeCallAsyV90ConstellationIndex5	1.3.6.1.4.1.15.2.16.1.3.1.53	INTEGER	read-only	Constellation index for symbol 5
INT activeCallAsyV90PADStatus	1.3.6.1.4.1.15.2.16.1.3.1.54	INTEGER	read-only	Digital attenuation in dB.
INT activeCallAsyV90ShapingBits	1.3.6.1.4.1.15.2.16.1.3.1.55	INTEGER	read-only	Number of CSS redundancy bits.
INT activeCallAsyV90LookAhead	1.3.6.1.4.1.15.2.16.1.3.1.56	INTEGER	read-only	Number of look ahead CSS frames.
INT activeCallAsyV90ConstellationPower	1.3.6.1.4.1.15.2.16.1.3.1.57	INTEGER	read-only	V90 constellation power in -dBm.
INT activeCallAsyV90HalfDuplexRRNRx	1.3.6.1.4.1.15.2.16.1.3.1.58	INTEGER	read-only	Number of received half-duplex RRNs.
actCallTaTable	1.3.6.1.4.1.15.2.16.1.4		not-accessible	A table of TA call statistics indexed by the TA device number.
actCallTaEntry	1.3.6.1.4.1.15.2.16.1.4.1		not-accessible	A row in the TA call statistics table.
INT activeCallTaSpeed	1.3.6.1.4.1.15.2.16.1.4.1.1	INTEGER	read-only	The receive connect speed at the time the call was established.
actCallSyncTable	1.3.6.1.4.1.15.2.16.1.5		not-accessible	A table of Sync call statistics indexed by the Sync device number.
actCallSyncEntry	1.3.6.1.4.1.15.2.16.1.5.1		not-accessible	A row in the Sync call statistics table.
INT activeCallSyncSpeed	1.3.6.1.4.1.15.2.16.1.5.1.1	INTEGER	read-only	The receive connect speed at the time the call was established.
actCallMpTable	1.3.6.1.4.1.15.2.16.1.6		not-accessible	A table of call history MP information/statistics.
actCallMpEntry	1.3.6.1.4.1.15.2.16.1.6.1		not-accessible	A row in the call history MP table.
INT activeCallMpBundleIdx	1.3.6.1.4.1.15.2.16.1.6.1.1	INTEGER	read-only	The identifier of this MP bundle.
callHist	1.3.6.1.4.1.15.2.16.2
INT callHistMaxCalls	1.3.6.1.4.1.15.2.16.2.1	INTEGER	read-write	The maximum number of calls for which history is kept by the RAC. Default is 0. Note: Assigning an arbitrarily large value to this object could affect the performance of the box due to memory being used to maintain this table. Each call record uses about 500 bytes of RAC memory.
INT callHistStartIdx	1.3.6.1.4.1.15.2.16.2.2	INTEGER	read-only	The beginning (lowest) value of callHistIndex currently in the call history table. This is the oldest call currently in the table. Note this value could change at any time since the table could have new calls added to it and old calls dropping off the table.
INT callHistEndIdx	1.3.6.1.4.1.15.2.16.2.3	INTEGER	read-only	The end (highest) value of callHistIndex in the call history table. Note this value could change at any time since the table will have new calls added whenever a call terminates.
callHistTable	1.3.6.1.4.1.15.2.16.2.4		not-accessible	A table of call history information. You should view this table as either a circular buffer or a sliding window whose size is specified by callHistMaxCalls. When the table is full and a call terminates, the information for the oldest call in the table is discarded and the new call information is added. The callHistStartIdx value is changed whenever a call's information is discarded. The callHistEndIdx value is changed whenever a call's information is added to the table.
callHistEntry	1.3.6.1.4.1.15.2.16.2.4.1		not-accessible	A row in the call history table.
INT callHistIndex	1.3.6.1.4.1.15.2.16.2.4.1.1	INTEGER	read-only	A unique identifier assigned to a call in the call history table. When a call terminates, its call record is moved from the active call table to the call history table, and the next higher history index number is assigned to it.
STR callHistUsername	1.3.6.1.4.1.15.2.16.2.4.1.2	DisplayString	read-only	Name of the user associated with this call. Can be a null string. This object obsoletes anxmStatsUsername.
STR callHistCallingNumber	1.3.6.1.4.1.15.2.16.2.4.1.3	DisplayString	read-only	The number from which this call was made. Can be a null string.
