All MIBs › XYLO-CALLMGMT-MIB › activeCallAsyBeginRxLineLevel
activeCallAsyBeginRxLineLevel
Module: XYLO-CALLMGMT-MIB
OID (symbolic): XYLO-CALLMGMT-MIB::activeCallAsyBeginRxLineLevel
OID (numeric): 1.3.6.1.4.1.15.2.16.1.3.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The receive signal level at the beginning of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm).
Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem.
What is activeCallAsyBeginRxLineLevel?
The receive signal level at the start of the call, in dBm, reported as a positive number that actually represents the negative of the real dBm value; expected values are roughly -12 to -30, with anything weaker than -11 (too strong) causing modem problems. Admins use this initial reading as a baseline to compare against activeCallAsyCurrRxLineLevel as the call progresses.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.16.1.3.1.11 snmpwalk -v2c -c public <target> XYLO-CALLMGMT-MIB::activeCallAsyBeginRxLineLevel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.16.1.3.1.11.1 snmpget -v2c -c public <target> XYLO-CALLMGMT-MIB::activeCallAsyBeginRxLineLevel.1
Start monitoring Xylogics Remote Annex communication/access servers (active-call/modem-call-statistics status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLO-CALLMGMT-MIB::activeCallAsyBeginRxLineLevel OID value, configure state conditions and alerts, and monitor any Xylogics Remote Annex communication/access servers (active-call/modem-call-statistics status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.15 | xylogics | ANNEX-MIB |
| 1.3.6.1.4.1.15.2 | annex | ANNEX-MIB |
| 1.3.6.1.4.1.15.2.16 | callmgmt | XYLO-MIB-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.15.2.16.1 | activecall | XYLO-CALLMGMT-MIB |
| 1.3.6.1.4.1.15.2.16.1.3 | actCallAsyTable | XYLO-CALLMGMT-MIB |
| 1.3.6.1.4.1.15.2.16.1.3.1 | actCallAsyEntry | XYLO-CALLMGMT-MIB |
| 1.3.6.1.4.1.15.2.16.1.3.1.11 | activeCallAsyBeginRxLineLevel | XYLO-CALLMGMT-MIB |