All MIBs › XYLO-CALLMGMT-MIB › activeCallConfiguredType
activeCallConfiguredType
Module: XYLO-CALLMGMT-MIB
OID (symbolic): XYLO-CALLMGMT-MIB::activeCallConfiguredType
OID (numeric): 1.3.6.1.4.1.15.2.16.1.2.1.20
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The type (mode) of the port at the time of the connection.
cli - allows an incoming session access to the CLI. The CLI provides access to the network and connections to other hosts via the telnet, connect, rlogin and tn3270 commands. slip - allows a port to perform as a network interface using SLIP. IP packets are encapsulated by SLIP. ppp - allows a port to perform as a network interface using PPP. Packets of several protocols are encapsulated by PPP. arap - allows a port to perform as a network interface using ARAP. slave - allows a port to accept TCP connections over the network. connect - allows a port to communicate with a LAT host via the connect command. rlogin - allows a port to communicate via the rlogin command. telnet - allows a port to communicate via the telnet command. tn3270 - allows a port to communicate via the tn3270 command.
What is activeCallConfiguredType?
The configured port mode at connection time, e.g. cli(1), ppp(7), or arap(8), telling an admin what kind of session the port was set up to provide independent of what protocol actually negotiated on the wire (see activeCallConnectionType).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.16.1.2.1.20 snmpwalk -v2c -c public <target> XYLO-CALLMGMT-MIB::activeCallConfiguredType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.16.1.2.1.20.1 snmpget -v2c -c public <target> XYLO-CALLMGMT-MIB::activeCallConfiguredType.1
Start monitoring Xylogics Remote Annex communication/access servers (active-call/modem-call-statistics status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLO-CALLMGMT-MIB::activeCallConfiguredType OID value, configure state conditions and alerts, and monitor any Xylogics Remote Annex communication/access servers (active-call/modem-call-statistics status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.16 | callmgmt | XYLO-MIB-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.15.2.16.1 | activecall | XYLO-CALLMGMT-MIB |
| 1.3.6.1.4.1.15.2.16.1.2 | actCallTable | XYLO-CALLMGMT-MIB |
| 1.3.6.1.4.1.15.2.16.1.2.1 | actCallEntry | XYLO-CALLMGMT-MIB |
| 1.3.6.1.4.1.15.2.16.1.2.1.20 | activeCallConfiguredType | XYLO-CALLMGMT-MIB |