STR callHistCalledNumber	1.3.6.1.4.1.15.2.16.2.4.1.4	DisplayString	read-only	The number to which this call was made. Can be a null string. This object obsoletes anxmStatsNumber.
STR callHistSPBName	1.3.6.1.4.1.15.2.16.2.4.1.5	DisplayString	read-only	Session Parameter Block name used when answering the call. Can be a null string.
INT callHistWANUnitNumber	1.3.6.1.4.1.15.2.16.2.4.1.6	INTEGER	read-only	The physical WAN module unit number in the RAC that uses WAN modules. The range is 1 to anxt1Total. Use anxt1WanModuleTable to retrieve the unit's ifIndex number.
INT callHistChannel	1.3.6.1.4.1.15.2.16.2.4.1.7	INTEGER	read-only	A number from 1 to anxt1TotChan that identifies which DS0 channel handled the call.
INT callHistDeviceType	1.3.6.1.4.1.15.2.16.2.4.1.8	INTEGER	read-only	An enumerated integer indicating the port type. asy(1) - the call was assigned internally to an asynchronous device (async port). syn(9) - the call was handled internally by a synchronous device (sync port). ta(10) - the call was handled internally by a ta device (ta port). mp(12) - pseudo-session, Multi-link PPP bundle head.
INT callHistDeviceNumber	1.3.6.1.4.1.15.2.16.2.4.1.9	INTEGER	read-only	The 1-based device (port) number the call was assigned to. This object in conjunction with the object, callHistDeviceType, should be used to cross-reference the information displayed by the CLI command 'who'. This object obsoletes anxmStatsPort.
STR callHistSubAddress	1.3.6.1.4.1.15.2.16.2.4.1.10	DisplayString	read-only	The subaddress this call was connected to. Can be a null string.
INT callHistBearer	1.3.6.1.4.1.15.2.16.2.4.1.11	INTEGER	read-only	This object defines the bearer capability of the incoming call.
INT callHistSetupTime	1.3.6.1.4.1.15.2.16.2.4.1.12	INTEGER	read-only	The time that the call started. This is RAC system time, which is the same as Unix system time: seconds since 0:00 January 1, 1970 UTC (GMT). This object obsoletes anxmStatsTime.
INT callHistDuration	1.3.6.1.4.1.15.2.16.2.4.1.13	INTEGER	read-only	Duration of the call, in seconds. This object obsoletes anxmStatsDuration.
STR callHistlocalin	1.3.6.1.4.1.15.2.16.2.4.1.14	DisplayString	read-only	The Internet (IP) address assigned to the RAC end of a point-to-point link established during this call, in dotted-decimal notation.
STR callHistremotein	1.3.6.1.4.1.15.2.16.2.4.1.15	DisplayString	read-only	The Internet (IP) address assigned to the far end of a point-to-point link established during this call, in dotted-decimal notation.
STR callHistlocalat	1.3.6.1.4.1.15.2.16.2.4.1.16	DisplayString	read-only	The local AppleTalk address assigned to this call.
STR callHistremoteat	1.3.6.1.4.1.15.2.16.2.4.1.17	DisplayString	read-only	The remote AppleTalk address assigned to this call.
STR callHistlocalipx	1.3.6.1.4.1.15.2.16.2.4.1.18	DisplayString	read-only	The local IPX address assigned to this call.
STR callHistremoteipx	1.3.6.1.4.1.15.2.16.2.4.1.19	DisplayString	read-only	The remote IPX address assigned to this call.
INT callHistConnectionType	1.3.6.1.4.1.15.2.16.2.4.1.20	INTEGER	read-only	The name of the client routine running on the port at the time of this call.
CTR callHistOctetsRx	1.3.6.1.4.1.15.2.16.2.4.1.21	Counter	read-only	The number of octets received during this call.
CTR callHistOctetsTx	1.3.6.1.4.1.15.2.16.2.4.1.22	Counter	read-only	The number of octets transmitted during this call.
INT callHistOrigin	1.3.6.1.4.1.15.2.16.2.4.1.23	INTEGER	read-only	The call origin. incoming(1) - the RAC answered an incoming call. outgoing(2) - the call was made by the RAC. This object deprecates callSetupCallType object.
