XYLO-CALLMGMT-MIB :: activeCallAsyCurrRxLineLevel

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › XYLO-CALLMGMT-MIB › activeCallAsyCurrRxLineLevel

activeCallAsyCurrRxLineLevel

Module: XYLO-CALLMGMT-MIB

OID (symbolic): XYLO-CALLMGMT-MIB::activeCallAsyCurrRxLineLevel

OID (numeric): 1.3.6.1.4.1.15.2.16.1.3.1.12

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The current receive signal level of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm).

Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem.

What is activeCallAsyCurrRxLineLevel?

The current receive signal level of the call in dBm (again reported as a positive number representing a negative dBm value), expected in the roughly -12 to -30 range. A level weaker than -11 signals the incoming line is too strong and is causing the modem trouble.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15.2.16.1.3.1.12
snmpwalk -v2c -c public <target> XYLO-CALLMGMT-MIB::activeCallAsyCurrRxLineLevel

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.15.2.16.1.3.1.12.1
snmpget -v2c -c public <target> XYLO-CALLMGMT-MIB::activeCallAsyCurrRxLineLevel.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> activeCallAsyCurrRxLineLevel.1

Start monitoring Xylogics Remote Annex communication/access servers (active-call/modem-call-statistics status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XYLO-CALLMGMT-MIB::activeCallAsyCurrRxLineLevel OID value, configure state conditions and alerts, and monitor any Xylogics Remote Annex communication/access servers (active-call/modem-call-statistics status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.15xylogicsANNEX-MIB
1.3.6.1.4.1.15.2annexANNEX-MIB
1.3.6.1.4.1.15.2.16callmgmtXYLO-MIB-SMI
Numeric OIDNameModule
1.3.6.1.4.1.15.2.16.1activecallXYLO-CALLMGMT-MIB
1.3.6.1.4.1.15.2.16.1.3actCallAsyTableXYLO-CALLMGMT-MIB
1.3.6.1.4.1.15.2.16.1.3.1actCallAsyEntryXYLO-CALLMGMT-MIB
1.3.6.1.4.1.15.2.16.1.3.1.12activeCallAsyCurrRxLineLevelXYLO-CALLMGMT-MIB