INT callHistDisconnectReason	1.3.6.1.4.1.15.2.16.2.4.1.24	INTEGER	read-only	Call disconnect reasons: unknown telDisc got telephone disconnect (hangup) dialFailed wanmgrErr internal error, shouldn't happen reset WAN/channel reset admErrornext general internal mechanism to end call admModDown DSR or DCD went down pppTerm PPP protocol disconnect inactivity inactivity timer ran out hangupCmd CLI command 'hangup' lastJob CLI last-job maxLogon max logon timer ran out slaveNormal normal slave termination slaveError abnormal slave termination noCarrier modem failed to establish a connection cliInactivity cli_inactivity timer ran out portReset port was reset cliAuthFail CLI authorization failed slaveAuthFail slave port authorization failed pppPapFail PPP PAP failed pppChapFail PPP CHAP failed modemReset internal modem was reset deadModemReset internal modem was reset because it was not responding
INT callHistConfiguredType	1.3.6.1.4.1.15.2.16.2.4.1.25	INTEGER	read-only	The type (mode) of the port at the time of the connection. cli - allows an incoming session access to the CLI. The CLI provides access to the network and connections to other hosts via the telnet, connect, rlogin and tn3270 commands. slip - allows a port to perform as a network interface using SLIP. IP packets are encapsulated by SLIP. ppp - allows a port to perform as a network interface using PPP. Packets of several protocols are encapsulated by PPP. arap - allows a port to perform as a network interface using ARAP. slave - allows a port to accept TCP connections over the network. connect - allows a port to communicate with a LAT host via the connect command. rlogin - allows a port to communicate via the rlogin command. telnet - allows a port to communicate via the telnet command. tn3270 - allows a port to communicate via the tn3270 command.
INT callHistCompositeDisconnect	1.3.6.1.4.1.15.2.16.2.4.1.26	INTEGER	read-only	Composite call disconnect reason. Either system or modem disconnect reason (callHistDisconnectReason or callHistAsyMdmDisconnectReason). Modem reasons have 100,000 added to avoid collisions (since SNMP does not allow enum values to be negative). The modem version of 'unknown' does not occur here.
INT callHistOwningBundle	1.3.6.1.4.1.15.2.16.2.4.1.27	INTEGER	read-only	The identifier of the MP bundle that owns this PPP link.
callHistAsyTable	1.3.6.1.4.1.15.2.16.2.5		not-accessible	A table of call history asynchronous information/statistics.
callHistAsyEntry	1.3.6.1.4.1.15.2.16.2.5.1		not-accessible	A row in the call history async. table.
INT callHistAsyBeginRxSpeed	1.3.6.1.4.1.15.2.16.2.5.1.1	INTEGER	read-only	The receive connect speed when the modem connection was established.
INT callHistAsyEndRxSpeed	1.3.6.1.4.1.15.2.16.2.5.1.2	INTEGER	read-only	The ending receive connect speed of the call.
INT callHistAsyBeginTxSpeed	1.3.6.1.4.1.15.2.16.2.5.1.3	INTEGER	read-only	The transmit connect speed when the modem connection was established.
INT callHistAsyEndTxSpeed	1.3.6.1.4.1.15.2.16.2.5.1.4	INTEGER	read-only	The ending transmit connect speed of the call.
INT callHistAsyTxBaudRate	1.3.6.1.4.1.15.2.16.2.5.1.5	INTEGER	read-only	The transmit rate at which symbols that carry data are generated. Symbol rate limits and options apply to V.34. Default is r2400(1).
INT callHistAsyRxBaudRate	1.3.6.1.4.1.15.2.16.2.5.1.6	INTEGER	read-only	The received rate at which symbols that carry data are received. Symbol rate limits and options apply to V.34. Default is r2400(1).
INT callHistAsyBeginSignalQ	1.3.6.1.4.1.15.2.16.2.5.1.7	INTEGER	read-only	Line signal quality at the beginning of the call. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable.
INT callHistAsyEndSignalQ	1.3.6.1.4.1.15.2.16.2.5.1.8	INTEGER	read-only	Line signal quality at the end of the call. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable.
INT callHistAsyBeginRxLineLevel	1.3.6.1.4.1.15.2.16.2.5.1.9	INTEGER	read-only	The receive signal level at the beginning of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem.
INT callHistAsyEndRxLineLevel	1.3.6.1.4.1.15.2.16.2.5.1.10	INTEGER	read-only	The receive signal level at the end of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem.
INT callHistAsyModulationMode	1.3.6.1.4.1.15.2.16.2.5.1.11	INTEGER	read-only	Negotiated modulation mode.
INT callHistAsyErrorProtocol	1.3.6.1.4.1.15.2.16.2.5.1.12	INTEGER	read-only	Error correction protocol used by the modem.
INT callHistAsyCompressionProtocol	1.3.6.1.4.1.15.2.16.2.5.1.13	INTEGER	read-only	Data compression protocol used by the modem. The compression protocol used by the modem is dependent on the error correction protocol used at the lower layer.
CTR callHistAsyTxPackets	1.3.6.1.4.1.15.2.16.2.5.1.14	Counter	read-only	The number of LAPM packets sent by the modem. This does not include retransmitted packets.
CTR callHistAsyTxPacketError	1.3.6.1.4.1.15.2.16.2.5.1.15	Counter	read-only	The number of LAPM packets retransmitted by the modem.
CTR callHistAsyRxPackets	1.3.6.1.4.1.15.2.16.2.5.1.17	Counter	read-only	The number of good LAPM packets received by the modem.
CTR callHistAsyRxPacketError	1.3.6.1.4.1.15.2.16.2.5.1.18	Counter	read-only	The number of bad LAPM packets (with CRC errors) received by the modem.
CTR callHistAsyRetrainReqSent	1.3.6.1.4.1.15.2.16.2.5.1.20	Counter	read-only	The number of retrains requested by the modem for this call.
CTR callHistAsyRetrainReqReceived	1.3.6.1.4.1.15.2.16.2.5.1.21	Counter	read-only	The number of retrain requests received by the modem from the remote modem for this call.
CTR callHistAsyRRNReqReceived	1.3.6.1.4.1.15.2.16.2.5.1.22	Counter	read-only	Number of rate renegotiation request (RRN) initiated by the remote modem.
CTR callHistAsyRRNReqSent	1.3.6.1.4.1.15.2.16.2.5.1.23	Counter	read-only	Number of rate renegotiation request (RRN) initiated by this modem.
INT callHistAsyRoundTripDelay	1.3.6.1.4.1.15.2.16.2.5.1.24	INTEGER	read-only	The round trip delay, in milliseconds, for this call. This object, along with the object callHistAsyFarEndEchoFreq, gives the echo characteristics of the call.
INT callHistAsyFarEndEchoFreq	1.3.6.1.4.1.15.2.16.2.5.1.25	INTEGER	read-only	Far end echo frequency offset, in Hertz. This object, along with the object callHistAsyRoundTripDelay, gives the echo characteristics of the call.
INT callHistAsyFarEndEchoLevel	1.3.6.1.4.1.15.2.16.2.5.1.26	INTEGER	read-only	Far end echo level, in decibels. The number represents the negative decibels.
INT callHistAsyChanFreqOffset	1.3.6.1.4.1.15.2.16.2.5.1.27	INTEGER	read-only	Channel frequency offset, in Hertz.
INT callHistAsyOscFreqOffset	1.3.6.1.4.1.15.2.16.2.5.1.28	INTEGER	read-only	Oscillator frequency offset, in PPM. Not always valid.
INT callHistAsySNR	1.3.6.1.4.1.15.2.16.2.5.1.29	INTEGER	read-only	Signal to noise ratio in decibels. Low is bad, high is good. Zero means not valid: no current connection, or connection is not V.34 (other protocols don't calculate this).
INT callHistAsyMdmDisconnectReason	1.3.6.1.4.1.15.2.16.2.5.1.30	INTEGER	read-only	Modem's reason for disconnecting the call. Modem's disconnect reason could be different from the system's reason for disconnecting the call. carrier-lost(8) - modem detected the loss of carrier. The time (delay) from loss of carrier until the modem disconnects is determined by MIB object mdmCfgLineCarrierDisconnect. retrain-timeout(9) - modem failed to retrain.
INT callHistAsyx2Status	1.3.6.1.4.1.15.2.16.2.5.1.31	INTEGER	read-only	x2 phase bit map --------------------- \| 4 \| 3 \| 2 \| 1 \| 0 \| bits --------------------- \|DM \|P4 \|P3 \|P2 \|P1 \| --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 X2 In Phase 3 P4 = 1 X2 In Phase 4 DM = 1 X2 In Data Mode
INT callHistAsyx2RbsStatus	1.3.6.1.4.1.15.2.16.2.5.1.32	INTEGER	read-only	x2 raw bit signalling, bit map ------------------------- \| 5 \| 4 \| 3 \| 2 \| 1 \| 0 \| bits ------------------------- \|S5 \|S4 \|S3 \|S2 \|S1 \|S0 \| ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5
INT callHistAsyx2DigitalPadStatus	1.3.6.1.4.1.15.2.16.2.5.1.33	INTEGER	read-only	x2 attenuation
INT callHistAsyx2Shaping	1.3.6.1.4.1.15.2.16.2.5.1.34	INTEGER	read-only	Number of bits used for spectral shaping in one data frame (frame 0 - 6)
INT callHistAsyk56Status	1.3.6.1.4.1.15.2.16.2.5.1.35	INTEGER	read-only	k56 phase bit map --------------------- \| 4 \| 3 \| 2 \| 1 \| 0 \| bits --------------------- \|DM \|P4 \|P3 \|P2 \|P1 \| --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 K56 In Phase 3 P4 = 1 K56 In Phase 4 DM = 1 K56 In Data Mode
INT callHistAsyk56RbsStatus	1.3.6.1.4.1.15.2.16.2.5.1.36	INTEGER	read-only	k56 raw bit signalling, bit map ------------------------- \| 5 \| 4 \| 3 \| 2 \| 1 \| 0 \| bits ------------------------- \|S5 \|S4 \|S3 \|S2 \|S1 \|S0 \| ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5
INT callHistAsyk56DigitalPadStatus	1.3.6.1.4.1.15.2.16.2.5.1.37	INTEGER	read-only	k56 attenuation
INT callHistAsyk56Shaping	1.3.6.1.4.1.15.2.16.2.5.1.38	INTEGER	read-only	Number of bits used for spectral shaping in one data frame (frame 0 - 6)
INT callHistAsyk56Version	1.3.6.1.4.1.15.2.16.2.5.1.39	INTEGER	read-only	k56 version number
INT callHistAsySignalQ	1.3.6.1.4.1.15.2.16.2.5.1.40	INTEGER	read-only	Line signal quality at the end of the call. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable.
INT callHistAsyBeginModulation	1.3.6.1.4.1.15.2.16.2.5.1.41	INTEGER	read-only	Beginning negotiated modulation mode.
INT callHistAsyEndModulation	1.3.6.1.4.1.15.2.16.2.5.1.42	INTEGER	read-only	Ending negotiated modulation mode.
INT callHistAsyEndPumpState	1.3.6.1.4.1.15.2.16.2.5.1.43	INTEGER	read-only	End pump status.
INT callHistAsyx2SpeedReduction	1.3.6.1.4.1.15.2.16.2.5.1.44	INTEGER	read-only	Speed reduction due to spectral shaping: 0 no speed reduction 1 speed reduction of 1.333 kBps 2 speed reduction of 2.666 kBps 3 speed reduction of 4.0 kBps 4 speed reduction of 5.333 kBps 5 speed reduction of 6.666 kBps 6 speed reduction of 8.0 kBps
INT callHistAsyk56SpeedReduction	1.3.6.1.4.1.15.2.16.2.5.1.45	INTEGER	read-only	Speed reduction due to robbed bits: 0 no speed reduction 1 speed reduction of 2.0 kBps 2 speed reduction of 4.0 kBps 3 speed reduction of 6.0 kBps 4 speed reduction of 8.0 kBps
INT callHistAsyV90Status	1.3.6.1.4.1.15.2.16.2.5.1.46	INTEGER	read-only	V90 status (this is a bitmap): 1 = currently in V90 mode 2 = V90 detected in phase 1 4 = V90 detected in phase 2 8 = V90 through phase 3 16 = V90 through phase 4 32 = V90 in data mode 64 = V90 data mode at least once
INT callHistAsyV90ConstellationIndex0	1.3.6.1.4.1.15.2.16.2.5.1.47	INTEGER	read-only	Constellation index for symbol 0.
INT callHistAsyV90ConstellationIndex1	1.3.6.1.4.1.15.2.16.2.5.1.48	INTEGER	read-only	Constellation index for symbol 1
INT callHistAsyV90ConstellationIndex2	1.3.6.1.4.1.15.2.16.2.5.1.49	INTEGER	read-only	Constellation index for symbol 2
INT callHistAsyV90ConstellationIndex3	1.3.6.1.4.1.15.2.16.2.5.1.50	INTEGER	read-only	Constellation index for symbol 3
INT callHistAsyV90ConstellationIndex4	1.3.6.1.4.1.15.2.16.2.5.1.51	INTEGER	read-only	Constellation index for symbol 4
INT callHistAsyV90ConstellationIndex5	1.3.6.1.4.1.15.2.16.2.5.1.52	INTEGER	read-only	Constellation index for symbol 5
INT callHistAsyV90PADStatus	1.3.6.1.4.1.15.2.16.2.5.1.53	INTEGER	read-only	Digital attenuation in dB.
INT callHistAsyV90ShapingBits	1.3.6.1.4.1.15.2.16.2.5.1.54	INTEGER	read-only	Number of CSS redundancy bits.
INT callHistAsyV90LookAhead	1.3.6.1.4.1.15.2.16.2.5.1.55	INTEGER	read-only	Number of look ahead CSS frames.
INT callHistAsyV90ConstellationPower	1.3.6.1.4.1.15.2.16.2.5.1.56	INTEGER	read-only	V90 constellation power in -dBm.
INT callHistAsyV90HalfDuplexRRNRx	1.3.6.1.4.1.15.2.16.2.5.1.57	INTEGER	read-only	Number of received half-duplex RRNs.
callHistTaTable	1.3.6.1.4.1.15.2.16.2.6		not-accessible	A table of call history TA information/statistics.
callHistTaEntry	1.3.6.1.4.1.15.2.16.2.6.1		not-accessible	A row in the call history TA table.
INT callHistTaSpeed	1.3.6.1.4.1.15.2.16.2.6.1.1	INTEGER	read-only	The identifier of this TA bundle.
callHistSyncTable	1.3.6.1.4.1.15.2.16.2.7		not-accessible	A table of call history Sync information/statistics.
callHistSyncEntry	1.3.6.1.4.1.15.2.16.2.7.1		not-accessible	A row in the call history Sync table.
INT callHistSyncSpeed	1.3.6.1.4.1.15.2.16.2.7.1.1	INTEGER	read-only	The identifier of this Sync bundle.
callHistMpTable	1.3.6.1.4.1.15.2.16.2.8		not-accessible	A table of call history MP information/statistics.
callHistMpEntry	1.3.6.1.4.1.15.2.16.2.8.1		not-accessible	A row in the call history MP table.
INT callHistMpBundleIdx	1.3.6.1.4.1.15.2.16.2.8.1.1	INTEGER	read-only	The identifier of this MP bundle.
mdmCallStatsObjects	1.3.6.1.4.1.15.2.16.3
mdmCallStatTable	1.3.6.1.4.1.15.2.16.3.1		not-accessible	A table of modem call statistics.
mdmCallStatEntry	1.3.6.1.4.1.15.2.16.3.1.1		not-accessible	A row in the modem call statistics table.
INT mdmCallStatBeginRxSpeed	1.3.6.1.4.1.15.2.16.3.1.1.3	INTEGER	read-only	The receive connect speed at the time the call was established. Note: The agent will return zero if the modem is not in a busy state.
INT mdmCallStatCurrRxSpeed	1.3.6.1.4.1.15.2.16.3.1.1.4	INTEGER	read-only	The current receive connect speed of the call.
INT mdmCallStatBeginTxSpeed	1.3.6.1.4.1.15.2.16.3.1.1.5	INTEGER	read-only	The transmit connect speed at the time the call was established. Note: The agent will return zero if the modem is not in a busy state.
INT mdmCallStatCurrTxSpeed	1.3.6.1.4.1.15.2.16.3.1.1.6	INTEGER	read-only	The current transmit connect speed of the call.
INT mdmCallStatTxBaudRate	1.3.6.1.4.1.15.2.16.3.1.1.7	INTEGER	read-only	The rate at which symbols that carry data are generated. Symbol rate limits and options apply to the modem v.34. Default is r2400(1).
INT mdmCallStatRxBaudRate	1.3.6.1.4.1.15.2.16.3.1.1.8	INTEGER	read-only	The rate at which symbols that carry data are received. Symbol rate limits and options apply to the modem v.34. Default is r2400(1).
INT mdmCallStatBeginSignalQ	1.3.6.1.4.1.15.2.16.3.1.1.9	INTEGER	read-only	Line signal quality at the beginning of the call. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable.
INT mdmCallStatCurrSignalQ	1.3.6.1.4.1.15.2.16.3.1.1.10	INTEGER	read-only	Current line signal quality. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable.
INT mdmCallStatBeginRxLineLevel	1.3.6.1.4.1.15.2.16.3.1.1.11	INTEGER	read-only	The receive signal level at the beginning of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem.
INT mdmCallStatCurrRxLineLevel	1.3.6.1.4.1.15.2.16.3.1.1.12	INTEGER	read-only	The current receive signal level of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem.
INT mdmCallStatModulationMode	1.3.6.1.4.1.15.2.16.3.1.1.13	INTEGER	read-only	Negotiated modulation mode.
INT mdmCallStatErrorProtocol	1.3.6.1.4.1.15.2.16.3.1.1.14	INTEGER	read-only	Error correction protocol used by the modem.
INT mdmCallStatCompressionProtocol	1.3.6.1.4.1.15.2.16.3.1.1.15	INTEGER	read-only	Data compression protocol used by the modem. The compression protocol used by the modem is dependent on the error correction protocol used at the lower layer.
CTR mdmCallStatTxPackets	1.3.6.1.4.1.15.2.16.3.1.1.16	Counter	read-only	The number of LAPM packets sent by the modem. This does not include retransmitted packets.
CTR mdmCallStatTxPacketError	1.3.6.1.4.1.15.2.16.3.1.1.17	Counter	read-only	The number of LAPM packets retransmitted by the modem.
CTR mdmCallStatRxPackets	1.3.6.1.4.1.15.2.16.3.1.1.19	Counter	read-only	The number of good LAPM packets received by the modem.
CTR mdmCallStatRxPacketError	1.3.6.1.4.1.15.2.16.3.1.1.20	Counter	read-only	The number of bad LAPM packets (with CRC errors) received by the modem.
CTR mdmCallStatRetrainReqSent	1.3.6.1.4.1.15.2.16.3.1.1.22	Counter	read-only	The number of retrains requested by the modem for this call.
CTR mdmCallStatRetrainReqReceived	1.3.6.1.4.1.15.2.16.3.1.1.23	Counter	read-only	The number of retrain requests received by the modem from the remote modem for this call.
CTR mdmCallStatRRNReqReceived	1.3.6.1.4.1.15.2.16.3.1.1.24	Counter	read-only	Number of rate renegotiation request (RRN) initiated by the remote modem.
CTR mdmCallStatRRNReqSent	1.3.6.1.4.1.15.2.16.3.1.1.25	Counter	read-only	Number of rate renegotiation request (RRN) initiated by this modem.
INT mdmCallStatRoundTripDelay	1.3.6.1.4.1.15.2.16.3.1.1.26	INTEGER	read-only	The round trip delay, in milliseconds, for this call. This object alongwith the object, mdmCallStatFarEndEchoFreq, gives the echo characteristics of the call.
INT mdmCallStatFarEndEchoFreq	1.3.6.1.4.1.15.2.16.3.1.1.27	INTEGER	read-only	Far end echo frequency offset, in Hertz. This object alongwith the object, mdmCallStatRoundTripDelay, gives the echo characteristics of the call.
INT mdmCallStatFarEndEchoLevel	1.3.6.1.4.1.15.2.16.3.1.1.28	INTEGER	read-only	Far end echo level, in decibels. The number represents the negative decibels.
INT mdmCallStatChanFreqOffset	1.3.6.1.4.1.15.2.16.3.1.1.29	INTEGER	read-only	Channel frequency offset, in Hertz.
INT mdmCallStatOscFreqOffset	1.3.6.1.4.1.15.2.16.3.1.1.30	INTEGER	read-only	Oscillator frequency offset, in PPM. Not always valid.
INT mdmCallStatSNR	1.3.6.1.4.1.15.2.16.3.1.1.31	INTEGER	read-only	Signal to noise ratio in decibels. Low is bad, high is good. Zero means not valid: no current connection, or connection is not V.34 (other protocols don't calculate this).
INT mdmCallStatx2Status	1.3.6.1.4.1.15.2.16.3.1.1.32	INTEGER	read-only	x2 phase bit map --------------------- \| 4 \| 3 \| 2 \| 1 \| 0 \| bits --------------------- \|DM \|P4 \|P3 \|P2 \|P1 \| --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 X2 In Phase 3 P4 = 1 X2 In Phase 4 DM = 1 X2 In Data Mode
INT mdmCallStatx2RbsStatus	1.3.6.1.4.1.15.2.16.3.1.1.33	INTEGER	read-only	x2 raw bit signalling, bit map ------------------------- \| 5 \| 4 \| 3 \| 2 \| 1 \| 0 \| bits ------------------------- \|S5 \|S4 \|S3 \|S2 \|S1 \|S0 \| ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5
INT mdmCallStatx2DigitalPadStatus	1.3.6.1.4.1.15.2.16.3.1.1.34	INTEGER	read-only	x2 attenuation
INT mdmCallStatx2Shaping	1.3.6.1.4.1.15.2.16.3.1.1.35	INTEGER	read-only	x2 - Number of bits used for spectral shaping in one data frame (frame 0 - 6)
INT mdmCallStatk56Status	1.3.6.1.4.1.15.2.16.3.1.1.36	INTEGER	read-only	k56 phase bit map --------------------- \| 4 \| 3 \| 2 \| 1 \| 0 \| bits --------------------- \|DM \|P4 \|P3 \|P2 \|P1 \| --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 K56 In Phase 3 P4 = 1 K56 In Phase 4 DM = 1 K56 In Data Mode
INT mdmCallStatk56RbsStatus	1.3.6.1.4.1.15.2.16.3.1.1.37	INTEGER	read-only	k56 raw bit signalling, bit map ------------------------- \| 5 \| 4 \| 3 \| 2 \| 1 \| 0 \| bits ------------------------- \|S5 \|S4 \|S3 \|S2 \|S1 \|S0 \| ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5
INT mdmCallStatk56DigitalPadStatus	1.3.6.1.4.1.15.2.16.3.1.1.38	INTEGER	read-only	k56 attenuation
INT mdmCallStatk56Shaping	1.3.6.1.4.1.15.2.16.3.1.1.39	INTEGER	read-only	k56 - Number of bits used for spectral shaping in one data frame (frame 0 - 6)
INT mdmCallStatk56Version	1.3.6.1.4.1.15.2.16.3.1.1.40	INTEGER	read-only	k56 version number
INT mdmCallStatWANUnitNumber	1.3.6.1.4.1.15.2.16.3.1.1.41	INTEGER	read-only	The physical WAN module unit number in the RAC that uses WAN modules. The range is 1 to anxt1Total. Use anxt1WanModuleTable to retrieve the unit's ifIndex number.(For R14.1 and later releases, WAN1=1001 and WAN2 = 1002 always
INT mdmCallStatChannel	1.3.6.1.4.1.15.2.16.3.1.1.42	INTEGER	read-only	A number from 1 to anxt1TotChan that identifies which DS0 channel handled the call.
portaction	1.3.6.1.4.1.15.2.16.4
portActionTable	1.3.6.1.4.1.15.2.16.4.1		not-accessible	A table of port actions
portActionEntry	1.3.6.1.4.1.15.2.16.4.1.1		not-accessible	A row in the portActionTable.
INT portActionDeviceType	1.3.6.1.4.1.15.2.16.4.1.1.1	INTEGER	read-only	An enumerated integer indicating the device type. asy(1) - the call is assigned internally to an asynchronous device (async port). syn(9) - the call is handled internally by a synchronous device (sync port). ta(10) - the call is handled internally by a ta device (ta port). mp(12) - pseudo-session, Multi-link PPP bundle head. vpn(13) - Virtual Private Network. gen-sync(14) - General Sync port.
INT portActionDeviceNumber	1.3.6.1.4.1.15.2.16.4.1.1.2	INTEGER	read-only	The one-based device (port) number the call is assigned to.
INT portActionResetPort	1.3.6.1.4.1.15.2.16.4.1.1.3	INTEGER	read-write	Setting this object to execute will reset the specified port terminating all sessions on the port. Reading this object will allways return ready(1). Setting this object is equivalent to the reset port command in cli/admin.

RFC description

Manages active call information, call history, and modem call statistics on Xylogics access servers.

Start monitoring Xylogics Remote Annex communication/access servers (active-call/modem-call-statistics status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download XYLO-CALLMGMT-MIB

What Is XYLO-CALLMGMT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description